4 files changed, 204 insertions, 24 deletions

diff --git a/noncore/apps/opie-console/iolayerbase.cpp b/noncore/apps/opie-console/iolayerbase.cpp
index 47f9e76..ba7c86e 100644
--- a/noncore/apps/opie-console/iolayerbase.cpp
+++ b/noncore/apps/opie-console/iolayerbase.cpp
@@ -4,6 +4,7 @@
 #include <qbuttongroup.h>
 #include <qhbuttongroup.h>
 #include <qradiobutton.h>
+#include <qhbox.h>
 
 #include "iolayerbase.h"
 
@@ -28,6 +29,19 @@ namespace {
         id_baud_9600
     };
 
+    enum DataIds {
+        id_data_5,
+        id_data_6,
+        id_data_7,
+        id_data_8
+    };
+
+    enum StopIds {
+        id_stop_1,
+        id_stop_1_5,
+        id_stop_2
+    };
+
 }
 
 
@@ -37,35 +51,35 @@ IOLayerBase::IOLayerBase( QWidget* par,  const char* name )
     m_speedLabel = new QLabel(tr("Speed"), this );
     m_speedBox = new QComboBox(this );
 
-    m_groupFlow = new QButtonGroup(tr("Flow control"),this );
+    m_groupFlow = new QHButtonGroup(tr("Flow control"),this );
     m_flowHw = new QRadioButton(tr("Hardware"), m_groupFlow );
     m_flowSw = new QRadioButton(tr("Software"), m_groupFlow );
     m_flowNone = new QRadioButton( tr("None"), m_groupFlow );
 
-    m_groupParity = new QButtonGroup(tr("Parity"), this );
+    m_groupParity = new QHButtonGroup(tr("Parity"), this );
     m_parityNone = new QRadioButton(tr("None"), m_groupParity );
     m_parityOdd = new QRadioButton(tr("Odd"), m_groupParity );
     m_parityEven = new QRadioButton(tr("Even"), m_groupParity );
 
+    m_groupData = new QHButtonGroup(tr("Data Bits"), this);
+    m_data5 = new QRadioButton(tr("5"), m_groupData );
+    m_data6 = new QRadioButton(tr("6"), m_groupData );
+    m_data7 = new QRadioButton(tr("7"), m_groupData );
+    m_data8 = new QRadioButton(tr("8"), m_groupData );
+
+    m_groupStop = new QHButtonGroup(tr("Stop Bits"), this );
+    m_stop1 = new QRadioButton(tr("1"), m_groupStop );
+    m_stop15 = new QRadioButton(tr("1.5"), m_groupStop );
+    m_stop2 = new QRadioButton(tr("2"), m_groupStop );
+
+
     m_lroot = new QVBoxLayout( this );
     m_lroot->add(m_speedLabel );
     m_lroot->add(m_speedBox );
-    m_lroot->setStretchFactor(m_speedLabel, 1);
-    m_lroot->setStretchFactor(m_speedBox, 1 );
-
-    m_hbox = new QHBoxLayout(m_groupFlow, 2 );
-    m_hbox->add(m_flowHw );
-    m_hbox->add(m_flowSw );
-    m_hbox->add(m_flowNone );
     m_lroot->add(m_groupFlow );
-    m_lroot->setStretchFactor(m_groupFlow, 2 );
-
-    m_hboxPar = new QHBoxLayout( m_groupParity, 2 );
-    m_hboxPar->add(m_parityOdd );
-    m_hboxPar->add(m_parityEven );
-    m_hboxPar->add(m_parityNone );
     m_lroot->add(m_groupParity );
-    m_lroot->setStretchFactor(m_groupParity, 2 );
+    m_lroot->add( m_groupData );
+    m_lroot->add( m_groupStop );
     m_lroot->addStretch(2);
 
     // profiles
@@ -128,6 +142,41 @@ void IOLayerBase::setSpeed( Speed sp ) {
     }
     m_speedBox->setCurrentItem(index );
 }
+
+void IOLayerBase::setData( Data data ) {
+    switch( data ) {
+    case Data_Five:
+        m_data5->setChecked( true );
+        break;
+    case Data_Six:
+        m_data6->setChecked( true );
+        break;
+    case Data_Seven:
+        m_data7->setChecked( true );
+        break;
+    default:
+        m_data8->setChecked( true );
+        break;
+    }
+}
+
+
+void IOLayerBase::setStop( Stop stop  ) {
+    switch( stop ) {
+    case Stop_Two:
+        m_stop2->setChecked( true );
+        break;
+    case Stop_OnePointFive:
+        m_stop15->setChecked( true );
+        break;
+    default:
+        m_stop1->setChecked( true );
+        break;
+    }
+}
+
+
+
 IOLayerBase::Flow IOLayerBase::flow()const {
     if (m_flowHw->isChecked() ) {
         return Hardware;
@@ -167,3 +216,24 @@ IOLayerBase::Speed IOLayerBase::speed()const{
         break;
     }
 }
+IOLayerBase::Data IOLayerBase::data()const {
+    if ( m_data5->isChecked() ) {
+        return Data_Five;
+    } else if  ( m_data6->isChecked() ) {
+        return Data_Six;
+    } else if  ( m_data7->isChecked() ) {
+        return Data_Seven;
+    } else {
+        return Data_Eight;
+    }
+}
+IOLayerBase::Stop IOLayerBase::stop()const {
+    if ( m_stop2->isChecked() ) {
+        return Stop_Two;
+    } else if  ( m_stop15->isChecked() ) {
+        return Stop_OnePointFive;
+    } else {
+        return Stop_One;
+    }
+}
+
diff --git a/noncore/apps/opie-console/iolayerbase.h b/noncore/apps/opie-console/iolayerbase.h
index 74de46a..e1b96df 100644
--- a/noncore/apps/opie-console/iolayerbase.h
+++ b/noncore/apps/opie-console/iolayerbase.h
@@ -22,25 +22,34 @@ public:
                 Baud_38400,
                 Baud_19200,
                 Baud_9600 };
+    enum Data { Data_Five =5, Data_Six =6, Data_Seven=7, Data_Eight=8 };
+    enum Stop { Stop_One =1, Stop_OnePointFive=15, Stop_Two=2 };
+
     IOLayerBase( QWidget* base,  const char* name = 0l);
     ~IOLayerBase();
 
