| -rw-r--r-- | libopie/odevice.cpp | 49 |
1 files changed, 29 insertions, 20 deletions
diff --git a/libopie/odevice.cpp b/libopie/odevice.cpp index 4b5a54e..4c33a0e 100644 --- a/libopie/odevice.cpp +++ b/libopie/odevice.cpp @@ -750,99 +750,95 @@ bool ODevice::setLedState ( OLed which, OLedState st ) return false; } /** * @return if the device has a light sensor */ bool ODevice::hasLightSensor ( ) const { return false; } /** * @return a value from the light senso */ int ODevice::readLightSensor ( ) { return -1; } /** * @return the light sensor resolution whatever that is ;) */ int ODevice::lightSensorResolution ( ) const { return 0; } /** * @return a list with valid CPU frequency */ QStrList &ODevice::cpuFrequencies ( ) const { -qWarning("ODevice::cpuFrequencies: m_cpu_frequencies is %d", (int) d->m_cpu_frequencies); return *d->m_cpu_frequencies; } /** * Set desired cpu frequency * * @param index index into d->m_cpu_frequencies of the frequency to be set */ bool ODevice::setCpuFrequency(uint index) { if (index >= d->m_cpu_frequencies->count()) return false; char *freq = d->m_cpu_frequencies->at(index); qWarning("set freq to %s", freq); - //TODO: do the change in /proc/sys/cpu/0/speed - - return false; -} + int fd; -/** - * Returns current frequency index out of d->m_cpu_frequencies - */ -uint ODevice::cpuFrequency() const -{ - // TODO: get freq from /proc/sys/cpu/0/speed and return index + if ((fd = ::open("/proc/sys/cpu/0/speed", O_WRONLY)) >= 0) { + char writeCommand[50]; + const int count = sprintf(writeCommand, "%s\n", freq); + int res = (::write(fd, writeCommand, count) != -1); + ::close(fd); + return res; + } - return 0; + return false; } - /** * @return a list of hardware buttons */ const QValueList <ODeviceButton> &ODevice::buttons ( ) { initButtons ( ); return *d-> m_buttons; } /** * @return The amount of time that would count as a hold */ uint ODevice::buttonHoldTime ( ) const { return d-> m_holdtime; } /** * This method return a ODeviceButton for a key code * or 0 if no special hardware button is available for the device * * @return The devicebutton or 0l * @see ODeviceButton */ const ODeviceButton *ODevice::buttonForKeycode ( ushort code ) { initButtons ( ); for ( QValueListConstIterator<ODeviceButton> it = d-> m_buttons-> begin ( ); it != d-> m_buttons-> end ( ); ++it ) { if ( (*it). keycode ( ) == code ) return &(*it); @@ -1963,69 +1959,84 @@ int SIMpad::displayBrightnessResolution ( ) const * * Ramses * **************************************************/ void Ramses::init() { d->m_vendorstr = "M und N"; d->m_vendor = Vendor_MundN; QFile f("/proc/sys/board/ramses"); d->m_modelstr = "Ramses"; d->m_model = Model_Ramses_MNCI; d->m_rotation = Rot0; d->m_holdtime = 1000; f.setName("/etc/oz_version"); if (f.open(IO_ReadOnly)) { d->m_systemstr = "OpenEmbedded/Ramses"; d->m_system = System_OpenZaurus; QTextStream ts(&f); ts.setDevice(&f); d->m_sysverstr = ts.readLine(); f.close(); } m_power_timer = 0; -qWarning("adding freq"); - d->m_cpu_frequencies->append("100"); - d->m_cpu_frequencies->append("200"); - d->m_cpu_frequencies->append("300"); - d->m_cpu_frequencies->append("400"); +#ifdef QT_QWS_ALLOW_OVERCLOCK +#warning *** Overclocking enabled - this may fry your hardware - you have been warned *** +#define OC(x...) x +#else +#define OC(x...) +#endif + + + // This table is true for a Intel XScale PXA 255 + + d->m_cpu_frequencies->append("99000"); // mem= 99, run= 99, turbo= 99, PXbus= 50 +OC( d->m_cpu_frequencies->append("118000"); ) // mem=118, run=118, turbo=118, PXbus= 59 OC'd mem + d->m_cpu_frequencies->append("199100"); // mem= 99, run=199, turbo=199, PXbus= 99 +OC( d->m_cpu_frequencies->append("236000"); ) // mem=118, run=236, turbo=236, PXbus=118 OC'd mem + d->m_cpu_frequencies->append("298600"); // mem= 99, run=199, turbo=298, PXbus= 99 +OC( d->m_cpu_frequencies->append("354000"); ) // mem=118, run=236, turbo=354, PXbus=118 OC'd mem + d->m_cpu_frequencies->append("398099"); // mem= 99, run=199, turbo=398, PXbus= 99 + d->m_cpu_frequencies->append("398100"); // mem= 99, run=398, turbo=398, PXbus=196 +OC( d->m_cpu_frequencies->append("471000"); ) // mem=118, run=471, turbo=471, PXbus=236 OC'd mem/core/bus + } bool Ramses::filter(int /*unicode*/, int keycode, int modifiers, bool isPress, bool autoRepeat) { Q_UNUSED( keycode ); Q_UNUSED( modifiers ); Q_UNUSED( isPress ); Q_UNUSED( autoRepeat ); return false; } void Ramses::timerEvent(QTimerEvent *) { killTimer(m_power_timer); m_power_timer = 0; QWSServer::sendKeyEvent(-1, HardKey_Backlight, 0, true, false); QWSServer::sendKeyEvent(-1, HardKey_Backlight, 0, false, false); } bool Ramses::setSoftSuspend(bool soft) { qDebug("Ramses::setSoftSuspend(%d)", soft); #if 0 bool res = false; int fd; if (((fd = ::open("/dev/apm_bios", O_RDWR)) >= 0) || ((fd = ::open("/dev/misc/apm_bios",O_RDWR)) >= 0)) { int sources = ::ioctl(fd, APM_IOCGEVTSRC, 0); // get current event sources @@ -2115,43 +2126,41 @@ bool Ramses::setDisplayBrightness(int bright) ::close(fd); } return res; } int Ramses::displayBrightnessResolution() const { return 32; } bool Ramses::setDisplayContrast(int contr) { qDebug("Ramses::setDisplayContrast(%d)", contr); bool res = false; int fd; // pwm0 contrast: 20 steps 79..90 (dunkel->hell) if (contr > 255 ) contr = 255; if (contr < 0) contr = 0; contr = 90 - (contr * 20 / 255); if ((fd = ::open("/proc/sys/board/pwm0", O_WRONLY)) >= 0) { qDebug(" %d -> pwm0", contr); char writeCommand[100]; const int count = sprintf(writeCommand, "%d\n", contr); res = (::write(fd, writeCommand, count) != -1); res = true; ::close(fd); - } else { - qWarning("no write"); } return res; } int Ramses::displayContrastResolution() const { return 20; } |