1 files changed, 7 insertions, 2 deletions

diff --git a/libopie/odevice.cpp b/libopie/odevice.cpp
index 9e97c56..d5e3c5c 100644
--- a/libopie/odevice.cpp
+++ b/libopie/odevice.cpp
@@ -187,193 +187,192 @@ struct z_button {
     { Qt::Key_F10, QT_TRANSLATE_NOOP("Button", "Contacts Button"),
 	"devicebuttons/z_contact",
 	"addressbook", "raise()",
 	"addressbook", "beamBusinessCard()" },
     { Qt::Key_F12, QT_TRANSLATE_NOOP("Button", "Home Button"),
 	"devicebuttons/z_home",
 	"QPE/Launcher", "home()",
 	"buttonsettings", "raise()" },
     { Qt::Key_F11, QT_TRANSLATE_NOOP("Button", "Menu Button"),
 	"devicebuttons/z_menu",
  	"QPE/TaskBar", "toggleMenu()",
 	"QPE/TaskBar", "toggleStartMenu()" },
     { Qt::Key_F13, QT_TRANSLATE_NOOP("Button", "Mail Button"),
 	"devicebuttons/z_mail",
 	"mail", "raise()",
 	"mail", "newMail()" },
 };
 
 static QCString makeChannel ( const char *str )
 {
 	if ( str && !::strchr ( str, '/' ))
 		return QCString ( "QPE/Application/" ) + str;
 	else
 		return str;
 }
 
 
 
 
 ODevice *ODevice::inst ( )
 {
 	static ODevice *dev = 0;
 	
 	if ( !dev ) {
 		if ( QFile::exists ( "/proc/hal/model" ))
 			dev = new iPAQ ( );
 		else if ( QFile::exists ( "/dev/sharp_buz" ) || QFile::exists ( "/dev/sharp_led" ))
 			dev = new Zaurus ( );
 		else
 			dev = new ODevice ( );
 			
 		dev-> init ( );
 	}
 	return dev;
 }
 
 
 /**************************************************
  *
  * common
  *
  **************************************************/
 
 
 ODevice::ODevice ( )
 {
 	d = new ODeviceData;
 
 	d-> m_qwsserver = qApp ? ( qApp-> type ( ) == QApplication::GuiServer ) : false;
 
 	d-> m_modelstr = "Unknown";
 	d-> m_model = Model_Unknown;
 	d-> m_vendorstr = "Unknown";
 	d-> m_vendor = Vendor_Unknown;
 	d-> m_systemstr = "Unknown";
 	d-> m_system = System_Unknown;
 	d-> m_sysverstr = "0.0";
 	d-> m_rotation = Rot0;
 	
 	d-> m_holdtime = 1000; // 1000ms
 	
 	QCopChannel *sysch = new QCopChannel ( "QPE/System", this );
 	connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), this, SLOT( systemMessage ( const QCString &, const QByteArray & )));	                     	
 }
 
 void ODevice::systemMessage ( const QCString &msg, const QByteArray & )
 {
 	if ( msg == "deviceButtonMappingChanged()" ) {
 		reloadButtonMapping ( );
 	} 
 }
 
 void ODevice::init ( )
 {
 	// Simulation uses iPAQ 3660 device buttons
 
 	for ( uint i = 0; i < ( sizeof( ipaq_buttons ) / sizeof( i_button )); i++ ) {
 		i_button *ib = ipaq_buttons + i;	
 		ODeviceButton b;
 		
 		if (( ib-> model & Model_iPAQ_H36xx ) == Model_iPAQ_H36xx ) {		
 			b. setKeycode ( ib-> code );
 			b. setUserText ( qApp-> translate ( "Button", ib-> utext ));
 			b. setPixmap ( Resource::loadPixmap ( ib-> pix ));
 			b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( ib-> fpressedservice ), ib-> fpressedaction ));
 			b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( ib-> fheldservice ), ib-> fheldaction ));
-                                        
 			d-> m_buttons. append ( b );
 		}
 	}
 	reloadButtonMapping ( );
 }
 
 ODevice::~ODevice ( )
 {
 	delete d;
 }
 
 bool ODevice::setSoftSuspend ( bool /*soft*/ )
 {
 	return false;
 }
 
 //#include <linux/apm_bios.h>
 
 #define APM_IOC_SUSPEND          OD_IO( 'A', 2 )
 
 
 bool ODevice::suspend ( )
 {
 	if ( !d-> m_qwsserver ) // only qwsserver is allowed to suspend
 		return false;
 
 	if ( d-> m_model == Model_Unknown ) // better don't suspend in qvfb / on unkown devices
 		return false;
 
 	bool res = false;
 	
 	struct timeval tvs, tvn;
 	::gettimeofday ( &tvs, 0 );
 	
