2 files changed, 8 insertions, 5 deletions

diff --git a/libopie/odevice.cpp b/libopie/odevice.cpp
index 160568b..f808960 100644
--- a/libopie/odevice.cpp
+++ b/libopie/odevice.cpp
@@ -367,402 +367,406 @@ struct r_button {
 
 static QCString makeChannel ( const char *str )
 {
         if ( str && !::strchr ( str, '/' ))
                 return QCString ( "QPE/Application/" ) + str;
         else
                 return str;
 }
 
 static inline bool isQWS()
 {
         return qApp ? ( qApp-> type ( ) == QApplication::GuiServer ) : false;
 }
 
 ODevice *ODevice::inst ( )
 {
         static ODevice *dev = 0;
 
         if ( !dev ) {
                 if ( QFile::exists ( "/proc/hal/model" ))
                         dev = new iPAQ ( );
                 else if ( QFile::exists ( "/dev/sharp_buz" ) || QFile::exists ( "/dev/sharp_led" ))
                         dev = new Zaurus ( );
                 else if ( QFile::exists ( "/proc/ucb1x00" ) && QFile::exists ( "/proc/cs3" ))
                         dev = new SIMpad ( );
                 else if ( QFile::exists ( "/proc/sys/board/name" ))
                         dev = new Ramses ( );
                 else
                         dev = new ODevice ( );
 
                 dev-> init ( );
         }
         return dev;
 }
 
 
 /**************************************************
  *
  * common
  *
  **************************************************/
 
 
 ODevice::ODevice ( )
 {
         d = new ODeviceData;
 
         d-> m_modelstr = "Unknown";
         d-> m_model = Model_Unknown;
         d-> m_vendorstr = "Unknown";
         d-> m_vendor = Vendor_Unknown;
         d-> m_systemstr = "Unknown";
         d-> m_system = System_Unknown;
         d-> m_sysverstr = "0.0";
         d-> m_rotation = Rot0;
         d-> m_direction = CW;
 
         d-> m_holdtime = 1000; // 1000ms
         d-> m_buttons = 0;
 }
 
 void ODevice::systemMessage ( const QCString &msg, const QByteArray & )
 {
         if ( msg == "deviceButtonMappingChanged()" ) {
                 reloadButtonMapping ( );
         }
 }
 
 void ODevice::init ( )
 {
 }
 
 /**
  * This method initialises the  button mapping
  */
 void ODevice::initButtons ( )
 {
         if ( d-> m_buttons )
                 return;
 
         // Simulation uses iPAQ 3660 device buttons
 
         qDebug ( "init Buttons" );
         d-> m_buttons = new QValueList <ODeviceButton>;
 
         for ( uint i = 0; i < ( sizeof( ipaq_buttons ) / sizeof( i_button )); i++ ) {
                 i_button *ib = ipaq_buttons + i;
                 ODeviceButton b;
 
                 if (( ib-> model & Model_iPAQ_H36xx ) == Model_iPAQ_H36xx ) {
                         b. setKeycode ( ib-> code );
                         b. setUserText ( QObject::tr ( "Button", ib-> utext ));
                         b. setPixmap ( Resource::loadPixmap ( ib-> pix ));
                         b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( ib-> fpressedservice ), ib-> fpressedaction ));
                         b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( ib-> fheldservice ), ib-> fheldaction ));
                         d-> m_buttons-> append ( b );
                 }
         }
         reloadButtonMapping ( );
 
         QCopChannel *sysch = new QCopChannel ( "QPE/System", this );
         connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), this, SLOT( systemMessage ( const QCString &, const QByteArray & )));
 }
 
 ODevice::~ODevice ( )
 {
         delete d;
 }
 
 bool ODevice::setSoftSuspend ( bool /*soft*/ )
 {
         return false;
 }
 
 //#include <linux/apm_bios.h>
 
 #define APM_IOC_SUSPEND          OD_IO( 'A', 2 )
 
