11 files changed, 30 insertions, 34 deletions

diff --git a/libopie2/opiecore/device/odevice.cpp b/libopie2/opiecore/device/odevice.cpp
index b5ae4e5..8b64c41 100644
--- a/libopie2/opiecore/device/odevice.cpp
+++ b/libopie2/opiecore/device/odevice.cpp
@@ -289,102 +289,102 @@ bool ODevice::suspend()
 
     if ( res ) {
         do { // wait at most 1.5 sec: either suspend didn't work or the device resumed
             ::usleep ( 200 * 1000 );
             ::gettimeofday ( &tvn, 0 );
         } while ((( tvn. tv_sec - tvs. tv_sec ) * 1000 + ( tvn. tv_usec - tvs. tv_usec ) / 1000 ) < 1500 );
     }
 
     return res;
 }
 
 //#include <linux/fb.h> better not rely on kernel headers in userspace ...
 
 #define FBIOBLANK             OD_IO( 'F', 0x11 ) // 0x4611
 
 /* VESA Blanking Levels */
 #define VESA_NO_BLANKING      0
 #define VESA_VSYNC_SUSPEND    1
 #define VESA_HSYNC_SUSPEND    2
 #define VESA_POWERDOWN        3
 
 /**
 * This sets the display on or off
 */
 bool ODevice::setDisplayStatus ( bool on )
 {
     qDebug("ODevice::setDisplayStatus(%d)", on);
 
     if ( d->m_model == Model_Unknown )
         return false;
 
     bool res = false;
     int fd;
 
 #ifdef QT_QWS_DEVFS
     if (( fd = ::open ( "/dev/fb/0", O_RDWR )) >= 0 ) {
 #else
     if (( fd = ::open ( "/dev/fb0", O_RDWR )) >= 0 ) {
 #endif
         res = ( ::ioctl ( fd, FBIOBLANK, on ? VESA_NO_BLANKING : VESA_POWERDOWN ) == 0 );
         ::close ( fd );
     }
     return res;
 }
 
 /**
 * This sets the display brightness
 *
-* @param p The brightness to be set on a scale from 0 to 255
+* @param b The brightness to be set on a scale from 0 to 255
 * @return success or failure
 */
-bool ODevice::setDisplayBrightness ( int p)
+bool ODevice::setDisplayBrightness ( int b)
 {
-        Q_UNUSED( p )
+        Q_UNUSED( b )
     return false;
 }
 
 /**
  * 
  * @return Returns the number of steppings on the brightness slider
  * in the Light-'n-Power settings. Values smaller zero and bigger
  * than 255 do not make sense.
  *
  * \sa QSlider::setLineStep
  * \sa QSlider::setPageStep
  */
 int ODevice::displayBrightnessResolution() const
 {
     return 16;
 }
 
 /**
 * This sets the display contrast
 * @param p The contrast to be set on a scale from 0 to 255
 * @return success or failure
 */
 bool ODevice::setDisplayContrast ( int p)
 {
         Q_UNUSED( p )
     return false;
 }
 
 /**
 * @return return the max value for the brightness settings slider
 *         or 0 if the device doesn't support setting of a contrast
 */
 int ODevice::displayContrastResolution() const
 {
     return 0;
 }
 
 /**
 * This returns the vendor as string
 * @return Vendor as QString
 */
 QString ODevice::vendorString() const
 {
     return d->m_vendorstr;
 }
 
 /**
 * This returns the vendor as one of the values of OVendor
diff --git a/libopie2/opiecore/oconfig.h b/libopie2/opiecore/oconfig.h
index ab95dc3..05a1a25 100644
--- a/libopie2/opiecore/oconfig.h
+++ b/libopie2/opiecore/oconfig.h
@@ -82,82 +82,82 @@ private:
     class Private;
     Private *d;
 };
 
 /**
  * @brief Helper class for easier use of OConfig groups.
  *
  * Careful programmers always set the group of a
  * @ref OConfig object to the group they want to read from
  * and set it back to the old one of afterwards. This is usually
  * written as:
  * <pre>
  *
  * QString oldgroup config()->group();
  * config()->setGroup( "TheGroupThatIWant" );
  * ...
  * config()->writeEntry( "Blah", "Blubb" );
  *
  * config()->setGroup( oldgroup );
  * </pre>
  *
  * In order to facilitate this task, you can use
  * OConfigGroupSaver. Simply construct such an object ON THE STACK
  * when you want to switch to a new group. Then, when the object goes
  * out of scope, the group will automatically be restored. If you
  * want to use several different groups within a function or method,
  * you can still use OConfigGroupSaver: Simply enclose all work with
  * one group (including the creation of the OConfigGroupSaver object)
  * in one block.
  *
  * \code
  * OConfigGroupSaver saver(cfg,"TheGroupThatInWhat");
  * \endcode
  *
  * Note that OConfigGroupSaver (cfg,"TheGroupThatInWhat"); would get imediately
  * destructed after created and that you would save in the old group which
  * is unwished.
  *
  * @author Matthias Kalle Dalheimer <Kalle@kde.org>
  * @version $Id$
  * @see OConfig
  */
 
 class OConfigGroupSaver
 {
   public:
     /**
      * Constructor.
-     * Create the object giving a @config object and a @a group to become
+     * Create the object giving a OConfig object and a @a group to become
      * the current group.
      */
     OConfigGroupSaver( OConfig* config, QString group ) :_config(config), _oldgroup(config->group() )
         { _config->setGroup( group ); }
 
     OConfigGroupSaver( OConfig* config, const char *group ) :_config(config), _oldgroup(config->group())
         { _config->setGroup( group ); }
 
     OConfigGroupSaver( OConfig* config, const QCString &group ) : _config(config), _oldgroup(config->group())
         { _config->setGroup( group ); }
     /**
      * Destructor.
      * Restores the last current group.
      * @todo make it not inline for bc reasons. See KDE BC guide
      */
     ~OConfigGroupSaver() { _config->setGroup( _oldgroup ); }
 
     OConfig* config() { return _config; };
 
   private:
     OConfig* _config;
     QString _oldgroup;
 
     OConfigGroupSaver( const OConfigGroupSaver& );
     OConfigGroupSaver& operator=( const OConfigGroupSaver& );
 
     class Private;
     Private *d;
 };
 }
 }
 
 #endif // OCONFIG_H
diff --git a/libopie2/opiecore/odebug.h b/libopie2/opiecore/odebug.h
index 21a6c26..18dc09e 100644
--- a/libopie2/opiecore/odebug.h
+++ b/libopie2/opiecore/odebug.h
@@ -371,121 +371,121 @@ class ondbgstream {
     /**
      * Does nothing.
      * @return this stream
      */
     ondbgstream& operator<<(double) { return *this; }
     /**
      * Does nothing.
      * @return this stream
      */
     ondbgstream& operator<<(long) { return *this; }
     /**
      * Does nothing.
      * @return this stream
      */
     ondbgstream& operator<<(unsigned long) { return *this; }
     /**
      * Does nothing.
      * @return this stream
      */
     ondbgstream& operator << (QWidget*) { return *this; }
     /**
      * Does nothing.
      * @return this stream
      */
     ondbgstream &form(const char *, ...) { return *this; }
 
     ondbgstream& operator<<( const QDateTime& ) { return *this; }
     ondbgstream& operator<<( const QDate&     ) { return *this; }
     ondbgstream& operator<<( const QTime&     ) { return *this; }
     ondbgstream& operator<<( const QPoint & )  { return *this; }
     ondbgstream& operator<<( const QSize & )  { return *this; }
     ondbgstream& operator<<( const QRect & )  { return *this; }
     ondbgstream& operator<<( const QRegion & ) { return *this; }
     ondbgstream& operator<<( const QStringList & ) { return *this; }
     ondbgstream& operator<<( const QColor & ) { return *this; }
     ondbgstream& operator<<( const QBrush & ) { return *this; }
 
 private:
     class Private;
     Private *d;
 };
 
