2 files changed, 12 insertions, 6 deletions

diff --git a/libopie/odevice.cpp b/libopie/odevice.cpp
index 9e97c56..d5e3c5c 100644
--- a/libopie/odevice.cpp
+++ b/libopie/odevice.cpp
@@ -235,97 +235,96 @@ ODevice *ODevice::inst ( )
  *
  * common
  *
  **************************************************/
 
 
 ODevice::ODevice ( )
 {
         d = new ODeviceData;
 
         d-> m_qwsserver = qApp ? ( qApp-> type ( ) == QApplication::GuiServer ) : false;
 
         d-> m_modelstr = "Unknown";
         d-> m_model = Model_Unknown;
         d-> m_vendorstr = "Unknown";
         d-> m_vendor = Vendor_Unknown;
         d-> m_systemstr = "Unknown";
         d-> m_system = System_Unknown;
         d-> m_sysverstr = "0.0";
         d-> m_rotation = Rot0;
         
         d-> m_holdtime = 1000; // 1000ms
         
         QCopChannel *sysch = new QCopChannel ( "QPE/System", this );
                 connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), this, SLOT( systemMessage ( const QCString &, const QByteArray & )));                            
 }
 
 void ODevice::systemMessage ( const QCString &msg, const QByteArray & )
 {
         if ( msg == "deviceButtonMappingChanged()" ) {
                 reloadButtonMapping ( );
         } 
 }
 
 void ODevice::init ( )
 {
         // Simulation uses iPAQ 3660 device buttons
 
         for ( uint i = 0; i < ( sizeof( ipaq_buttons ) / sizeof( i_button )); i++ ) {
                         i_button *ib = ipaq_buttons + i;
                 ODeviceButton b;
                 
                         if (( ib-> model & Model_iPAQ_H36xx ) == Model_iPAQ_H36xx ) {   
                         b. setKeycode ( ib-> code );
                         b. setUserText ( qApp-> translate ( "Button", ib-> utext ));
                         b. setPixmap ( Resource::loadPixmap ( ib-> pix ));
                         b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( ib-> fpressedservice ), ib-> fpressedaction ));
                         b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( ib-> fheldservice ), ib-> fheldaction ));
-                                        
                         d-> m_buttons. append ( b );
                 }
         }
         reloadButtonMapping ( );
 }
 
 ODevice::~ODevice ( )
 {
         delete d;
 }
 
 bool ODevice::setSoftSuspend ( bool /*soft*/ )
 {
         return false;
 }
 
 //#include <linux/apm_bios.h>
 
 #define APM_IOC_SUSPEND          OD_IO( 'A', 2 )
 
 
 bool ODevice::suspend ( )
 {
         if ( !d-> m_qwsserver ) // only qwsserver is allowed to suspend
                 return false;
 
         if ( d-> m_model == Model_Unknown ) // better don't suspend in qvfb / on unkown devices
                 return false;
 
         bool res = false;
         
         struct timeval tvs, tvn;
         ::gettimeofday ( &tvs, 0 );
         
         ::sync ( ); // flush fs caches
         res = ( ::system ( "apm --suspend" ) == 0 );
 
         // This is needed because the iPAQ apm implementation is asynchronous and we
         // can not be sure when exactly the device is really suspended
         // This can be deleted as soon as a stable familiar with a synchronous apm implementation exists.
 
                 if ( res ) {
                 do { // wait at most 1.5 sec: either suspend didn't work or the device resumed
                         ::usleep ( 200 * 1000 );
                                 ::gettimeofday ( &tvn, 0 );                     
                 } while ((( tvn. tv_sec - tvs. tv_sec ) * 1000 + ( tvn. tv_usec - tvs. tv_usec ) / 1000 ) < 1500 );
         }
         
@@ -471,127 +470,133 @@ int ODevice::readLightSensor ( )
 }
 
 int ODevice::lightSensorResolution ( ) const
 {
         return 0;
 }
 
 const QValueList <ODeviceButton> &ODevice::buttons ( ) const
 {
         return d-> m_buttons;
 }
 
 uint ODevice::buttonHoldTime ( ) const
 {
         return d-> m_holdtime;
 }
 
 const ODeviceButton *ODevice::buttonForKeycode ( ushort code )
 {
         for ( QValueListConstIterator<ODeviceButton> it = d-> m_buttons. begin ( ); it != d-> m_buttons. end ( ); ++it ) {
                 if ( (*it). keycode ( ) == code )
                         return &(*it);
         }
         return 0;
 }
 
 void ODevice::reloadButtonMapping ( )
 {
         Config cfg ( "ButtonSettings" );
         
         for ( uint i = 0; i < d-> m_buttons. count ( ); i++ ) {
                 ODeviceButton &b = d-> m_buttons [i];
                 QString group = "Button" + QString::number ( i );
 
