2 files changed, 30 insertions, 21 deletions

diff --git a/libopie/odevice.cpp b/libopie/odevice.cpp
index 4b5a54e..4c33a0e 100644
--- a/libopie/odevice.cpp
+++ b/libopie/odevice.cpp
@@ -654,291 +654,287 @@ OSystem ODevice::system ( ) const
 QString ODevice::systemVersionString ( ) const
 {
         return d-> m_sysverstr;
 }
 
 /**
  *  @return the current Transformation
  */
 Transformation ODevice::rotation ( ) const
 {
         return d-> m_rotation;
 }
 
 /**
  *  @return the current rotation direction
  */
 ODirection ODevice::direction ( ) const
 {
         return d-> m_direction;
 }
 
 /**
  * This plays an alarmSound
  */
 void ODevice::alarmSound ( )
 {
 #ifndef QT_NO_SOUND
         static Sound snd ( "alarm" );
 
         if ( snd. isFinished ( ))
                 snd. play ( );
 #endif
 }
 
 /**
  * This plays a key sound
  */
 void ODevice::keySound ( )
 {
 #ifndef QT_NO_SOUND
         static Sound snd ( "keysound" );
 
         if ( snd. isFinished ( ))
                 snd. play ( );
 #endif
 }
 
 /**
  * This plays a touch sound
  */
 void ODevice::touchSound ( )
 {
 #ifndef QT_NO_SOUND
         static Sound snd ( "touchsound" );
 
         if ( snd. isFinished ( ))
                 snd. play ( );
 #endif
 }
 
 /**
  * This method will return a list of leds
  * available on this device
  * @return a list of LEDs.
  */
 QValueList <OLed> ODevice::ledList ( ) const
 {
         return QValueList <OLed> ( );
 }
 
 /**
  * This does return the state of the LEDs
  */
 QValueList <OLedState> ODevice::ledStateList ( OLed /*which*/ ) const
 {
         return QValueList <OLedState> ( );
 }
 
 /**
  * @return the state for a given OLed
  */
 OLedState ODevice::ledState ( OLed /*which*/ ) const
 {
         return Led_Off;
 }
 
 /**
  * Set the state for a LED
  * @param which Which OLed to use
  * @param st The state to set
  * @return success or failure
  */
 bool ODevice::setLedState ( OLed which, OLedState st )
 {
         Q_UNUSED( which )
         Q_UNUSED( st    )
         return false;
 }
 
 /**
  * @return if the device has a light sensor
  */
 bool ODevice::hasLightSensor ( ) const
 {
         return false;
 }
 
 /**
  * @return a value from the light senso
  */
 int ODevice::readLightSensor ( )
 {
         return -1;
 }
 
 /**
  * @return the light sensor resolution whatever that is ;)
  */
 int ODevice::lightSensorResolution ( ) const
 {
         return 0;
 }
 
 /**
  * @return a list with valid CPU frequency
  */
 QStrList &ODevice::cpuFrequencies ( ) const
 {
-qWarning("ODevice::cpuFrequencies: m_cpu_frequencies is %d", (int) d->m_cpu_frequencies);
         return *d->m_cpu_frequencies;
 }
 
 
 /**
  * Set desired cpu frequency
  * 
  * @param index index into d->m_cpu_frequencies of the frequency to be set
  */
 bool ODevice::setCpuFrequency(uint index)
 {
         if (index >= d->m_cpu_frequencies->count())
                 return false;
 
         char *freq = d->m_cpu_frequencies->at(index);
         qWarning("set freq to %s", freq);
 
-        //TODO: do the change in /proc/sys/cpu/0/speed
-
-        return false;
-}
+        int fd;
 
-/**
- * Returns current frequency index out of d->m_cpu_frequencies
- */
-uint ODevice::cpuFrequency() const
-{
-        // TODO: get freq from /proc/sys/cpu/0/speed and return index
+        if ((fd = ::open("/proc/sys/cpu/0/speed", O_WRONLY)) >= 0) {
+                char writeCommand[50];
+                const int count = sprintf(writeCommand, "%s\n", freq);
+                int res = (::write(fd, writeCommand, count) != -1);
+                ::close(fd);
+                return res;
+        }
 
