| -rw-r--r-- | libopie/odevice.cpp | 90 |
1 files changed, 78 insertions, 12 deletions
diff --git a/libopie/odevice.cpp b/libopie/odevice.cpp index e24e043..bc09e92 100644 --- a/libopie/odevice.cpp +++ b/libopie/odevice.cpp @@ -111,64 +111,67 @@ protected: class Jornada : public ODevice { protected: virtual void init ( ); //virtual void initButtons ( ); public: virtual bool setSoftSuspend ( bool soft ); virtual bool setDisplayBrightness ( int b ); virtual int displayBrightnessResolution ( ) const; static bool isJornada(); }; class Zaurus : public ODevice { protected: virtual void init ( ); virtual void initButtons ( ); public: virtual bool setSoftSuspend ( bool soft ); virtual bool setDisplayBrightness ( int b ); virtual int displayBrightnessResolution ( ) const; virtual void alarmSound ( ); virtual void keySound ( ); virtual void touchSound ( ); virtual QValueList <OLed> ledList ( ) const; virtual QValueList <OLedState> ledStateList ( OLed led ) const; virtual OLedState ledState ( OLed led ) const; virtual bool setLedState ( OLed led, OLedState st ); + virtual bool hasHingeSensor() const; + virtual OHingeStatus readHingeSensor(); + static bool isZaurus(); // Does this break BC? virtual bool suspend ( ); virtual Transformation rotation ( ) const; virtual ODirection direction ( ) const; protected: virtual void buzzer ( int snd ); OLedState m_leds [1]; bool m_embedix; }; class SIMpad : public ODevice, public QWSServer::KeyboardFilter { protected: virtual void init ( ); virtual void initButtons ( ); public: virtual bool setSoftSuspend ( bool soft ); virtual bool suspend(); virtual bool setDisplayStatus( bool on ); virtual bool setDisplayBrightness ( int b ); virtual int displayBrightnessResolution ( ) const; virtual void alarmSound ( ); virtual QValueList <OLed> ledList ( ) const; virtual QValueList <OLedState> ledStateList ( OLed led ) const; virtual OLedState ledState ( OLed led ) const; @@ -794,80 +797,96 @@ QValueList <OLedState> ODevice::ledStateList ( OLed /*which*/ ) const } /** * @return the state for a given OLed */ OLedState ODevice::ledState ( OLed /*which*/ ) const { return Led_Off; } /** * Set the state for a LED * @param which Which OLed to use * @param st The state to set * @return success or failure */ bool ODevice::setLedState ( OLed which, OLedState st ) { Q_UNUSED( which ) Q_UNUSED( st ) return false; } /** * @return if the device has a light sensor */ bool ODevice::hasLightSensor ( ) const { return false; } /** - * @return a value from the light senso + * @return a value from the light sensor */ int ODevice::readLightSensor ( ) { return -1; } /** - * @return the light sensor resolution whatever that is ;) + * @return the light sensor resolution */ int ODevice::lightSensorResolution ( ) const { return 0; } /** + * @return if the device has a hinge sensor + */ +bool ODevice::hasHingeSensor ( ) const +{ + return false; +} + +/** + * @return a value from the hinge sensor + */ +OHingeStatus ODevice::readHingeSensor ( ) +{ + return CASE_UNKNOWN; +} + +/** * @return a list with CPU frequencies supported by the hardware */ const QStrList &ODevice::allowedCpuFrequencies ( ) const { return *d->m_cpu_frequencies; } /** * Set desired CPU frequency * * @param index index into d->m_cpu_frequencies of the frequency to be set */ bool ODevice::setCurrentCpuFrequency(uint index) { if (index >= d->m_cpu_frequencies->count()) return false; char *freq = d->m_cpu_frequencies->at(index); qWarning("set freq to %s", freq); int fd; if ((fd = ::open("/proc/sys/cpu/0/speed", O_WRONLY)) >= 0) { char writeCommand[50]; const int count = sprintf(writeCommand, "%s\n", freq); int res = (::write(fd, writeCommand, count) != -1); ::close(fd); return res; } return false; @@ -1916,84 +1935,100 @@ bool Zaurus::setSoftSuspend ( bool soft ) int fd; if ((( fd = ::open ( "/dev/apm_bios", O_RDWR )) >= 0 ) || (( fd = ::open ( "/dev/misc/apm_bios",O_RDWR )) >= 0 )) { int sources = ::ioctl ( fd, APM_IOCGEVTSRC, 0 ); // get current event sources if ( sources >= 0 ) { if ( soft ) sources &= ~APM_EVT_POWER_BUTTON; else sources |= APM_EVT_POWER_BUTTON; if ( ::ioctl ( fd, APM_IOCSEVTSRC, sources ) >= 0 ) // set new event sources res = true; else perror ( "APM_IOCGEVTSRC" ); } else perror ( "APM_IOCGEVTSRC" ); ::close ( fd ); } else perror ( "/dev/apm_bios