 	::sync ( ); // flush fs caches
 	res = ( ::system ( "apm --suspend" ) == 0 );
 
 	// This is needed because the iPAQ apm implementation is asynchronous and we
 	// can not be sure when exactly the device is really suspended
 	// This can be deleted as soon as a stable familiar with a synchronous apm implementation exists.
 
 	if ( res ) {	
 		do { // wait at most 1.5 sec: either suspend didn't work or the device resumed
 			::usleep ( 200 * 1000 );
 			::gettimeofday ( &tvn, 0 );				
 		} while ((( tvn. tv_sec - tvs. tv_sec ) * 1000 + ( tvn. tv_usec - tvs. tv_usec ) / 1000 ) < 1500 );
 	}
 	
 	return res;
 }
 
 //#include <linux/fb.h> better not rely on kernel headers in userspace ...
 
 #define FBIOBLANK             OD_IO( 'F', 0x11 ) // 0x4611
 
 /* VESA Blanking Levels */
 #define VESA_NO_BLANKING      0
 #define VESA_VSYNC_SUSPEND    1
 #define VESA_HSYNC_SUSPEND    2
 #define VESA_POWERDOWN        3
 
 
 bool ODevice::setDisplayStatus ( bool on )
 {
 	if ( d-> m_model == Model_Unknown )
 		return false;
 
 	bool res = false;
 	int fd;
 	
 	if (( fd = ::open ( "/dev/fb0", O_RDWR )) >= 0 ) {
 		res = ( ::ioctl ( fd, FBIOBLANK, on ? VESA_NO_BLANKING : VESA_POWERDOWN ) == 0 );
 		::close ( fd );
 	}	                                                                                       
 	return res;
 }
 
 bool ODevice::setDisplayBrightness ( int )
 {
 	return false;
 }
 
 int ODevice::displayBrightnessResolution ( ) const
 {
 	return 16;
 }
 
 QString ODevice::vendorString ( ) const
 {
 	return d-> m_vendorstr;
 }
 
 OVendor ODevice::vendor ( ) const
 {
 	return d-> m_vendor;
 }
@@ -425,207 +424,213 @@ void ODevice::keySound ( )
 
 	if ( snd. isFinished ( ))
 		snd. play ( );
 #endif
 }
 
 void ODevice::touchSound ( )
 {
 
 #ifndef QT_NO_SOUND
 	static Sound snd ( "touchsound" );
 
 	if ( snd. isFinished ( ))
 		snd. play ( );
 #endif
 }
 
 
 QValueList <OLed> ODevice::ledList ( ) const
 {
 	return QValueList <OLed> ( );
 }
 
 QValueList <OLedState> ODevice::ledStateList ( OLed /*which*/ ) const
 {
 	return QValueList <OLedState> ( );
 }
 
 OLedState ODevice::ledState ( OLed /*which*/ ) const
 {
 	return Led_Off;
 }
 
 bool ODevice::setLedState ( OLed /*which*/, OLedState /*st*/ )
 {
 	return false;
 }
 
 bool ODevice::hasLightSensor ( ) const
 {
 	return false;
 }
 
 int ODevice::readLightSensor ( )
 {
 	return -1;
 }
 
 int ODevice::lightSensorResolution ( ) const
 {
 	return 0;
 }
 
 const QValueList <ODeviceButton> &ODevice::buttons ( ) const
 {
 	return d-> m_buttons;
 }
 
 uint ODevice::buttonHoldTime ( ) const
 {
 	return d-> m_holdtime;
 }
 
 const ODeviceButton *ODevice::buttonForKeycode ( ushort code )
 {
 	for ( QValueListConstIterator<ODeviceButton> it = d-> m_buttons. begin ( ); it != d-> m_buttons. end ( ); ++it ) {
 		if ( (*it). keycode ( ) == code )
 			return &(*it);
 	}
 	return 0;
 }
 
 void ODevice::reloadButtonMapping ( )
 {
 	Config cfg ( "ButtonSettings" );
 	
 	for ( uint i = 0; i < d-> m_buttons. count ( ); i++ ) {
 		ODeviceButton &b = d-> m_buttons [i];
 		QString group = "Button" + QString::number ( i );
 