-        return 0;
+        return false;
 }
 
 
-
 /**
  * @return a list of hardware buttons
  */
 const QValueList <ODeviceButton> &ODevice::buttons ( )
 {
         initButtons ( );
 
         return *d-> m_buttons;
 }
 
 /**
  * @return The amount of time that would count as a hold
  */
 uint ODevice::buttonHoldTime ( ) const
 {
         return d-> m_holdtime;
 }
 
 /**
  * This method return a ODeviceButton for a key code
  * or 0 if no special hardware button is available for the device
  *
  * @return The devicebutton or 0l
  * @see ODeviceButton
  */
 const ODeviceButton *ODevice::buttonForKeycode ( ushort code )
 {
         initButtons ( );
 
         for ( QValueListConstIterator<ODeviceButton> it = d-> m_buttons-> begin ( ); it != d-> m_buttons-> end ( ); ++it ) {
                 if ( (*it). keycode ( ) == code )
                         return &(*it);
         }
         return 0;
 }
 
 void ODevice::reloadButtonMapping ( )
 {
         initButtons ( );
 
         Config cfg ( "ButtonSettings" );
 
         for ( uint i = 0; i < d-> m_buttons-> count ( ); i++ ) {
                 ODeviceButton &b = ( *d-> m_buttons ) [i];
                 QString group = "Button" + QString::number ( i );
 
                 QCString pch, hch;
                 QCString pm, hm;
                 QByteArray pdata, hdata;
 
                 if ( cfg. hasGroup ( group )) {
                         cfg. setGroup ( group );
                         pch = cfg. readEntry ( "PressedActionChannel" ). latin1 ( );
                         pm  = cfg. readEntry ( "PressedActionMessage" ). latin1 ( );
                         // pdata = decodeBase64 ( buttonFile. readEntry ( "PressedActionArgs" ));
 
                         hch = cfg. readEntry ( "HeldActionChannel" ). latin1 ( );
                         hm  = cfg. readEntry ( "HeldActionMessage" ). latin1 ( );
                         // hdata = decodeBase64 ( buttonFile. readEntry ( "HeldActionArgs" ));
                 }
 
                 b. setPressedAction ( OQCopMessage ( pch, pm, pdata ));
 
                 b. setHeldAction ( OQCopMessage ( hch, hm, hdata ));
         }
 }
 
 void ODevice::remapPressedAction ( int button, const OQCopMessage &action )
 {
         initButtons ( );
 
         QString mb_chan;
 
         if ( button >= (int) d-> m_buttons-> count ( ))
                 return;
 
         ODeviceButton &b = ( *d-> m_buttons ) [button];
         b. setPressedAction ( action );
 
         mb_chan=b. pressedAction ( ). channel ( );
 
         Config buttonFile ( "ButtonSettings" );
         buttonFile. setGroup ( "Button" + QString::number ( button ));
         buttonFile. writeEntry ( "PressedActionChannel", (const char*) mb_chan);
         buttonFile. writeEntry ( "PressedActionMessage", (const char*) b. pressedAction ( ). message ( ));
 
         //buttonFile. writeEntry ( "PressedActionArgs", encodeBase64 ( b. pressedAction ( ). data ( )));
 
         QCopEnvelope ( "QPE/System", "deviceButtonMappingChanged()" );
 }
 
 void ODevice::remapHeldAction ( int button, const OQCopMessage &action )
 {
         initButtons ( );
 
         if ( button >= (int) d-> m_buttons-> count ( ))
                 return;
 
         ODeviceButton &b = ( *d-> m_buttons ) [button];
             b. setHeldAction ( action );
 
         Config buttonFile ( "ButtonSettings" );
         buttonFile. setGroup ( "Button" + QString::number ( button ));
         buttonFile. writeEntry ( "HeldActionChannel", (const char *) b. heldAction ( ). channel ( ));
         buttonFile. writeEntry ( "HeldActionMessage", (const char *) b. heldAction ( ). message ( ));
 