     void setFlow( Flow flo );
     void setParity( Parity par );
     void setSpeed( Speed speed );
+    void setData( Data data );
+    void setStop( Stop stop );
 
     Flow flow()const;
     Parity parity()const;
     Speed speed()const;
+    Data data()const;
+    Stop stop()const;
 private:
     QVBoxLayout* m_lroot;
     QLabel* m_speedLabel;
     QComboBox* m_speedBox;
-    QButtonGroup* m_groupFlow;
+    QButtonGroup* m_groupFlow,  *m_groupData, *m_groupStop ;
     QRadioButton *m_flowHw, *m_flowSw, *m_flowNone;
 
     QButtonGroup* m_groupParity;
     QRadioButton *m_parityOdd, *m_parityEven, *m_parityNone;
+    QRadioButton *m_data5, *m_data6, *m_data7, *m_data8;
+    QRadioButton *m_stop1, *m_stop15, *m_stop2;
     QHBoxLayout* m_hbox;
     QHBoxLayout* m_hboxPar;
 };
diff --git a/noncore/apps/opie-console/modemconfigwidget.cpp b/noncore/apps/opie-console/modemconfigwidget.cpp
index ec83b9f..ce44dab 100644
--- a/noncore/apps/opie-console/modemconfigwidget.cpp
+++ b/noncore/apps/opie-console/modemconfigwidget.cpp
@@ -34,8 +34,9 @@ ModemConfigWidget::ModemConfigWidget( const QString& name, QWidget* parent,
 
     QLabel* telLabel = new QLabel( this );
     telLabel->setText( tr( "Enter telefon number here:" ) );
-    m_telNumber = new QLineEdit( this );
+    // m_telNumber = new QLineEdit( this );
     QHBox *buttonBox = new QHBox( this );
+    m_telNumber = new QLineEdit( buttonBox );
     QPushButton *atButton = new QPushButton( buttonBox );
     atButton->setText( tr( "AT commands" ) );
     // disabled for now
@@ -46,15 +47,14 @@ ModemConfigWidget::ModemConfigWidget( const QString& name, QWidget* parent,
     dialButton->setText( tr( "Enter number" ) );
     connect( dialButton, SIGNAL( clicked() ), this, SLOT( slotDial() ) );
 
-
     m_base = new IOLayerBase( this, "base" );
 
     m_lay->addWidget( m_device );
     m_lay->addWidget( m_deviceCmb );
     m_lay->addWidget( telLabel );
-    m_lay->addWidget( m_telNumber );
     m_lay->addWidget( buttonBox );
     m_lay->addWidget( m_base );
+    m_lay->addStretch( 0 );
 
     m_deviceCmb->insertItem( "/dev/ttyS0" );
     m_deviceCmb->insertItem( "/dev/ttyS1" );
@@ -71,6 +71,8 @@ void ModemConfigWidget::load( const Profile& prof ) {
     int rad_flow = prof.readNumEntry( "Flow" );
     int rad_parity = prof.readNumEntry( "Parity" );
     int speed = prof.readNumEntry( "Speed" );
+    int dbits = prof.readNumEntry("DataBits");
+    int sbits = prof.readNumEntry("StopBits");
     QString number = prof.readEntry( "Number" );
 
     if ( !number.isEmpty() ) {
@@ -113,6 +115,27 @@ void ModemConfigWidget::load( const Profile& prof ) {
         break;
     }
 
