21 files changed, 0 insertions, 2719 deletions
diff --git a/libopie/big-screen/IDEAS b/libopie/big-screen/IDEAS deleted file mode 100644 index 27a4d6e..0000000 --- a/libopie/big-screen/IDEAS +++ b/dev/null @@ -1,81 +0,0 @@ -Now that PDAs get a VGA resolution and Opie runs on Webpads -and could be used as a Kiosk secure environment the design -decision that were right for a 320x240/240x320 doesn't necessary -to be right for bigger screens. - -Remember most desktops a few years ago had only a resolution -of 800x600. -Then also to remember is that a webpad with 640x480 is different to -a PDA with the same resolution. The PDA has a much smaller -physical display. - -With higher resolution the feeling of a desktop comes. - -Problems with current Opie: - -InputMethod use full width but most of the times are not high enough - This actually makes it harder to input and looks stupid. - -ToolBars only feels strange on bigger screens. Maybe do it like WinCE3 does - share the ToolBar with MenuBar if they're too big for the screen allow handles - to either show the left or right side. Note that the handle from Qt looks - bad and should be patched away - -The Escape/Close back to View does not make sense on bigger screens and desktop - on a desktop you might even want to show multiple views and detach from the 'system' - view - -Modality. Dunnow how you get back to the enter dialog without modality in Qt/E fix it? - On bigger screen this is not the problem you can move windows. But you should try - to be less modal in the future. - I've added a small to qpeapplication to iterate over the toplevel widgets 99% - ( click on the taskbar to iterate over the widgets first time nothing is changed ) - , BUT it should be avoided to use modality showMaximized(), exec() - INSTEAD we will use a modal helper where one can register to show a dialog for uid - type and will get a signal once the settings need to be applied, rejected or discarded. - This way you can almost work like with exec(), do not need to care for freeing. - Problems sometimes to have more than one dialog in memory is expensive. Allow queueing - and reusing this widget ( only set the Record new? ) - -Viewing on bigger screens you may want to have a seperate viewer widget ( topLevel ) which - might also get spon off from the normal operation. The (X) close go back does not make - sense on bigger screens and feels strange - -Sizing and Auto sizing of widgets - -Widgets and Classes - - Toolbar/Action and Popups: - While KParts with XMLGUI provide a fantastic technology to change the GUI - on the fly. Parsing these GUI descriptions is not an option for PDAs - specially not on start up. - Instead we will need to use normal object in this case QAction and QPopupMenuss. We - will then group these Actions into groups. Each group can have children and one - parent. Each group has two attributes one for the menubar and one for the toolbar. - Attributes for each might be | together. Always, Never, Auto are the attributes I - can think of tonite. Always will place this group always there, Never yeah never, - Automatic lets the later described Manager decide. Also one could or MightSpinOff - to a group. This way a child group might get spon off if enough place is there. - You cann add QAction and QPopupMenus to the group the Group will not take owner ship - and you might use your QAction in other places as well. - Toplevel groups need to be registered to the manager and this manager will depending - on global settings place and control MenuBar and ToolBar/ToolBar. - This allows to dynamically create toolbar on the fly - - Modality class: - It'll be a template with a QSignal to tell about changes and a method to get to know - which action to be applied. It has three template parameters one for the WIdget used - and one for the type of uid and the last for the editor widget which - at least needs to provide some methods as well. - If you need to edit an widget you simply tell the helper about it. If present it'll - raise the widget or either queue it or create a new editor depending on a policy - one can set manually or get from the system. - - Viewing: - We will provide a special OWidgetStack which either is a real QWidgetStack or a QList - of toplevel widgets to be raised. One has to see how one can use it with todolist - and datebook. specially the switching back and forth need to be handled but with possible - no code reordering ( least intrusive ) - Viewing II: - Example Advanced FM has a tabwidget but on a SIMpad it would make perfect sense to use a - QSplitter or QVBox. We will provide an OSplitter which either provides the one - or the other widget depending on the size - - -These small changes ( replacing Q with O + bit more) should make Opie a better environment for -bigger screens. The additional library memory is a fair trade off and memory can be recovered -by other technics
\ No newline at end of file diff --git a/libopie/big-screen/big-screen.pro b/libopie/big-screen/big-screen.pro deleted file mode 100644 index f324d3c..0000000 --- a/libopie/big-screen/big-screen.pro +++ b/dev/null @@ -1,2 +0,0 @@ -HEADERS += big-screen/obigscreen_p.h big-screen/osplitter.h big-screen/owidgetstack.h #big-screen/omodalhelper.h -SOURCES += big-screen/osplitter.cpp big-screen/owidgetstack.cpp #big-screen/omodalhelper.cpp diff --git a/libopie/big-screen/example/osplitter_example.cpp b/libopie/big-screen/example/osplitter_example.cpp deleted file mode 100644 index e337379..0000000 --- a/libopie/big-screen/example/osplitter_example.cpp +++ b/dev/null @@ -1,28 +0,0 @@ -#include <qdir.h> -#include <qlayout.h> - -#include "../osplitter.h" - -#include <qpe/qpeapplication.h> -#include <opie/oapplicationfactory.h> - -#include "osplitter_example.h" - -OPIE_EXPORT_APP( OApplicationFactory<OSplitterExample> ) - -OSplitterExample::OSplitterExample( QWidget *w,const char* n,WFlags f ) - : QWidget( w, n, f ){ - QVBoxLayout * lay = new QVBoxLayout(this); - OSplitter * splitter = new OSplitter( Horizontal, this ); - lay->addWidget( splitter ); - - OFileSelector *selector = new OFileSelector( splitter, OFileSelector::FileSelector, - OFileSelector::Normal, QDir::homeDirPath(), - QString::null ); - splitter->addWidget( selector, "zoom", tr("Selector 1") ); - - selector = new OFileSelector( splitter, OFileSelector::FileSelector, OFileSelector::Normal, - QDir::homeDirPath(), QString::null ); - splitter->addWidget( selector, "zoom", tr("Selector 2") ); - -} diff --git a/libopie/big-screen/example/osplitter_example.h b/libopie/big-screen/example/osplitter_example.h deleted file mode 100644 index ae8f120..0000000 --- a/libopie/big-screen/example/osplitter_example.h +++ b/dev/null @@ -1,20 +0,0 @@ -/* - * May be used, copied and modified wihtout any limitation - */ - -#ifndef OSPlitter_EXAMPLE_H -#define OSPlitter_EXAMPLE_H - -#include <qvbox.h> -#include <opie/ofileselector.h> - -class OSplitterExample : public QWidget { - Q_OBJECT -public: - static QString appName() { return QString::fromLatin1("osplitter_example"); } - OSplitterExample( QWidget *parent, const char* name, WFlags fl ); - -}; - - -#endif diff --git a/libopie/big-screen/example/osplitter_example.o b/libopie/big-screen/example/osplitter_example.o Binary files differdeleted file mode 100644 index e52d5d9..0000000 --- a/libopie/big-screen/example/osplitter_example.o +++ b/dev/null diff --git a/libopie/big-screen/example/osplitter_example.pro b/libopie/big-screen/example/osplitter_example.pro deleted file mode 100644 index b12bf17..0000000 --- a/libopie/big-screen/example/osplitter_example.pro +++ b/dev/null @@ -1,13 +0,0 @@ -CONFIG = qt warn_on -TEMPLATE = app -TARGET = osplitter_example - -HEADERS = osplitter_example.h ../osplitter.h -SOURCES = osplitter_example.cpp ../osplitter.cpp - -INCLUDEPATH += $(OPIEDIR)/include ../ -DEPENDSPATH += $(OPIEDIR)/include - -LIBS += -lqpe -lopie - -include ( $(OPIEDIR)/include.pro )
\ No newline at end of file diff --git a/libopie/big-screen/example/osplitter_mail.cpp b/libopie/big-screen/example/osplitter_mail.cpp deleted file mode 100644 index 4356baa..0000000 --- a/libopie/big-screen/example/osplitter_mail.cpp +++ b/dev/null @@ -1,82 +0,0 @@ - -#include <qstring.h> -#include <qlabel.h> -#include <qheader.h> -#include <qlayout.h> - -#include <qpe/qpeapplication.h> -#include <opie/oapplicationfactory.h> - -#include "../osplitter.h" - -#include "osplitter_mail.h" - - -OPIE_EXPORT_APP( OApplicationFactory<ListViews> ) - -class Folder { - int dummy; -}; - -// ----------------------------------------------------------------- - -ListViews::ListViews( QWidget* p, const char* name, WFlags fl ) - : QWidget( p, name, fl ) { - qApp->installEventFilter( this ); - m_lstFolders.setAutoDelete( true ); - QHBoxLayout *lay = new QHBoxLayout(this); - - m_splitter = new OSplitter( Horizontal, this, "SPlitter 1" ); - lay->addWidget( m_splitter ); - connect(m_splitter, SIGNAL(sizeChange(bool,const QSize&) ), - this, SLOT(slotSizeChange(bool,const QSize&) ) ); - - m_overview = new QListView( m_splitter ); - m_overview->header()->setClickEnabled( FALSE ); - m_overview->addColumn( tr("Folder") ); - m_overview->setMaximumWidth( 200 ); - m_splitter->addWidget( m_overview, "zoom", tr("Folder Overview") ); - m_splitter->setSizeChange( 300 ); - - /* OSplitter starts with the small mode */ - m_messages = 0; - m_message = m_attach = 0; - - splitti = new OSplitter( Vertical, m_splitter, "Splitti2" ); - splitti->setSizeChange( 300 ); - splitti->setSizePolicy( QSizePolicy(QSizePolicy::MinimumExpanding, QSizePolicy::MinimumExpanding ) ); - - QLabel *lbl = new QLabel(splitti); - lbl->setTextFormat ( Qt::RichText ); - lbl->setText("<br><br><b>Test Test Test</b><br><br><p>Fooooo hjhh</p>"); - - m_messages = new QListView( splitti ); - m_messages->addColumn(" Messages "); - - folder1 = new QListView( splitti ); - folder1->addColumn( "Messages 2 " ); - - splitti->addWidget(m_messages, "mail", tr("Mails") ); - splitti->addWidget(folder1, "folder", tr("Folder") ); - splitti->addWidget( lbl, "logo", tr("Label") ); - m_message = lbl; - - m_splitter->addWidget( splitti ); - -} - - -ListViews::~ListViews() { - -} - - -bool ListViews::eventFilter( QObject* obj, QEvent* ev ) { - if (!obj->isWidgetType() ) - return false; - if ( ev->type() == QEvent::MouseButtonRelease ) { - qWarning(" name %s, class %s", obj->name(), obj->className() ); - } - - return false; -} diff --git a/libopie/big-screen/example/osplitter_mail.h b/libopie/big-screen/example/osplitter_mail.h deleted file mode 100644 index b7e7efe..0000000 --- a/libopie/big-screen/example/osplitter_mail.h +++ b/dev/null @@ -1,49 +0,0 @@ -/* - * You may use, modify and distribute this code without any limitation - */ - -/* - * Header file for a more complete email client like - * layout - */ - -#ifndef OPIE_SPLITTER_MAIL_EXAMPLE_H -#define OPIE_SPLITTER_MAIL_EXAMPLE_H - -#include <qwidget.h> -#include <qlist.h> -#include <qlistview.h> - -class Folder; -class QLabel; - -class OSplitter; -class ListViews : public QWidget { - Q_OBJECT -public: - static QString appName() { return QString::fromLatin1("osplitter-mail"); } - ListViews( QWidget* parent, const char * name, WFlags fl ); - ~ListViews(); - - bool eventFilter( QObject* , QEvent* ); -private: - void initFolders(); - void initFolder( Folder *folder, unsigned int &count ); - - QListView *m_messages, *m_overview; - QLabel *m_message, *m_attach; - QList<QListView> m_folders; // used in tab mode - QList<Folder> m_lstFolders; - bool m_mode : 1; // bitfield - OSplitter *m_splitter; - OSplitter *splitti; - QListView *folder1; -#if 0 -//private slots: -// void slotFolderChanged( QListViewItem* ); -// void slotMessageChanged(); -// void slotSizeChange( bool, const QSize& ); -#endif -}; - -#endif diff --git a/libopie/big-screen/example/osplitter_mail.pro b/libopie/big-screen/example/osplitter_mail.pro deleted file mode 100644 index ec6e626..0000000 --- a/libopie/big-screen/example/osplitter_mail.pro +++ b/dev/null @@ -1,12 +0,0 @@ -CONFIG += qt warn_on -TEMPLATE = app -TARGET = osplitter-mail - -INCLUDEPATH += $(OPIEDIR)/include -DEPENDSPATH += $(OPIEDIR)/include - -HEADERS = osplitter_mail.h -SOURCES = osplitter_mail.cpp - -LIBS += -lqpe -lopie -include ( $(OPIEDIR)/include.pro ) diff --git a/libopie/big-screen/example/owidgetstack_example.cpp b/libopie/big-screen/example/owidgetstack_example.cpp deleted file mode 100644 index a6b8201..0000000 --- a/libopie/big-screen/example/owidgetstack_example.cpp +++ b/dev/null @@ -1,131 +0,0 @@ -/* - * You may use, modify and distribute this example without any limitation - */ - -#include <qaction.h> -#include <qtoolbar.h> -#include <qpopupmenu.h> -#include <qmenubar.h> -#include <qlayout.h> -#include <qlabel.h> -#include <qpushbutton.h> -#include <qsignalmapper.h> - -#include <qpe/resource.h> - -#include "../owidgetstack.h" - -#include "owidgetstack_example.h" - -#include <qpe/qpeapplication.h> -#include <opie/oapplicationfactory.h> - -OPIE_EXPORT_APP( OApplicationFactory<StackExample> ) - -StackExample::StackExample( QWidget* parent, const char* name, WFlags fl ) - : QMainWindow( parent, name, fl ) -{ - m_stack = new OWidgetStack( this ); - setCentralWidget( m_stack ); - - /* nice Signal Mapper ;) */ - QSignalMapper *sm = new QSignalMapper(this); - connect(sm, SIGNAL(mapped(int) ), m_stack, SLOT(raiseWidget(int)) ); - - /* toolbar first but this should be known from the other examples */ - setToolBarsMovable( false ); - - /* only a menubar here */ - QToolBar* holder = new QToolBar( this ); - holder->setHorizontalStretchable( true ); - - QMenuBar *bar = new QMenuBar( holder ); - QPopupMenu *menu = new QPopupMenu( this ); - - QAction* a = new QAction( tr("Show MainWidget"), Resource::loadPixmap("zoom"), - QString::null, 0, this, 0 ); - sm->setMapping(a, 1 ); - connect(a, SIGNAL(activated() ), - sm, SLOT(map() ) ); - a->addTo( menu ); - - a = new QAction( tr("Show Details Small"), Resource::loadPixmap("zoom"), - QString::null, 0, this, 0 ); - sm->setMapping(a, 2 ); - connect(a, SIGNAL(activated() ), - sm, SLOT(map() ) ); - a->addTo( menu ); - - a = new QAction( tr("Show Details More"), Resource::loadPixmap("zoom"), - QString::null, 0, this, 0 ); - sm->setMapping(a, 3 ); - connect(a, SIGNAL(activated() ), - sm, SLOT(map() ) ); - a->addTo( menu ); - - a = new QAction( tr("Show Details All"), Resource::loadPixmap("zoom"), - QString::null, 0, this, 0 ); - sm->setMapping(a, 4 ); - connect(a, SIGNAL(activated() ), - sm, SLOT(map() ) ); - - bar->insertItem( tr("Actions"), menu ); - - /* now the gui */ - - /* first widget, main widget */ - QWidget * wid = new QWidget( m_stack ); - QGridLayout *grid = new QGridLayout(wid, 2, 2 ); - - QPushButton *btn = new QPushButton( tr("Show Details Small"), wid, "details1" ); - sm->setMapping(btn, 2 ); - connect(btn, SIGNAL(clicked()), sm, SLOT(map() ) ); - grid->addWidget( btn, 0, 0 ); - - btn = new QPushButton( tr("Show Details Medium"), wid, "details2"); - sm->setMapping(btn, 3 ); - connect(btn, SIGNAL(clicked()), sm, SLOT(map() ) ); - grid->addWidget( btn, 0, 1 ); - - btn = new QPushButton( tr("Show Details All"), wid, "details3"); - sm->setMapping(btn, 4 ); - connect(btn, SIGNAL(clicked()), sm, SLOT(map() ) ); - grid->addWidget( btn, 1, 1 ); - - m_stack->addWidget( wid, 1 ); - m_main = wid; - - QLabel *lbl = new QLabel(m_stack ); - lbl->setText(tr("Only small Details are shown here. Määh") ); - m_stack->addWidget( lbl, 2 ); - - lbl = new QLabel( m_stack ); - lbl->setText( tr("Some more details....Wo ist das Schaf?") ); - m_stack->addWidget( lbl, 3 ); - - lbl = new QLabel( m_stack ); - lbl->setText( tr("<qt>Ne nicht in Bayerisch Gmain sondern in Berlin<br>Vermiss und meine Augen werden nicht eckig, da mein Bildschirm abgerundet ist<br>Es lebe Hamburg Süd,weiss du, verstehst du? ;)<br>Susi ist dOOf, es lebe die Ofenecke...", "hard to translate that") ); - m_stack->addWidget( lbl, 4 ); - - - /* THE signal mapper does all the magic */ - m_stack->raiseWidget( m_main ); -} - - -StackExample::~StackExample() { - -} - - - -void StackExample::closeEvent( QCloseEvent* ev) { - /* if the close even came when we displayed a details */ - if (m_stack->visibleWidget() != m_main ) { - m_stack->raiseWidget( m_main ); - ev->ignore(); - return; - } - - ev->accept(); -} diff --git a/libopie/big-screen/example/owidgetstack_example.h b/libopie/big-screen/example/owidgetstack_example.h deleted file mode 100644 index 7977b48..0000000 --- a/libopie/big-screen/example/owidgetstack_example.h +++ b/dev/null @@ -1,27 +0,0 @@ -/* - * You may use, modify and distribute this example without any limitation - */ - -#ifndef O_STACK_EXAMPLE_SIMPLE_H -#define O_STACK_EXAMPLE_SIMPLE_H - -#include <qmainwindow.h> - - -class OWidgetStack; -class StackExample : public QMainWindow { - Q_OBJECT -public: - StackExample( QWidget* paren, const char* name, WFlags fl ); - ~StackExample(); - static QString appName() { return QString::fromLatin1("owidgetstack-example"); } - -protected: - void closeEvent( QCloseEvent* e ); -private: - OWidgetStack* m_stack; - QWidget* m_main; - -}; - -#endif diff --git a/libopie/big-screen/example/owidgetstack_example.pro b/libopie/big-screen/example/owidgetstack_example.pro deleted file mode 100644 index ad1dc09..0000000 --- a/libopie/big-screen/example/owidgetstack_example.pro +++ b/dev/null @@ -1,13 +0,0 @@ -CONFIG += qt warn_on -TEMPLATE = app -TARGET = owidgetstack-example - -SOURCES = ../owidgetstack.cpp owidgetstack_example.cpp -HEADERS = ../owidgetstack.h owidgetstack_example.h - -INCLUDEPATH += $(OPIEDIR)/include -DEPENDSPATH += $(OPIEDIR)/include - -LIBS += -lqpe - -include ( $(OPIEDIR)/include.pro ) diff --git a/libopie/big-screen/obarcollection.h b/libopie/big-screen/obarcollection.h deleted file mode 100644 index 5822360..0000000 --- a/libopie/big-screen/obarcollection.h +++ b/dev/null @@ -1,107 +0,0 @@ -/* - =. This file is part of the OPIE Project - .=l. Copyright (c) 2003 hOlgAr <zecke@handhelds.org> - .>+-= - _;:, .> :=|. This library is free software; you can -.> <`_, > . <= redistribute it and/or modify it under -:`=1 )Y*s>-.-- : the terms of the GNU Library General Public -.="- .-=="i, .._ License as published by the Free Software - - . .-<_> .<> Foundation; either version 2 of the License, - ._= =} : or (at your option) any later version. - .%`+i> _;_. - .i_,=:_. -<s. This library is distributed in the hope that - + . -:. = it will be useful, but WITHOUT ANY WARRANTY; - : .. .:, . . . without even the implied warranty of - =_ + =;=|` MERCHANTABILITY or FITNESS FOR A - _.=:. : :=>`: PARTICULAR PURPOSE. See the GNU -..}^=.= = ; Library General Public License for more -++= -. .` .: details. - : = ...= . :.=- - -. .:....=;==+<; You should have received a copy of the GNU - -_. . . )=. = Library General Public License along with - -- :-=` this library; see the file COPYING.LIB. - If not, write to the Free Software Foundation, - Inc., 59 Temple Place - Suite 330, - Boston, MA 02111-1307, USA. - -*/ - -#ifndef HAZE_OBAR_EXTENSION -#define HAZE_OBAR_EXTENSION - -#include <qstring.h> -#include <qwidget.h> - -class QAction; -class QPopupMenu; - -/* - * ### TODO - * -Consider Life Updates - * -Make ValueBased like Opie-featurelist - */ - -/** - * The different screen sizes have different look and feel. On bigger - * screens only a QToolBar feels strange. One is at least known to have - * a Help-Menu, a File Menu with Quit/Exit but instead of providing two - * different ways / two action sets we will group actions to gether and give - * them attributes when and where we might want them to be visible. - * We can also group actions. For example you could Group All Actions - * into the File Group. This means with many actions you would only have more toolbar - * actions but many sub menus in File. On bigger screen this would automatically - * expand to a full blown MenuBar and ToolButtons. - * - * @short Grouping of actions for dynamic Bar Generation - * @version 0.01 - * @author hOlgAr - */ -class OBarGroup { -public: - enum Preference { Allways, Never, IfPlace }; - OBarGroup( const QString& name, enum Preference groupPreference ); - ~OBarGroup(); - - void add( QAction* action, enum Preference menuPreference, - enum Preference toolpreference ); - void add( const QString&, QPopupMenu* ); - - void add( OBarGroup* ); - - void remove( QAction* action ); - void remove( QMap* ); - -protected: - OBarGroup* parent()const; - -private: -}; - - -/** - * Add your groups in order to the bar manager - * and either call createGUI() on it, or tell it - * it the mainwindow and it is listening to the show event - * and then creates the toolbar - */ -class OBarManager : public QObject{ -public: - OBarManager( QWindow* parent ); - ~OBarManager(); - - void add( OBarGroup*, int pos = -1 ); - void remove( OBarGroup* ); - - bool eventFilter( QObject* , QEvent* ); - -public slots: - void createGUI(); -}; - -/* - * ### TODO GUI merging - */ - -#endif - - diff --git a/libopie/big-screen/obigscreen_p.h b/libopie/big-screen/obigscreen_p.h deleted file mode 100644 index ed256d9..0000000 --- a/libopie/big-screen/obigscreen_p.h +++ b/dev/null @@ -1,20 +0,0 @@ -#ifndef OPIE_BIG_SCREEN_PRIVATE -#define OPIE_BIG_SCREEN_PRIVATE - -namespace Opie { - -struct OSplitterContainer { - bool operator==( const OSplitterContainer& o)const { - if (widget != o.widget ) return false; - if (icon != o.icon ) return false; - if (name != o.name ) return false; - return true; - } - QWidget* widget; - QString icon; - QString name; -}; - -} - -#endif diff --git a/libopie/big-screen/omodalhelper.cpp b/libopie/big-screen/omodalhelper.cpp deleted file mode 100644 index c5a47b3..0000000 --- a/libopie/big-screen/omodalhelper.cpp +++ b/dev/null @@ -1,165 +0,0 @@ -/* - =. This file is part of the OPIE Project - .