Diffstat (limited to 'docs/usermanual/usermanual.sgm') (more/less context) (ignore whitespace changes)
| -rw-r--r-- | docs/usermanual/usermanual.sgm | 693 |
1 files changed, 693 insertions, 0 deletions
diff --git a/docs/usermanual/usermanual.sgm b/docs/usermanual/usermanual.sgm new file mode 100644 index 0000000..1fe8c52 --- a/dev/null +++ b/docs/usermanual/usermanual.sgm @@ -0,0 +1,693 @@ +<!DOCTYPE book SYSTEM "/usr/local/sgml/4.2sgml/docbook.dtd"> +<book><title>Opie User Manual</title> +<part><title>Getting Started</title> +<chapter><title>What is Opie?</title> +<para> +Opie is a GUI (Graphical User Interface) for the Linux operating system (and +might work on other OSes as well). It was originally designed for handheld +computers (such as the Compaq/HP iPAQ and the Sharp Zaurus), but which could +probably function well in other environments requiring a light GUI, such as an +old laptop, or an internet kiosk. It is bassed upon QT/Embedded from Trolltech, +which is in turn a graphical environment designed for embedded applications, +based upon the QT toolkit. +</para> +<para> +Opie has been designed for devices with small screens, and a touchscreen input +device (ie, only one mouse click, and no constant mouse position), as well as +designed to fit in a relatively small amount of storage space (about 5 megabytes +for the base libraries and the launcher). +</para> +</chapter> +<chapter><title>Installation</title> +<section><title>iPAQ</title> +<para> +To install opie on an iPAQ, you will need a fresh Familiar installation (ie, +install Familiar, and stop before you do ipkg install task-complete or ipkg +install task-x), go to http://familiar.handhelds.org to get the latest version, +and to get installation instructions (again, stop after the initial boot and do +not install X, as it is not necessary, and will only take up space). +</para> + +<note> +<para> +Note: If you had qpe/qtopia installed previously, \emph{completely} remove it, +and remove the src line for it from your /etc/ipkg.conf file before attempting +to install opie. +</para> +</note> +<para> +Once you have Familiar installed, set up a network connection between your iPAQ +and the ouside world (again, see the Familiar site for instructions on this), +and then run this command: +<informalexample> +<literallayout> + echo src opie "http://131.152.105.154/feeds/ipaq/unstable/" \ + >> /etc/ipkg.conf +</literallayout> +</informalexample> +then, run: +<informalexample> +<literallayout> + ipkg update && ipkg install task-opie +</literallayout> +</informalexample> +If you have a 3100 or 3800 series iPAQ, run: +<informalexample> +<literallayout> + ipkg install qt-embedded-rotation +</literallayout> +</informalexample> +finally, start Opie with: +<informalexample> +<literallayout> + /etc/init.d/opie start +</literallayout> +</informalexample> +</para> + +<para> +Opie should now be running (if you should have to reboot, which is rare, Opie +will start automatically). From here, you can use either the ``Software'' +application in the Settings tab, or run ipkg from the command line to install +other Opie apps. Check out the various task-opie-* ipkgs to install various sets +of apps at once (you can always uninstall individual apps individually). You +will probably want to install opie-embeddedkonsole first, so you have access to +the command line in Opie. +</para> +</section> + +<section><title>Zaurus</title> +<para> +To completely install Opie on the Zaurus, you will have to install OpenZaurus, +which includes Opie. However, individual Opie applications will work fine on the +default Zaurus rom. Do not install Opie's launcher on a default Zaurus ROM +though. +</para> +</section> +</chapter> + +<chapter><title>Using Opie</title> +<para> +Now that Opie is installed and running, it's time to start using it. When you +first start Opie, you will see the ``Launcher'' from which you can start all of +your Applications, and the ``Taskbar'' along the bottom, where you can see all +the running applications, select an input method, and interact with the +installed ``applets''. +</para> + +<section><title>Getting Around</title> +<para> +Getting around in Opie is very easy, you simply click your stylus on whatever +icon or button you want to click on. The main difference between using the +stylus and using a mouse is that you cannot right click with a stylus, so things +that require a right click are kept to a minimum. However, it is sometimes +necessary to right click, and this is implemented with a ``press and hold''. +Any time you want to do something that you think would require a right click on +a normal pc, try pressing the stylus down and holding it still