summaryrefslogtreecommitdiff
path: root/libopie2/opienet/wireless.16.h
Side-by-side diff
Diffstat (limited to 'libopie2/opienet/wireless.16.h') (more/less context) (ignore whitespace changes)
-rw-r--r--libopie2/opienet/wireless.16.h740
1 files changed, 740 insertions, 0 deletions
diff --git a/libopie2/opienet/wireless.16.h b/libopie2/opienet/wireless.16.h
new file mode 100644
index 0000000..9a9accd
--- a/dev/null
+++ b/libopie2/opienet/wireless.16.h
@@ -0,0 +1,740 @@
+/*
+ * This file define a set of standard wireless extensions
+ *
+ * Version : 16 2.4.03
+ *
+ * Authors : Jean Tourrilhes - HPL - <jt@hpl.hp.com>
+ * Copyright (c) 1997-2002 Jean Tourrilhes, All Rights Reserved.
+ */
+
+#ifndef _LINUX_WIRELESS_H
+#define _LINUX_WIRELESS_H
+
+/************************** DOCUMENTATION **************************/
+/*
+ * Initial APIs (1996 -> onward) :
+ * -----------------------------
+ * Basically, the wireless extensions are for now a set of standard ioctl
+ * call + /proc/net/wireless
+ *
+ * The entry /proc/net/wireless give statistics and information on the
+ * driver.
+ * This is better than having each driver having its entry because
+ * its centralised and we may remove the driver module safely.
+ *
+ * Ioctl are used to configure the driver and issue commands. This is
+ * better than command line options of insmod because we may want to
+ * change dynamically (while the driver is running) some parameters.
+ *
+ * The ioctl mechanimsm are copied from standard devices ioctl.
+ * We have the list of command plus a structure descibing the
+ * data exchanged...
+ * Note that to add these ioctl, I was obliged to modify :
+ * # net/core/dev.c (two place + add include)
+ * # net/ipv4/af_inet.c (one place + add include)
+ *
+ * /proc/net/wireless is a copy of /proc/net/dev.
+ * We have a structure for data passed from the driver to /proc/net/wireless
+ * Too add this, I've modified :
+ * # net/core/dev.c (two other places)
+ * # include/linux/netdevice.h (one place)
+ * # include/linux/proc_fs.h (one place)
+ *
+ * New driver API (2002 -> onward) :
+ * -------------------------------
+ * This file is only concerned with the user space API and common definitions.
+ * The new driver API is defined and documented in :
+ * # include/net/iw_handler.h
+ *
+ * Note as well that /proc/net/wireless implementation has now moved in :
+ * # include/linux/wireless.c
+ *
+ * Wireless Events (2002 -> onward) :
+ * --------------------------------
+ * Events are defined at the end of this file, and implemented in :
+ * # include/linux/wireless.c
+ *
+ * Other comments :
+ * --------------
+ * Do not add here things that are redundant with other mechanisms
+ * (drivers init, ifconfig, /proc/net/dev, ...) and with are not
+ * wireless specific.
+ *
+ * These wireless extensions are not magic : each driver has to provide
+ * support for them...
+ *
+ * IMPORTANT NOTE : As everything in the kernel, this is very much a
+ * work in progress. Contact me if you have ideas of improvements...
+ */
+
+/***************************** INCLUDES *****************************/
+
+/* To minimise problems in user space, I might remove those headers
+ * at some point. Jean II */
+#include <sys/types.h>
+#include <net/if.h>
+#include <linux/types.h>
+
+#ifndef IFNAMSIZ
+#define IFNAMSIZ 16
+#endif
+#ifndef IW_MAX_PRIV_DEF
+#define IW_MAX_PRIV_DEF 128
+#endif
+
+/***************************** VERSION *****************************/
+/*
+ * This constant is used to know the availability of the wireless
+ * extensions and to know which version of wireless extensions it is
+ * (there is some stuff that will be added in the future...)
+ * I just plan to increment with each new version.
+ */
+#define WIRELESS_EXT 16
+
+/*
+ * Changes :
+ *
+ * V2 to V3
+ * --------
+ * Alan Cox start some incompatibles changes. I've integrated a bit more.