+
+    if ( dbits == 5) {
+        m_base->setData( IOLayerBase::Data_Five );
+    } else if (rad_flow == 6) {
+        m_base->setData( IOLayerBase::Data_Six );
+    } else if (rad_flow == 7) {
+        m_base->setData( IOLayerBase::Data_Seven );
+    } else {
+        m_base->setData( IOLayerBase::Data_Eight );
+    }
+
+    if ( sbits == 2) {
+        m_base->setStop( IOLayerBase::Stop_Two );
+    } else if ( sbits == 15 ) {
+        m_base->setStop( IOLayerBase::Stop_OnePointFive );
+    } else {
+        m_base->setStop( IOLayerBase::Stop_One );
+    }
+
+
+
     if ( prof.readEntry( "Device" ).isEmpty() ) {
         return;
     }
@@ -127,8 +150,8 @@ void ModemConfigWidget::load( const Profile& prof ) {
  * parity
  */
 void ModemConfigWidget::save( Profile& prof ) {
-    int flow, parity, speed;
-    flow = parity = speed = 0;
+    int flow, parity, speed, data, stop;
+    flow = parity = speed = data = stop = 0;
     prof.writeEntry( "Device", m_deviceCmb->currentText() );
 
 
@@ -174,9 +197,38 @@ void ModemConfigWidget::save( Profile& prof ) {
         break;
     }
 
+    switch( m_base->data() ) {
+    case IOLayerBase::Data_Five:
+        data = 5;
+        break;
+    case IOLayerBase::Data_Six:
+        data = 6;
+        break;
+    case IOLayerBase::Data_Seven:
+        data = 7;
+        break;
+    case IOLayerBase::Data_Eight:
+        data = 8;
+        break;
+    }
+
+    switch( m_base->stop() ) {
+    case IOLayerBase::Stop_One:
+        stop = 1;
+        break;
+    case IOLayerBase::Stop_OnePointFive:
+        stop = 15;
+        break;
+    case IOLayerBase::Stop_Two:
+        stop = 2;
+        break;
+    }
+
     prof.writeEntry( "Flow", flow );
     prof.writeEntry( "Parity", parity );
     prof.writeEntry( "Speed", speed );
+    prof.writeEntry("DataBits", data);
+    prof.writeEntry("StopBits", stop);
     prof.writeEntry( "Number", m_telNumber->text() );
 
 
diff --git a/noncore/apps/opie-console/serialconfigwidget.cpp b/noncore/apps/opie-console/serialconfigwidget.cpp
index 5c6d975..3edf723 100644
--- a/noncore/apps/opie-console/serialconfigwidget.cpp
+++ b/noncore/apps/opie-console/serialconfigwidget.cpp
@@ -50,6 +50,8 @@ void SerialConfigWidget::load( const Profile& prof ) {
     int rad_flow = prof.readNumEntry("Flow");
     int rad_parity = prof.readNumEntry("Parity");
     int speed = prof.readNumEntry("Speed");
+    int dbits = prof.readNumEntry("DataBits");
+    int sbits = prof.readNumEntry("StopBits");
 
     if (rad_flow == 1) {
         m_base->setFlow( IOLayerBase::Hardware );
@@ -86,6 +88,24 @@ void SerialConfigWidget::load( const Profile& prof ) {
         break;
     }
 
+    if ( dbits == 5) {
+        m_base->setData( IOLayerBase::Data_Five );
+    } else if (rad_flow == 6) {
+        m_base->setData( IOLayerBase::Data_Six );
+    } else if (rad_flow == 7) {
+        m_base->setData( IOLayerBase::Data_Seven );
+    } else {
+        m_base->setData( IOLayerBase::Data_Eight );
+    }
+
+    if ( sbits == 2) {
+        m_base->setStop( IOLayerBase::Stop_Two );
+    } else if ( sbits == 15 ) {
+        m_base->setStop( IOLayerBase::Stop_OnePointFive );
+    } else {
+        m_base->setStop( IOLayerBase::Stop_One );
+    }
+
     if ( prof.readEntry("Device").isEmpty() ) return;
     setCurrent( prof.readEntry("Device"), m_deviceCmb );
 
@@ -96,8 +116,8 @@ void SerialConfigWidget::load( const Profile& prof ) {
  * parity
  */
 void SerialConfigWidget::save( Profile& prof ) {
-    int flow, parity, speed ;
-    flow = parity = speed = 0;
+    int flow, parity, speed,  data, stop;
+    flow = parity = speed = data = stop = 0;
     prof.writeEntry("Device", m_deviceCmb->currentText() );
 
     switch( m_base->flow() ) {
@@ -143,7 +163,36 @@ void SerialConfigWidget::save( Profile& prof ) {
         break;
     }
 
+    switch( m_base->data() ) {
+    case IOLayerBase::Data_Five:
+        data = 5;
+        break;
+    case IOLayerBase::Data_Six:
+        data = 6;
+        break;
+    case IOLayerBase::Data_Seven:
+        data = 7;
+        break;
+    case IOLayerBase::Data_Eight:
+        data = 8;
+        break;
+    }
+
+    switch( m_base->stop() ) {
+    case IOLayerBase::Stop_One:
+        stop = 1;
+        break;
+    case IOLayerBase::Stop_OnePointFive:
+        stop = 15;
+        break;
+    case IOLayerBase::Stop_Two:
+        stop = 2;
+        break;
+    }
+
     prof.writeEntry("Flow",  flow);
     prof.writeEntry("Parity", parity);
     prof.writeEntry("Speed",  speed);
+    prof.writeEntry("DataBits", data);
+    prof.writeEntry("StopBits", stop);
 }