 /*======================================================================================
  * related functions
  *======================================================================================*/
 
 /**
  * Does nothing.
- * @param a stream
+ * @param s stream
  * @return the given @p s
  */
 inline ondbgstream& endl( ondbgstream & s) { return s; }
 /**
  * Does nothing.
- * @param a stream
+ * @param s stream
  * @return the given @p s
  */
 inline ondbgstream& flush( ondbgstream & s) { return s; }
 inline ondbgstream& perror( ondbgstream & s) { return s; }
 
 /**
  * Returns a debug stream. You can use it to print debug
  * information.
  * @param area an id to identify the output, 0 for default
  */
 odbgstream odDebug(int area = 0);
 odbgstream odDebug(bool cond, int area = 0);
 /**
  * Returns a backtrace.
  * @param levels the number of levels (-1 for unlimited) of the backtrace
  * @return a backtrace
  */
 QString odBacktrace(int levels = -1);
 /**
  * Returns a dummy debug stream. The stream does not print anything.
  * @param area an id to identify the output, 0 for default
  * @see odDebug()
  */
-inline ondbgstream ondDebug(int = 0) { return ondbgstream(); }
+inline ondbgstream ondDebug(int area = 0) { return ondbgstream(); }
 inline ondbgstream ondDebug(bool , int  = 0) { return ondbgstream(); }
 inline QString ondBacktrace() { return QString::null; }
 inline QString ondBacktrace(int) { return QString::null; }
 
 /**
  * Returns a warning stream. You can use it to print warning
  * information.
  * @param area an id to identify the output, 0 for default
  */
 odbgstream odWarning(int area = 0);
 odbgstream odWarning(bool cond, int area = 0);
 /**
  * Returns an error stream. You can use it to print error
  * information.
  * @param area an id to identify the output, 0 for default
  */
 odbgstream odError(int area = 0);
 odbgstream odError(bool cond, int area = 0);
 /**
  * Returns a fatal error stream. You can use it to print fatal error
  * information.
  * @param area an id to identify the output, 0 for default
  */
 odbgstream odFatal(int area = 0);
 odbgstream odFatal(bool cond, int area = 0);
 
 /**
  * Deletes the odebugrc cache and therefore forces KDebug to reread the
  * config file
  */
 void odClearDebugConfig();
 
 #ifdef OPIE_NO_DEBUG
 #define odDebug ondDebug
 #define odBacktrace ondBacktrace
 #endif
 
 }
 }
 
 #endif
 
diff --git a/libopie2/opiecore/okeyconfigmanager.cpp b/libopie2/opiecore/okeyconfigmanager.cpp
index 891cda7..48546bd 100644
--- a/libopie2/opiecore/okeyconfigmanager.cpp
+++ b/libopie2/opiecore/okeyconfigmanager.cpp
@@ -52,97 +52,97 @@ OKeyPair::OKeyPair( int key, int mod )
  * The destructor
  */
 OKeyPair::~OKeyPair() {}
 
 
 /**
  * Is this OKeyPair empty/valid?
  */
 bool OKeyPair::isEmpty()const {
     return ( ( m_key == -1 )&& ( m_mod == -1 ) );
 }
 
 /**
  * get the keycode for this OKeyPair. The Key relates to Qt::Key.
  *
  * @see Qt::Key
  * @see setKey
  */
 int OKeyPair::keycode()const {
     return m_key;
 }
 
 /**
  * get the modifier key for this OKeyPair. The Modifier State relates
  * to the Qt::ButtonState
  *
  * @see Qt::ButtonState
  * @see setModifier
  */
 int OKeyPair::modifier()const {
     return m_mod;
 }
 
 
 /**
  * Set the keycode
  * @param key The Keycode to set
  *
  * @see keycode()
  * @see Qt::Key
  */
 void OKeyPair::setKeycode( int key ) {
     m_key = key;
 }
 
 /**
  * Set the modifier key
  *
- * @param the Modifier key
+ * @param mod the Modifier key
  * @see Qt::ButtonState
  * @see modifier()
  */
 void OKeyPair::setModifier( int mod ) {
     m_mod = mod;
 }
 
 /**
  * Return  an OKeyPair for the Return Key without any modifier.
  */
 OKeyPair OKeyPair::returnKey() {
     return OKeyPair( Qt::Key_Return, 0 );
 }
 
 /**
  * Return an OKeyPair for the Left Arrow Key
  * without any modifier Key
  */
 OKeyPair OKeyPair::leftArrowKey() {
     return OKeyPair( Qt::Key_Left, 0 );
 }
 
 /**
  * Return an OKeyPair for the Right Arrow Key
  * without any modifier Key
  */
 OKeyPair OKeyPair::rightArrowKey() {
     return OKeyPair( Qt::Key_Right, 0 );
 }
 
 /**
  * Return an OKeyPair for the Up Arrow Key
  * without any modifier Key
  */
 OKeyPair OKeyPair::upArrowKey() {
     return OKeyPair( Qt::Key_Up, 0 );
 }
 
 /**
  * Return an OKeyPair for the Down Arrow Key
  * without any modifier Key
  */
 OKeyPair OKeyPair::downArrowKey() {
     return OKeyPair( Qt::Key_Down, 0 );
 }
 
 /**
  * Return an Empty OKeyPair
diff --git a/libopie2/opiecore/okeyfilter.h b/libopie2/opiecore/okeyfilter.h
index d183641..1871247 100644
--- a/libopie2/opiecore/okeyfilter.h
+++ b/libopie2/opiecore/okeyfilter.h
@@ -20,81 +20,81 @@ _;:,     .>    :=|.         This program is free software; you can
 :     =  ...= . :.=-
 -.   .:....=;==+<;          You should have received a copy of the GNU
  -_. . .   )=.  =           Library General Public License along with
    --        :-=`           this library; see the file COPYING.LIB.
                             If not, write to the Free Software Foundation,
                             Inc., 59 Temple Place - Suite 330,
                             Boston, MA 02111-1307, USA.
 */
 
 /* QT */
 #include <qwindowsystem_qws.h>
 #include <qvaluelist.h>
 
 namespace Opie {
 namespace Core {
     class ODevice;
 
 
 /**
  * A singleton which will manage all possible keyboard filters inside opie.
  * It makes sure that key handlers of odevice are checked first than the
  * keyfilters of software.
  * @short a keyfilter proxy
  * @see QWSServer::KeyboardFilter
  * @author Rajko Albrecht
  * @version 1.0
  */
 class OKeyFilter
 {
     friend class Opie::Core::ODevice;
 
 protected:
     /**
      * Protected constructor - generate class via inst()
      * @see inst()
      */
     OKeyFilter();
     /**
      * Protected constructor - generate class via inst()
      * @see inst()
      */
     OKeyFilter(const OKeyFilter&){};
     /**
      * Append filter to the primary list.
      * This is only allowed for friend classes from odevice
      * @param aFilter a filter to append
      * @see addHandler
      */
-    virtual void addPreHandler(QWSServer::KeyboardFilter*aFilter)=0;
+    virtual void addPreHandler(QWSServer::KeyboardFilter *aFilter)=0;
     /**
      * Remove the specified filter from list and give back ownership.
      * This is only allowed for friend classes from odevice
      * @param aFilter a filter to remove
      * @see remHandler
      */
-    virtual void remPreHandler(QWSServer::KeyboardFilter*aFilter)=0;
+    virtual void remPreHandler(QWSServer::KeyboardFilter *aFilter)=0;
 
 public:
     virtual ~OKeyFilter();
     /**
      * Append filter to the secondary list.
      * @param aFilter a filter to append
      * @see addPreHandler
      */
-    virtual void addHandler(QWSServer::KeyboardFilter*)=0;
+    virtual void addHandler(QWSServer::KeyboardFilter *aFilter)=0;
     /**
      * Remove the specified filter from list and give back ownership.
      * @param aFilter a filter to remove
      * @see remPreHandler
      */
-    virtual void remHandler(QWSServer::KeyboardFilter*)=0;
+    virtual void remHandler(QWSServer::KeyboardFilter *aFilter)=0;
 