 /**
  * This method will try to suspend the device
  * It only works if the user is the QWS Server and the apm application
  * is installed.
  * It tries to suspend and then waits some time cause some distributions
  * do have asynchronus apm implementations.
  * This method will either fail and return false or it'll suspend the
  * device and return once the device got woken up
  *
  * @return if the device got suspended
  */
 bool ODevice::suspend ( )
 {
         qDebug("ODevice::suspend");
         if ( !isQWS( ) ) // only qwsserver is allowed to suspend
                 return false;
 
         if ( d-> m_model == Model_Unknown ) // better don't suspend in qvfb / on unkown devices
                 return false;
 
         bool res = false;
 
         struct timeval tvs, tvn;
         ::gettimeofday ( &tvs, 0 );
 
         ::sync ( ); // flush fs caches
         res = ( ::system ( "apm --suspend" ) == 0 );
 
         // This is needed because the iPAQ apm implementation is asynchronous and we
         // can not be sure when exactly the device is really suspended
         // This can be deleted as soon as a stable familiar with a synchronous apm implementation exists.
 
         if ( res ) {
                 do { // wait at most 1.5 sec: either suspend didn't work or the device resumed
                         ::usleep ( 200 * 1000 );
                         ::gettimeofday ( &tvn, 0 );
                 } while ((( tvn. tv_sec - tvs. tv_sec ) * 1000 + ( tvn. tv_usec - tvs. tv_usec ) / 1000 ) < 1500 );
         }
 
         return res;
 }
 
 //#include <linux/fb.h> better not rely on kernel headers in userspace ...
 
 #define FBIOBLANK             OD_IO( 'F', 0x11 ) // 0x4611
 
 /* VESA Blanking Levels */
 #define VESA_NO_BLANKING      0
 #define VESA_VSYNC_SUSPEND    1
 #define VESA_HSYNC_SUSPEND    2
 #define VESA_POWERDOWN        3
 
 /**
  * This sets the display on or off
  */
 bool ODevice::setDisplayStatus ( bool on )
 {
         qDebug("ODevice::setDisplayStatus(%d)", on);
 
         if ( d-> m_model == Model_Unknown )
                 return false;
 
         bool res = false;
         int fd;
 
         if (( fd = ::open ( "/dev/fb0", O_RDWR )) >= 0 ) {
                 res = ( ::ioctl ( fd, FBIOBLANK, on ? VESA_NO_BLANKING : VESA_POWERDOWN ) == 0 );
                 ::close ( fd );
         }
         return res;
 }
 
 /**
  * This sets the display brightness
+ *
+ * @param p The brightness to be set on a scale from 0 to 255
  * @return success or failure
  */
 bool ODevice::setDisplayBrightness ( int p)
 {
         Q_UNUSED( p )
         return false;
 }
 
 /**
- * @return return the max value for the brightness settings slider
+ * @return returns the number of steppings on the brightness slider
+ * in the Light-'n-Power settings.
  */
 int ODevice::displayBrightnessResolution ( ) const
 {
         return 16;
 }
 
 /**
  * This sets the display contrast
+ * @param p The contrast to be set on a scale from 0 to 255
  * @return success or failure
  */
 bool ODevice::setDisplayContrast ( int p)
 {
         Q_UNUSED( p )
         return false;
 }
 
 /**
  * @return return the max value for the brightness settings slider
  *         or 0 if the device doesn't support setting of a contrast
  */
 int ODevice::displayContrastResolution ( ) const
 {
         return 0;
 }
 
 /**
  * This returns the vendor as string
  * @return Vendor as QString
  */
 QString ODevice::vendorString ( ) const
 {
         return d-> m_vendorstr;
 }
 
 /**
  * This returns the vendor as one of the values of OVendor
  * @return OVendor
  */
 OVendor ODevice::vendor ( ) const
 {
         return d-> m_vendor;
 }
 
 /**
  * This returns the model as a string
  * @return A string representing the model
  */
 QString ODevice::modelString ( ) const
 {
         return d-> m_modelstr;
 }
 
 /**
  * This does return the OModel used
  */
 OModel ODevice::model ( ) const
 {
         return d-> m_model;
 }
 
 /**
  * This does return the systen name
  */
 QString ODevice::systemString ( ) const
 {
         return d-> m_systemstr;
 }
 
 /**
  * Return System as OSystem value
  */
 OSystem ODevice::system ( ) const
 {
         return d-> m_system;
 }
 