for a few +seconds. This usually opens up a context sensative menu, much like a right +click usually does on a desktop interface. +</para> +</section> + +<section><title>Launcher</title> +<para> +The Launcher behaves like the ``desktop'' on most PC GUIs. When no applications +are running or visible, you will have access to the Launcher. You can also map +a hardware key to bring the Launcher to the top without closing any of the +running applications (this is similar to ``minimising'' all the applications +that are running). +</para> +<para> +Along the top of the Launcher you will see a list of tabs which function as +categories for your applications. You can click on the tab for the category you +want to view, and then click on the icon for the application that you wish to +launch. By default, there will be an Applications tab and a Settings tab (if +you install any games, they will appear in the Games tab). When new +applications are installed, they will usually appear in one of these three tabs, +or in a tab of their own. To add or delete tabs or to move applications between +the tabs, you can use the Tab Manager application, or you can edit them by hand, +by changing the directories in /opt/QtPalmtop/apps. +</para> +<para> +There is also a tab to the far right called the ``Documents'' tab, which allows +you to quickly open your most often used documents. You can click on a document +to open it up in the proper application. For help on adding files to the +Documents tab see \ref{docadd} on page \pageref{docadd} +</para> +</section> + +<section><title>Taskbar</title> +<para> +Opie has a ``Taskbar'' that always runs along the bottom of the screen in Opie, +except for a few ``fullscreen'' applications that cover it up. The Taskbar is +what lets you select which input method you would like to use, shows what +applications are running, and is also where the ``applets'' draw their icons. +On the left of the Taskbar is an ``O'' button that opens a menu which has an +entry for every tab in the Launcher, allowing you to star an applications +without going back to the Launcher, or quiting the application that you are +running. On the right hand side of the Taskbar, you will probably see a clock +(unless you installed task-opie-minimal), which is actually just another applet +that draws the time instead of an icon. +</para> +<para> +When an application is run, it adds its icon to the Taskbar, starting from the +right side of the input method icon, with new application's icons appearing to +the right. If you click on the icon for an application, it will be brought to +the screen, allowing you to interact with it. +</para> +<para> +To the right of the ``O'' menu you will see an icon for the currently selected +input method. Clicking this will bring up the input method, allowing you to +type into the currently running application. To the right of the input method +icon is a small arrow pointing up, which will open a menu of all the currently +installed input methods when clicked. When you select one of these, it will +become the current input method, with its icon replacing the previous one. +</para> +</section> + +<section><title>Dialogs</title> +<para> +In Opie, dialogs, as well as some applications, have a button labeled ``Ok'' on +the right side of the window title bar, in addition to the normal ``x''. For +dialogs, the ``Ok'' button will apply your changes and close the window, while +the ``x'' will cancel them before closing the window (for people used to most +desktop GUI's the ``Ok'' and ``x'' behave like the ``Ok'' and ``Cancel'' buttons +you would normally see in the bottom right of the dialog window). +</para> +<para> +For applications that have an ``Ok'' button as well as the ``x'' button that all +applications have, the ``Ok'' button will usually save the current file and then +close the application, while the ``x'' button will close the application without +saving. +</para> +</section> +</chapter> + +<chapter><title>Upgrading</title> +<para> +First, you should shutdown Opie from the ``Shutdown'' app in the Settings tab. +Normally, simply running +<informalexample> +<literallayout> + ipkg update && ipkg upgrade +</literallayout> +</informalexample> +will upgrade Opie. However, if you currently have a version with the 1.5.0 +version number, you will have to upgrade it differently, because Opie now uses a +different version number (the 1.5.0 was Qtopia's version number, we now use our +own). To upgrade from one of these older versions, run: +<informalexample> +<literallayout> + ipkg update + ipkg install opie-update +</literallayout> +</informalexample> +Opie should then be