     /**
      * Returns a handler to an instance of OKeyFilter
      * @return a pointer to a working OKeyFilter
      */
     static OKeyFilter*inst();
 };
 
 }
 }
diff --git a/libopie2/opiecore/opluginloader.cpp b/libopie2/opiecore/opluginloader.cpp
index ec19fa0..2a6e369 100644
--- a/libopie2/opiecore/opluginloader.cpp
+++ b/libopie2/opiecore/opluginloader.cpp
@@ -478,97 +478,97 @@ void OGenericPluginLoader::setSafeMode(const QString& str, bool b) {
  */
 void OGenericPluginLoader::setPluginDirs( const QStringList& lst ) {
     m_plugDirs = lst;
 }
 
 /**
  *
  * @internal
  * Set the Plugin Dir to str. Str will be the only element in the list of plugin dirs
  */
 void OGenericPluginLoader::setPluginDir( const QString& str) {
     m_plugDirs.clear();
     m_plugDirs.append( str );
 }
 
 
 /**
  * @internal
  */
 bool OGenericPluginLoader::isSorted()const{
     return m_isSorted;
 }
 
 /*
  * make libfoo.so.1.0.0 -> foo on UNIX
  * make libfoo.dylib    -> foo on MAC OS X Unix
  * windows is obviously missing
  */
 /**
  * @internal
  */
 QString OGenericPluginLoader::unlibify( const QString& str ) {
     QString st = str.mid( str.find( "lib" )+3 );
 #ifdef Q_OS_MACX
     return st.left( st.findRev( ".dylib" ) );
 #else
     return st.left( st.findRev( ".so" ) );
 #endif
 }
 
 /**
  * @internal
  *
  * \brief method to return available plugins. Internal and for reeimplementations
  *
  *Return a List of Plugins for a dir and add positions and remove disabled.
  * If a plugin is on the excluded list assign position -2
  *
- * @param dir The dir to look in
+ * @param _dir The dir to look in
  * @param sorted Should positions be read?
  * @param disabled Remove excluded from the list
  */
 OPluginItem::List OGenericPluginLoader::plugins( const QString& _dir, bool sorted, bool disabled )const {
 #ifdef Q_OS_MACX
     QDir dir( _dir, "lib*.dylib" );
 #else
     QDir dir( _dir, "lib*.so" );
 #endif
 
 
     OPluginItem::List lst;
 
     /*
      * get excluded list and then iterate over them
      * Excluded list contains the name
      * Position is a list with 'name.pos.name.pos.name.pos'
      *
      * For the look up we will create two QMap<QString,pos>
      */
     QMap<QString, int> positionMap;
     QMap<QString, int> excludedMap;
 
 
     OConfig cfg( m_dir+"-odpplugins" );
     cfg.setGroup( _dir );
 
 
     QStringList excludes = cfg.readListEntry( "Excluded", ',' );
     for ( QStringList::Iterator it = excludes.begin(); it != excludes.end(); ++it )
         excludedMap.insert( *it, -2 );
 
     if ( sorted ) {
         QStringList pos =  cfg.readListEntry( "Positions", '.' );
         QStringList::Iterator it = pos.begin();
         QString tmp; int i;
         while ( it != pos.end() ) {
             tmp = *it++; i = (*it++).toInt();
             positionMap.insert(  tmp, i );
         }
 
     }
 
 
 
 
     QStringList list = dir.entryList();
     for (QStringList::Iterator it = list.begin(); it != list.end(); ++it ) {
@@ -636,173 +636,172 @@ void OGenericPluginLoader::installTranslators(const QString& type) {
      * for each language and maybe later for each language dir...
      * try to load a Translator
      */
     for ( QStringList::Iterator it = lst.begin(); it != lst.end(); ++it ) {
         QTranslator* trans = new QTranslator(  qApp );
         QString tfn = QPEApplication::qpeDir()+"/i18n/" + *it + "/lib" + type + ".qm" ;
 
         /*
          * If loaded then install else clean up and don't leak
          */
         if ( trans->load( tfn ) ) 
                     qApp->installTranslator( trans );
         else
             delete trans;
     }
 }
 
 /**
  * \brief Simple c'tor.
  *
  * Simple C'tor same as the one of the base class. Additional this
  * class can cast for you if you nee it.
  *
  *
  * @param name The name of your plugin class
  * @param sorted If plugins are sorted
  *
  * @see OGenericPluginLoader
  */
 OPluginLoader::OPluginLoader( const QString& name,  bool sorted )
     : OGenericPluginLoader( name, sorted )
 {
 }
 
 /**
  * d'tor
  * @see OGenericPluginLoader::~OGenericPluginLoader
  */
 OPluginLoader::~OPluginLoader() {
 }
 
 /**
  * \brief C'Tor using a OGenericPluginLoader
  * The C'tor. Pass your OGenericPluginLoader to manage
  * OGenericPluginLoader::allAvailable plugins.
  *
  *
  * @param loader A Pointer to your OGenericPluginLoader
- * @param name The name
  */
 OPluginManager::OPluginManager(  OGenericPluginLoader* loader)
     : m_loader( loader ), m_isSorted( false )
 {
 }
 
 /**
  * \brief Overloaded c'tor using a List of Plugins and a type name
  * Overloaded Constructor to work with a 'Type' of plugins
  * and a correspending list of those. In this case calling load
  * is a no operation.
  *
  * @param name The name of your plugin ('today','inputmethods','applets')
  * @param lst A List with plugins of your type to manage
  * @param isSorted If the List should be treated sorted
  */
 OPluginManager::OPluginManager( const QString& name, const OPluginItem::List& lst,  bool isSorted)
     : m_loader( 0l ), m_cfgName( name ), m_plugins( lst ), m_isSorted( isSorted )
 {
 }
 
 /**
  * \brief A simple d'tor
  */
 OPluginManager::~OPluginManager() {
 }
 
 /**
  * \brief Return the OPluginItem where loading is likely to have crashed  on.
 
  * Return the Item that made the OGenericPluginLoader crash
  * the returned OPluginItem could be  empty if no crash occured
  * which should apply most of the time. It could also be empty if the crashed
  * plugin is not in the current list of available/managed plugins
  *
  * @see OPluginItem::isEmpty
  * @return OPluginItem that crashed  the loader
  */
 OPluginItem OPluginManager::crashedPlugin()const {
     return m_crashed;
 }
 
 /**
  * \brief Return a list of plugins that are managed by this OPluginManager
  *
  * Return the list of managed plugins. This could either result
  * from passing a OGenericPluginLoader and calling load or by
  * giving name and a list of plugins.
  */
 OPluginItem::List OPluginManager::managedPlugins()const {
     return m_plugins;
 }
 
 /**
  * \brief Set the position of the items
  *
  * Replace the OPluginItem  with the name and path and this way
  * apply the new position. The search is linear and this way O(n/2)
  * You still need to call save()  to make your changes effective. After saving
  * a call to OGenericPluginLoader::filtered() returns the newly configured order and items
  *
  * @param item The  OPluginItem to be replaced internall
  *
  */
 void OPluginManager::setPosition( const OPluginItem& item) {
     replace( item );
 }
 
 /**
  * \brief Enable the item specified as argument
  *
  * This will make sure that OPluginItem::setEnabled is called and then will replace
  * the item with one that matches name and path internally.
  * @see setPosition
  *
- * @param the Item to enable
+ * @param item the Item to enable
  */
 void OPluginManager::enable(  const OPluginItem& item ) {
     setEnabled( item, true );
 }
 