+ * - Encryption renamed to Encode to avoid US regulation problems
+ * - Frequency changed from float to struct to avoid problems on old 386
+ *
+ * V3 to V4
+ * --------
+ * - Add sensitivity
+ *
+ * V4 to V5
+ * --------
+ * - Missing encoding definitions in range
+ * - Access points stuff
+ *
+ * V5 to V6
+ * --------
+ * - 802.11 support (ESSID ioctls)
+ *
+ * V6 to V7
+ * --------
+ * - define IW_ESSID_MAX_SIZE and IW_MAX_AP
+ *
+ * V7 to V8
+ * --------
+ * - Changed my e-mail address
+ * - More 802.11 support (nickname, rate, rts, frag)
+ * - List index in frequencies
+ *
+ * V8 to V9
+ * --------
+ * - Support for 'mode of operation' (ad-hoc, managed...)
+ * - Support for unicast and multicast power saving
+ * - Change encoding to support larger tokens (>64 bits)
+ * - Updated iw_params (disable, flags) and use it for NWID
+ * - Extracted iw_point from iwreq for clarity
+ *
+ * V9 to V10
+ * ---------
+ * - Add PM capability to range structure
+ * - Add PM modifier : MAX/MIN/RELATIVE
+ * - Add encoding option : IW_ENCODE_NOKEY
+ * - Add TxPower ioctls (work like TxRate)
+ *
+ * V10 to V11
+ * ----------
+ * - Add WE version in range (help backward/forward compatibility)
+ * - Add retry ioctls (work like PM)
+ *
+ * V11 to V12
+ * ----------
+ * - Add SIOCSIWSTATS to get /proc/net/wireless programatically
+ * - Add DEV PRIVATE IOCTL to avoid collisions in SIOCDEVPRIVATE space
+ * - Add new statistics (frag, retry, beacon)
+ * - Add average quality (for user space calibration)
+ *
+ * V12 to V13
+ * ----------
+ * - Document creation of new driver API.
+ * - Extract union iwreq_data from struct iwreq (for new driver API).
+ * - Rename SIOCSIWNAME as SIOCSIWCOMMIT
+ *
+ * V13 to V14
+ * ----------
+ * - Wireless Events support : define struct iw_event
+ * - Define additional specific event numbers
+ * - Add "addr" and "param" fields in union iwreq_data
+ * - AP scanning stuff (SIOCSIWSCAN and friends)
+ *
+ * V14 to V15
+ * ----------
+ * - Add IW_PRIV_TYPE_ADDR for struct sockaddr private arg
+ * - Make struct iw_freq signed (both m & e), add explicit padding
+ * - Add IWEVCUSTOM for driver specific event/scanning token
+ * - Add IW_MAX_GET_SPY for driver returning a lot of addresses
+ * - Add IW_TXPOW_RANGE for range of Tx Powers
+ * - Add IWEVREGISTERED & IWEVEXPIRED events for Access Points
+ * - Add IW_MODE_MONITOR for passive monitor
+ *
+ * V15 to V16
+ * ----------
+ * - Increase the number of bitrates in iw_range to 32 (for 802.11g)
+ * - Increase the number of frequencies in iw_range to 32 (for 802.11b+a)
+ * - Reshuffle struct iw_range for increases, add filler
+ * - Increase IW_MAX_AP to 64 for driver returning a lot of addresses
+ * - Remove IW_MAX_GET_SPY because conflict with enhanced spy support
+ * - Add SIOCSIWTHRSPY/SIOCGIWTHRSPY and "struct iw_thrspy"
+ * - Add IW_ENCODE_TEMP and iw_range->encoding_login_index
+ */
+
+/**************************** CONSTANTS ****************************/
+
+/* -------------------------- IOCTL LIST -------------------------- */
+
+/* Wireless Identification */
+#define SIOCSIWCOMMIT 0x8B00 /* Commit pending changes to driver */
+#define SIOCGIWNAME 0x8B01 /* get name == wireless protocol */
+/* SIOCGIWNAME is used to verify the presence of Wireless Extensions.
+ * Common values : "IEEE 802.11-DS", "IEEE 802.11-FH", "IEEE 802.11b"...