         //buttonFile. writeEntry ( "HeldActionArgs", decodeBase64 ( b. heldAction ( ). data ( )));
 
         QCopEnvelope ( "QPE/System", "deviceButtonMappingChanged()" );
 }
 
 
 
 
 /**************************************************
  *
  * iPAQ
  *
  **************************************************/
 
 void iPAQ::init ( )
 {
         d-> m_vendorstr = "HP";
         d-> m_vendor = Vendor_HP;
 
         QFile f ( "/proc/hal/model" );
 
         if ( f. open ( IO_ReadOnly )) {
@@ -1867,291 +1863,304 @@ void SIMpad::alarmSound ( )
 
         snd. play ( );
         while ( !snd. isFinished ( ))
                 qApp-> processEvents ( );
 
         if ( fd >= 0 ) {
                 if ( vol_reset )
                         ::ioctl ( fd, MIXER_WRITE( 0 ), &vol );
                 ::close ( fd );
         }
 #endif
 }
 
 
 bool SIMpad::suspend ( ) // Must override because SIMpad does NOT have apm
 {
         qDebug( "ODevice for SIMpad: suspend()" );
         if ( !isQWS( ) ) // only qwsserver is allowed to suspend
                 return false;
 
         bool res = false;
 
         struct timeval tvs, tvn;
         ::gettimeofday ( &tvs, 0 );
 
         ::sync ( ); // flush fs caches
         res = ( ::system ( "echo > /proc/sys/pm/suspend" ) == 0 ); //TODO make better :)
 
         return res;
 }
 
 
 bool SIMpad::setSoftSuspend ( bool soft )
 {
         qDebug( "ODevice for SIMpad: UNHANDLED setSoftSuspend(%s)", soft? "on" : "off" );
         return false;
 }
 
 
 bool SIMpad::setDisplayStatus ( bool on )
 {
         qDebug( "ODevice for SIMpad: setDisplayStatus(%s)", on? "on" : "off" );
 
         bool res = false;
         int fd;
 
         QString cmdline = QString().sprintf( "echo %s > /proc/cs3", on ? "0xd41a" : "0xd40a" ); //TODO make better :)
 
         if (( fd = ::open ( "/dev/fb0", O_RDWR )) >= 0 ) {
                 res = ( ::system( (const char*) cmdline ) == 0 );
                 ::close ( fd );
         }
         return res;
 }
 
 
 bool SIMpad::setDisplayBrightness ( int bright )
 {
         qDebug( "ODevice for SIMpad: setDisplayBrightness( %d )", bright );
         bool res = false;
         int fd;
 
         if ( bright > 255 )
                 bright = 255;
         if ( bright < 0 )
                 bright = 0;
 
         if (( fd = ::open ( SIMPAD_BACKLIGHT_CONTROL, O_WRONLY )) >= 0 ) {
                 int value = 255 - bright;
                 const int mask = SIMPAD_BACKLIGHT_MASK;
                 value = value << 8;
                 value += mask;
                 char writeCommand[100];
                 const int count = sprintf( writeCommand, "0x%x\n", value );
                 res = ( ::write ( fd, writeCommand, count ) != -1 );
                 ::close ( fd );
         }
         return res;
 }
 
 
 int SIMpad::displayBrightnessResolution ( ) const
 {
         switch ( model ( )) {
                 case Model_SIMpad_CL4:
                 case Model_SIMpad_SL4:
                 case Model_SIMpad_SLC:
                 case Model_SIMpad_TSinus:
                         return 255; //TODO find out if this is save
 
                 default:
                         return 2;
         }
 }
 
 /**************************************************
  *
  * Ramses
  *
  **************************************************/
 
 void Ramses::init()
 {
         d->m_vendorstr = "M und N";
         d->m_vendor = Vendor_MundN;
 