 		QCString pch, hch;
 		QCString pm, hm;
 		QByteArray pdata, hdata;
 		
 		if ( cfg. hasGroup ( group )) {
 			cfg. setGroup ( group );
 			pch = cfg. readEntry ( "PressedActionChannel" ). latin1 ( );
 			pm  = cfg. readEntry ( "PressedActionMessage" ). latin1 ( );
 			// pdata = decodeBase64 ( buttonFile. readEntry ( "PressedActionArgs" ));
 
 			hch = cfg. readEntry ( "HeldActionChannel" ). latin1 ( );
 			hm  = cfg. readEntry ( "HeldActionMessage" ). latin1 ( );
 			// hdata = decodeBase64 ( buttonFile. readEntry ( "HeldActionArgs" ));
 		}
 		
 		b. setPressedAction ( OQCopMessage ( pch, pm, pdata ));
+		
 		b. setHeldAction ( OQCopMessage ( hch, hm, hdata ));
 	}
 }
 
 void ODevice::remapPressedAction ( int button, const OQCopMessage &action )
 {
+	QString mb_chan;
+	
 	if ( button >= (int) d-> m_buttons. count ( ))
 		return;
 		
+		
 	ODeviceButton &b = d-> m_buttons [button];
     b. setPressedAction ( action );
 
+	mb_chan=b. pressedAction ( ). channel ( );
+
 	Config buttonFile ( "ButtonSettings" );
 	buttonFile. setGroup ( "Button" + QString::number ( button ));
-	buttonFile. writeEntry ( "PressedActionChannel", (const char*) b. pressedAction ( ). channel ( ));
+	buttonFile. writeEntry ( "PressedActionChannel", (const char*) mb_chan);
 	buttonFile. writeEntry ( "PressedActionMessage", (const char*) b. pressedAction ( ). message ( ));
 
 //	buttonFile. writeEntry ( "PressedActionArgs", encodeBase64 ( b. pressedAction ( ). data ( )));
 
 	QCopEnvelope ( "QPE/System", "deviceButtonMappingChanged()" );
 }
 
 void ODevice::remapHeldAction ( int button, const OQCopMessage &action )
 {
 	if ( button >= (int) d-> m_buttons. count ( ))
 		return;
 		
 	ODeviceButton &b = d-> m_buttons [button];
     b. setHeldAction ( action );
 
 	Config buttonFile ( "ButtonSettings" );
 	buttonFile. setGroup ( "Button" + QString::number ( button ));
 	buttonFile. writeEntry ( "HeldActionChannel", (const char *) b. heldAction ( ). channel ( ));
 	buttonFile. writeEntry ( "HeldActionMessage", (const char *) b. heldAction ( ). message ( ));
 
 //	buttonFile. writeEntry ( "HeldActionArgs", decodeBase64 ( b. heldAction ( ). data ( )));
 
 	QCopEnvelope ( "QPE/System", "deviceButtonMappingChanged()" );
 }
 
 
 
 
 /**************************************************
  *
  * iPAQ
  *
  **************************************************/
 
 void iPAQ::init ( )
 {
 	d-> m_vendorstr = "HP";
 	d-> m_vendor = Vendor_HP;
 
 	QFile f ( "/proc/hal/model" );
 
 	if ( f. open ( IO_ReadOnly )) {
 		QTextStream ts ( &f );
 
 		d-> m_modelstr = "H" + ts. readLine ( );
 
 		if ( d-> m_modelstr == "H3100" )
 			d-> m_model = Model_iPAQ_H31xx;
 		else if ( d-> m_modelstr == "H3600" )
 			d-> m_model = Model_iPAQ_H36xx;
 		else if ( d-> m_modelstr == "H3700" )
 			d-> m_model = Model_iPAQ_H37xx;
 		else if ( d-> m_modelstr == "H3800" )
 			d-> m_model = Model_iPAQ_H38xx;
 		else if ( d-> m_modelstr == "H3900" )
 			d-> m_model = Model_iPAQ_H39xx;
 		else
 			d-> m_model = Model_Unknown;
 
 		f. close ( );
 	}
 
 	switch ( d-> m_model ) {
 		case Model_iPAQ_H31xx:
 		case Model_iPAQ_H38xx:
 			d-> m_rotation = Rot90;
 			break;
 		case Model_iPAQ_H36xx:
 		case Model_iPAQ_H37xx:
 		case Model_iPAQ_H39xx:
 		default:
 			d-> m_rotation = Rot270;
 			break;
 	}
 
 	f. setName ( "/etc/familiar-version" );
 	if ( f. open ( IO_ReadOnly )) { 
 		d-> m_systemstr = "Familiar";
 		d-> m_system = System_Familiar;
 		
 		QTextStream ts ( &f );
 		d-> m_sysverstr = ts. readLine ( ). mid ( 10 );
 		
 		f. close ( );
 	}
 
 	m_leds [0] = m_leds [1] = Led_Off;
 	
 	m_power_timer = 0;
 	
 	for ( uint i = 0; i < ( sizeof( ipaq_buttons ) / sizeof( i_button )); i++ ) {
 		i_button *ib = ipaq_buttons + i;	
 		ODeviceButton b;
 		
 		if (( ib-> model & d-> m_model ) == d-> m_model ) {		
 			b. setKeycode ( ib-> code );