+ * Don't put the name of your driver there, it's useless. */
+
+/* Basic operations */
+#define SIOCSIWNWID 0x8B02 /* set network id (pre-802.11) */
+#define SIOCGIWNWID 0x8B03 /* get network id (the cell) */
+#define SIOCSIWFREQ 0x8B04 /* set channel/frequency (Hz) */
+#define SIOCGIWFREQ 0x8B05 /* get channel/frequency (Hz) */
+#define SIOCSIWMODE 0x8B06 /* set operation mode */
+#define SIOCGIWMODE 0x8B07 /* get operation mode */
+#define SIOCSIWSENS 0x8B08 /* set sensitivity (dBm) */
+#define SIOCGIWSENS 0x8B09 /* get sensitivity (dBm) */
+
+/* Informative stuff */
+#define SIOCSIWRANGE 0x8B0A /* Unused */
+#define SIOCGIWRANGE 0x8B0B /* Get range of parameters */
+#define SIOCSIWPRIV 0x8B0C /* Unused */
+#define SIOCGIWPRIV 0x8B0D /* get private ioctl interface info */
+#define SIOCSIWSTATS 0x8B0E /* Unused */
+#define SIOCGIWSTATS 0x8B0F /* Get /proc/net/wireless stats */
+/* SIOCGIWSTATS is strictly used between user space and the kernel, and
+ * is never passed to the driver (i.e. the driver will never see it). */
+
+/* Spy support (statistics per MAC address - used for Mobile IP support) */
+#define SIOCSIWSPY 0x8B10 /* set spy addresses */
+#define SIOCGIWSPY 0x8B11 /* get spy info (quality of link) */
+#define SIOCSIWTHRSPY 0x8B12 /* set spy threshold (spy event) */
+#define SIOCGIWTHRSPY 0x8B13 /* get spy threshold */
+
+/* Access Point manipulation */
+#define SIOCSIWAP 0x8B14 /* set access point MAC addresses */
+#define SIOCGIWAP 0x8B15 /* get access point MAC addresses */
+#define SIOCGIWAPLIST 0x8B17 /* Deprecated in favor of scanning */
+#define SIOCSIWSCAN 0x8B18 /* trigger scanning (list cells) */
+#define SIOCGIWSCAN 0x8B19 /* get scanning results */
+
+/* 802.11 specific support */
+#define SIOCSIWESSID 0x8B1A /* set ESSID (network name) */
+#define SIOCGIWESSID 0x8B1B /* get ESSID */
+#define SIOCSIWNICKN 0x8B1C /* set node name/nickname */
+#define SIOCGIWNICKN 0x8B1D /* get node name/nickname */
+/* As the ESSID and NICKN are strings up to 32 bytes long, it doesn't fit
+ * within the 'iwreq' structure, so we need to use the 'data' member to
+ * point to a string in user space, like it is done for RANGE... */
+
+/* Other parameters useful in 802.11 and some other devices */
+#define SIOCSIWRATE 0x8B20 /* set default bit rate (bps) */
+#define SIOCGIWRATE 0x8B21 /* get default bit rate (bps) */
+#define SIOCSIWRTS 0x8B22 /* set RTS/CTS threshold (bytes) */
+#define SIOCGIWRTS 0x8B23 /* get RTS/CTS threshold (bytes) */
+#define SIOCSIWFRAG 0x8B24 /* set fragmentation thr (bytes) */
+#define SIOCGIWFRAG 0x8B25 /* get fragmentation thr (bytes) */
+#define SIOCSIWTXPOW 0x8B26 /* set transmit power (dBm) */
+#define SIOCGIWTXPOW 0x8B27 /* get transmit power (dBm) */
+#define SIOCSIWRETRY 0x8B28 /* set retry limits and lifetime */
+#define SIOCGIWRETRY 0x8B29 /* get retry limits and lifetime */
+
+/* Encoding stuff (scrambling, hardware security, WEP...) */
+#define SIOCSIWENCODE 0x8B2A /* set encoding token & mode */
+#define SIOCGIWENCODE 0x8B2B /* get encoding token & mode */
+/* Power saving stuff (power management, unicast and multicast) */
+#define SIOCSIWPOWER 0x8B2C /* set Power Management settings */
+#define SIOCGIWPOWER 0x8B2D /* get Power Management settings */
+
+/* -------------------- DEV PRIVATE IOCTL LIST -------------------- */
+
+/* These 16 ioctl are wireless device private.
+ * Each driver is free to use them for whatever purpose it chooses,
+ * however the driver *must* export the description of those ioctls
+ * with SIOCGIWPRIV and *must* use arguments as defined below.