=l. Copyright (c) 2003 hOlgAr <zecke@handhelds.org> - .>+-= - _;:, .> :=|. This library is free software; you can -.> <`_, > . <= redistribute it and/or modify it under -:`=1 )Y*s>-.-- : the terms of the GNU Library General Public -.="- .-=="i, .._ License as published by the Free Software - - . .-<_> .<> Foundation; either version 2 of the License, - ._= =} : or (at your option) any later version. - .%`+i> _;_. - .i_,=:_. -<s. This library is distributed in the hope that - + . -:. = it will be useful, but WITHOUT ANY WARRANTY; - : .. .:, . . . without even the implied warranty of - =_ + =;=|` MERCHANTABILITY or FITNESS FOR A - _.=:. : :=>`: PARTICULAR PURPOSE. See the GNU -..}^=.= = ; Library General Public License for more -++= -. .` .: details. - : = ...= . :.=- - -. .:....=;==+<; You should have received a copy of the GNU - -_. . . )=. = Library General Public License along with - -- :-=` this library; see the file COPYING.LIB. - If not, write to the Free Software Foundation, - Inc., 59 Temple Place - Suite 330, - Boston, MA 02111-1307, USA. - -*/ - -#include <qpushbutton.h> -#include <qvbox.h> -#include <qlayout.h> -#include <qlabel.h> - -#include "omodalhelper.h" - - -/* SIgnal handling */ -OModalHelperSignal::OModalHelperSignal( OModalHelperBase* base, QObject* parent ) - : QObject( parent, "OModal Helper Signal" ), m_base( base ) { -} - -OModalHelperSignal::~OModalHelperSignal() { - /* special the ancestor deletes its creator */ - delete m_base; -} - - -/* Helper Controler */ -/* - * the dialogs signal will be slotted here - * and we will call into m_base - */ -OModalHelperControler::OModalHelperControler( OModalHelperBase* base, QObject* parent ) - : QObject(parent, "OModal Helper Controler" ), m_base( base ), m_dia( 0 ), m_id( -1 ) -{ -} - -TransactionID OModalHelperControler::transactionID()const { - return m_id; -} - -void OModalHelperControler::setTransactionID( TransactionID id ) { - m_dia = 0; - m_id = id; -} - -QDialog* OModalHelperControler::dialog()const { - return m_dia; -} - -/* - * If we're in the New mode we will map the QDialog - * to the TransactionID - */ -void OModalHelperControler::done( int result ) { - if ( sender() && !sender()->isA("OModalQueuedDialog") ) - m_dia = static_cast<QDialog*>( sender() ); - - m_base->done( result, m_id ); -} - -void OModalHelperControler::next() { - m_base->next( m_id ); -} - -void OModalHelperControler::prev() { - m_base->prev( m_id ); -} - -/* The Queued Dialog inclusive QueuedBar */ -struct OModalQueueBar : public QHBox { - QPushButton* next; - QPushButton* prev; - QLabel * label; - - OModalQueueBar( QWidget* parent ); - void setText( const QString& str ); -}; - -OModalQueueBar::OModalQueueBar( QWidget* parent ) - : QWidget( parent, "OModal Queue Bar" ) { - prev = new QPushButton( this ); - prev->setText( OModalQueuedDialog::tr("Prev") ); - - label = new QLabel(this); - - next = new QPushButton( this ); - next->setText( OModalQueuedDialog::tr("Next") ); -} - -void OModalQueueBar::setText( const QString& str ) { - label->setText( str ); -} - - -OModalQueuedDialog::OModalQueuedDialog( QDialog* mainWidget ) - : QDialog(0, "OModal Queued Dialog" ) -{ - QVBoxLayout *lay = new QVBoxLayout( this ); - - m_bar = new OModalQueueBar( this ); - lay->addWidget( m_bar ); - - m_center = mainWidget; - m_center->reparent(this, 0, QPoint(0, 0) ); - lay->addWidget( m_center ); - - - connect(m_bar->next, SIGNAL(clicked() ), this, - SIGNAL(next() ) ); - connect(m_bar->prev, SIGNAL(clicked() ), this, - SIGNAL(prev() ) ); - -} - -OModalQueuedDialog::~OModalQueuedDialog() { -} - -QDialog* OModalQueuedDialog::centerDialog()const { - return m_center; -} - -void OModalQueuedDialog::setQueueBarEnabled( bool b) { - /* in Qt3 use setEnabled( bool ) */ - if (b) - m_bar->show(); - else - m_bar->hide(); -} - -void OModalQueuedDialog::setRecord( int record, int count ) { - if (!record && !count ) { - hide(); - return; - }else - show(); - - if ( count > 1 ) - m_bar->show(); - else - m_bar->hide(); - - m_bar->setText( tr("Editing record %1 out of %2", - "Shows the current edited record out of an array of records").arg( record ). arg( count ) ); -} diff --git a/libopie/big-screen/omodalhelper.h b/libopie/big-screen/omodalhelper.h deleted file mode 100644 index 78a2ac9..0000000 --- a/libopie/big-screen/omodalhelper.h +++ b/dev/null @@ -1,708 +0,0 @@ -/* - =. This file is part of the OPIE Project - .=l. Copyright (c) 2003 hOlgAr <zecke@handhelds.org> - .>+-= - _;:, .> :=|. This library is free software; you can -.> <`_, > . <= redistribute it and/or modify it under -:`=1 )Y*s>-.-- : the terms of the GNU Library General Public -.="- .-=="i, .._ License as published by the Free Software - - . .-<_> .<> Foundation; either version 2 of the License, - ._= =} : or (at your option) any later version. - .%`+i> _;_. - .i_,=:_. -<s. This library is distributed in the hope that - + . -:. = it will be useful, but WITHOUT ANY WARRANTY; - : .. .:, . . . without even the implied warranty of - =_ + =;=|` MERCHANTABILITY or FITNESS FOR A - _.=:. : :=>`: PARTICULAR PURPOSE. See the GNU -..}^=.= = ; Library General Public License for more -++= -. .` .: details. - : = ...= . :.=- - -. .:....=;==+<; You should have received a copy of the GNU - -_. . . )=. = Library General Public License along with - -- :-=` this library; see the file COPYING.LIB. - If not, write to the Free Software Foundation, - Inc., 59 Temple Place - Suite 330, - Boston, MA 02111-1307, USA. - -*/ - -#ifndef HAZE_OMODAL_HELPER_H -#define HAZE_OMODAL_HELPER_H - -#include <qdialog.h> -#include <qwidget.h> -#include <qvaluelist.h> -#include <qmap.h> -#include <qvariant.h> - -typedef int TransactionID; - -class OModalHelperControler; -class OModalHelperSignal; -class QDialog; - -struct OModalHelperBase { - virtual void done( int status, TransactionID ) = 0; - virtual void next( TransactionID ) = 0; - virtual void prev( TransactionID ) = 0; -}; - -/** - * Modality sucks! ;) But it is easy to work with - * do exec() on a dialog and you know everything is funky. - * You only need to have one Dialog loaded and so on. - * This class helps you to work like with modality and help - * you to keep things in sync - * It's a template class but it sends signals once one Item is ready - * the signals contains the status and id of the item and then you - * need fetch it. - * Handled Records will stay available until the first call to retrieve - * either the record via the TransactionID or via the QValueList<Record>. Note - * that most functions do not take handled records into account. - * Also if you edit an record external you can tell this class and it'll - * call the merge() function of your widget to maybe merge in these changes. - * It also supports multiple modes. Either it can create new dialogs - * for each item or it can queue them depending on your usage. But it is - * so smart that if only one item is shown that the queue bar is not shown - * See the example for simple usage. - * - * @short helps to life without modaility - * @author hOlgAr - * @version 0.01 - */ -template<class Dialog, class Record, typename Id = int> -class OModalHelper : private OModalHelperBase{ - friend class OModalHelperSignal; - friend class OModalHelperControler; -public: - typedef QValueList<Record> RecordList; - typedef QMap<Id, Record> IdMap; - typedef QMap<TransactionID, Id> TransactionMap; - typedef QMap<QDialog*, TransactionID> DialogMap - enum Mode { Queue, New }; - OModalHelper(enum Mode mode, QObject* parnet ); - - bool handles( Id id)const; - TransactionID transactionID( Id id)const; - - void suspend( bool = true ); - - void cancel(); - void cancel( TransactionID ); - - void connectDone( QObject* rec, const char* slot ); - void connectAccepted( QObject* rec, const char* slot ); - void connectRejected( QObject* rec, const char* slot ); - - TransactionID handle( Id id, const Record& rec = Record() ); - - void edited( Id, int what, const QVariant& data ); - - Record record( TransactionID )const; - RecordList recordsDone()const; -private: - virtual void done( int, TransactionID ); - virtual void next( TransactionID ); - virtual void prev( TransactionID ); - - Record nextRecord( TransactionID &, int & )const; - Record prevRecord( TransactionID &, int & )const; - int pos( TransactionID )const; - Dialog* newDialogRecord( const Record& ); - -private: - OModalHelperDialog *queuedDialog()const; // generate or recycle - OModalHelperDialog *m_dialog; - OModalHelperSignal *m_signal; // our signal - OModalHelperControler *m_controler; - IdMap m_ids; // maps ids (uids) to a record - IdMap m_doneIds; - TransactionMap