upgraded. +</para> +</chapter> +</part> + +<part><title>Applications</title> +<chapter><title>Contacts</title> +<para> +Contacts is a way to keep track of all the people you know, and how to contact +them. as well as other information, such as their birthday, the company they +work for, etc. +<para> + +<section><title>Adding Contacts</title> +<para> +To Add a user, go to <GUImenu>Contact</GUImenu><GUIMenuItem>Add</GUIMenuItem>, +or click the add icon in the toolbar (looks like a blank piece of paper). +First, you need to give the person a name. You can do this by either entering +their name in the name field, or by pressing ``Full Name...'', which will open +up a new dialog that lets you enter each part of their name individually. Three +of the entry fields have pulldown menus instead of labels that let you set which +parameter these input fields control. The File As field lets you control how +their name is displayed in the main view, use the pulldown arrow to select from +some common ways of ordering their first and last names, or type in a custom +one. You can also select a category for the user to be filed under, and clicking +the button labeled ``...'' lets you edit the available catagories (these are +convinient for displaying just the contacts you want when you have a lot of +them). +</para> +<para> +The address tab lets you edit the contact's buisness and home addresses (select +which one you want to change from the pulldown menu at the top). The bottom +field behaves just like the three custom fields in the ``General'' tab (and if +you select the same thing from the pulldown list, it will modify the same +parameter). +</para> +<para> +The Details tab is used for miscelaneous things like the person's position, the +name of their spouse, etc. +</para> +<para> +When you are done, click ``Ok'' in the top right of the screen (you can always +edit their profile later), click the ``x'' to cancel, and not add the contact. +</para> +</section> +<section><title>Editing Contacts</title> +<para> +To edit the contacts, select the person you want to edit, anc click the pencil +icon, or go to <GUIMenu>Contact</GUIMenu><GUIMenuItem>Edit</GUIMenuItem>, and it +will open up the same dialog used to add a user, except their information that +is already entered will already be filled in. To finalise the changes, click +``Ok'', or to cancel them, click ``x''. +</para> +</section> + +<section><title>Deleting Contacts</title> +<para> +To delete a contact, select the person from the list of contacts, and click the +trash can icon, or go to Contact \begin{math}\rightarrow\end{math}Delete. A +dialog will pop up asking if you want to actually delete that contact, click yes +to delete it, no will cancel. +</para> +</section> + +<section><title>Editing Contacts</title> +<para> +To find a specific person, click the find icon (green magnifying glass), or go +to <GUIMenu>Contact</GUIMenu><GUIMenuItem>Find</GUIMenuItem>. A dialog will pop +up, and in the ``Find what'' input, enter the string you want to search for. You +can also select if you want the search to be case sensative, and if you want it +to search backwards from the currently selected user. The Category drop down +menu lets you search only a specific category (``All'' to search all of them). +When you click ``Find'', it will start search for the string in all the fields +in all the contacts. When it finds a match, it will highlight the user in the +main view. You can use this to search for (as an example) who a certain phone +number belongs to, by entering the phone number in the ``find what'' field, and +clicking ``Find''. +</para> +</section> + +<section><title>Viewing Contacts</title> +<para> +To view only the contacts in a certain category, go to the View menu, and check +the categories you want to view. +</para> +<para> +The list of letters on the bottom of the window lets you look at only the +contacts who's names begin with that letter. These work much like entering text +on a mobile phone. For example, to view all the contacts whos name starts with +``B'', press the ``ABC'' group twice (since ``B'' is the second letter in that +group). To go back to displaying all of the letters, click it two more times +(pressing it four times brings you back to all the letters, so you pressed it 2 +times to get to ``B'' and 2 more times to get back to all letters. 