 /**
  * \brief disable the Item.
  *
  * Disable the OPluginItem. Same applies as in
  * @see setPosition and @see enable
  *
  * @param item Item to disable
  */
 void OPluginManager::disable( const OPluginItem& item) {
     setEnabled( item, false );
 }
 
 /**
  * \brief Enable or disable the OPluginItem.
  * Depending on the value of the parameter this will either disable
  * or enable the pluginitem.
  * Beside that same as in @see disable,  @see enable, @see setPosition
  * applies.
  *
  * @param _item The OPluginItem to enable or to disable.
  * @param b Enable or disable the plugin.
  *
  */
 void OPluginManager::setEnabled( const OPluginItem& _item, bool b ) {
     OPluginItem item = _item;
     item.setEnabled( b );
     replace( item );
 }
 
 /**
  * \brief Load necessary information after constructing the object
  * If you speified  a OGenericPluginLoader you need to call this method
  * so that this manager knows what to manage and have a right value for \sa crashedPlugin
  * For the name and the list of plugins this does only try to find out the crashed plugin
  */
 void OPluginManager::load() {
     OConfig cfg( configName() );
     cfg.setGroup(  "General" );
     QString crashedPath = cfg.readEntry( "CrashedPlugin" );
 
     /* if we've a loader this applies if we were called from the first part */
     if ( m_loader )
         m_plugins = m_loader->allAvailable( m_loader->isSorted() );
diff --git a/libopie2/opiecore/oprocess.h b/libopie2/opiecore/oprocess.h
index be1436c..ac6be98 100644
--- a/libopie2/opiecore/oprocess.h
+++ b/libopie2/opiecore/oprocess.h
@@ -9,181 +9,181 @@ _;:,     .>    :=|.         This program is free software; you can
 .> <`_,   >  .   <=         redistribute it and/or  modify it under
 :`=1 )Y*s>-.--   :          the terms of the GNU Library General Public
 .="- .-=="i,     .._        License as published by the Free Software
 - .   .-<_>     .<>         Foundation; either version 2 of the License,
     ._= =}       :          or (at your option) any later version.
    .%`+i>       _;_.
    .i_,=:_.      -<s.       This program is distributed in the hope that
     +  .  -:.       =       it will be useful,  but WITHOUT ANY WARRANTY;
    : ..    .:,     . . .    without even the implied warranty of
    =_        +     =;=|`    MERCHANTABILITY or FITNESS FOR A
  _.=:.       :    :=>`:     PARTICULAR PURPOSE. See the GNU
 ..}^=.=       =       ;     Library General Public License for more
 ++=   -.     .`     .:      details.
 :     =  ...= . :.=-
 -.   .:....=;==+<;          You should have received a copy of the GNU
  -_. . .   )=.  =           Library General Public License along with
    --        :-=`           this library; see the file COPYING.LIB.
                             If not, write to the Free Software Foundation,
                             Inc., 59 Temple Place - Suite 330,
                             Boston, MA 02111-1307, USA.
 */
 
 #ifndef OPROCESS_H
 #define OPROCESS_H
 
 /* QT */
 #include <qcstring.h>
 #include <qobject.h>
 #include <qvaluelist.h>
 
 /* STD */
 #include <sys/types.h> // for pid_t
 #include <sys/wait.h>
 #include <signal.h>
 #include <unistd.h>
 
 class QSocketNotifier;
 
 namespace Opie {
 namespace Core {
 namespace Internal {
 class OProcessController;
 class OProcessPrivate;
 }
 
 /**
  * Child process invocation, monitoring and control.
  *
- * @sect General usage and features
+ * @par General usage and features
  *
  *This class allows a KDE and OPIE application to start child processes without having
  *to worry about UN*X signal handling issues and zombie process reaping.
  *
  *@see KProcIO
  *
  *Basically, this class distinguishes three different ways of running
  *child processes:
  *
  *@li  OProcess::DontCare -- The child process is invoked and both the child
  *process and the parent process continue concurrently.
  *
  *Starting a  DontCare child process means that the application is
  *not interested in any notification to determine whether the
  *child process has already exited or not.
  *
  *@li  OProcess::NotifyOnExit -- The child process is invoked and both the
  *child and the parent process run concurrently.
  *
  *When the child process exits, the OProcess instance
  *corresponding to it emits the Qt signal @ref processExited().
  *
  *Since this signal is @em not emitted from within a UN*X
  *signal handler, arbitrary function calls can be made.
  *
  *Be aware: When the OProcess objects gets destructed, the child
  *process will be killed if it is still running!
  *This means in particular, that you cannot use a OProcess on the stack
  *with OProcess::NotifyOnExit.
  *
  *@li  OProcess::Block -- The child process starts and the parent process
  *is suspended until the child process exits. (@em Really not recommended
  *for programs with a GUI.)
  *
  *OProcess also provides several functions for determining the exit status
  *and the pid of the child process it represents.
  *
  *Furthermore it is possible to supply command-line arguments to the process
  *in a clean fashion (no null -- terminated stringlists and such...)
  *
  *A small usage example:
  *<pre>
  *OProcess *proc = new OProcess;
  *
  **proc << "my_executable";
  **proc << "These" << "are" << "the" << "command" << "line" << "args";
  *QApplication::connect(proc, SIGNAL(processExited(Opie::Core::OProcess *)),
  *                      pointer_to_my_object, SLOT(my_objects_slot(Opie::Core::OProcess *)));
  *proc->start();
  *</pre>
  *
  *This will start "my_executable" with the commandline arguments "These"...
  *
  *When the child process exits, the respective Qt signal will be emitted.
  *
- *@sect Communication with the child process
+ *@par Communication with the child process
  *
  *OProcess supports communication with the child process through
  *stdin/stdout/stderr.
  *
  *The following functions are provided for getting data from the child
  *process or sending data to the child's stdin (For more information,
  *have a look at the documentation of each function):
  *
  *@li bool @ref writeStdin(char  *buffer, int  buflen);
  *@li  -- Transmit data to the child process's stdin.
  *
  *@li bool @ref closeStdin();
  *@li -- Closes the child process's stdin (which causes it to see an  feof(stdin)).
  *Returns false if you try to close stdin for a process that has been started
  *without a communication channel to stdin.
  *
  *@li bool @ref closeStdout();
  *@li -- Closes the child process's stdout.
  *Returns false if you try to close stdout for a process that has been started
  *without a communication channel to stdout.
  *
  *@li bool @ref closeStderr();
  *@li -- Closes the child process's stderr.
  *Returns false if you try to close stderr for a process that has been started
  *without a communication channel to stderr.
  *
  *
- *@sect QT signals:
+ *@par QT signals:
  *
  *@li void @ref receivedStdout(OProcess  *proc, char  *buffer, int  buflen);
  *@li  void @ref receivedStderr(OProcess  *proc, char  *buffer, int  buflen);
  *@li  -- Indicates that new data has arrived from either the
  *child process's stdout or stderr.
  *
  *@li  void @ref wroteStdin(OProcess  *proc);
  *@li  -- Indicates that all data that has been sent to the child process
  *by a prior call to @ref writeStdin() has actually been transmitted to the
  *client .
  *
  *@author Christian Czezakte e9025461@student.tuwien.ac.at
  *@author Holger Freyther (Opie Port)
  *
  **/
 class OProcess : public QObject
 {
     Q_OBJECT
 
 public:
 
     /**
      * Modes in which the communication channel can be opened.
      *
      * If communication for more than one channel is required,
      * the values have to be or'ed together, for example to get
      * communication with stdout as well as with stdin, you would
      * specify @p Stdin @p | @p Stdout
      *
      * If @p NoRead is specified in conjunction with @p Stdout,
      * no data is actually read from @p Stdout but only
      * the signal @ref childOutput(int fd) is emitted.
      */
     enum Communication { NoCommunication = 0, Stdin = 1, Stdout = 2, Stderr = 4,
                          AllOutput = 6, All = 7,
                          NoRead };
 