 /**
  * @return the version string of the base system
  */
 QString ODevice::systemVersionString ( ) const
 {
         return d-> m_sysverstr;
 }
 
 /**
  *  @return the current Transformation
  */
 Transformation ODevice::rotation ( ) const
 {
         return d-> m_rotation;
 }
 
 /**
  *  @return the current rotation direction
  */
 ODirection ODevice::direction ( ) const
 {
         return d-> m_direction;
 }
 
 /**
  * This plays an alarmSound
  */
 void ODevice::alarmSound ( )
 {
 #ifndef QT_NO_SOUND
         static Sound snd ( "alarm" );
 
         if ( snd. isFinished ( ))
                 snd. play ( );
 #endif
 }
 
 /**
  * This plays a key sound
  */
 void ODevice::keySound ( )
 {
 #ifndef QT_NO_SOUND
         static Sound snd ( "keysound" );
 
         if ( snd. isFinished ( ))
                 snd. play ( );
 #endif
 }
 
 /**
  * This plays a touch sound
  */
 void ODevice::touchSound ( )
 {
 #ifndef QT_NO_SOUND
         static Sound snd ( "touchsound" );
 
         if ( snd. isFinished ( ))
                 snd. play ( );
 #endif
 }
 
 /**
  * This method will return a list of leds
  * available on this device
  * @return a list of LEDs.
  */
 QValueList <OLed> ODevice::ledList ( ) const
 {
         return QValueList <OLed> ( );
 }
 
 /**
  * This does return the state of the LEDs
  */
 QValueList <OLedState> ODevice::ledStateList ( OLed /*which*/ ) const
 {
         return QValueList <OLedState> ( );
 }
 
 /**
  * @return the state for a given OLed
  */
 OLedState ODevice::ledState ( OLed /*which*/ ) const
 {
         return Led_Off;
 }
 
 /**
  * Set the state for a LED
  * @param which Which OLed to use
  * @param st The state to set
  * @return success or failure
  */
 bool ODevice::setLedState ( OLed which, OLedState st )
 {
         Q_UNUSED( which )
         Q_UNUSED( st    )
         return false;
 }
 
 /**
  * @return if the device has a light sensor
  */
 bool ODevice::hasLightSensor ( ) const
 {
         return false;
 }
 
 /**
  * @return a value from the light senso
  */
 int ODevice::readLightSensor ( )
 {
         return -1;
 }
 
 /**
  * @return the light sensor resolution whatever that is ;)
  */
 int ODevice::lightSensorResolution ( ) const
 {
         return 0;
@@ -1881,218 +1885,218 @@ bool SIMpad::setDisplayBrightness ( int bright )
         int fd;
 
         if ( bright > 255 )
                 bright = 255;
         if ( bright < 0 )
                 bright = 0;
 
         if (( fd = ::open ( SIMPAD_BACKLIGHT_CONTROL, O_WRONLY )) >= 0 ) {
                 int value = 255 - bright;
                 const int mask = SIMPAD_BACKLIGHT_MASK;
                 value = value << 8;
                 value += mask;
                 char writeCommand[100];
                 const int count = sprintf( writeCommand, "0x%x\n", value );
                 res = ( ::write ( fd, writeCommand, count ) != -1 );
                 ::close ( fd );
         }
         return res;
 }
 
 
 int SIMpad::displayBrightnessResolution ( ) const
 {
         switch ( model ( )) {
                 case Model_SIMpad_CL4:
                 case Model_SIMpad_SL4:
                 case Model_SIMpad_SLC:
                 case Model_SIMpad_TSinus:
                         return 255; //TODO find out if this is save
 
                 default:
                         return 2;
         }
 }
 
 /**************************************************
  *
  * Ramses
  *
  **************************************************/
 
 void Ramses::init()
 {
         d->m_vendorstr = "M und N";
         d->m_vendor = Vendor_MundN;
 
         QFile f("/proc/sys/board/ramses");
 
         d->m_modelstr = "Ramses";
         d->m_model = Model_Ramses_MNCI;
 
         d->m_rotation = Rot0;
         d->m_holdtime = 1000;
 
         f.setName("/etc/oz_version");
 
         if (f.open(IO_ReadOnly)) {
                    d->m_systemstr = "OpenEmbedded/Ramses";
                     d->m_system = System_OpenZaurus;
 