2+2=4). +</para> +</section> + +<section><title>Personal Details</title> +<para> +Change your personal details by going to <GUIMenu>Contact </GUIMenu> +<GUIMenuItem>My Personal Details</GUIMenuItem>. This is used in today to +display who the device belongs to, as well as other apps. +</para> +</section> +</chapter> + +<chapter><title>Calendar</title> +<para> +The Calendar is a way to keep track of all your appointments, birthdays, +meetings, or any other event that you would put in a calendar. +</para> + +<section><title>Navigation</title> +<para> +Navigation in the Calendar is simple. Along the top are five different buttons +that allow you to set the type of view, which correspond to the five items in +the ``View'' menu. Each one (except for ``Today'') changes the amount of time +shown on the screen. ``Day'' shows one day, ``Week'' one week, etc. Today is the +same as Day, except that it automatically sets the view to the current day. +</para> +<section><title>The Day view</title> +<para> +The day view shows your day divided up into blocks representing each hour. At +the top is the navigation bar, wher you will see a row of buttons, which +represent the days of the current week, and on the left and right sides of the +navigation bar are arrows, which allow you to move one day in that direction. If +you are on the last day of the week, pressing the arrow will bring you into the +first day of the next week (or vice-versa if you are going backwards). There is +also a button that lists the current day, which you can press to select a day to +view from a calendar dialog. +</para> +<para> +In the main view, there is a collumn of buttons, each of which represents one +hour. If you select one, any new appointments will automatically default to +begining at that time and ending an hour later (which you can, of course, change +when you create the appointment). +</para> +<para> +Clicking on an appointment will open a menu that lets you edit, delete or beam +the appointment. Beam will beam the appointment to any device supporting the +Obex protocol (PalmOS based devices, cellphones, etc). libopieobex must be +installed to use this feature. +</para> +</section> + +<section><title>The Week View</title> +<para> +The week view allows you to see your week divided up into columns, representing +each day of the week, and rows, representing each hour of the day. In the +navigation bar at the top, there are two scroll boxes, the one on the left shows +the current year, and the one to the right shows which week it is of that year. +To the right of both of those is a label which shows the date range for the +currently selected week. +</para> +<para> +In the main view, you see the week divided up into rows and collumns +representing the days of the week, and hours of the day. In each cell, you will +see a blue square which represents an appointment, which you can press to see +details of the appointment. If you press anywhere in the free space, you will go +to the day of the column that you clicked in. +</para> +</section> + +<section><title>The Week List View</title> +<para> +The week list view shows you all the appointments that you have that week +without graphically representing how long they are or showing the free time +between them. This is convinient if you need to see a list of all your +appointments, but do not need to see how your time is mapped out. The navigation +bar has an arrow button on either side, allowing you to move to the next or +previous week, as well as a button which gives the current week number for that +year. Pressing the week number button will bring up a calendar dialog, which +allows you to select the week you are viewing. Selecting a day from the calendar +will bring you to the week that day is in. To the right of that is a button with +a ``2'' in it. When this is depressed, the main view will show two weeks at a +time, instead of one. The last item is a label which shows the range of dates +for the currently selected week. +</para> +<para> +The main view is comprised of several rows, each of which represents a day of +the week. If you have an appointment on that day, the date will be red, +otherwise it will be black (the current day is blue). Clicking on the date +itself will bring you to the day view for that day. Under each day is a list of +all the appointments for that day, as well as their start times. If you click on +an appointment, you will go to an edit dialog for that appointment, which lets +you view its details. Next to each day heading is a ``+'' sign, clicking it will +create a new appointment for that day. +</para> +</section> + +<section><title>The Month View</title> +<para> +The month view looks like a normal monthly calendar, allowing you to see on what +days of the month you have appointments. In the navigation bar, there are two +pairs of arrows. The pair with an arrow and a vertical line will take you to the +first or last month of the currently selected year, while the normal arrow +buttons