m_transactions; // activate transactions - TransactionMap m_done; // done and waiting for getting picked - DialogMap m_editing; // only used for New Mode - enum Mode m_mode; // the mode we're in - bool m_disabled :1; -}; - - - -/* ### FIXME use namespace with Qt3 */ - -/* - * A note on flow. The Signal is used for QT Signals when - * a record is done. - * There is either one controler and this controler slot will - * be connected to a dialog signal. - * In Queue we get the next and prev signals and call the Helper. - * this then changes the Record of the dialog and sets the transactionId - * of the controler. - * For the new mode - * - */ - -class OModalHelperSignal : public QObject { - Q_OBJECT -public: - OModalHelperSignal(OModalHelperBase* base, QObject* parent); - ~OModalHelperSignal(); - -signals: - done( int status, TransactionID transaction ); - accepted( TransactionID transaction ); - rejected( TransactionID transaction ); - -private: - OModalHelperBase* m_base; -}; - - -class OModalHelperControler : public QObject { - Q_OBJECT -public: - OModalHelperControler( OModalHelperBase* , QObject* parent); - virtual TransactionID transactionID()const; - void setTransactionID( TransactionID id ); - QDialog* dialog()const; - -public slots: - virtual void done(int result ); - virtual void next(); - virtual void prev(); -private: - QDialog *m_dia; - TransactionID m_id; - OModalHelperBase *m_base; -} - -struct OModalQueueBar; -class OModalQueuedDialog : public QDialog { - Q_OBJECT -public: - OModalQueuedDialog(QDialog *mainWidget); - ~OModalQueuedDialog(); - - QDialog* centerDialog()const; - - void setQueueBarEnabled( bool = true ); - void setRecord( int record, int count ); - -signals: - void next(); - void prev(); - -private: - OModalQueueBar *m_bar; - QDialog *m_center; -}; - - -/* - * Tcpp Template Implementation - */ - -/** - * This is the simple Template c'tor. It takes the mode - * this helper should operate in and the parent object. - * This helper will be deleted when the parent gets deleted - * or you delete it yourself. - * - * @param mode The mode this dialog should be in - * @param parent The parent QObject of this helper. - */ -template<class Dialog, class Record, typename Id> -OModalHelper<Dialog, Record, Id>::OModalHelper( enum Mode mode, QObject* parent ) { - m_disabled = false; - m_mode = mode; - m_signal = new OModalHelperSignal( this, parent ); - m_controler = new OModalHelperControler( this, m_signal ); -} - - -/** - * This functions looks for your record and sees if it is - * handled with this helper. Note that done records - * will not be returned. - * - * @return true if the record is currenlty edited otherwise false - * - * @param Id The id which might be handled - */ -template<class Dialog, class Record, typename Id> -bool OModalHelper<Dialog, Record, Id>::handles( Id id )const { - if ( m_transactions.isEmpty() ) - return false; - - TransactionMap::ConstIterator it = m_transactions.begin(); - for ( ; it != m_transactions.end(); ++it ) - if ( it.data() == id ) - return true; - - return false; -} - - -/** - * just like handles( Id ) but returns the TransactionId - */ -template<class Dialog, class Record, typename Id> -TransactionID OModalHelper<Dialog, Record, Id>::transactionID( Id id)const { - if ( m_transactions.isEmpty() || !m_ids.contains( id ) ) - return 0; - - TransactionMap::ConstIterator it = m_transactions.begin(); - for ( ; it != m_transactions.end(); ++it ) - if ( it.data() == id ) - return it.key(); - - return 0; -} - -/** - * If you're requested to flush your data and you do not want - * to call cancel with this method you can disable and enabled - * all dialogs. - * The state gets saved so if you want to handle a new record the dialog - * will be disabled as well. - * - * @param sus If true setDisabled(TRUE) will be called otherwise FALSE - */ -template<class Dialog, class Record, typename Id> -void OModalHelper<Dialog, Record, Id>::suspend(bool sus) { - m_disabled = sus; - if (m_mode == New ) - for (DialogMap::Iterator it = m_editing.begin(); it != m_editing.end(); ++it ) - it.key()->setDisabled( sus ); - else if (m_dialog ) - queuedDialog()->setDisabled( sus ); -} - -/** - * Cancel will cancel all current operations and clear the list - * of done operations as well. - * This also clears all done operations you did not popped - */ -template<class Dialog, class Record, typename Id> -void OModalHelper<Dialog, Record, Id>::cancel() { - m_ids.clear(); - m_doneIds.clear(); - m_done.clear(); - m_transactions.clear(); - - /* we also need to remove the QDialogs */ - /* and hide the queue dialog if present */ - if (m_mode == New && !m_editing.isEmpty() ) { - for (DialogMap::Iterator it = m_editing.begin(); it != m_editing.end(); ++it ) - delete it.key(); - - m_editing.clear(); - }else if (m_dialog ) - queuedDialog()->setRecord( 0, 0 ); - - m_controler->setTransactionID( 0 ); -} - - -/** - * This cancels editing of the record behind the Transaction Number - * Note that if editing is already done it will also be removed from this list - */ -template<class Dialog, class Record, typename Id> -void OModalHelper::cancel( TransactionID tid ) { - /* wrong tid */ - if (!m_transactions.contains( tid ) && !m_done.contains( tid) ) - return; - - if (m_mode == New ) - /* reverse map eek */ - for (DialogMap::Iterator it = m_editing.begin(); it != m_editing.end(); ++it ) - if ( it.data() == tid ) { - it.key()->hide(); - delete it.key(); - it = m_editing.remove( it ); - break; - } - - /* now remove from the various maps done and currently editing map*/ - if (m_transactions.contains( tid ) ) - m_ids.remove( m_transactions[tid] ); - if (m_done.contains( tid ) ) - m_doneIds.remove( m_done[tid ] ); - m_done.remove( tid ); - m_transactions.remove( tid ); - - next( 0 ); -} - -/** - * Connect to the done Signal. SIGNAL( done(int, TransactionID ) ) - * This signal gets emitted whenever a Record was accepted or rejected - * - * @param rec The object where the slot belongs to - * @param slot The slot which should be called. See the needed parameter above - */ -template<class Dialog, class Record, typename Id> -void OModalHelper<Dialog, Record, Id>::connectDone( QObject* rec, const char* slot ) { - QObject::connect(m_signal, SIGNAL(done(int, TransactionID) ), - rec, slot ); -} - -/** - * Connect to the accepted Signal. SIGNAL( accepted(TransactionID ) ) - * This signal gets emitted whenever a Record was accepted - * - * @param rec The object where the slot belongs to - * @param slot The slot which should be called. See the needed parameter above - */ -template<class Dialog, class Record, typename Id> -void OModalHelper<Dialog, Record, Id>::connectAccepted( QObject* rec, const char* slot ) { - QObject::connect(m_signal, SIGNAL(accepted(TransactionID) ), - rec, slot ); -} - -/** - * Same as the accepted method but this one gets emitted if the dialog - * got rejected. - * SIGNAL( rejected(TransactionID) ) - * - * @param rec The QObject of the slot - * @param slot The slot make sure the signature is correct - */ -template<class Dialog, class Record, typename Id> -void OModalHelper<Dialog, Record, Id>::connectRejected( QObject* rec, const char* slot ) { - QObject::connect(m_signal, SIGNAL(rejected(TransactionID) ), - rec, slot ); -} - -/** - * Tell the helper to handle a record. If the record is currently handled - * it will be made active. - * Already handled record which are waiting getting popped are not taken into account - * Otherwise this helpers make the record editable. - * The record supplied needs to have a valid copy operator and constructor. - * In the case where the record is already present the parameter gets discarded. - * If you want the new record to be taken you need to cancel the Transaction first - * - * @param id The Identification of the Record. For PIM it would uid() - * @param rec The record we want to be edited - * - * @returns This functions returns the TransactionId assigned to the record - * - */ -template<class Dialog, class Record, typename Id> -TransactionID OModalHelper<Dialog, Record, Id>::handle( Id id, const Record& rec ) { - static TransactionID t_id = 0; - /* - *this method consists out of two parts divided each into New and Queued Mode. - * Either we have the dialog already, in this case we need to highlight the widget - * Or we need to add it. - */ - TransactionID tid = 0; - /* we already have the record lets see if it was done or not */ - if ( !(tid = transactionID( id ) ) ) { - if (m_mode == New ) { - /* lets find the dialog and show it need to reverse map*/ - for (DialogMap::Iterator it = m_editing.begin(); it != m_editing.end(); ++it ) - if ( it.data() == tid ) - it.key()->show(); - }else if (m_controler->transactionID() != tid ) { - int po = pos( tid ); - m_controler->setTransactionID( tid ); - static_cast<Dialog*>( queuedDialog()->centerDialog() )->setRecord( m_ids[ m_transactions[tid] ] ); - queuedDialog()->setRecord( po, m_transactions.count() ); - } - }else { - tid = ++t_id; - m_transactions.insert( tid, id ); - m_ids.insert( id, rec ); - - if (m_mode == New ) - m_editing.insert( newDialogRecord( rec ), tid ); - else{ - m_controler->setTransactionID( tid ); - static_cast<Dialog*>( queuedDialog()->centerDialog() )->setRecord( rec ); - queuedDialog()->setRecord( m_transactions.count(), m_transactions.count() ); - } - } - return tid; -} - -/** - * The goal of this helper is to help you to create non blocking - * GUIs. In the example of the todolist you can have the edit dialog - * but still change the priority or completion inline even if you currently - * edit the record. - * Your Dialog needs to have a Method setData(int,const QVariant& ) which will be called - * in these cases. - * If you edit anything while a record is edited call this function to merge the - * change in. Note if the record is not handled here we will ignore the request - * - */ -template<class Dialog, class Record, typename Id> -void OModalHelper<Dialog, Record, Id>::edited( Id id, int what, const QVariant& data ) { - int tid; - if (!