         QFile f("/proc/sys/board/ramses");
 
         d->m_modelstr = "Ramses";
         d->m_model = Model_Ramses_MNCI;
 
         d->m_rotation = Rot0;
         d->m_holdtime = 1000;
 
         f.setName("/etc/oz_version");
 
         if (f.open(IO_ReadOnly)) {
                    d->m_systemstr = "OpenEmbedded/Ramses";
                     d->m_system = System_OpenZaurus;
 
                 QTextStream ts(&f);
                 ts.setDevice(&f);
                 d->m_sysverstr = ts.readLine();
                 f.close();
         }
 
         m_power_timer = 0;
 
-qWarning("adding freq");
-        d->m_cpu_frequencies->append("100");
-        d->m_cpu_frequencies->append("200");
-        d->m_cpu_frequencies->append("300");
-        d->m_cpu_frequencies->append("400");
+#ifdef QT_QWS_ALLOW_OVERCLOCK
+#warning *** Overclocking enabled - this may fry your hardware - you have been warned ***
+#define OC(x...)        x
+#else
+#define OC(x...)
+#endif
+
+
+        // This table is true for a Intel XScale PXA 255
+
+        d->m_cpu_frequencies->append("99000");      // mem= 99, run= 99, turbo= 99, PXbus= 50
+        OC(d->m_cpu_frequencies->append("118000"); )   // mem=118, run=118, turbo=118, PXbus= 59 OC'd mem
+        d->m_cpu_frequencies->append("199100");     // mem= 99, run=199, turbo=199, PXbus= 99
+        OC(d->m_cpu_frequencies->append("236000"); )   // mem=118, run=236, turbo=236, PXbus=118 OC'd mem
+        d->m_cpu_frequencies->append("298600");     // mem= 99, run=199, turbo=298, PXbus= 99
+        OC(d->m_cpu_frequencies->append("354000"); )   // mem=118, run=236, turbo=354, PXbus=118 OC'd mem
+        d->m_cpu_frequencies->append("398099");     // mem= 99, run=199, turbo=398, PXbus= 99
+        d->m_cpu_frequencies->append("398100");     // mem= 99, run=398, turbo=398, PXbus=196
+        OC(d->m_cpu_frequencies->append("471000"); )   // mem=118, run=471, turbo=471, PXbus=236 OC'd mem/core/bus
+
 }
 
 bool Ramses::filter(int /*unicode*/, int keycode, int modifiers, bool isPress, bool autoRepeat)
 {
         Q_UNUSED( keycode );
         Q_UNUSED( modifiers );
         Q_UNUSED( isPress );
         Q_UNUSED( autoRepeat );
         return false;
 }
 
 void Ramses::timerEvent(QTimerEvent *)
 {
         killTimer(m_power_timer);
         m_power_timer = 0;
         QWSServer::sendKeyEvent(-1, HardKey_Backlight, 0, true, false);
         QWSServer::sendKeyEvent(-1, HardKey_Backlight, 0, false, false);
 }
 
 
 bool Ramses::setSoftSuspend(bool soft)
 {
         qDebug("Ramses::setSoftSuspend(%d)", soft);
 #if 0
         bool res = false;
         int fd;
 
         if (((fd = ::open("/dev/apm_bios", O_RDWR)) >= 0) ||
         ((fd = ::open("/dev/misc/apm_bios",O_RDWR)) >= 0)) {
 
                 int sources = ::ioctl(fd, APM_IOCGEVTSRC, 0); // get current event sources
 
                 if (sources >= 0) {
                         if (soft)
                                 sources &= ~APM_EVT_POWER_BUTTON;
                         else
                                 sources |= APM_EVT_POWER_BUTTON;
 
                         if (::ioctl(fd, APM_IOCSEVTSRC, sources) >= 0) // set new event sources
                                 res = true;
                         else
                                 perror("APM_IOCGEVTSRC");
                 }
                 else
                         perror("APM_IOCGEVTSRC");
 