will take you to the next or previous month. There is a dropdown menu +which allows you to select the month, and a entry field which allows you to +select the year (press the up or down arrows, or enter in your own year). +</para> +<para> +The main view is divided up into a grid, where the columns are the days of the +week, and the rows are the weeks (just like an ordinary calendar). The currently +selected day has a bold box drawn around it, and if the day has an appointment, +there will be a small blue square in the bottom right corner of it (that square +will have a smaller white square if it is a recurring appointment). If the +appointment is an all day event, it will be drawn as a green dot instead. When +you click on the sqaure of a day, you will be taken to the day view for that +day. +</para> +</section> +</section> + +<section><title>Adding Appointments</title> +<para> +To add an appointment, click on the add appointment button in the toolbar at the +top of the window (an image of a blank page), and a dialog will open up, +allowing you to enter information about the appointment (depending on the +current view, and what you may have selected, there may be certain default +settings). +</para> +<para> +At the top of the window is the description field, where you can enter in a +short description of the appointment, or select a common one from the dropdown +list. The location field allows you to do the same. The category dropdown allows +you to assign the appointment to a category, which you can use later to view +only some of your appointments. The button labeled ``...'' to the right of that +will open up a dialog where you can add, delete, or edit certain categories. +</para> +<para> +To enter a start and end time, select the date for each from the dropdown menu, +and then you can either manually enter a time, or you can use the three rows of +numbers to more quickly enter it in. To use the fast input method, first click +in the text entry field of the time you want to edit, then you need to select +the hour. The first two rows are the hours, click whichever one you want. The +third row of numbers are the minutes, in units of five. When you select the +minutes field for the start time, it will automatically set the minutes field +for the end time to the same thing, but you can change this by selecting the end +field and giving it its own minutes field. Because of this, it is fastest to set +the start time first and then the end time. There is also an ``all day'' +checkbox, which will make the appointment take up the entire day. +</para> +<para> +Underneath this you can set the timezone of the appointment from the dropdown +list. To change the available timezones, click the world icon, and it will open +the City Time application. Refer to its documentation for changing the +timezones. If you want to have an alarm go off, check the ``alarm'' checkbox, +and then set the number of minutes before the appointment that you want the +alarm to sound. If you set the dropdown list next to that to ``silent'' you will +only be given a visual alarm, wheras if you set the alarm to ``Loud'', there +will be an alarm sound as well. Note: opie-alarm must be installed for alarms to +work. +</para> +<para> +To set whether the appointment repeats, click the "Repeat" button and a new +dialog will open up. At the top is a row of buttons, which lets you set how +often the appointment repeats. Selecting one of these buttons will change the +interface below, to represent the available options for that type of repetition +(selecting ``None'' will turn off repetition if you turned it on and no longer +want it). When you are done, click ``ok'' in the upper right to select that type +of repetition, or ``x'' to set it back to what it was (none if it is a new +appointment). +</para> +<para> +Finally, you can add notes to the appointment by clicking the ``Notes...'' +button which will open a dialog with a text entry field for adding notes. Press +``ok'' to accept the changes to the notes, ``x'' to cancel. +</para> +<para> +When you are done setting up the appointment, click ``ok'' in the top right of +the window, or ``x'' to cancel adding the appointment. +</para> +</section> +<section><title>Editing Appointments</title> +<para> +How you start editing an appointment varies depending on what view you are in, +but they will all open the same dialog. The dialog is the same as the Add +Appointment dialog, except that the fields will already be filled in with the +information that the appointment contains. Clicking ``ok'' will keep your +changes, ``x'' will revert them to what they were before you edited them. +</para> +</section> + +<section><title>Finding