+ * If you don't follow those rules, DaveM is going to hate you (reason :
+ * it make mixed 32/64bit operation impossible).
+ */
+#define SIOCIWFIRSTPRIV 0x8BE0
+#define SIOCIWLASTPRIV 0x8BFF
+/* Previously, we were using SIOCDEVPRIVATE, but we now have our
+ * separate range because of collisions with other tools such as
+ * 'mii-tool'.
+ * We now have 32 commands, so a bit more space ;-).
+ * Also, all 'odd' commands are only usable by root and don't return the
+ * content of ifr/iwr to user (but you are not obliged to use the set/get
+ * convention, just use every other two command).
+ * And I repeat : you are not obliged to use them with iwspy, but you
+ * must be compliant with it.
+ */
+
+/* ------------------------- IOCTL STUFF ------------------------- */
+
+/* The first and the last (range) */
+#define SIOCIWFIRST 0x8B00
+#define SIOCIWLAST SIOCIWLASTPRIV /* 0x8BFF */
+
+/* Even : get (world access), odd : set (root access) */
+#define IW_IS_SET(cmd) (!((cmd) & 0x1))
+#define IW_IS_GET(cmd) ((cmd) & 0x1)
+
+/* ----------------------- WIRELESS EVENTS ----------------------- */
+/* Those are *NOT* ioctls, do not issue request on them !!! */
+/* Most events use the same identifier as ioctl requests */
+
+#define IWEVTXDROP 0x8C00 /* Packet dropped to excessive retry */
+#define IWEVQUAL 0x8C01 /* Quality part of statistics (scan) */
+#define IWEVCUSTOM 0x8C02 /* Driver specific ascii string */
+#define IWEVREGISTERED 0x8C03 /* Discovered a new node (AP mode) */
+#define IWEVEXPIRED 0x8C04 /* Expired a node (AP mode) */
+
+#define IWEVFIRST 0x8C00
+
+/* ------------------------- PRIVATE INFO ------------------------- */
+/*
+ * The following is used with SIOCGIWPRIV. It allow a driver to define
+ * the interface (name, type of data) for its private ioctl.
+ * Privates ioctl are SIOCIWFIRSTPRIV -> SIOCIWLASTPRIV
+ */
+
+#define IW_PRIV_TYPE_MASK 0x7000 /* Type of arguments */
+#define IW_PRIV_TYPE_NONE 0x0000
+#define IW_PRIV_TYPE_BYTE 0x1000 /* Char as number */
+#define IW_PRIV_TYPE_CHAR 0x2000 /* Char as character */
+#define IW_PRIV_TYPE_INT 0x4000 /* 32 bits int */
+#define IW_PRIV_TYPE_FLOAT 0x5000 /* struct iw_freq */
+#define IW_PRIV_TYPE_ADDR 0x6000 /* struct sockaddr */
+
+#define IW_PRIV_SIZE_FIXED 0x0800 /* Variable or fixed number of args */
+
+#define IW_PRIV_SIZE_MASK 0x07FF /* Max number of those args */
+
+/*
+ * Note : if the number of args is fixed and the size < 16 octets,
+ * instead of passing a pointer we will put args in the iwreq struct...
+ */
+
+/* ----------------------- OTHER CONSTANTS ----------------------- */
+
+/* Maximum frequencies in the range struct */
+#define IW_MAX_FREQUENCIES 32
+/* Note : if you have something like 80 frequencies,
+ * don't increase this constant and don't fill the frequency list.