                 QCString pch, hch;
                 QCString pm, hm;
                 QByteArray pdata, hdata;
                 
                 if ( cfg. hasGroup ( group )) {
                         cfg. setGroup ( group );
                         pch = cfg. readEntry ( "PressedActionChannel" ). latin1 ( );
                         pm  = cfg. readEntry ( "PressedActionMessage" ). latin1 ( );
                         // pdata = decodeBase64 ( buttonFile. readEntry ( "PressedActionArgs" ));
 
                         hch = cfg. readEntry ( "HeldActionChannel" ). latin1 ( );
                         hm  = cfg. readEntry ( "HeldActionMessage" ). latin1 ( );
                         // hdata = decodeBase64 ( buttonFile. readEntry ( "HeldActionArgs" ));
                 }
-                
+                                
                 b. setPressedAction ( OQCopMessage ( pch, pm, pdata ));
+                
                 b. setHeldAction ( OQCopMessage ( hch, hm, hdata ));
         }
 }
 
 void ODevice::remapPressedAction ( int button, const OQCopMessage &action )
 {
+        QString mb_chan;
+        
         if ( button >= (int) d-> m_buttons. count ( ))
                 return;
+        
                 
         ODeviceButton &b = d-> m_buttons [button];
-    b. setPressedAction ( action );
+        b. setPressedAction ( action );
+
+        mb_chan=b. pressedAction ( ). channel ( );
 
         Config buttonFile ( "ButtonSettings" );
         buttonFile. setGroup ( "Button" + QString::number ( button ));
-        buttonFile. writeEntry ( "PressedActionChannel", (const char*) b. pressedAction ( ). channel ( ));
+        buttonFile. writeEntry ( "PressedActionChannel", (const char*) mb_chan);
         buttonFile. writeEntry ( "PressedActionMessage", (const char*) b. pressedAction ( ). message ( ));
 
         //buttonFile. writeEntry ( "PressedActionArgs", encodeBase64 ( b. pressedAction ( ). data ( )));
 
         QCopEnvelope ( "QPE/System", "deviceButtonMappingChanged()" );
 }
 
 void ODevice::remapHeldAction ( int button, const OQCopMessage &action )
 {
         if ( button >= (int) d-> m_buttons. count ( ))
                 return;
                 
         ODeviceButton &b = d-> m_buttons [button];
-    b. setHeldAction ( action );
+            b. setHeldAction ( action );
 
         Config buttonFile ( "ButtonSettings" );
         buttonFile. setGroup ( "Button" + QString::number ( button ));
         buttonFile. writeEntry ( "HeldActionChannel", (const char *) b. heldAction ( ). channel ( ));
         buttonFile. writeEntry ( "HeldActionMessage", (const char *) b. heldAction ( ). message ( ));
 
         //buttonFile. writeEntry ( "HeldActionArgs", decodeBase64 ( b. heldAction ( ). data ( )));
 
         QCopEnvelope ( "QPE/System", "deviceButtonMappingChanged()" );
 }
 
 
 
 
 /**************************************************
  *
  * iPAQ
  *
  **************************************************/
 
 void iPAQ::init ( )
 {
         d-> m_vendorstr = "HP";
         d-> m_vendor = Vendor_HP;
 
         QFile f ( "/proc/hal/model" );
 
         if ( f. open ( IO_ReadOnly )) {
                 QTextStream ts ( &f );
 
                 d-> m_modelstr = "H" + ts. readLine ( );
 
                 if ( d-> m_modelstr == "H3100" )
                         d-> m_model = Model_iPAQ_H31xx;
                 else if ( d-> m_modelstr == "H3600" )
                         d-> m_model = Model_iPAQ_H36xx;
                 else if ( d-> m_modelstr == "H3700" )
                         d-> m_model = Model_iPAQ_H37xx;
                 else if ( d-> m_modelstr == "H3800" )
                         d-> m_model = Model_iPAQ_H38xx;
                 else if ( d-> m_modelstr == "H3900" )
                         d-> m_model = Model_iPAQ_H39xx;
                 else
                         d-> m_model = Model_Unknown;
 
                 f. close ( );
         }
 
diff --git a/libopie/odevicebutton.cpp b/libopie/odevicebutton.cpp
index 2270343..4b22358 100644
--- a/libopie/odevicebutton.cpp
+++ b/libopie/odevicebutton.cpp
@@ -25,97 +25,97 @@
 #include <opie/odevicebutton.h>
 
 using namespace Opie;
 
 
 class OQCopMessageData {
         public:
         QCString m_channel;
         QCString m_message;
         QByteArray m_data;
 };
 