Appointments</title> +<para> +To find a specific appointment, click the find button in the toolbar (small +green magnifying glass) and it will open a find dialog. Here you can enter the +text you want to search for, as well as the category you want to search for, as +well as the start date, and whether you want the search to be case sensitive. +Click ``Find'' to find the next appointment that matches your criteria. +</para> +</section> +</chapter> + +<chapter><title>Todo</title> +<para> +Todo is designed for storing information about things you need to do, but which +arent going to happen at a specific time, like "change the oil" or "mow the +lawn". You can also give todo items a deadline, if they have to be completed by +a certain time. +</para> + +<section><title>Adding Tasks</title> +<para> +Go to Data \begin{math}\rightarrow\end{math}New Task, or click on the new task +icon (blank page). The priority drop down menu lets you select the priority of +the task. The lower the number, the more important it is. The categories behave +in much the same way that they do in Calendar, you can select the category from +the drop down menu, or you can click the ``...'' button to add, delete, or edit +categories. To give the task a due date, check the ``Due'' checkbox, and then +click the button next to it (it should contain the current date). That will open +a calendar from which you can select the due date. The ``Completed'' check box +is the same as the checkbox next to each item in the main view. The ``Summary'' +field is for a short summary that will be visible in the main view, as well as +in the Today application. The down arrow next to it will copy the text in the +``Summary'' field into the large text field below it, which is used for a more +detailed description of the task. Click ``ok'' in the upper right to add the +new task, or ``x'' to close the window without adding the new task. +</para> +</section> +<section><title>Editing Tasks</title> +<para> +To edit a task, you can select it, and then go to +<GUIMenu>Data</GUIMenu><GUIMenuItem>Edit +Task</GUIMenuItem>, or click the edit task icon (an image of a pencil). The same +dialog should apear as if you were adding a task, but the information for that +task should already be filled in. You can change any of it you want to, and then +click ``ok'' in the top right corner to save the changes, or ``x'' to go back to +the way it was. +</para> +</section> + +<section><title>Deleting Tasks</title> +<para> +To delete a task, first select it, and then either select +<GUIMenu>Data</GUIMenu> +<GUIMenuItem>Delete...</GUIMenuItem> or press the Delete icon (an image of +a trash can). A dialog should pop up, asking if you want to delete the task, +click yes to delete it, or no to cancel. +</para> +</section> +<section><title>Finding Tasks</title> +<para> +To find a task, either go to +<GUIMenu>Options</GUIMenu><GUIMenuItem>Find</GUIMenuItem> +, or +click the find icon (an image of a green magnifying glass), and a dialog should +pop up. Enter the text you want to search for in the description, and select the +category that you want it to search through (this will speed the search up, if +you know what category it is in). You can also select ``case sensative'' which +makes the search pay attention to the case of what you type (so if you look for +``mow lawn'', it won't find a task called ``Mow lawn''). ``Search Backwards'' +will search backwards from the currently selected task. Click ``Find'' to +initiate the search, when it finds a task that matches the string, it will +select it. If you click Find again, it will find the next one in the list (or +the previous one, if ``Search backwards'' is selected). +</para> +</section> + +<section><title>Viewing Tasks</title> +<para> +To only view tasks filled under certain categories, go to the Category menu, and +check the categories you want to view. Also, under the Options menu, you can +select whether or not you want completed tasks to be visible, and whether or not +you want to see the deadline. +</para> +</section> + +<section><title>Completing Tasks</title> +<para> +To mark a task as completed without deleting it, you can either check the +checkbox next to it in the main view, or edit it, and check the "completed" +check box in the edit dialog. If <GUIMenu>Options</GUIMenu> +<GUIMenuItem>Completed<GUIMenuItem> tasks is not checked, the task will +disapear when you mark it completed. but do not worry, it is not gone forever, +just check Completed tasks in the options menu, and you can see and edit it +again. +</para> +</section> +</chapter> + +<chapter><title>File Manager</title> +<para> +The file