+ * The user will be able to set by channel anyway... */
+
+/* Maximum bit rates in the range struct */
+#define IW_MAX_BITRATES 32
+
+/* Maximum tx powers in the range struct */
+#define IW_MAX_TXPOWER 8
+/* Note : if you more than 8 TXPowers, just set the max and min or
+ * a few of them in the struct iw_range. */
+
+/* Maximum of address that you may set with SPY */
+#define IW_MAX_SPY 8
+
+/* Maximum of address that you may get in the
+ list of access points in range */
+#define IW_MAX_AP 64
+
+/* Maximum size of the ESSID and NICKN strings */
+#define IW_ESSID_MAX_SIZE 32
+
+/* Modes of operation */
+#define IW_MODE_AUTO 0 /* Let the driver decides */
+#define IW_MODE_ADHOC 1 /* Single cell network */
+#define IW_MODE_INFRA 2 /* Multi cell network, roaming, ... */
+#define IW_MODE_MASTER 3 /* Synchronisation master or Access Point */
+#define IW_MODE_REPEAT 4 /* Wireless Repeater (forwarder) */
+#define IW_MODE_SECOND 5 /* Secondary master/repeater (backup) */
+#define IW_MODE_MONITOR 6 /* Passive monitor (listen only) */
+
+/* Maximum number of size of encoding token available
+ * they are listed in the range structure */
+#define IW_MAX_ENCODING_SIZES 8
+
+/* Maximum size of the encoding token in bytes */
+#define IW_ENCODING_TOKEN_MAX 32 /* 256 bits (for now) */
+
+/* Flags for encoding (along with the token) */
+#define IW_ENCODE_INDEX 0x00FF /* Token index (if needed) */
+#define IW_ENCODE_FLAGS 0xFF00 /* Flags defined below */
+#define IW_ENCODE_MODE 0xF000 /* Modes defined below */
+#define IW_ENCODE_DISABLED 0x8000 /* Encoding disabled */
+#define IW_ENCODE_ENABLED 0x0000 /* Encoding enabled */
+#define IW_ENCODE_RESTRICTED 0x4000 /* Refuse non-encoded packets */
+#define IW_ENCODE_OPEN 0x2000 /* Accept non-encoded packets */
+#define IW_ENCODE_NOKEY 0x0800 /* Key is write only, so not present */
+#define IW_ENCODE_TEMP 0x0400 /* Temporary key */
+
+/* Power management flags available (along with the value, if any) */
+#define IW_POWER_ON 0x0000 /* No details... */
+#define IW_POWER_TYPE 0xF000 /* Type of parameter */
+#define IW_POWER_PERIOD 0x1000 /* Value is a period/duration of */
+#define IW_POWER_TIMEOUT 0x2000 /* Value is a timeout (to go asleep) */
+#define IW_POWER_MODE 0x0F00 /* Power Management mode */
+#define IW_POWER_UNICAST_R 0x0100 /* Receive only unicast messages */
+#define IW_POWER_MULTICAST_R 0x0200 /* Receive only multicast messages */
+#define IW_POWER_ALL_R 0x0300 /* Receive all messages though PM */
+#define IW_POWER_FORCE_S 0x0400 /* Force PM procedure for sending unicast */
+#define IW_POWER_REPEATER 0x0800 /* Repeat broadcast messages in PM period */
+#define IW_POWER_MODIFIER 0x000F /* Modify a parameter */
+#define IW_POWER_MIN 0x0001 /* Value is a minimum */
+#define IW_POWER_MAX 0x0002 /* Value is a maximum */
+#define IW_POWER_RELATIVE 0x0004 /* Value is not in seconds/ms/us */
+
+/* Transmit Power flags available */
+#define IW_TXPOW_TYPE 0x00FF /* Type of value */
+#define IW_TXPOW_DBM 0x0000 /* Value is in dBm */
+#define IW_TXPOW_MWATT 0x0001 /* Value is in mW */
+#define IW_TXPOW_RANGE 0x1000 /* Range of value between min/max */
+
+/* Retry limits and lifetime flags available */
+#define IW_RETRY_ON 0x0000 /* No details... */
+#define IW_RETRY_TYPE 0xF000 /* Type of parameter */
+#define IW_RETRY_LIMIT 0x1000 /* Maximum number of retries*/
+#define IW_RETRY_LIFETIME 0x2000 /* Maximum duration of retries in us */
+#define IW_RETRY_MODIFIER 0x000F /* Modify a parameter */
+#define IW_RETRY_MIN 0x0001 /* Value is a minimum */
+#define IW_RETRY_MAX 0x0002 /* Value is a maximum */
+#define IW_RETRY_RELATIVE 0x0004 /* Value is not in seconds/ms/us */
+
+/* Scanning request flags */
+#define IW_SCAN_DEFAULT 0x0000 /* Default scan of the driver */
+#define IW_SCAN_ALL_ESSID 0x0001 /* Scan all ESSIDs */
+#define IW_SCAN_THIS_ESSID 0x0002 /* Scan only this ESSID */
+#define IW_SCAN_ALL_FREQ 0x0004 /* Scan all Frequencies */
+#define IW_SCAN_THIS_FREQ 0x0008 /* Scan only this Frequency */
+#define IW_SCAN_ALL_MODE 0x0010 /* Scan all Modes */
+#define IW_SCAN_THIS_MODE 0x0020 /* Scan only this Mode */
+#define IW_SCAN_ALL_RATE 0x0040 /* Scan all Bit-Rates */
+#define IW_SCAN_THIS_RATE 0x0080 /* Scan only this Bit-Rate */
+/* Maximum size of returned data */
+#define IW_SCAN_MAX_DATA 4096 /* In bytes */
+
+/* Max number of char in custom event - use multiple of them if needed */
+#define IW_CUSTOM_MAX 256 /* In bytes */
+
+/****************************** TYPES ******************************/
+
+/* --------------------------- SUBTYPES --------------------------- */
+/*
+ * Generic format for most parameters that fit in an int
+ */
+struct iw_param
+{
+ __s32 value; /* The value of the parameter itself */
+ __u8 fixed; /* Hardware should not use auto select */
+ __u8 disabled; /* Disable the feature */
+ __u16 flags; /* Various specifc flags (if any) */
+};
+
+/*
+ * For all data larger than 16 octets, we need to use a
+ * pointer to memory allocated in user space.