     /**
      * Run-modes for a child process.
      */
     enum RunMode {
         /**
          * The application does not receive notifications from the subprocess when
          * it is finished or aborted.
          */
         DontCare,
         /**
          * The application is notified when the subprocess dies.
@@ -446,129 +446,131 @@ public:
      * @p quote A flag indicating whether to quote the arguments.
      *
      * When using a shell, the caller should make sure that all filenames etc.
      * are properly quoted when passed as argument.
      * @see quote()
      */
     void setUseShell( bool useShell, const char *shell = 0 );
 
     /**
      * This function can be used to quote an argument string such that
      * the shell processes it properly. This is e. g. necessary for
      * user-provided file names which may contain spaces or quotes.
      * It also prevents expansion of wild cards and environment variables.
      */
     static QString quote( const QString &arg );
 
     /**
      * Detaches OProcess from child process. All communication is closed.
      * No exit notification is emitted any more for the child process.
      * Deleting the OProcess will no longer kill the child process.
      * Note that the current process remains the parent process of the
      * child process.
      */
     void detach();
 
     /**
      * @return the PID of @a process, or -1 if the process is not running
      */
     static int processPID( const QString& process );
 
 signals:
 
     /**
      * Emitted after the process has terminated when
      * the process was run in the @p NotifyOnExit  (==default option to
      * @ref start()) or the @ref Block mode.
      **/
     void processExited( Opie::Core::OProcess *proc );
 
 
     /**
      * Emitted, when output from the child process has
      * been received on stdout.
      *
      *  To actually get
      * these signals, the respective communication link (stdout/stderr)
      * has to be turned on in @ref start().
      *
+     * @param proc The process
      * @param buffer The data received.
      * @param buflen The number of bytes that are available.
      *
      * You should copy the information contained in @p buffer to your private
      * data structures before returning from this slot.
      **/
     void receivedStdout( Opie::Core::OProcess *proc, char *buffer, int buflen );
 
     /**
      * Emitted when output from the child process has
      * been received on stdout.
      *
      * To actually get these signals, the respective communications link
      * (stdout/stderr) has to be turned on in @ref start() and the
      * @p NoRead flag should have been passed.
      *
      * You will need to explicitly call resume() after your call to start()
      * to begin processing data from the child process's stdout.  This is
      * to ensure that this signal is not emitted when no one is connected
      * to it, otherwise this signal will not be emitted.
      *
      * The data still has to be read from file descriptor @p fd.
      **/
     void receivedStdout( int fd, int &len );
 
 
     /**
      * Emitted, when output from the child process has
      * been received on stderr.
      * To actually get
      * these signals, the respective communication link (stdout/stderr)
      * has to be turned on in @ref start().
      *
+     * @param proc The process
      * @param buffer The data received.
      * @param buflen The number of bytes that are available.
      *
      * You should copy the information contained in @p buffer to your private
      * data structures before returning from this slot.
     */
     void receivedStderr( Opie::Core::OProcess *proc, char *buffer, int buflen );
 
     /**
      * Emitted after all the data that has been
      * specified by a prior call to @ref writeStdin() has actually been
      * written to the child process.
      **/
     void wroteStdin( Opie::Core::OProcess *proc );
 
 protected slots:
 
     /**
      * This slot gets activated when data from the child's stdout arrives.
      * It usually calls "childOutput"
      */
     void slotChildOutput( int fdno );
 
     /**
      * This slot gets activated when data from the child's stderr arrives.
      * It usually calls "childError"
      */
     void slotChildError( int fdno );
     /*
     Slot functions for capturing stdout and stderr of the child
     */
 
     /**
      * Called when another bulk of data can be sent to the child's
      * stdin. If there is no more data to be sent to stdin currently
      * available, this function must disable the QSocketNotifier "innot".
      */
     void slotSendData( int dummy );
 
 protected:
 
     /**
      * Sets up the environment according to the data passed via
      * setEnvironment(...)
      */
     void setupEnvironment();
 
     /**
diff --git a/libopie2/opieui/oimageeffect.h b/libopie2/opieui/oimageeffect.h
index 4f86d5b..4422741 100644
--- a/libopie2/opieui/oimageeffect.h
+++ b/libopie2/opieui/oimageeffect.h
@@ -174,186 +174,186 @@ public:
      */
     static QImage& blend(QImage &image1, QImage &image2,
                          QImage &blendImage, RGBComponent channel);
 
     /**
      * Blend an image into another one, using alpha in the expected way.
      * @author Rik Hemsley (rikkus) <rik@kde.org>
      */
     static bool blend(const QImage & upper, const QImage & lower, QImage & output);
 // Not yet...    static bool blend(const QImage & image1, const QImage & image2, QImage & output, const QRect & destRect);
 
     /**
      * Blend an image into another one, using alpha in the expected way and
      * over coordinates @p x and @p y with respect to the lower image.
      * The output is a QImage which is the @p upper image already blended
      * with the @p lower one, so its size will be (in general) the same than
      * @p upper instead of the same size than @p lower like the method above.
      * In fact, the size of @p output is like upper's one only when it can be
      * painted on lower, if there has to be some clipping, output's size will
      * be the clipped area and x and y will be set to the correct up-left corner
      * where the clipped rectangle begins.
      */
     static bool blend(int &x, int &y, const QImage & upper, const QImage & lower, QImage & output);
     /**
      * Blend an image into another one, using alpha in the expected way and
      * over coordinates @p x and @p y with respect to the lower image.
      * The output is painted in the own @p lower image. This is an optimization
      * of the blend method above provided by convenience.
      */
     static bool blendOnLower(int x, int y, const QImage & upper, const QImage & lower);
 
     /**
      * Modifies the intensity of a pixmap's RGB channel component.
      *
      * @author Daniel M. Duley (mosfet)
      * @param image The QImage to process.
      * @param percent Percent value. Use a negative value to dim.
      * @param channel Which channel(s) should be modified
      * @return The @p image, provided for convenience.
      */
     static QImage& channelIntensity(QImage &image, float percent,
                                     RGBComponent channel);
 
     /**
      * Fade an image to a certain background color.
      *
      * The number of colors will not be changed.
      *
-     * @param image The QImage to process.
+     * @param img The QImage to process.
      * @param val The strength of the effect. 0 <= val <= 1.
      * @param color The background color.
      * @return Returns the @ref image(), provided for convenience.
      */
     static QImage& fade(QImage &img, float val, const QColor &color);
 
 
     /**
      * This recolors a pixmap. The most dark color will become color a,
      * the most bright one color b, and in between.
      *
      * @param image A QImage to process.
      * @param ca Color a
      * @param cb Color b
      */
     static QImage& flatten(QImage &image, const QColor &ca,
            const QColor &cb, int ncols=0);
 
     /**
      * Build a hash on any given @ref QImage
      *
      * @param image The QImage to process
      * @param lite The hash faces the indicated lighting (cardinal poles).
      * @param spacing How many unmodified pixels inbetween hashes.
      * @return Returns the @ref image(), provided for convenience.
      */
     static QImage& hash(QImage &image, Lighting lite=NorthLite,
                         unsigned int spacing=0);
 
     /**
      * Either brighten or dim the image by a specified percent.
      * For example, .50 will modify the colors by 50%.
      *
      * @author Daniel M. Duley (mosfet)
      * @param image The QImage to process.
      * @param percent The percent value. Use a negative value to dim.
      * @return Returns The @ref image(), provided for convenience.
      */
     static QImage& intensity(QImage &image, float percent);
 
     /**
      * Modulate the image with a color channel of another image.
      *
      * @param image The QImage to modulate and result.
      * @param modImage The QImage to use for modulation.
      * @param reverse Invert the meaning of image/modImage; result is image!
      * @param type The modulation Type to use.
      * @param factor The modulation amplitude; with 0 no effect [-200;200].
      * @param channel The RBG channel of image2 to use for modulation.
      * @return Returns the @ref image(), provided for convenience.
      */
     static QImage& modulate(QImage &image, QImage &modImage, bool reverse,
                 ModulationType type, int factor, RGBComponent channel);
 