manager allows easy access to your file system, letting you browse, +copy, move, delete and link files. You can also use it to open the file in an +application based upon the file type, or add the file to your ``Documents'' tab, +as well as several other filesystem related things. +<para> + +<section><title>Navigating</title> +<para> +To enter a directory, simply press its icon or name in the main view. There are +also two buttons in the toolbar which help with navigation. The back arrow will +take you back to the directory you were previously looking at, while the up +arrow will take you up one level in the directory structure (so, if you are in +/usr/bin, it will take you to /usr, regardless of where you were before). The +``Dir'' menu shows the current path, with each directory as a menu item. So, if +you are in /opt/QtPalmtop/bin there will be four entries: /, opt, QtPalmtop, and +bin. Selecting one of these will take you immediately to that directory. +</para> +</section> + +<section><title>Selecting Files</title> +<para> +When you click on a file, its selection status is toggled. So the first time you +click on it, it will be selected, and the second time it will be deselected. To +select multiple files, simply click on each one you want to select. +</para> +</section> +<section><title>Moving Files</title> +<para> +To copy a file from one directory to another, press and hold on the filename, +and select ``Copy'' from the menu that pops up. Then, change into the directory +that you want to copy it into, and press the "paste" icon (an image of a +clipboard and a piece of paper). To move a file, do the same thing, except +select ``Cut'' from the first menu, instead of ``Copy''. You can also move or +copy multiple files by selecting all of them and using the cut or copy buttons +in the toolbar. +</para> +</section> + +<section><title>Deleting Files</title> +<para> +To delete a file, press and hold it to bring up its menu, then select +``Delete'', and click ``Yes'' (or ``No'' to cancel). Delete will delete all the +currently selected files, which may be more than the one that you pressed and +held on. +</para> +</section> + +<section><title>Renaming Files</title> +<para> +To change a file's name, first bring up the input method you want to use (unless +you are going to use the hardware keyboard), then press and hold on the +filename, and select ``rename''. A new file will appear with a ``Name'' field +that is editable, enter the new name, and click another file to keep the new +name. +</para> +</section> + +<section><title>Creating Directories</title> +<para> +To create a directory, first bring up the input method you want to use (if you +are using one), and then click the new directory button (an image of a file +folder with a ``+'' sign). A new folder will be created with the name ``New +Folder'', and the folder name will be editable. Enter the name you want and then +click another file to create the folder. +</para> +</section> + +<section><title>Viewing Files</title> +<para> +To view a file, press and hold on a file, and the menu that comes up will +contain two entries for vieing the file, the first depends on the filetype, but +usually lets you open the file in a specific program. The second is ``view as +text'' which will open the file up in TextEdit (regardless of whether or not it +is actually a text file). +</para> +</section> + +<section><title>Adding to ``Documents''</title> +<para> +To add a file to your ``Documents'', press and hold the file, and select ``Add +to documents'' from the menu. This will add the file to the documents tab, which +you can use to quickly open the file (simply click on the icon for the file in +the Documents tab). Some programs also use the Documents list to aid in quickly +opening files. +</para> +</section> + +<section><title>Sorting Files</title> +<para> +To sort the files, use the ``Sort'' menu to select wich field you want to sort +the files by (``by Name'', for instance, will sort the file alphabetically by +name). If ``Ascending'' is checked, the files will be sorted in ascending order, +if it is not, they will be sorted in descending order. You can also press the +name of the column in the main view to sort by that field. +</para> +</section> + +<section><title>Viewing Options</title> +<para> +The ``View'' menu lets you choose which files to view. If ``Hidden'' is checked, +hidden files will be visible (in Linux, hidden files start with a ``.''). If +``Symlinks'' is checked, symbolic links (files or directories which are merely +links to other files or directories) will be visible. +</para> +</section> +</chapter> +</book>
\ No newline at end of file |