+ */
+struct iw_point
+{
+ caddr_t pointer; /* Pointer to the data (in user space) */
+ __u16 length; /* number of fields or size in bytes */
+ __u16 flags; /* Optional params */
+};
+
+/*
+ * A frequency
+ * For numbers lower than 10^9, we encode the number in 'm' and
+ * set 'e' to 0
+ * For number greater than 10^9, we divide it by the lowest power
+ * of 10 to get 'm' lower than 10^9, with 'm'= f / (10^'e')...
+ * The power of 10 is in 'e', the result of the division is in 'm'.
+ */
+struct iw_freq
+{
+ __s32 m; /* Mantissa */
+ __s16 e; /* Exponent */
+ __u8 i; /* List index (when in range struct) */
+ __u8 pad; /* Unused - just for alignement */
+};
+
+/*
+ * Quality of the link
+ */
+struct iw_quality
+{
+ __u8 qual; /* link quality (%retries, SNR,
+ %missed beacons or better...) */
+ __u8 level; /* signal level (dBm) */
+ __u8 noise; /* noise level (dBm) */
+ __u8 updated; /* Flags to know if updated */
+};
+
+/*
+ * Packet discarded in the wireless adapter due to
+ * "wireless" specific problems...
+ * Note : the list of counter and statistics in net_device_stats
+ * is already pretty exhaustive, and you should use that first.
+ * This is only additional stats...
+ */
+struct iw_discarded
+{
+ __u32 nwid; /* Rx : Wrong nwid/essid */
+ __u32 code; /* Rx : Unable to code/decode (WEP) */
+ __u32 fragment; /* Rx : Can't perform MAC reassembly */
+ __u32 retries; /* Tx : Max MAC retries num reached */
+ __u32 misc; /* Others cases */
+};
+
+/*
+ * Packet/Time period missed in the wireless adapter due to
+ * "wireless" specific problems...
+ */
+struct iw_missed
+{
+ __u32 beacon; /* Missed beacons/superframe */
+};
+
+/*
+ * Quality range (for spy threshold)
+ */
+struct iw_thrspy
+{
+ struct sockaddr addr; /* Source address (hw/mac) */
+ struct iw_quality qual; /* Quality of the link */
+ struct iw_quality low; /* Low threshold */
+ struct iw_quality high; /* High threshold */
+};
+
+/* ------------------------ WIRELESS STATS ------------------------ */
+/*
+ * Wireless statistics (used for /proc/net/wireless)
+ */
+struct iw_statistics
+{
+ __u16 status; /* Status
+ * - device dependent for now */
+
+ struct iw_quality qual; /* Quality of the link
+ * (instant/mean/max) */
+ struct iw_discarded discard; /* Packet discarded counts */
+ struct iw_missed miss; /* Packet missed counts */
+};
+
+/* ------------------------ IOCTL REQUEST ------------------------ */
+/*
+ * This structure defines the payload of an ioctl, and is used
+ * below.