 
 OQCopMessage::OQCopMessage ( ) 
         : d ( 0 )
 {
         init ( QCString ( ), QCString ( ), QByteArray ( ));
 }
 
 OQCopMessage::OQCopMessage ( const OQCopMessage &copy ) 
         : d ( 0 )
 {
         init ( copy. channel ( ), copy. message ( ), copy. data ( ));
 }
 
 OQCopMessage &OQCopMessage::operator = ( const OQCopMessage &assign )
 {
         init ( assign. channel ( ), assign. message ( ), assign. data ( ));
         return *this;
 }
 
 OQCopMessage::OQCopMessage ( const QCString &ch, const QCString &m, const QByteArray &arg ) 
         : d ( 0 )
 {
         init ( ch, m, arg );
 }
 
 void OQCopMessage::init ( const QCString &ch, const QCString &m, const QByteArray &arg )
 {
         if ( !d )
                 d = new OQCopMessageData ( );
         d-> m_channel = ch;
         d-> m_message = m;
         d-> m_data = arg;
 }
 
 bool OQCopMessage::send ( )
 {
-        if ( d-> m_channel. isEmpty ( ) || d-> m_message. isEmpty ( ))
+        if ( d-> m_channel. isEmpty ( ) || d-> m_message. isEmpty ( ) )
                 return false;
 
         QCopEnvelope e ( d-> m_channel, d-> m_message );
         
         if ( d-> m_data. size ( ))
                 e. writeRawBytes ( d-> m_data. data ( ), d-> m_data. size ( ));
 
         return true;
 }
 
 QCString OQCopMessage::channel ( ) const
 {
         return d-> m_channel;
 }
 
 QCString OQCopMessage::message ( ) const
 {
         return d-> m_message;
 }
 
 QByteArray OQCopMessage::data ( ) const
 {
         return d-> m_data;
 }
 
 void OQCopMessage::setChannel ( const QCString &ch )
 {
         d-> m_channel = ch;
 }
 
 void OQCopMessage::setMessage ( const QCString &m )
 {
         d-> m_message = m;
 }
 
 void OQCopMessage::setData ( const QByteArray &data )
 {
         d-> m_data = data;
 }
 
 /*! \class ODeviceButton
     \brief The ODeviceButton class represents a physical user mappable button on a Qtopia device.
 
     This class represents a physical button on a Qtopia device.    A
     device may have "user programmable" buttons.
     The location and number of buttons will vary from device to
     device.    userText() and pixmap() may be used to describe this button
     to the user in help documentation.
@@ -173,62 +173,63 @@ OQCopMessage ODeviceButton::factoryPresetPressedAction() const
  */
 OQCopMessage ODeviceButton::pressedAction() const
 {
     if (m_PressedAction.channel().isEmpty())
         return factoryPresetPressedAction();
     return m_PressedAction;
 }
 
 /*!
  This function returns the factory preset (default) action for when this button
  is pressed and held.    The return value is a legal QCop message.
  */
 OQCopMessage ODeviceButton::factoryPresetHeldAction() const
 {
     return m_FactoryPresetHeldAction;
 }
 
 /*!
  This function returns the user assigned action for when this button is pressed
  and held. If no action is assigned, factoryPresetAction() is returned.
  */
 OQCopMessage ODeviceButton::heldAction() const
 {
     if (m_HeldAction.channel().isEmpty())
         return factoryPresetHeldAction();
     return m_HeldAction;
 }
 
 void ODeviceButton::setKeycode(ushort keycode)
 {
     m_Keycode = keycode;
 }
 
 void ODeviceButton::setUserText(const QString& text)
 {
     m_UserText = text;
 }
 
 void ODeviceButton::setPixmap(const QPixmap& picture)
 {
     m_Pixmap = picture;
 }
 
 void ODeviceButton::setFactoryPresetPressedAction(const OQCopMessage& action)
 {
     m_FactoryPresetPressedAction = action;
 }
 
+
 void ODeviceButton::setPressedAction(const OQCopMessage& action)
 {
     m_PressedAction = action;
 }
 
 void ODeviceButton::setFactoryPresetHeldAction(const OQCopMessage& action)
 {
     m_FactoryPresetHeldAction = action;
 }
 
 void ODeviceButton::setHeldAction(const OQCopMessage& action)
 {
     m_HeldAction = action;
 }