     /**
      * Convert an image to grayscale.
      *
      * @author Daniel M. Duley (mosfet)
      * @param image The @ref QImage to process.
      * @param fast Set to @p true in order to use a faster but non-photographic
      * quality algorithm. Appropriate for things such as toolbar icons.
      * @return Returns the @ref image(), provided for convenience.
      */
     static QImage& toGray(QImage &image, bool fast = false);
 
     /**
      * Desaturate an image evenly.
      *
      * @param image The QImage to process.
      * @param desat A value between 0 and 1 setting the degree of desaturation
      * @return Returns the @ref image(), provided for convenience.
      */
     static QImage& desaturate(QImage &image, float desat = 0.3);
 
     /**
      * Fast, but low quality contrast of an image. Also see contrastHSV.
      *
      * @author Daniel M. Duley (mosfet)
      * @param image The QImage to process.
      * @param c A contrast value between -255 to 255.
      * @return The @ref image(), provided for convenience.
      */
     static QImage& contrast(QImage &image, int c);
 
     /**
      * Dither an image using Floyd-Steinberg dithering for low-color
      * situations.
      *
-     * @param image The QImage to process.
+     * @param img The QImage to process.
      * @param palette The color palette to use
      * @param size The size of the palette
      * @return Returns the @ref image(), provided for convenience.
      */
     static QImage& dither(QImage &img, const QColor *palette, int size);
 
     /**
      * Calculate the image for a selected image, for instance a selected icon
      * on the desktop.
      * @param img the QImage to select
      * @param col the selected color, usually from QColorGroup::highlight().
      */
     static QImage& selectedImage( QImage &img, const QColor &col );
 
     /**
      * High quality, expensive HSV contrast. You can do a faster one by just
      * taking a intensity threshold (ie: 128) and incrementing RGB color
      * channels above it and decrementing those below it, but this gives much
      * better results.
      *
      * @author Daniel M. Duley (mosfet)
      * @param img The QImage to process.
      * @param sharpen If true sharpness is increase, (spiffed). Otherwise
      * it is decreased, (dulled).
      */
     static void contrastHSV(QImage &img, bool sharpen=true);
 
     /**
      * Normalizes the pixel values to span the full range of color values.
      * This is a contrast enhancement technique.
      * @author Daniel M. Duley (mosfet)
      */
     static void normalize(QImage &img);
 
     /**
      * Performs histogram equalization on the reference
      * image.
      * @author Daniel M. Duley (mosfet)
      */
     static void equalize(QImage &img);
 
     /**
      * Thresholds the reference image. You can also threshold images by using
      * ThresholdDither in the various QPixmap/QImage convert methods, but this
      * lets you specify a threshold value.
      *
      * @author Daniel M. Duley (mosfet)
      * @param img The QImage to process.
@@ -485,80 +485,80 @@ public:
      * @author Daniel M. Duley (mosfet)
      * @param src The QImage to process.
      * @param factor The percent weight to give to the center pixel.
      * @return The sharpened image. The original is not changed.
      */
     static QImage sharpen(QImage &src, double factor=30.0);
 
     /**
      * Randomly displaces pixels.
      *
      * @author Daniel M. Duley (mosfet)
      * @param src The QImage to process.
      * @param amount The vicinity for choosing a random pixel to swap.
      * @return The image with pixels displaced. The original is not changed.
      */
     static QImage spread(QImage &src, unsigned int amount=3);
 
     /**
      * Shades the image using a distance light source.
      *
      * @author Daniel M. Duley (mosfet)
      * @param src The QImage to process.
      * @param color_shading If true do color shading, otherwise do grayscale.
      * @param azimuth Determines the light source and direction.
      * @param elevation Determines the light source and direction.
      * @return The shaded image. The original is not changed.
      */
     static QImage shade(QImage &src, bool color_shading=true, double azimuth=30.0,
                         double elevation=30.0);
     /**
      * Swirls the image by a specified amount
      *
      * @author Daniel M. Duley (mosfet)
      * @param src The QImage to process.
      * @param degrees The tightness of the swirl.
      * @param background An RGBA value to use for the background. After the
      * effect some pixels may be "empty". This value is used for those pixels.
      * @return The swirled image. The original is not changed.
      */
      static QImage swirl(QImage &src, double degrees=50.0, unsigned int background =
                          0xFFFFFFFF);
 
      /**
       * Modifies the pixels along a sine wave.
       *
       * @author Daniel M. Duley (mosfet)
       * @param src The QImage to process.
       * @param amplitude The amplitude of the sine wave.
-      * @param wavelength The frequency of the sine wave.
+      * @param frequency The frequency of the sine wave.
       * @return The new image. The original is not changed.
       */
      static QImage wave(QImage &src, double amplitude=25.0, double frequency=150.0,
                         unsigned int background = 0xFFFFFFFF);
 
 private:
 
     /**
      * Helper function to fast calc some altered (lighten, shaded) colors
      *
      */
     static unsigned int lHash(unsigned int c);
     static unsigned int uHash(unsigned int c);
 
     /**
      * Helper function to find the nearest color to the RBG triplet
      */
     static int nearestColor( int r, int g, int b, const QColor *pal, int size );
 
     static void hull(const int x_offset, const int y_offset, const int polarity,
                      const int width, const int height,
                      unsigned int *f, unsigned int *g);
     static unsigned int generateNoise(unsigned int pixel, NoiseType type);
     static unsigned int interpolateColor(QImage *image, double x, double y,
                                          unsigned int background);
 };
 
 }
 }
 
 #endif
diff --git a/libopie2/opieui/opixmapeffect.h b/libopie2/opieui/opixmapeffect.h
index b780f9f..85a1e25 100644
--- a/libopie2/opieui/opixmapeffect.h
+++ b/libopie2/opieui/opixmapeffect.h
@@ -107,106 +107,101 @@ public:
 
     /**
      * Blends the provided pixmap into a background of the indicated color.
      *
      * @param pixmap The pixmap to process.
      * @param initial_intensity this parameter takes values from -1 to 1:
      *              @li If positive, it tells how much to fade the image in its
      *                              less affected spot.
      *              @li If negative, it tells roughly indicates how much of the image
      *                              remains unaffected
      * @param bgnd Indicates the color of the background to blend in.
      * @param eff Lets you choose what kind of blending you like.
      * @param anti_dir Blend in the opposite direction (makes no much sense
      *                  with concentric blending effects).
      * @return Returns the @ref pixmap(), provided for convenience.
      */
     static OPixmap& blend(OPixmap& pixmap, float initial_intensity,
                          const QColor &bgnd, GradientType eff,
                          bool anti_dir=false, int ncols=3);
 
     /**
      * Builds a hash on any given pixmap.
      *
      * @param pixmap The pixmap to process.
      * @param lite The hash faces the indicated lighting (cardinal poles)
      * @param spacing How many unmodified pixels inbetween hashes.
      * @return Returns The @ref pixmap(), provided for convenience.
      */
     static OPixmap& hash(OPixmap& pixmap, Lighting lite=NorthLite,
                         unsigned int spacing=0, int ncols=3);
 
     /**
      * Creates a pattern from a pixmap.
      *
      * The given pixmap is "flattened"
      * between color a to color b.
      *
      * @param pixmap The pixmap to process.
      * @param ca Color a.
      * @param cb Color b.
      * @param ncols The number of colors to use. The image will be
      * dithered to this depth. Pass zero to prevent dithering.
      * @return The @ref pixmap(), provided for convenience.
      */
     static OPixmap pattern(const OPixmap& pixmap, QSize size,
                    const QColor &ca, const QColor &cb, int ncols=8);
 