+ *
+ * Note that this structure should fit on the memory footprint
+ * of iwreq (which is the same as ifreq), which mean a max size of
+ * 16 octets = 128 bits. Warning, pointers might be 64 bits wide...
+ * You should check this when increasing the structures defined
+ * above in this file...
+ */
+union iwreq_data
+{
+ /* Config - generic */
+ char name[IFNAMSIZ];
+ /* Name : used to verify the presence of wireless extensions.
+ * Name of the protocol/provider... */
+
+ struct iw_point essid; /* Extended network name */
+ struct iw_param nwid; /* network id (or domain - the cell) */
+ struct iw_freq freq; /* frequency or channel :
+ * 0-1000 = channel
+ * > 1000 = frequency in Hz */
+
+ struct iw_param sens; /* signal level threshold */
+ struct iw_param bitrate; /* default bit rate */
+ struct iw_param txpower; /* default transmit power */
+ struct iw_param rts; /* RTS threshold threshold */
+ struct iw_param frag; /* Fragmentation threshold */
+ __u32 mode; /* Operation mode */
+ struct iw_param retry; /* Retry limits & lifetime */
+
+ struct iw_point encoding; /* Encoding stuff : tokens */
+ struct iw_param power; /* PM duration/timeout */
+ struct iw_quality qual; /* Quality part of statistics */
+
+ struct sockaddr ap_addr; /* Access point address */
+ struct sockaddr addr; /* Destination address (hw/mac) */
+
+ struct iw_param param; /* Other small parameters */
+ struct iw_point data; /* Other large parameters */
+};
+
+/*
+ * The structure to exchange data for ioctl.
+ * This structure is the same as 'struct ifreq', but (re)defined for
+ * convenience...
+ * Do I need to remind you about structure size (32 octets) ?
+ */
+struct iwreq
+{
+ union
+ {
+ char ifrn_name[IFNAMSIZ]; /* if name, e.g. "eth0" */
+ } ifr_ifrn;
+
+ /* Data part (defined just above) */
+ union iwreq_data u;
+};
+
+/* -------------------------- IOCTL DATA -------------------------- */
+/*
+ * For those ioctl which want to exchange mode data that what could
+ * fit in the above structure...
+ */
+
+/*
+ * Range of parameters
+ */
+
+struct iw_range
+{
+ /* Informative stuff (to choose between different interface) */
+ __u32 throughput; /* To give an idea... */
+ /* In theory this value should be the maximum benchmarked
+ * TCP/IP throughput, because with most of these devices the
+ * bit rate is meaningless (overhead an co) to estimate how
+ * fast the connection will go and pick the fastest one.
+ * I suggest people to play with Netperf or any benchmark...
+ */
+
+ /* NWID (or domain id) */
+ __u32 min_nwid; /* Minimal NWID we are able to set */
+ __u32 max_nwid; /* Maximal NWID we are able to set */
+
+ /* Old Frequency (backward compat - moved lower ) */
+ __u16 old_num_channels;
+ __u8 old_num_frequency;
+ /* Filler to keep "version" at the same offset */
+ __s32 old_freq[6];
+
+ /* signal level threshold range */
+ __s32 sensitivity;
+
+ /* Quality of link & SNR stuff */
+ /* Quality range (link, level, noise)
+ * If the quality is absolute, it will be in the range [0 ; max_qual],
+ * if the quality is dBm, it will be in the range [max_qual ; 0].
+ * Don't forget that we use 8 bit arithmetics... */
+ struct iw_quality max_qual; /* Quality of the link */
+ /* This should contain the average/typical values of the quality
+ * indicator. This should be the threshold between a "good" and
+ * a "bad" link (example : monitor going from green to orange).
+ * Currently, user space apps like quality monitors don't have any
+ * way to calibrate the measurement. With this, they can split
+ * the range between 0 and max_qual in different quality level
+ * (using a geometric subdivision centered on the average).