                 QTextStream ts(&f);
                 ts.setDevice(&f);
                 d->m_sysverstr = ts.readLine();
                 f.close();
         }
 
         m_power_timer = 0;
 
 }
 
 bool Ramses::filter(int /*unicode*/, int keycode, int modifiers, bool isPress, bool autoRepeat)
 {
         Q_UNUSED( keycode );
         Q_UNUSED( modifiers );
         Q_UNUSED( isPress );
         Q_UNUSED( autoRepeat );
         return false;
 }
 
 void Ramses::timerEvent(QTimerEvent *)
 {
         killTimer(m_power_timer);
         m_power_timer = 0;
         QWSServer::sendKeyEvent(-1, HardKey_Backlight, 0, true, false);
         QWSServer::sendKeyEvent(-1, HardKey_Backlight, 0, false, false);
 }
 
 
 bool Ramses::setSoftSuspend(bool soft)
 {
         qDebug("Ramses::setSoftSuspend(%d)", soft);
 #if 0
         bool res = false;
         int fd;
 
         if (((fd = ::open("/dev/apm_bios", O_RDWR)) >= 0) ||
         ((fd = ::open("/dev/misc/apm_bios",O_RDWR)) >= 0)) {
 
                 int sources = ::ioctl(fd, APM_IOCGEVTSRC, 0); // get current event sources
 
                 if (sources >= 0) {
                         if (soft)
                                 sources &= ~APM_EVT_POWER_BUTTON;
                         else
                                 sources |= APM_EVT_POWER_BUTTON;
 
                         if (::ioctl(fd, APM_IOCSEVTSRC, sources) >= 0) // set new event sources
                                 res = true;
                         else
                                 perror("APM_IOCGEVTSRC");
                 }
                 else
                         perror("APM_IOCGEVTSRC");
 
                 ::close(fd);
         }
         else
                 perror("/dev/apm_bios or /dev/misc/apm_bios");
 
     return res;
 #else
     return true;
 #endif
 }
 
 bool Ramses::suspend ( )
 {
         qDebug("Ramses::suspend");
 }
 
 /**
  * This sets the display on or off
  */
 bool Ramses::setDisplayStatus(bool on)
 {
         qDebug("Ramses::setDisplayStatus(%d)", on);
 #if 0
         bool res = false;
         int fd;
 
         if ((fd = ::open ("/dev/fb/0", O_RDWR)) >= 0) {
                 res = (::ioctl(fd, FBIOBLANK, on ? VESA_NO_BLANKING : VESA_POWERDOWN) == 0);
                 ::close(fd);
         }
         return res;
 #else
         return true;
 #endif
 }
 
 
 /*
  * We get something between 0..255 into us
 */
 bool Ramses::setDisplayBrightness(int bright)
 {
         qDebug("Ramses::setDisplayBrightness(%d)", bright);
         bool res = false;
         int fd;
 
         // pwm1 brighness: 20 steps 500..0 (dunkel->hell)
 
         if (bright > 255 )
                 bright = 255;
         if (bright < 0)
                 bright = 0;
         bright = 500-(bright * 500 / 255);
 
         if ((fd = ::open("/proc/sys/board/pwm1", O_WRONLY)) >= 0) {
                 qDebug(" %d -> pwm1", bright);
                 char writeCommand[100];
                 const int count = sprintf(writeCommand, "%d\n", bright);
                 res = (::write(fd, writeCommand, count) != -1);
                 ::close(fd);
         } else {
                 qWarning("no write");
         }
         return res;
 }
 
 
 int Ramses::displayBrightnessResolution() const
 {
         return 32;
 }
 
 bool Ramses::setDisplayContrast(int contr)
 {
         qDebug("Ramses::setDisplayContrast(%d)", contr);
         bool res = false;
         int fd;
 