                 ::close(fd);
         }
         else
                 perror("/dev/apm_bios or /dev/misc/apm_bios");
 
     return res;
 #else
     return true;
 #endif
 }
 
 bool Ramses::suspend ( )
 {
         qDebug("Ramses::suspend");
         return false;
 }
 
 /**
  * This sets the display on or off
  */
 bool Ramses::setDisplayStatus(bool on)
 {
         qDebug("Ramses::setDisplayStatus(%d)", on);
 #if 0
         bool res = false;
         int fd;
 
         if ((fd = ::open ("/dev/fb/0", O_RDWR)) >= 0) {
                 res = (::ioctl(fd, FBIOBLANK, on ? VESA_NO_BLANKING : VESA_POWERDOWN) == 0);
                 ::close(fd);
         }
         return res;
 #else
         return true;
 #endif
 }
 
 
 /*
  * We get something between 0..255 into us
 */
 bool Ramses::setDisplayBrightness(int bright)
 {
         qDebug("Ramses::setDisplayBrightness(%d)", bright);
         bool res = false;
         int fd;
 
         // pwm1 brighness: 20 steps 500..0 (dunkel->hell)
 
         if (bright > 255 )
                 bright = 255;
         if (bright < 0)
                 bright = 0;
 
         // Turn backlight completely off
         if ((fd = ::open("/proc/sys/board/lcd_backlight", O_WRONLY)) >= 0) {
                 char writeCommand[10];
                 const int count = sprintf(writeCommand, "%d\n", bright ? 1 : 0);
                 res = (::write(fd, writeCommand, count) != -1);
                 ::close(fd);
         }
 
         // scale backlight brightness to hardware
         bright = 500-(bright * 500 / 255);
         if ((fd = ::open("/proc/sys/board/pwm1", O_WRONLY)) >= 0) {
                 qDebug(" %d -> pwm1", bright);
                 char writeCommand[100];
                 const int count = sprintf(writeCommand, "%d\n", bright);
                 res = (::write(fd, writeCommand, count) != -1);
                 ::close(fd);
         }
         return res;
 }
 
 
 int Ramses::displayBrightnessResolution() const
 {
         return 32;
 }
 
 bool Ramses::setDisplayContrast(int contr)
 {
         qDebug("Ramses::setDisplayContrast(%d)", contr);
         bool res = false;
         int fd;
 
         // pwm0 contrast: 20 steps 79..90 (dunkel->hell)
 
         if (contr > 255 )
                 contr = 255;
         if (contr < 0)
                 contr = 0;
         contr = 90 - (contr * 20 / 255);
 
         if ((fd = ::open("/proc/sys/board/pwm0", O_WRONLY)) >= 0) {
                 qDebug(" %d -> pwm0", contr);
                 char writeCommand[100];
                 const int count = sprintf(writeCommand, "%d\n", contr);
                 res = (::write(fd, writeCommand, count) != -1);
                 res = true;
                 ::close(fd);
-        } else {
-                qWarning("no write");
         }
         return res;
 }
 
 
 int Ramses::displayContrastResolution() const
 {
         return 20;
 }
diff --git a/libopie/odevice.h b/libopie/odevice.h
index 7f6f856..18ff5f1 100644
--- a/libopie/odevice.h
+++ b/libopie/odevice.h
@@ -75,175 +75,175 @@ enum OModel {
 /**
  * The vendor of the device
  */
 enum OVendor {
         Vendor_Unknown,
 
         Vendor_HP,
         Vendor_Sharp,
         Vendor_SIEMENS,
         Vendor_MundN,
 };
 
 /**
  * The System used
  */
 enum OSystem {
         System_Unknown,
 
         System_Familiar,
         System_Zaurus,
         System_OpenZaurus
 };
 
 enum OLedState {
         Led_Off,
         Led_On,
         Led_BlinkSlow,
         Led_BlinkFast
 };
 
 enum OLed {
         Led_Mail,
         Led_Power,
         Led_BlueTooth
 };
 
 enum OHardKey {
         HardKey_Datebook  = Qt::Key_F9,
         HardKey_Contacts  = Qt::Key_F10,
         HardKey_Menu      = Qt::Key_F11,
         HardKey_Home      = Qt::Key_F12,
         HardKey_Mail      = Qt::Key_F13,
         HardKey_Record    = Qt::Key_F24,
         HardKey_Suspend   = Qt::Key_F34,
         HardKey_Backlight = Qt::Key_F35,
 };
 
 enum ODirection {
         CW   = 0,
         CCW  = 1,
         Flip = 2,
 };
 