+ * I expect that people doing the user space apps will feedback
+ * us on which value we need to put in each driver... */
+ struct iw_quality avg_qual; /* Quality of the link */
+
+ /* Rates */
+ __u8 num_bitrates; /* Number of entries in the list */
+ __s32 bitrate[IW_MAX_BITRATES]; /* list, in bps */
+
+ /* RTS threshold */
+ __s32 min_rts; /* Minimal RTS threshold */
+ __s32 max_rts; /* Maximal RTS threshold */
+
+ /* Frag threshold */
+ __s32 min_frag; /* Minimal frag threshold */
+ __s32 max_frag; /* Maximal frag threshold */
+
+ /* Power Management duration & timeout */
+ __s32 min_pmp; /* Minimal PM period */
+ __s32 max_pmp; /* Maximal PM period */
+ __s32 min_pmt; /* Minimal PM timeout */
+ __s32 max_pmt; /* Maximal PM timeout */
+ __u16 pmp_flags; /* How to decode max/min PM period */
+ __u16 pmt_flags; /* How to decode max/min PM timeout */
+ __u16 pm_capa; /* What PM options are supported */
+
+ /* Encoder stuff */
+ __u16 encoding_size[IW_MAX_ENCODING_SIZES]; /* Different token sizes */
+ __u8 num_encoding_sizes; /* Number of entry in the list */
+ __u8 max_encoding_tokens; /* Max number of tokens */
+ /* For drivers that need a "login/passwd" form */
+ __u8 encoding_login_index; /* token index for login token */
+
+ /* Transmit power */
+ __u16 txpower_capa; /* What options are supported */
+ __u8 num_txpower; /* Number of entries in the list */
+ __s32 txpower[IW_MAX_TXPOWER]; /* list, in bps */
+
+ /* Wireless Extension version info */
+ __u8 we_version_compiled; /* Must be WIRELESS_EXT */
+ __u8 we_version_source; /* Last update of source */
+
+ /* Retry limits and lifetime */
+ __u16 retry_capa; /* What retry options are supported */
+ __u16 retry_flags; /* How to decode max/min retry limit */
+ __u16 r_time_flags; /* How to decode max/min retry life */
+ __s32 min_retry; /* Minimal number of retries */
+ __s32 max_retry; /* Maximal number of retries */
+ __s32 min_r_time; /* Minimal retry lifetime */
+ __s32 max_r_time; /* Maximal retry lifetime */
+
+ /* Frequency */
+ __u16 num_channels; /* Number of channels [0; num - 1] */
+ __u8 num_frequency; /* Number of entry in the list */
+ struct iw_freq freq[IW_MAX_FREQUENCIES]; /* list */
+ /* Note : this frequency list doesn't need to fit channel numbers,
+ * because each entry contain its channel index */
+};
+
+/*
+ * Private ioctl interface information
+ */
+
+struct iw_priv_args
+{
+ __u32 cmd; /* Number of the ioctl to issue */
+ __u16 set_args; /* Type and number of args */
+ __u16 get_args; /* Type and number of args */
+ char name[IFNAMSIZ]; /* Name of the extension */
+};
+
+/* ----------------------- WIRELESS EVENTS ----------------------- */
+/*
+ * Wireless events are carried through the rtnetlink socket to user
+ * space. They are encapsulated in the IFLA_WIRELESS field of
+ * a RTM_NEWLINK message.
+ */
+
+/*
+ * A Wireless Event. Contains basically the same data as the ioctl...
+ */
+struct iw_event
+{
+ __u16 len; /* Real lenght of this stuff */
+ __u16 cmd; /* Wireless IOCTL */
+ union iwreq_data u; /* IOCTL fixed payload */
+};
+
+/* Size of the Event prefix (including padding and alignement junk) */
+#define IW_EV_LCP_LEN (sizeof(struct iw_event) - sizeof(union iwreq_data))
+/* Size of the various events */
+#define IW_EV_CHAR_LEN (IW_EV_LCP_LEN + IFNAMSIZ)
+#define IW_EV_UINT_LEN (IW_EV_LCP_LEN + sizeof(__u32))
+#define IW_EV_FREQ_LEN (IW_EV_LCP_LEN + sizeof(struct iw_freq))
+#define IW_EV_POINT_LEN (IW_EV_LCP_LEN + sizeof(struct iw_point))
+#define IW_EV_PARAM_LEN (IW_EV_LCP_LEN + sizeof(struct iw_param))
+#define IW_EV_ADDR_LEN (IW_EV_LCP_LEN + sizeof(struct sockaddr))
+#define IW_EV_QUAL_LEN (IW_EV_LCP_LEN + sizeof(struct iw_quality))
+
+/* Note : in the case of iw_point, the extra data will come at the
+ * end of the event */
+
+#endif /* _LINUX_WIRELESS_H */