-        // pwm0 contrast: 35 steps 65..100 (dunkel->hell)
+        // pwm0 contrast: 20 steps 79..90 (dunkel->hell)
 
         if (contr > 255 )
                 contr = 255;
         if (contr < 0)
                 contr = 0;
-        contr = 65 + (contr * 350 / 255);
+        contr = 90 - (contr * 20 / 255);
 
         if ((fd = ::open("/proc/sys/board/pwm0", O_WRONLY)) >= 0) {
                 qDebug(" %d -> pwm0", contr);
                 char writeCommand[100];
                 const int count = sprintf(writeCommand, "%d\n", contr);
                 res = (::write(fd, writeCommand, count) != -1);
                 res = true;
                 ::close(fd);
         } else {
                 qWarning("no write");
         }
         return res;
 }
 
 
 int Ramses::displayContrastResolution() const
 {
-        return 32;
+        return 20;
 }
diff --git a/libopie/odevice.h b/libopie/odevice.h
index 6c4830e..0974e8d 100644
--- a/libopie/odevice.h
+++ b/libopie/odevice.h
@@ -1,246 +1,245 @@
 /*  This file is part of the OPIE libraries
     Copyright (C) 2002 Robert Griebl (sandman@handhelds.org)
 
     This library is free software; you can redistribute it and/or
     modify it under the terms of the GNU Library General Public
     License as published by the Free Software Foundation; either
     version 2 of the License, or (at your option) any later version.
 
     This library is distributed in the hope that it will be useful,
     but WITHOUT ANY WARRANTY; without even the implied warranty of
     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
     Library General Public License for more details.
 
     You should have received a copy of the GNU Library General Public License
     along with this library; see the file COPYING.LIB.  If not, write to
     the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
     Boston, MA 02111-1307, USA.
 */
 
 #ifndef _LIBOPIE_ODEVICE_H_
 #define _LIBOPIE_ODEVICE_H_
 
 #include <qobject.h>
 #include <qstring.h>
 #include <qnamespace.h>
 
 #include <opie/odevicebutton.h>
 
 #include <qpe/qpeapplication.h> /* for Transformation enum.. */
 
 class ODeviceData;
 
 namespace Opie {
 
 /**
  * The available devices
  */
 enum OModel {
         Model_Unknown, // = 0
 
         Model_Series_Mask   = 0xff000000,
 
         Model_iPAQ          = ( 1 << 24 ),
 
         Model_iPAQ_All      = ( Model_iPAQ | 0xffffff ),
         Model_iPAQ_H31xx    = ( Model_iPAQ | 0x000001 ),
         Model_iPAQ_H36xx    = ( Model_iPAQ | 0x000002 ),
         Model_iPAQ_H37xx    = ( Model_iPAQ | 0x000004 ),
         Model_iPAQ_H38xx    = ( Model_iPAQ | 0x000008 ),
         Model_iPAQ_H39xx    = ( Model_iPAQ | 0x000010 ),
 
         Model_Zaurus        = ( 2 << 24 ),
 
         Model_Zaurus_SL5000 = ( Model_Zaurus | 0x000001 ),
         Model_Zaurus_SL5500 = ( Model_Zaurus | 0x000002 ),
         Model_Zaurus_SLA300 = ( Model_Zaurus | 0x000003 ),
         Model_Zaurus_SLB600 = ( Model_Zaurus | 0x000004 ),
         Model_Zaurus_SLC700 = ( Model_Zaurus | 0x000005 ),
 
         Model_SIMpad        = ( 3 << 24 ),
 
         Model_SIMpad_All    = ( Model_SIMpad | 0xffffff ),
         Model_SIMpad_CL4    = ( Model_SIMpad | 0x000001 ),
         Model_SIMpad_SL4    = ( Model_SIMpad | 0x000002 ),
         Model_SIMpad_SLC    = ( Model_SIMpad | 0x000004 ),
         Model_SIMpad_TSinus = ( Model_SIMpad | 0x000008 ),
 
         Model_Ramses        = ( 4 << 24 ),
 
         Model_Ramses_All    = ( Model_Ramses | 0xffffff ),
         Model_Ramses_MNCI   = ( Model_Ramses | 0x000001 ),
 };
 
 /**
  * The vendor of the device
  */
 enum OVendor {
         Vendor_Unknown,
 
         Vendor_HP,
         Vendor_Sharp,
         Vendor_SIEMENS,
         Vendor_MundN,
 };
 