     /**
-     * Recolors a pixmap.
-     *
-     * The most dark color will become color a,
-     * the most bright one color b, and in between.
+     * Fades a pixmap to a certain color.
      *
      * @param pixmap The pixmap to process.
-     * @param ca Color a.
-     * @param cb Color b.
-     * @param ncols The number of colors to use. Pass zero to prevent
-     * dithering.
+     * @param val The strength of the effect. 0 <= val <= 1.
+     * @param color The color to blend to.
      * @return Returns the @ref pixmap(), provided for convenience.
      */
     static OPixmap& fade(OPixmap& pixmap, double val, const QColor &color);
 
     /**
      * Converts a pixmap to grayscale.
      *
      * @param pixmap The pixmap to process.
      * @param fast Set to @p true in order to use a faster but non-photographic
      * quality algorithm. Appropriate for things such as toolbar icons.
      * @return Returns the @ref pixmap(), provided for convenience.
      */
     static OPixmap& toGray(OPixmap& pixmap, bool fast=false);
 
     /**
      * Desaturates a pixmap.
      *
      * @param pixmap The pixmap to process.
      * @param desat A value between 0 and 1 setting the degree of desaturation
      * @return Returns The @ref pixmap(), provided for convenience.
      */
     static OPixmap& desaturate(OPixmap& pixmap, float desat = 0.3);
 
     /**
      * Modifies the contrast of a pixmap.
      *
      * @param pixmap The pixmap to process.
      * @param c A contrast value between -255 and 255.
      * @return Returns the @ref pixmap(), provided for convenience.
      */
     static OPixmap& contrast(OPixmap& pixmap, int c);
 
     /**
      * Dithers a pixmap using Floyd-Steinberg dithering for low-color
      * situations.
      *
      * @param pixmap The pixmap to process.
      * @param palette The color palette to use.
      * @param size The size of the palette.
      * @return Returns the @ref pixmap(), provided for convenience.
      */
     static OPixmap& dither(OPixmap &pixmap, const QColor *palette, int size);
 
     /**
      * Calculate a 'selected' pixmap, for instance a selected icon
      * on the desktop.
      * @param pixmap the pixmap to select
      * @param col the selected color, usually from QColorGroup::highlight().
diff --git a/libopie2/qt3/opieui/ocombobox.h b/libopie2/qt3/opieui/ocombobox.h
index 4e35b61..3f60f54 100644
--- a/libopie2/qt3/opieui/ocombobox.h
+++ b/libopie2/qt3/opieui/ocombobox.h
@@ -8,141 +8,141 @@
            .>+-=
  _;:,     .>    :=|.         This program is free software; you can
 .> <`_,   >  .   <=          redistribute it and/or  modify it under
 :`=1 )Y*s>-.--   :           the terms of the GNU Library General Public
 .="- .-=="i,     .._         License as published by the Free Software
  - .   .-<_>     .<>         Foundation; either version 2 of the License,
      ._= =}       :          or (at your option) any later version.
     .%`+i>       _;_.
     .i_,=:_.      -<s.       This program is distributed in the hope that
      +  .  -:.       =       it will be useful,  but WITHOUT ANY WARRANTY;
     : ..    .:,     . . .    without even the implied warranty of
     =_        +     =;=|`    MERCHANTABILITY or FITNESS FOR A
   _.=:.       :    :=>`:     PARTICULAR PURPOSE. See the GNU
 ..}^=.=       =       ;      Library General Public License for more
 ++=   -.     .`     .:       details.
  :     =  ...= . :.=-
  -.   .:....=;==+<;          You should have received a copy of the GNU
   -_. . .   )=.  =           Library General Public License along with
     --        :-=`           this library; see the file COPYING.LIB.
                              If not, write to the Free Software Foundation,
                              Inc., 59 Temple Place - Suite 330,
                              Boston, MA 02111-1307, USA.
 
 */
 
 #ifndef OCOMBOBOX_H
 #define OCOMBOBOX_H
 
 /* QT */
 
 #include <qcombobox.h>
 
 /* OPIE */
 
 #include <opie2/olineedit.h>
 #include <opie2/ocompletion.h>
 #include <opie2/ocompletionbase.h>
 
 /* FORWARDS */
 
 class QListBoxItem;
 class QPopupMenu;
 class OCompletionBox;
 typedef QString OURL;
 
 /**
  * A combined button, line-edit and a popup list widget.
  *
- * @sect Detail
+ * @par Detail
  *
  * This widget inherits from @ref QComboBox and implements
  * the following additional functionalities:  a completion
  * object that provides both automatic and manual text
  * completion as well as text rotation features, configurable
  * key-bindings to activate these features, and a popup-menu
  * item that can be used to allow the user to set text completion
  * modes on the fly based on their preference.
  *
  * To support these new features OComboBox also emits a few
  * more additional signals as well.  The main ones are the
  * @ref completion( const QString& ) and @ref textRotation( KeyBindingType )
  * signals.  The completion signal is intended to be connected to a slot
  * that will assist the user in filling out the remaining text while
  * the rotation signals is intended to be used to traverse through all
  * possible matches whenever text completion results in multiple matches.
  * The @ref returnPressed() and @ref returnPressed( const QString& )
  * signal is emitted when the user presses the Enter/Return key.
  *
  * This widget by default creates a completion object when you invoke
  * the @ref completionObject( bool ) member function for the first time
  * or use @ref setCompletionObject( OCompletion*, bool ) to assign your
  * own completion object.  Additionally, to make this widget more functional,
  * OComboBox will by default handle the text rotation and completion
  * events internally whenever a completion object is created through either
  * one of the methods mentioned above.  If you do not need this functionality,
  * simply use @ref OCompletionBase::setHandleSignals( bool ) or alternatively
  * set the boolean parameter in the above methods to FALSE.
  *
  * The default key-bindings for completion and rotation is determined
  * from the global settings in @ref OStdAccel.  These values, however,
  * can be overriden locally by invoking @ref OCompletionBase::setKeyBinding().
  * The values can easily be reverted back to the default setting, by simply
  * calling @ref useGlobalSettings(). An alternate method would be to default
  * individual key-bindings by usning @ref setKeyBinding() with the default
  * second argument.
  *
  * Note that if this widget is not editable ( i.e. select-only ), then only
  * one completion mode, @p CompletionAuto, will work.  All the other modes are
  * simply ignored.  The @p CompletionAuto mode in this case allows you to
  * automatically select an item from the list by trying to match the pressed
  * keycode with the first letter of the enteries in the combo box.
  *
- * @sect Useage
+ * @par Usage
  *
  * To enable the basic completion feature:
  *
  * <pre>
  * OComboBox *combo = new OComboBox( true, this, "mywidget" );
  * OCompletion *comp = combo->completionObject();
  * // Connect to the return pressed signal - optional
  * connect(combo,SIGNAL(returnPressed(const QString&)),comp,SLOT(addItem(const QString&));
  * </pre>
  *
  * To use your own completion object:
  *
  * <pre>
  * OComboBox *combo = new OComboBox( this,"mywidget" );
  * OURLCompletion *comp = new OURLCompletion();
  * combo->setCompletionObject( comp );
  * // Connect to the return pressed signal - optional
  * connect(combo,SIGNAL(returnPressed(const QString&)),comp,SLOT(addItem(const QString&));
  * </pre>
  *
  * Note that you have to either delete the allocated completion object
  * when you don't need it anymore, or call
  * setAutoDeleteCompletionObject( true );
  *
  * Miscellaneous function calls:
  *
  * <pre>
  * // Tell the widget not to handle completion and rotation
  * combo->setHandleSignals( false );
  * // Set your own completion key for manual completions.
  * combo->setKeyBinding( OCompletionBase::TextCompletion, Qt::End );
  * // Hide the context (popup) menu
  * combo->setContextMenuEnabled( false );
  * // Temporarly disable signal emition
  * combo->disableSignals();
  * // Default the all key-bindings to their system-wide settings.
  * combo->useGlobalKeyBindings();
  * </pre>
  *
  * @short An enhanced combo box.
  * @author Dawit Alemayehu <adawit@kde.org>
  */
 class OComboBox : public QComboBox, public OCompletionBase
 {
   Q_OBJECT
 