( tid = transactionID( id ) ) ) - return; - - if (m_mode == New ) { - for (DialogMap::Iterator it= m_editing.begin(); it != m_editing.end(); ++it ) - if ( it.data() == tid ) - it.key()->setData( what, data ); - }else{ - int po = pos( tid ); - Dialog* dia = static_cast<Dialog*>( queuedDialog()->centerDialog() ); - dia->setRecord( m_ids[id] ); - dia->setData( what, data ); - queuedDialog()->setRecord( pos, m_transactions.count() ); - } -} - -/** - * This functions either returns the unedited record the done record - * or a new empty Record using Record(). - * If a done record is retrieved all traces are removed inside this class. This - * is what was called popping a record. This means when you call this function - * with the same TransactionID an Empty record is retrieved. - * - */ -template<class Dialog, class Record, typename Id> -Record OModalHelper<Dialog, Record, Id>::record( TransactionID tid)const { - if (m_transactions.contains( tid ) ) - return m_ids[ m_transactions[tid] ]; - else if (m_done.contains( tid ) ) { - Record rec = m_doneIds[ m_done[ tid] ]; - m_doneIds.remove( m_done[ tid ] ); - m_done.remove( tid ); - return rec; - }else - return Record(); -} - -/** - * Returns all done Records and removes all references to them internally. A 2nd call to this will - * only contain done record that where edited past the point - */ -template<class Dialog, class Record, typename Id> -OModalHelper<Dialog,Record,Id>::RecordList OModalHelper<Dialog, Record, Id>::recordsDone()const { - RecordList list; - - for (IdMap::ConstIterator it = m_doneIds.begin(); it != m_doneIds.end(); ++it ) - list.append( it.data() ); - - /* clean up */ - m_done.clear(); - m_doneIds.clear(); - - return list; -} - - -/** - * @internal - */ -template<class Dialog, class Record, typename Id> -void OModalHelper<Dialog, Record, Id>::done( int status, TransactionID tid) { -/* If we're in New mode the transaction Id does not count */ - Record rec; - - if (m_mode == New ) { - Dialog *dia = static_cast<Dialog*>( m_controler->dialog() ); - m_controler->setTransactionID( 0 ); // set the internal dialog to 0l again - tid = m_editing[ dia ]; - m_editing.remove( dia ); - rec = dia->record(); - delete dia; - }else - rec = queuedDialog()->record(); - - Id id = m_transactions[ tid ]; - if (result == QDialog::Accept ) { - m_doneIds.insert( is, rec ); - m_done.insert( tid, id ); - } - - m_transactions.remove( tid ); - m_ids.remove( id ); - - - if (status == QDialog::Accept ) - emit m_signal->accepted( tid ); - else - emit m_signal->rejected( tid ); - - emit m_signal->done( result, tid ); - - next( 0 ); -} - -/** - * @internal - */ -template<class Dialog, class Record, typename Id> -void OModalHelper<Dialog, Record, Id>::next( TransactionID tid) { - if (m_mode == New ) - return; - - if (! (m_transactions.count() ) ) { - m_controler->setTransactionID( 0 ); - queuedDialog()->setRecord( 0, 0 ); - return; - } - - int next; - Record rec; - - /* save the maybe edited record before switching */ - Dialog *dia = static_cast<Dialog*>( queuedDialog()->centerDialog() ); - rec = dia->record(); - m_ids.replace( m_transactions[tid], rec ); - - rec = nextRecord( tid, next ); - queuedDialog()->setRecord( next, m_transactions.count() ); - dia->setRecord( rec ); - - m_controler->setTransactionID( tid ); // was changed during the next call -} - -/** - * @internal - */ -/* - * code duplication should create a template fcuntion - * which takes a pointer to a function ( next, prev ) function - */ -template<class Dialog, class Record, typename Id> -void OModalHelper<Dialog, Record, Id>::prev( TransactionID tid ) { - if (m_mode == New ) - return; - - if (! (m_transactions.count()) ) { - m_controler->setTransactionID( 0 ); - queuedDialog()->setRecord( 0, 0 ); - return; - } - - int prev; - Record rec; - - /* save the maybe edited record before switching */ - Dialog *dia = static_cast<Dialog*>( queuedDialog()->centerDialog() ); - rec = dia->record(); - m_ids.replace( m_transactions[tid], rec ); - - rec = prevRecord( tid, prev ); - queuedDialog()->setRecord( prev, m_transactions.count() ); - dia->setRecord( rec ); - - m_controler->setTransactionID( tid ); // was changed during the next call -} - -/** - * @internal - */ -template<class Dialog, class Record, typename Id> -Record OModalHelper<Dialog, Record, Id>::nextRecord( TransactionID &tid, int &po ) { - /* if tid is == 0 we will take the first one */ - /* pos starts at 1 here */ - /* we know we're only called if there are records */ - Record rec; - TransactionMap::Iterator it; - if (!tid ) { - po = 1; - TransactionMap::Iterator it = m_transactions.begin(); - }else{ - po = pos( tid ); - /* if it is the last take the first as next */ - if ( po == m_transactions.count() ) { - po = 1; - it = m_transactions.begin(); - }else { - /* we know we're not the last and there is one after us */ - it = m_transactions.find( tid ); - ++it; ++po; - } - } - - tid = it.key(); - rec = m_ids[ tid ]; - return rec; -} - -/** - * @internal - */ -template<class Dialog, class Record, typename Id> -Record OModalHelper<Dialog, Record, Id>::prevRecord( TransactionID& tid, int& pos ) { - /* if tid is == 0 we will take the first one */ - /* pos starts at 1 here */ - /* we know we're only called if there are records */ - Record rec; - TransactionMap::Iterator it; - if (!tid ) { - po = 1; - TransactionMap::Iterator it = m_transactions.begin(); - }else{ - po = pos( tid ); - /* if it is the last take the first as next */ - if ( po == 1 ) { - po = m_transactions.count(); - it = m_transactions.end(); - --it; - }else { - /* we know we're not the first and there is one before us */ - it = m_transactions.find( tid ); - --it; --po; - } - } - - tid = it.key(); - rec = m_ids[ tid ]; - return rec; -} - -/** - * @internal - */ -template<class Dialog, class Record, typename Id> -int OModalHelper<Dialog, Record, Id>::pos( TransactionID id)const { - int i = 1; - for ( TransactionMap::ConstIterator it = m_transactions.begin(); it != m_transactions.end(); ++it, i++ ) - if ( it.key() == id ) - return i; - - - return 0; -} - -/** - * @internal - */ -template<class Dialog, class Record, typename Id> -Dialog* OModalHelper<Dialog, Record, Id>::newDialogRecord( const Record& rec ) { - Dialog* dia = new Dialog; - dia->setRecord( rec ); - dia->setDisabled( m_disabled ); - - QObject::connect(dia, SIGNAL(done(int) ), - m_controler, SLOT(done(int) ) ); - - /* FIXME big screen QPEApplication needs fixed*/ - dia->show(); -} - -template<class Record, class Dialog, typename Id> -OModalHelperDialog* OModalHelper<Record, Dialog, Id>::queuedDialog()const{ - if (!m_dialog ) { - m_dialog = new OModalHelperDialog; - m_dialog->setEnabled( m_disabled ); - - QObject::connect(m_dialog, SIGNAL(done(int) ), - m_controler, SLOT(done(int) ) ); - QObject::connect(m_dialog, SIGNAL(next() ), - m_controler, SLOT(next() ) ); - QObject::connect(m_dialog, SIGNAL(prev() ), - m_controler, SLOT(prev() ) ); - } - return m_dialog; -} - -#endif diff --git a/libopie/big-screen/osplitter.cpp b/libopie/big-screen/osplitter.cpp deleted file mode 100644 index 0c9ed6c..0000000 --- a/libopie/big-screen/osplitter.cpp +++ b/dev/null @@ -1,583 +0,0 @@ -/* - =. This file is part of the OPIE Project - .=l. Copyright (c) 2003 hOlgAr <zecke@handhelds.org> - .>+-= - _;:, .> :=|. This library is free software; you can -.> <`_, > . <= redistribute it and/or modify it under -:`=1 )Y*s>-.-- : the terms of the GNU Library General Public -.="- .-=="i, .._ License as published by the Free Software - - . .-<_> .<> Foundation; either version 2 of the License, - ._= =} : or (at your option) any later version. - .%`+i> _;_. - .i_,=:_. -<s. This library is distributed in the hope that - + . -:. = it will be useful, but WITHOUT ANY WARRANTY; - : .. .:, . . . without even the implied warranty of - =_ + =;=|` MERCHANTABILITY or FITNESS FOR A - _.=:. : :=>`: PARTICULAR PURPOSE. See the GNU -..}^=.= = ; Library General Public License for more -++= -. .` .: details. - : = ...= . :.=- - -. .:....=;==+<; You should have received a copy of the GNU - -_. . . )=. = Library General Public License along with - -- :-=` this library; see the file COPYING.LIB. - If not, write to the Free Software Foundation, - Inc., 59 Temple Place - Suite 330, - Boston, MA 02111-1307, USA. - -*/ - -#include <qvaluelist.h> -#include <qvbox.h> - -#include <opie/otabwidget.h> - -#include "osplitter.h" - - -/** - * - * This is the constructor of OSplitter - * You might want to call setSizeChange to tell - * OSplitter to change its layout when a specefic - * mark was crossed. OSplitter sets a default value. - * - * You cann add widget with addWidget to the OSplitter. - * OSplitter supports also grouping of Splitters where they - * can share one OTabBar in small screen mode. This can be used - * for email clients like vies but see the example. - * - * @param orient The orientation wether to layout horizontal or vertical - * @param parent The parent of this widget - * @param name The name passed on to QObject - * @param fl Additional widgets flags passed to QWidget - * - * @short single c'tor of the OSplitter - */ -OSplitter::OSplitter( Orientation orient, QWidget* parent, const char* name, WFlags fl ) - : QFrame( parent, name, fl ) -{ - m_orient = orient; - m_hbox = 0; - m_size_policy = 330; - setFontPropagation( AllChildren ); - setPalettePropagation( AllChildren ); - - /* start by default with the tab widget */ - m_tabWidget = 0; - m_parentTab = 0; - changeTab(); - -} - - -/** - * Destructor destructs this object and cleans up. All child - * widgets will be deleted - * @see addWidget - */ -OSplitter::~OSplitter() { - qWarning("Deleted Splitter"); - m_splitter.setAutoDelete( true ); - m_splitter.clear(); - - delete m_hbox; - delete m_tabWidget; -} - - -/** - * Sets the label for the Splitter. This label will be used - * if a parent splitter is arranged as TabWidget but - * this splitter is in fullscreen mode. Then a tab with OSplitter::label() - * and iconName() gets added. - * - * @param name The name of the Label - */ -void OSplitter::setLabel( const QString& name ) { - m_name = name; -} - -/** - * @see setLabel but this is for the icon retrieved by Resource - * - * @param name The name of the icon in example ( "zoom" ) - */ -void OSplitter::setIconName( const QString& name ) { - m_icon = name; -} - - -/** - * returns the iconName - * @see setIconName - */ -QString OSplitter::iconName()const { - return m_icon; -} - -/** - * returns the label set with setLabel - * @see setLabel - */ -QString OSplitter::label()const { - return m_name; -} - -/** - * This function sets the size change policy of the splitter. - * If this size marked is crossed the splitter will relayout. - * Note: that depending on the set Orientation it'll either look - * at the width or height. - * Note: If you want to from side to side view to tabbed view you need - * to make sure that the size you supply is not smaller than the minimum - * size of your added widgets. Note that if you use widgets like QComboBoxes - * you need to teach them to accept smaller sizes as well @see QWidget::setSizePolicy - * - * @param width_height The mark that will be watched. Interpreted depending on the Orientation of the Splitter. - * @return void - */ -void OSplitter::setSizeChange( int width_height ) { - m_size_policy = width_height; - QSize sz(width(), height() ); - QResizeEvent ev(sz, sz ); - resizeEvent(&ev); -} - -/** - * This functions allows to add another OSplitter and to share - * the OTabBar in small screen mode. The ownerships gets transfered. - * OSplitters are always added after normal widget items - */ -void OSplitter::addWidget( OSplitter* split ) { - m_splitter.append( split ); - - /* - * set tab widget - */ - if (m_tabWidget ) - setTabWidget( m_parentTab ); - else{ - Opie::OSplitterContainer con; - con.widget =split; - addToBox( con ); - } -} - -/* - * If in a tab it should be removed - * and if in a hbox the reparent kills it too - */ -/** - * This removes the splitter again. You currently need to call this - * before you delete or otherwise you can get mem corruption - * or other weird behaviour. - * Owner ship gets transfered back to you it's current parent - * is 0 - */ -void OSplitter::removeWidget( OSplitter* split) { - split->setTabWidget( 0 ); - split->reparent( 0, 0, QPoint(0, 0) ); -} - -/** - * Adds a widget to the Splitter. The widgets gets inserted - * at the end of either the Box or TabWidget. - * Ownership gets transfered and the widgets gets reparented. - * Note: icon and label is only available on small screensizes - * if size is smaller than the mark - * Warning: No null checking of the widget is done. Only on debug - * a message will be outputtet - * - * @param wid The widget which will be added - * @param icon The icon of the possible Tab - * @param label The label of the possible Tab - */ -void OSplitter::addWidget( QWidget* wid, const QString& icon, const QString& label ) { -#ifdef DEBUG - if (!wid ) { - qWarning("Widget is not valid!"); - return; - } -#endif - Opie::OSplitterContainer cont; - cont.widget = wid; - cont.icon =icon; - cont.name = label; - - m_container.append( cont ); - - /* - * - */ - if (!m_splitter.isEmpty() && (m_tabWidget || m_parentTab ) ) - setTabWidget( m_parentTab ); - else { - if (m_hbox ) - addToBox( cont ); - else - addToTab( cont ); - } -} - - -/** - * Removes the widget from the tab widgets if necessary. - * OSplitter drops ownership of this widget and the widget - * will be reparented i tto 0. - * The widget will not be deleted. - * - * @param w The widget to be removed - */ -void OSplitter::removeWidget( QWidget* w) { - ContainerList::Iterator it; - for ( it = m_container.begin(); it != m_container.end(); ++it ) - if ( (*it).widget == w ) - break; - - if (it == m_container.end() ) - return; - - - /* only tab needs to be removed.. box recognizes it */ - if ( !m_hbox ) - removeFromTab( w ); - - - /* Find reparent it and remove it from our list */ - - w->reparent( 0, 0, QPoint(0, 0)); - it = m_container.remove( it ); - -} - - -/** - * This method will give focus to the widget. If in a tabwidget - * the tabbar will be changed - * - * @param w The widget which will be set the current one - */ -void OSplitter::setCurrentWidget( QWidget* w) { - if (m_tabWidget ) - m_tabWidget->setCurrentTab( w ); -// else - // m_hbox->setFocus( w ); - -} - -/** - * This is an overloaded member function and only differs in the - * argument it takes. - * Searches list of widgets for label. It'll pick the first label it finds - * - * @param label Label to look for. First match will be taken - */ -void OSplitter::setCurrentWidget( const QString& label ) { - ContainerList::Iterator it; - for (it = m_container.begin(); it != m_container.end(); ++it ) { - if ( (*it).name == label ) { - setCurrentWidget( (*it).widget ); - break; - } - } -} - -/** - * This will only work when the TabWidget is active - * If everything is visible this signal is kindly ignored - * @see OTabWidget::setCurrentTab(int) - * - * @param tab The tab to make current - */ -void OSplitter::setCurrentWidget( int tab ) { - if (m_tabWidget ) - m_tabWidget->setCurrentTab( tab ); -} - -/** - * return the currently activated widget if in tab widget mode - * or null because all widgets are visible - */ -QWidget* OSplitter::currentWidget() const{ - if (m_tabWidget) - return m_tabWidget->currentWidget(); - else if (m_parentTab ) - return m_parentTab->currentWidget(); - - return 0l; -} -/* wrong */ -#if 0 -/** - * @reimplented for internal reasons - * returns the sizeHint of one of its sub widgets - */ -QSize OSplitter::sizeHint()const { - if (m_parentTab ) - return QFrame::sizeHint(); - - if (m_hbox ) - return m_hbox->sizeHint(); - else - return m_tabWidget->sizeHint(); -} - -QSize OSplitter::minimumSizeHint()const { - if (m_parentTab ) - return QFrame::minimumSizeHint(); - if (m_hbox) - return m_hbox->sizeHint(); - else - return m_tabWidget->sizeHint(); -} -#endif - -/** - * @reimplemented for internal reasons - */ -void OSplitter::resizeEvent( QResizeEvent* res ) { - QFrame::resizeEvent( res ); - /* - * - */ -// qWarning("Old size was width = %d height = %d", res->oldSize().width(), res->oldSize().height() ); - bool mode = true; - qWarning("New size is width = %d height = %d %s", res->size().width(), res->size().height(), name() ); - if ( res->size().width() > m_size_policy && - m_orient == Horizontal ) { - changeHBox(); - mode = false; - }else if ( (res->size().width() <= m_size_policy && - m_orient == Horizontal ) || - (res->size().height() <= m_size_policy && - m_orient == Vertical ) ) { - changeTab(); - }else if ( res->size().height() > m_size_policy && - m_orient == Vertical ) { - qWarning("Changng to vbox %s", name() ); - changeVBox(); - mode = false; - } - - emit sizeChanged(mode, m_orient ); -} - -/* - * Adds a container to a tab either the parent tab - * or our own - */ -void OSplitter::addToTab( const Opie::OSplitterContainer& con ) { - QWidget *wid = con.widget; -// not needed widgetstack will reparent as well wid.reparent(m_tabWidget, wid->getWFlags(), QPoint(0, 0) ); - if (m_parentTab ) - m_parentTab->addTab( wid, con.icon, con.name ); - else - m_tabWidget->addTab( wid, con.icon, con.name ); -} - - -/* - * adds a container to the box - */ -void OSplitter::addToBox( const Opie::OSplitterContainer& con ) { - QWidget* wid = con.widget; - wid->reparent(m_hbox, 0, QPoint(0, 0) ); -} - - -/* - * Removes a widget from the tab - */ -void OSplitter::removeFromTab( QWidget* wid ) { - if (m_parentTab ) - m_parentTab->removePage( wid ); - else - m_tabWidget->removePage( wid ); -} - -/* - * switches over to a OTabWidget layout - * it is recursive - */ -void OSplitter::changeTab() { - /* if we're the owner of the tab widget */ - if (m_tabWidget ) { - raise(); - show(); - m_tabWidget->setGeometry( frameRect() ); - return; - } - - qWarning(" New Tab Widget %s", name() ); - /* - * and add all widgets this will reparent them - * delete m_hbox set it to 0 - * - */ - OTabWidget *tab; - if ( m_parentTab ) { - hide(); - tab = m_parentTab; - /* expensive but needed cause we're called from setTabWidget and resizeEvent*/ - if (!m_container.isEmpty() ) { - ContainerList::Iterator it = m_container.begin(); - for (; it != m_container.end(); ++it ) - m_parentTab->removePage( (*it).widget ); - } - }else - tab = m_tabWidget = new OTabWidget( this ); - - connect(tab, SIGNAL(currentChanged(QWidget*) ), - this, SIGNAL(currentChanged(QWidget*) ) ); - - for ( ContainerList::Iterator it = m_container.begin(); it != m_container.end(); ++it ) { - qWarning("Widget is %s", (*it).name.latin1() ); - addToTab( (*it) ); - } - - for ( OSplitter* split = m_splitter.first(); split; split = m_splitter.next() ) { - split->reparent(this, 0, QPoint(0, 0) ); - split->setTabWidget( tab ); - } - - - delete m_hbox; - m_hbox = 0; - if (!m_tabWidget ) - return; - - m_tabWidget->setGeometry( frameRect() ); - m_tabWidget->show(); - -} - -/* - * changes over to a box - * this is recursive as well - */ -void OSplitter::changeHBox() { - if (m_hbox ) { - m_hbox->setGeometry( frameRect() ); - return; - } - - qWarning("new HBox %s", name() ); - m_hbox = new QHBox( this ); - commonChangeBox(); -} - -void OSplitter::changeVBox() { - if (m_hbox ) { - m_hbox->setGeometry( frameRect() ); - return; - } - - qWarning("New VBOX %s", name() ); - m_hbox = new QVBox( this ); - - commonChangeBox(); - -} - -/* - * common box code - * first remove and add children - * the other splitters - * it is recursive as well due the call to setTabWidget - */ -void OSplitter::commonChangeBox() { - qWarning(" Name of Splitters is %s", name() ); - - for (ContainerList::Iterator it = m_container.begin(); it != m_container.end(); ++it ) { - /* only if parent tab.. m_tabWidgets gets deleted and would do that as well */ - if (m_parentTab ) - removeFromTab( (*it).widget ); - qWarning("Adding to box %s", (*it).name.latin1() ); - addToBox( (*it) ); - } - for ( OSplitter* split = m_splitter.first(); split; split = m_splitter.next() ) { - /* tell them the world had changed */ - split->setTabWidget( 0 ); - Opie::OSplitterContainer con; - con.widget = split; -// con.widget = split->m_tabWidget ? static_cast<QWidget*>(split->m_tabWidget) -// : static_cast<QWidget*>(split->m_hbox); - addToBox( con ); - } - - - - if (m_parentTab ) - m_parentTab->addTab(m_hbox, iconName(), label() ); - else { - qWarning(" setting Box geometry for %s", name() ); - m_hbox->setGeometry( frameRect() ); - m_hbox->show(); - delete m_tabWidget; - m_tabWidget = 0; - show(); // also show this widget - } -} - -/* - * sets the tabwidget, removes tabs, and relayouts the widget - */ -void OSplitter::setTabWidget( OTabWidget* wid) { - /* clean up cause m_parentTab will not be available for us */ - if ( m_parentTab ) { - if (m_hbox ) - m_parentTab->removePage( m_hbox ); - else if (!m_container.isEmpty() ){ - ContainerList::Iterator it = m_container.begin(); - for ( ; it != m_container.end(); ++it ) - m_parentTab->removePage( (*it).widget ); - } - } - /* the parent Splitter changed so either make us indepent or dep */ - - m_parentTab = wid; - - QWidget *tab = m_tabWidget; - QWidget *box = m_hbox; - m_hbox = 0; m_tabWidget = 0; - - if ( layoutMode() ) - changeTab(); - else if (m_orient == Horizontal ) - changeHBox(); - else - changeVBox(); - - /* our own crap is added and children from change* */ - delete tab; - delete box; -} - - -#if 0 -void OSplitter::reparentAll() { - if (m_container.isEmpty() ) - return; - - ContainerList::Iterator it = m_container.begin(); - for ( ; it != m_container.end(); ++it ) - (*it).wid->reparent(0, 0, QPoint(0, 0) ); - - -} -#endif - -/** - * @internal - */ -bool OSplitter::layoutMode()const { - if ( size().width() > m_size_policy && - m_orient == Horizontal ) { - return false; - }else if ( size().height() > m_size_policy && - m_orient == Vertical ) { - return false; - } - - return true; -} diff --git a/libopie/big-screen/osplitter.h b/libopie/big-screen/osplitter.h deleted file mode 100644 index 61a247b..0000000 --- a/libopie/big-screen/osplitter.h +++ b/dev/null @@ -1,146 +0,0 @@ -/* - =. This file is part of the OPIE Project - .=l. Copyright (c) 2003 hOlgAr <zecke@handhelds.org> - .>+-= - _;:, .> :=|. This library is free software; you can -.> <`_, > . <= redistribute it and/or modify it under -:`=1 )Y*s>-.-- : the terms of the GNU Library General Public -.="- .-=="i, .._ License as published by the Free Software - - . .-<_> .<> Foundation; either version 2 of the License, - ._= =} : or (at your option) any later version. - .%`+i> _;_. - .i_,=:_. -<s. This library is distributed in the hope that - + . -:. = it will be useful, but WITHOUT ANY WARRANTY; - : .. .:, . . . without even the implied warranty of - =_ + =;=|` MERCHANTABILITY or FITNESS FOR A - _.=:. : :=>`: PARTICULAR PURPOSE. See the GNU -..}^=.= = ; Library General Public License for more -++= -. .` .: details. - : = ...= . :.=- - -. .:....=;==+<; You should have received a copy of the GNU - -_. . . )=. = Library General Public License along with - -- :-=` this library; see the file COPYING.LIB. - If not, write to the Free Software Foundation, - Inc., 59 Temple Place - Suite 330, - Boston, MA 02111-1307, USA. - -*/ - -#ifndef OPIE_SPLITTER_H -#define OPIE_SPLITTER_H - -#include <qstring.h> - -#include <qframe.h> -#include <qvaluelist.h> -#include <qlist.h> - -#include "obigscreen_p.h" - -/* forward declarations */ -class OTabWidget; -class QHBox; -//template class QValueList<Opie::OSplitterContainer>; - -/* - * TODO - * -check API docu - * -one more example - * -allow inserting at a position - */ - -/** - * - * If you've widgets that could be placed side by side but you think - * on small resolutions is not enough place but it would really make sense - * on bigger resolutions this class will help you. - * You can add as many widgets you want to it. Set a poliy on which width/height it - * should switch the layout. - * You can either say to place widgets vertical or horizontal. - * This class uses QHBox, QVBox and QTAbWidget internally. - * OSplitter takes ownership of the widgets - * - * @since 1.2 - * - * @short a small dynamically changing its layout to store two or more widgets side by side - * @version 0.1 - * @author zecke - */ -class OSplitter : public QFrame{ - Q_OBJECT -public: - typedef QValueList<Opie::OSplitterContainer> ContainerList; - OSplitter( Qt::Orientation = Horizontal, QWidget *parent = 0, - const char* name = 0, WFlags fl = 0 ); - ~OSplitter(); - - void setLabel( const QString& name ); - void setIconName( const QString& name ); - QString label()const; - QString iconName()const; - - void setSizeChange( int width_height ); - - void addWidget( OSplitter* splitter ); - void addWidget( QWidget* wid, const QString& icon, const QString& label ); - void removeWidget( QWidget* ); - void removeWidget( OSplitter* ); - - void setCurrentWidget( QWidget* ); - void setCurrentWidget( const QString& label ); - void setCurrentWidget( int ); - QWidget* currentWidget()const; - - -signals: - /** - * Emitted if in tab and comes directly from the tab widget - * - */ - void currentChanged( QWidget* ); - - /** - * emitted whenever a border is crossed - * true if in small screen mode - * false if in bigscreen - * this signal is emitted after the layout switch - * @param b The layout mode - * @param ori The orientation - */ - void sizeChanged( bool b, Orientation ori); -public: -// QSize sizeHint()const; -// QSize minimumSizeHint()const; - -protected: - void resizeEvent( QResizeEvent* ); - -private: - /* true if OTabMode */ - bool layoutMode()const; -// void reparentAll(); - void setTabWidget( OTabWidget*); - void addToTab( const Opie::OSplitterContainer& ); - void addToBox( const Opie::OSplitterContainer& ); - void removeFromTab( QWidget* ); - void changeTab(); - void changeHBox(); - void changeVBox(); - void commonChangeBox(); - QHBox *m_hbox; - OTabWidget *m_tabWidget; - OTabWidget *m_parentTab; - Orientation m_orient; - int m_size_policy; - - ContainerList m_container; - QList<OSplitter> m_splitter; - - QString m_icon, m_name; - - struct Private; - Private *d; -}; - - -#endif diff --git a/libopie/big-screen/owidgetstack.cpp b/libopie/big-screen/owidgetstack.cpp deleted file mode 100644 index 967c54b..0000000 --- a/libopie/big-screen/owidgetstack.cpp +++ b/dev/null @@ -1,404 +0,0 @@ -#include <qapplication.h> -#include <qwidgetstack.h> - -#include "owidgetstack.h" - -namespace { - const int mode_size = 330; -} - -/** - * This is the standard widget. For simple usage see the example. Normally this widget - * is the central widget of a QMainWindow. - * Use removeWidget before you delete a widget yourself. OWidgetStack does not - * yet recognize removal of children. - * - * @param parent The parent widget. It maybe 0 but then you need to take care of deletion. - * Or you use QPEApplication::showMainWidget(). - * @param name Name will be passed on to QObject - * @param fl Additional window flags passed to QFrame. see @Qt::WFlags - */ -OWidgetStack::OWidgetStack( QWidget* parent, const char* name, WFlags fl) - : QFrame( parent, name, fl ) -{ - m_last = m_mWidget = 0; - m_forced = false; - - QApplication::desktop()->installEventFilter( this ); - setFontPropagation ( AllChildren ); - setPalettePropagation( AllChildren ); - - /* sets m_mode and initializes more */ - /* if you change this call change switchTop as well */ - m_stack = 0; - switchStack(); -} - -/** - * The destructor. It deletes also all added widgets. - * - */ -OWidgetStack::~OWidgetStack() { - if (m_mode == BigScreen && !m_list.isEmpty() ) { - QMap<int, QWidget*>::Iterator it = m_list.begin(); - for ( ; it != m_list.end(); ++it ) - delete it.data(); - } - m_list.clear(); - -} - -/** - * return the mode of the desktop. There are currently two modes. SmallScreen - * with a normal PDA resolution and BigScreen with resolutions greater than - * 330 for width and height. - * You can also force the mode this widget is in with forceMode() - * Note that NoForce will be never returned from here - */ -enum OWidgetStack::Mode OWidgetStack::mode()const { - return m_mode; -} - -/** - * You can also force one of the modes and then - * this widget stops on listening to size changes. You - * can revert to the scanning behaviour by setting mode - * to NoForce - */ -void OWidgetStack::forceMode( enum Mode mode) { - m_forced = mode != NoForce; - - /* we need to see which mode we're in */ - if (!m_forced ) { - if ( QApplication::desktop()->width() >= - mode_size ) - mode = BigScreen; - else - mode = SmallScreen; - } - switch( mode ) { - case NoForce: - case SmallScreen: - switchStack(); - break; - case BigScreen: - switchTop(); - break; - - } - - m_mode = mode; -} - -/** - * Adds a widget to the stack. The first widget added is considered - * to be the mainwindow. This is important because if Opie is in - * BigScreen mode the sizeHint of the MainWindow will be returned. - * In Small Screen the sizeHint of the QWidgetStack is returned. - * See QWidgetStack::sizeHint. - * This widget takes ownership of the widget and may even reparent. - * All windows will be hidden - * - * @param wid The QWidget to be added - * @param id An ID for the Widget. If the ID is duplicated the - last set widget will be related to the id - * - */ -void OWidgetStack::addWidget( QWidget* wid, int id) { - if (!wid) - return; - - /* set our main widget */ - if (!m_mWidget) - m_mWidget = wid; - - m_list.insert( id, wid ); - - /** - * adding does not raise any widget - * But for our mainwidget we prepare - * the right position with the right parent - */ - if (m_mode == SmallScreen ) - m_stack->addWidget( wid,id ); - else if ( m_mWidget == wid ) { - wid->reparent(this, 0, contentsRect().topLeft() ); - wid->hide(); - }else { - wid->reparent(0, WType_TopLevel, QPoint(10, 10) ); - wid->hide(); - } -} - - -/** - * Remove the widget from the stack it'll be reparented to 0 - * and ownership is dropped. You need to delete it. - * If the removed widget was the mainwindow consider - * to call setMainWindow. - * - * @param wid The QWidget to be removed - */ -void OWidgetStack::removeWidget( QWidget* wid) { - if (!wid) - return; - - if (m_mode == SmallScreen ) - m_stack->removeWidget( wid ); - - - wid->reparent(0, 0, QPoint(0, 0) ); - m_list.remove( id(wid) ); - - if ( wid == m_mWidget ) - m_mWidget = 0; -} - -#if 0 -/** - * @internal_resons - */ -QSizeHint OWidgetStack::sizeHint()const { - -} - -/** - * @internal_reasons - */ -QSizeHint OWidgetStack::minimumSizeHint()const { - -} -#endif - -/** - * This function tries to find the widget with the id. - * You supplied a possible id in addWIdget. Note that not - * QWidget::winId() is used. - * - * @param id The id to search for - * - * @return The widget or null - * @see addWidget - */ -QWidget* OWidgetStack::widget( int id) const { - return m_list[id]; -} - -/** - * Tries to find the assigned id for the widget - * or returns -1 if no widget could be found - * @param wid The widget to look for - */ -int OWidgetStack::id( QWidget* wid)const{ - if (m_list.isEmpty() ) - return -1; - - QMap<int, QWidget*>::ConstIterator it = m_list.begin(); - for ( ; it != m_list.end(); ++it ) - if ( it.data() == wid ) - break; - - /* if not at the end return the key */ - return it == m_list.end() ? -1 : it.key(); -} - - -/** - * This function returns the currently visible - * widget. In BigScreen mode the mainwindow - * is returned - */ -QWidget* OWidgetStack::visibleWidget()const { - if (m_mode == SmallScreen ) - return m_stack->visibleWidget(); - else - return m_mWidget; - -} - -/** - * This method raises the widget wit the specefic id. - * Note that in BigScreen mode the widget is made visible - * but the other ( previous) visible widget(s) will not - * be made invisible. If you need this use hideWidget(). - * - * @param id Raise the widget with id - */ -void OWidgetStack::raiseWidget( int id) { - return raiseWidget( widget( id ) ); -} - -/** - * This is an overloaded function and only differs in its parameters. - * @see raiseWidget( int ) - */ -void OWidgetStack::raiseWidget( QWidget* wid) { - m_last = wid; - if (m_mode == SmallScreen ) - m_stack->raiseWidget( wid ); - else { - int ide; - emit aboutToShow( wid ); - /* if someone is connected and the widget is actually available */ - if ( receivers( SIGNAL(aboutToShow(int) ) ) && - ( (ide = id( wid ) ) != -1 ) ) - emit aboutToShow( ide ); - - /* ### FIXME PLACE THE WIDGET right */ - wid->show(); - } -} - -/** - * This will hide the currently visible widget - * and raise the widget specified by the parameter. - * Note that this method does not use visibleWIdget but remembers - * the last raisedWidget - */ -void OWidgetStack::hideWidget( int id) { - /* hiding our main widget wouldn't be smart */ - if ( m_mode == BigScreen && m_last != m_mWidget ) - m_last->hide(); - raiseWidget( id ); -} - -/** - * This is overloaded and only differs in the parameters - * it takes. - */ -void OWidgetStack::hideWidget( QWidget* wid) { - /* still not smart */ - if ( m_mode == BigScreen && m_last != m_mWidget ) - m_last->hide(); - - raiseWidget( wid ); -} - - -bool OWidgetStack::eventFilter( QObject* obj, QEvent* e) { - qWarning(" %s %s", obj->name(), obj->className() ); - if ( e->type() == QEvent::Resize ) { - QResizeEvent *res = static_cast<QResizeEvent*>( e ); - QSize size = res->size(); - if ( size.width() >= mode_size ) - switchTop(); - else - switchStack(); - } - return false; -} - - -/** - * @internal_resons - */ -void OWidgetStack::resizeEvent( QResizeEvent* ev ) { - QFrame::resizeEvent( ev ); - if (m_mode == SmallScreen ) - m_stack->setGeometry( frameRect() ); - else - if (m_mWidget ) - m_mWidget->setGeometry( frameRect() ); - -} - -/** - * setMainWindow gives the OWidgetStack a hint which - * window should always stay inside the stack. - * Normally the first added widget is considered to be - * the mainwindow but you can change this with this - * function. - * If in BigScreen mode the current mainwindow will be reparented - * and hidden. The position will be taken by the new one. - * If the old MainWindow was hidden the new window will - * also be hidden. If the window was visible the new mainwindow - * will be made visible too and the old one hidden. If there - * was no mainwindow it will be hidden as well. - * - * @param wid The new mainwindow - */ -void OWidgetStack::setMainWindow( QWidget* wid ) { - if (m_mode == BigScreen ) { - bool wasVisible = false; - if (m_mWidget ) { - wasVisible = !m_mWidget->isHidden(); - /* hidden by default */ - m_mWidget->reparent(0, WType_TopLevel, QPoint(10, 10) ); - } - wid->reparent(this, 0, frameRect().topLeft() ); - - if (wasVisible) - wid->show(); - } - - m_mWidget = wid; -} - -/** - * this is an overloaded member and only differs - * in the type of arguments. - * @see setMainWindow(QWidget*) - */ -void OWidgetStack::setMainWindow( int id) { - setMainWindow( widget( id ) ); -} - - -/* - * this function switches to a stack ;) - */ -void OWidgetStack::switchStack() { - if (m_stack ) { - m_stack->setGeometry( frameRect() ); - return; - } - - m_mode = SmallScreen; - m_stack = new QWidgetStack(this); - - connect(m_stack, SIGNAL(aboutToShow(QWidget*) ), - this, SIGNAL(aboutToShow(QWidget*) ) ); - connect(m_stack, SIGNAL(aboutToShow(int) ), - this, SIGNAL(aboutToShow(int) ) ); - - /* now reparent the widgets... luckily QWidgetSatck does most of the work */ - if (m_list.isEmpty() ) - return; - - QMap<int, QWidget*>::Iterator it = m_list.begin(); - for ( ; it != m_list.end(); ++it ) - m_stack->addWidget( it.data(), it.key() ); - - -} - -/* - * we will switch to top level mode - * reparent the list of widgets and then delete the stack - */ -void OWidgetStack::switchTop() { - m_mode = BigScreen; - /* this works because it is guaranteed that switchStack was called at least once*/ - if (!m_stack && m_mWidget) { - m_mWidget->setGeometry( frameRect() ); - return; - }else if (!m_stack) - return; - - if (!m_list.isEmpty() ) { - QMap<int, QWidget*>::Iterator it = m_list.begin(); - for ( ; it != m_list.end(); ++it ) { - /* better than reparenting twice */ - if ( it.data() == m_mWidget ) { - m_mWidget->reparent(this, 0, frameRect().topLeft() ); - m_mWidget->setGeometry( frameRect() ); - m_mWidget->show(); - }else - /* ### FIXME we need to place the widget better */ - it.data()->reparent(0, WType_TopLevel, QPoint(10, 10) ); - } - } - - delete m_stack; - m_stack = 0; -} diff --git a/libopie/big-screen/owidgetstack.h b/libopie/big-screen/owidgetstack.h deleted file mode 100644 index 5179213..0000000 --- a/libopie/big-screen/owidgetstack.h +++ b/dev/null @@ -1,127 +0,0 @@ -/* - =. This file is part of the OPIE Project - .=l. Copyright (c) 2003 hOlgAr <zecke@handhelds.org> - .>+-= - _;:, .> :=|. This library is free software; you can -.> <`_, > . <= redistribute it and/or modify it under -:`=1 )Y*s>-.-- : the terms of the GNU Library General Public -.="- .-=="i, .._ License as published by the Free Software - - . .-<_> .<> Foundation; either version 2 of the License, - ._= =} : or (at your option) any later version. - .%`+i> _;_. - .i_,=:_. -<s. This library is distributed in the hope that - + . -:. = it will be useful, but WITHOUT ANY WARRANTY; - : .. .:, . . . without even the implied warranty of - =_ + =;=|` MERCHANTABILITY or FITNESS FOR A - _.=:. : :=>`: PARTICULAR PURPOSE. See the GNU -..}^=.= = ; Library General Public License for more -++= -. .` .: details. - : = ...= . :.=- - -. .:....=;==+<; You should have received a copy of the GNU - -_. . . )=. = Library General Public License along with - -- :-=` this library; see the file COPYING.LIB. - If not, write to the Free Software Foundation, - Inc., 59 Temple Place - Suite 330, - Boston, MA 02111-1307, USA. - -*/ - -#ifndef OPIE_BIG_WIDGET_STACK_H -#define OPIE_BIG_WIDGET_STACK_H - -#include <qframe.h> -#include <qmap.h> - -class QWidgetStack; -/** - * - * OWidgetStack is the answer to the problem of using Opie at different screen - * sizes and to have a different behaviour. Most applications use a QWidgetStack - * to supply a view on click. And by clicking the (X) you go back but this - * behaviour feels strange on bigger screens. It's ok on smaller one because - * one can't determine the difference. - * This stack reads the default out of the size of the desktop widget but - * can be forced to have either the one or the other behaviour. - * The first widget added is considered the 'main' widget and its - * sizeHint will be taking if in BigScreen mode. - * In small screen mode this widget behaves exactly like a QWidgetStack and in BigScreen - * mode it'll use the MainWindow as child of this widget and arranges the others as - * hidden top level widgets. - * - * @version 0.1 - * @author hOlgAr F. - * @short Either a true stack or a list of top Level widgets - */ -class OWidgetStack : public QFrame { - Q_OBJECT -public: - enum Mode { SmallScreen, BigScreen, NoForce }; - OWidgetStack( QWidget* parent, const char* name = 0, WFlags fl = 0 ); - ~OWidgetStack(); - - enum Mode mode()const; - void forceMode( enum Mode ); - - void addWidget( QWidget* , int ); - void removeWidget( QWidget* ); - -// QSizeHint sizeHint()const; -// QSizeHint minimumSizeHint()const; - - QWidget *widget( int )const; - int id( QWidget* )const; - - - - QWidget* visibleWidget() const; - - bool eventFilter( QObject*, QEvent* ); -signals: - /** - * OWidgetStack monitors the Desktop Widget for - * size changes if it recignizes a change size it'll - * send a signal and adjust its mode. After the signal - * was emitted. During the signal a call to mode() the - * old mode will be returned. Note that if a size change happens - * but no modeChange no signal will be emitted - * - * - * @param mode The new mode of the desktop - */ - void modeChanged( enum Mode mode); - - /** - * These two signals are emitted whenever we're about to - * show one of the widgets - */ - void aboutToShow( QWidget* ); - void aboutToShow( int ); - -public slots: - void raiseWidget( int ); - void raiseWidget( QWidget* ); - void hideWidget( int ); - void hideWidget( QWidget* ); - void setMainWindow( QWidget* ); - void setMainWindow( int ); - -protected: - void resizeEvent( QResizeEvent* ); - -private: - void switchStack(); - void switchTop(); - QMap<int, QWidget*> m_list; - QWidgetStack *m_stack; - QWidget *m_mWidget; - QWidget *m_last; - - enum Mode m_mode; - bool m_forced : 1; - - struct Private; - Private *d; -}; - - -#endif diff --git a/libopie/libopie.pro b/libopie/libopie.pro index a3d01ab..145743d 100644 --- a/libopie/libopie.pro +++ b/libopie/libopie.pro @@ -111,3 +111,2 @@ TARGET = opie -include ( big-screen/big-screen.pro ) |