 /**
  * The System used
  */
 enum OSystem {
         System_Unknown,
 
         System_Familiar,
         System_Zaurus,
         System_OpenZaurus
 };
 
 enum OLedState {
         Led_Off,
         Led_On,
         Led_BlinkSlow,
         Led_BlinkFast
 };
 
 enum OLed {
         Led_Mail,
         Led_Power,
         Led_BlueTooth
 };
 
 enum OHardKey {
         HardKey_Datebook  = Qt::Key_F9,
         HardKey_Contacts  = Qt::Key_F10,
         HardKey_Menu      = Qt::Key_F11,
         HardKey_Home      = Qt::Key_F12,
         HardKey_Mail      = Qt::Key_F13,
         HardKey_Record    = Qt::Key_F24,
         HardKey_Suspend   = Qt::Key_F34,
         HardKey_Backlight = Qt::Key_F35,
 };
 
 enum ODirection {
         CW   = 0,
         CCW  = 1,
         Flip = 2,
 };
 
 /**
  * A singleton which gives informations about device specefic option
  * like the Hardware used, LEDs, the Base Distribution and
  * hardware key mappings.
  *
- *
  * @short A small class for device specefic options
  * @see QObject
  * @author Robert Griebl
  * @version 1.0
  */
 class ODevice : public QObject {
         Q_OBJECT
 
 private:
         /* disable copy */
         ODevice ( const ODevice & );
 
 protected:
         ODevice ( );
         virtual void init ( );
         virtual void initButtons ( );
 
         ODeviceData *d;
 
 public:
     // sandman do we want to allow destructions? -zecke?
         virtual ~ODevice ( );
 
 
         static ODevice *inst ( );
 
 // information
 
         QString modelString ( ) const;
         OModel model ( ) const;
         inline OModel series ( ) const { return (OModel) ( model ( ) & Model_Series_Mask ); }
 
         QString vendorString ( ) const;
         OVendor vendor ( ) const;
 
         QString systemString ( ) const;
         OSystem system ( ) const;
 
         QString systemVersionString ( ) const;
 
         Transformation rotation ( ) const;
         ODirection direction ( ) const;
 
 // system
 
         virtual bool setSoftSuspend ( bool on );
         virtual bool suspend ( );
 
         virtual bool setDisplayStatus ( bool on );
         virtual bool setDisplayBrightness ( int brightness );
         virtual int displayBrightnessResolution ( ) const;
         virtual bool setDisplayContrast ( int contrast );
         virtual int displayContrastResolution ( ) const;
 
 // input / output
         //FIXME playAlarmSound and al might be better -zecke
         virtual void alarmSound ( );
         virtual void keySound ( );
         virtual void touchSound ( );
 
         virtual QValueList <OLed> ledList ( ) const;
         virtual QValueList <OLedState> ledStateList ( OLed led ) const;
         virtual OLedState ledState ( OLed led ) const;
         virtual bool setLedState ( OLed led, OLedState st );
 
         virtual bool hasLightSensor ( ) const;
         virtual int readLightSensor ( );
         virtual int lightSensorResolution ( ) const;
 
         /**
          * Returns the available buttons on this device.  The number and location
          * of buttons will vary depending on the device.  Button numbers will be assigned
          * by the device manufacturer and will be from most preferred button to least preffered
          * button.  Note that this list only contains "user mappable" buttons.
          */
         const QValueList<ODeviceButton> &buttons ( );
 
         /**
          * Returns the DeviceButton for the \a keyCode.  If \a keyCode is not found, it
          * returns 0L
          */
         const ODeviceButton *buttonForKeycode ( ushort keyCode );
 
         /**
          * Reassigns the pressed action for \a button.  To return to the factory
          * default pass an empty string as \a qcopMessage.
          */
         void remapPressedAction ( int button, const OQCopMessage &qcopMessage );
 
         /**
          * Reassigns the held action for \a button.  To return to the factory
          * default pass an empty string as \a qcopMessage.
          */
         void remapHeldAction ( int button, const OQCopMessage &qcopMessage );
 
         /**
          * How long (in ms) you have to press a button for a "hold" action
          */
         uint buttonHoldTime ( ) const;
 
 signals:
         void buttonMappingChanged ( );
 
 private slots:
         void systemMessage ( const QCString &, const QByteArray & );
 
 protected:
         void reloadButtonMapping ( );
 };
 
 }
 
 #endif