   //Q_PROPERTY( bool autoCompletion READ autoCompletion WRITE setAutoCompletion )
   //Q_PROPERTY( bool contextMenuEnabled READ isContextMenuEnabled WRITE setContextMenuEnabled )
diff --git a/libopie2/qt3/opieui/olineedit.h b/libopie2/qt3/opieui/olineedit.h
index ecfca27..db3d7ef 100644
--- a/libopie2/qt3/opieui/olineedit.h
+++ b/libopie2/qt3/opieui/olineedit.h
@@ -5,172 +5,172 @@
                              Copyright (C) 1997 Sven Radej (sven.radej@iname.com)
               =.
             .=l.
            .>+-=
  _;:,     .>    :=|.         This program is free software; you can
 .> <`_,   >  .   <=          redistribute it and/or  modify it under
 :`=1 )Y*s>-.--   :           the terms of the GNU Library General Public
 .="- .-=="i,     .._         License as published by the Free Software
  - .   .-<_>     .<>         Foundation; either version 2 of the License,
      ._= =}       :          or (at your option) any later version.
     .%`+i>       _;_.
     .i_,=:_.      -<s.       This program is distributed in the hope that
      +  .  -:.       =       it will be useful,  but WITHOUT ANY WARRANTY;
     : ..    .:,     . . .    without even the implied warranty of
     =_        +     =;=|`    MERCHANTABILITY or FITNESS FOR A
   _.=:.       :    :=>`:     PARTICULAR PURPOSE. See the GNU
 ..}^=.=       =       ;      Library General Public License for more
 ++=   -.     .`     .:       details.
  :     =  ...= . :.=-
  -.   .:....=;==+<;          You should have received a copy of the GNU
   -_. . .   )=.  =           Library General Public License along with
     --        :-=`           this library; see the file COPYING.LIB.
                              If not, write to the Free Software Foundation,
                              Inc., 59 Temple Place - Suite 330,
                              Boston, MA 02111-1307, USA.
 
 */
 
 #ifndef OLINEEDIT_H
 #define OLINEEDIT_H
 
 /* QT */
 
 #include <qlineedit.h>
 
 /* OPIE */
 
 #include <opie2/ocompletion.h>
 #include <opie2/ocompletionbase.h>
 
 class QPopupMenu;
 
 class OCompletionBox;
 typedef QString KURL; //class KURL;
 
 /**
  * An enhanced QLineEdit widget for inputting text.
  *
- * @sect Detail
+ * @par Detail
  *
  * This widget inherits from @ref QLineEdit and implements the following
  * additional functionalities: q completion object that provides both
  * automatic and manual text completion as well as multiple match iteration
  * features, configurable key-bindings to activate these features and a
  * popup-menu item that can be used to allow the user to set text completion
  * modes on the fly based on their preference.
  *
  * To support these new features OLineEdit also emits a few more
  * additional signals.  These are: @ref completion( const QString& ),
  * textRotation( KeyBindingType ), and @ref returnPressed( const QString& ).
  * The completion signal can be connected to a slot that will assist the
  * user in filling out the remaining text.  The text rotation signal is
  * intended to be used to iterate through the list of all possible matches
  * whenever there is more than one match for the entered text.  The
  * @p returnPressed( const QString& ) signals are the same as QLineEdit's
  * except it provides the current text in the widget as its argument whenever
  * appropriate.
  *
  * This widget by default creates a completion object when you invoke
  * the @ref completionObject( bool ) member function for the first time or
  * use @ref setCompletionObject( OCompletion*, bool ) to assign your own
  * completion object.  Additionally, to make this widget more functional,
  * OLineEdit will by default handle the text rotation and completion
  * events internally when a completion object is created through either one
  * of the methods mentioned above.  If you do not need this functionality,
  * simply use @ref OCompletionBase::setHandleSignals( bool ) or set the
  * boolean parameter in the above functions to FALSE.
  *
  * The default key-bindings for completion and rotation is determined
  * from the global settings in @ref OStdAccel.  These values, however,
  * can be overriden locally by invoking @ref OCompletionBase::setKeyBinding().
  * The values can easily be reverted back to the default setting, by simply
  * calling @ref useGlobalSettings(). An alternate method would be to default
  * individual key-bindings by usning @ref setKeyBinding() with the default
  * second argument.
  *
  * NOTE that if the @p EchoMode for this widget is set to something other
  * than @p QLineEdit::Normal, the completion mode will always be defaulted
  * to @ref PGlobalSettings::CompletionNone.  This is done purposefully to guard
  * against protected entries such as passwords being cached in @ref OCompletion's
  * list. Hence, if the @p EchoMode is not @ref QLineEdit::Normal, the completion
  * mode is automatically disabled.
  *
- * @sect Useage
+ * @par Usage
  *
  * To enable the basic completion feature :
  *
  * <pre>
  * OLineEdit *edit = new OLineEdit( this, "mywidget" );
  * OCompletion *comp = edit->completionObject();
  * // Fill the completion object with a list of possible matches
  * QStringList list;
  * list << "mickeyl@handhelds.org" << "mickey@tm.informatik.uni-frankfurt.de>" << "mickey@Vanille.de";
  * comp->setItems( list );
  * // Connect to the return pressed signal (optional)
  * connect(edit,SIGNAL(returnPressed(const QString&)),comp,SLOT(addItem(const QString&));
  * </pre>
  *
  * To use a customized completion objects or your
  * own completion object :
  *
  * <pre>
  * OLineEdit *edit = new OLineEdit( this,"mywidget" );
  * KURLCompletion *comp = new KURLCompletion();
  * edit->setCompletionObject( comp );
  * // Connect to the return pressed signal - optional
  * connect(edit,SIGNAL(returnPressed(const QString&)),comp,SLOT(addItem(const QString&));
  * </pre>
  *
  * Note that you have to either delete the allocated completion object
  * when you don't need it anymore, or call
  * setAutoDeleteCompletionObject( true );
  *
- * @sect Miscellaneous function calls :
+ * @par Miscellaneous function calls :
  *
  * <pre>
  * // Tell the widget not to handle completion and
  * // iteration internally.
  * edit->setHandleSignals( false );
  * // Set your own completion key for manual completions.
  * edit->setKeyBinding( OCompletionBase::TextCompletion, Qt::End );
  * // Hide the context (popup) menu
  * edit->setContextMenuEnabled( false );
  * // Temporarly disable signal emitions
  * // (both completion & iteration signals)
  * edit->disableSignals();
  * // Default the key-bindings to system settings.
  * edit->useGlobalKeyBindings();
  * </pre>
  *
  * @short An enhanced single line input widget.
  * @author Dawit Alemayehu <adawit@kde.org>
  * @author Opie adaption by Michael Lauer <mickey@tm.informatik.uni-frankfurt.de>
  */
 
 class OLineEdit : public QLineEdit, public OCompletionBase
 {
     friend class OComboBox;
 
     Q_OBJECT
     Q_PROPERTY( bool contextMenuEnabled READ isContextMenuEnabled WRITE setContextMenuEnabled )
     Q_PROPERTY( bool urlDropsEnabled READ isURLDropsEnabled WRITE setURLDropsEnabled )
 
 public:
 
     /**
      * Constructs a OLineEdit object with a default text, a parent,
      * and a name.
      *
      * @param string Text to be shown in the edit widget.
      * @param parent The parent object of this widget.
      * @param name the name of this widget
      */
     OLineEdit( const QString &string, QWidget *parent, const char *name = 0 );
 
     /**
      * Constructs a OLineEdit object with a parent and a name.
      *
      * @param string Text to be shown in the edit widget.
      * @param parent The parent object of this widget.
      * @param name The name of this widget.
      */