 /**
  * A singleton which gives informations about device specefic option
  * like the Hardware used, LEDs, the Base Distribution and
  * hardware key mappings.
  *
  * @short A small class for device specefic options
  * @see QObject
  * @author Robert Griebl
  * @version 1.0
  */
 class ODevice : public QObject {
         Q_OBJECT
 
 private:
         /* disable copy */
         ODevice ( const ODevice & );
 
 protected:
         ODevice ( );
         virtual void init ( );
         virtual void initButtons ( );
 
         ODeviceData *d;
 
 public:
         // sandman do we want to allow destructions? -zecke?
         virtual ~ODevice ( );
 
         static ODevice *inst ( );
 
         // information
 
         QString modelString ( ) const;
         OModel model ( ) const;
         inline OModel series ( ) const { return (OModel) ( model ( ) & Model_Series_Mask ); }
 
         QString vendorString ( ) const;
         OVendor vendor ( ) const;
 
         QString systemString ( ) const;
         OSystem system ( ) const;
 
         QString systemVersionString ( ) const;
 
         Transformation rotation ( ) const;
         ODirection direction ( ) const;
 
 // system
 
         virtual bool setSoftSuspend ( bool on );
         virtual bool suspend ( );
 
         virtual bool setDisplayStatus ( bool on );
         virtual bool setDisplayBrightness ( int brightness );
         virtual int displayBrightnessResolution ( ) const;
         virtual bool setDisplayContrast ( int contrast );
         virtual int displayContrastResolution ( ) const;
 
 // input / output
         //FIXME playAlarmSound and al might be better -zecke
         virtual void alarmSound ( );
         virtual void keySound ( );
         virtual void touchSound ( );
 
         virtual QValueList <OLed> ledList ( ) const;
         virtual QValueList <OLedState> ledStateList ( OLed led ) const;
         virtual OLedState ledState ( OLed led ) const;
         virtual bool setLedState ( OLed led, OLedState st );
 
         virtual bool hasLightSensor ( ) const;
         virtual int readLightSensor ( );
         virtual int lightSensorResolution ( ) const;
 
         QStrList &cpuFrequencies() const;
         bool setCpuFrequency(uint index);
-        uint cpuFrequency() const;
+        int cpuFrequency() const;
 
         /**
          * Returns the available buttons on this device.  The number and location
          * of buttons will vary depending on the device.  Button numbers will be assigned
          * by the device manufacturer and will be from most preferred button to least preffered
          * button.  Note that this list only contains "user mappable" buttons.
          */
         const QValueList<ODeviceButton> &buttons ( );
 
         /**
          * Returns the DeviceButton for the \a keyCode.  If \a keyCode is not found, it
          * returns 0L
          */
         const ODeviceButton *buttonForKeycode ( ushort keyCode );
 
         /**
          * Reassigns the pressed action for \a button.  To return to the factory
          * default pass an empty string as \a qcopMessage.
          */
         void remapPressedAction ( int button, const OQCopMessage &qcopMessage );
 
         /**
          * Reassigns the held action for \a button.  To return to the factory
          * default pass an empty string as \a qcopMessage.
          */
         void remapHeldAction ( int button, const OQCopMessage &qcopMessage );
 
         /**
          * How long (in ms) you have to press a button for a "hold" action
          */
         uint buttonHoldTime ( ) const;
 
 signals:
         void buttonMappingChanged ( );
 
 private slots:
         void systemMessage ( const QCString &, const QByteArray & );
 
 protected:
         void reloadButtonMapping ( );
 };
 
 }
 
 #endif