or /dev/misc/apm_bios" ); return res; } bool Zaurus::setDisplayBrightness ( int bright ) { -// FIXME The C7x0 have a proc-interface (/proc/drivers/corgi-bl) which -// is nice to use. Currently it exposes 16+1 levels. Implement this! -// (or wait for kergoth unifying the interfaces in the OpenZaurus kernel.) bool res = false; int fd; - if ( bright > 255 ) - bright = 255; - if ( bright < 0 ) - bright = 0; + if ( bright > 255 ) bright = 255; + if ( bright < 0 ) bright = 0; - if (m_embedix) { + if ( m_embedix ) + { + if ( d->m_model == Model_Zaurus_SLC7x0 ) + { + // special treatment for devices with the corgi backlight interface + if (( fd = ::open ( "/proc/driver/fl/corgi-bl", O_WRONLY )) >= 0 ) + { + if ( bright > 0x11 ) bright = 0x11; + char writeCommand[100]; + const int count = sprintf( writeCommand, "0x%x\n", bright ); + res = ( ::write ( fd, writeCommand, count ) != -1 ); + ::close ( fd ); + } + return res; + } + else + { + // standard treatment for devices with the dumb embedix frontlight interface if (( fd = ::open ( "/dev/fl", O_WRONLY )) >= 0 ) { int bl = ( bright * 4 + 127 ) / 255; // only 4 steps on zaurus if ( bright && !bl ) bl = 1; res = ( ::ioctl ( fd, FL_IOCTL_STEP_CONTRAST, bl ) == 0 ); ::close ( fd ); } - } else { + } + } + else + { + // special treatment for the OpenZaurus unified interface #define FB_BACKLIGHT_SET_BRIGHTNESS _IOW('F', 1, u_int) /* set brightness */ if (( fd = ::open ( "/dev/fb0", O_WRONLY )) >= 0 ) { res = ( ::ioctl ( fd , FB_BACKLIGHT_SET_BRIGHTNESS, bright ) == 0 ); ::close ( fd ); } } return res; } bool Zaurus::suspend ( ) { qDebug("ODevice::suspend"); if ( !isQWS( ) ) // only qwsserver is allowed to suspend return false; if ( d-> m_model == Model_Unknown ) // better don't suspend in qvfb / on unkown devices return false; bool res = false; struct timeval tvs, tvn; ::gettimeofday ( &tvs, 0 ); ::sync ( ); // flush fs caches res = ( ::system ( "apm --suspend" ) == 0 ); // This is needed because the iPAQ apm implementation is asynchronous and we // can not be sure when exactly the device is really suspended // This can be deleted as soon as a stable familiar with a synchronous apm implementation exists. if ( res ) { do { // Yes, wait 15 seconds. This APM bug sucks big time. @@ -2044,69 +2079,100 @@ ODirection Zaurus::direction ( ) const ODirection dir; int handle = 0; int retval = 0; switch ( d-> m_model ) { case Model_Zaurus_SLC7x0: handle = ::open("/dev/apm_bios", O_RDWR|O_NONBLOCK); if (handle == -1) { dir = CW; } else { retval = ::ioctl(handle, SHARP_IOCTL_GET_ROTATION); ::close (handle); if (retval == 2 ) dir = CCW; else dir = CW; } break; case Model_Zaurus_SLA300: case Model_Zaurus_SLB600: case Model_Zaurus_SL5500: case Model_Zaurus_SL5000: default: dir = d-> m_direction; break; } return dir; } int Zaurus::displayBrightnessResolution ( ) const { if (m_embedix) - return 5; + return d->m_model == Model_Zaurus_SLC7x0 ? 18 : 5; else return 256; } +bool Zaurus::hasHingeSensor() const +{ + return d->m_model == Model_Zaurus_SLC7x0; +} + +OHingeStatus Zaurus::readHingeSensor() +{ + int handle = ::open("/dev/apm_bios", O_RDWR|O_NONBLOCK); + if (handle == -1) + { + qWarning("Zaurus::readHingeSensor() - failed (%s)", "unknown reason" ); //FIXME: use strerror + return CASE_UNKNOWN; + } + else + { + int retval = ::ioctl(handle, SHARP_IOCTL_GET_ROTATION); + ::close (handle); + if ( retval == CASE_CLOSED || retval == CASE_PORTRAIT || retval == CASE_LANDSCAPE ) + { + qDebug( "Zaurus::readHingeSensor() - result = %d", retval ); + return static_cast<OHingeStatus>( retval ); + } + else + { + qWarning("Zaurus::readHingeSensor() - couldn't compute hinge status!" ); + return CASE_UNKNOWN; + } + } +} + + /************************************************** * * SIMpad * **************************************************/ void SIMpad::init ( ) { d-> m_vendorstr = "SIEMENS"; d-> m_vendor = Vendor_SIEMENS; QFile f ( "/proc/hal/model" ); //TODO Implement model checking //FIXME For now we assume an SL4 d-> m_modelstr = "SL4"; d-> m_model = Model_SIMpad_SL4; switch ( d-> m_model ) { default: d-> m_rotation = Rot0; d-> m_direction = CCW; d-> m_holdtime = 1000; // 1000ms break; } f. setName ( "/etc/familiar-version" ); if ( f. open ( IO_ReadOnly )) { d-> m_systemstr = "Familiar"; d-> m_system = System_Familiar; |