1 files changed, 1 insertions, 1 deletions

diff --git a/library/qpeapplication.cpp b/library/qpeapplication.cpp
index 3370264..755fb19 100644
--- a/library/qpeapplication.cpp
+++ b/library/qpeapplication.cpp
@@ -168,385 +168,385 @@ public:
 
             // ugly hack, remove that later after finding a sane solution
             // Addendum: Only Sharp currently has models with high resolution but (physically) small displays,
             // so this is only useful if QT_QWS_SIMPAD is NOT defined. E.g. SIMpad has 800x600 but has
             // a (physically) large enough display to use the small icons
 #if defined(OPIE_HIGH_RES_SMALL_PHY)
             if ( QPEApplication::desktop() ->width() >= 600 && ( mw->inherits("QMainWindow") || mw->isA("QMainWindow") ) )  {
                 ( (  QMainWindow* ) mw )->setUsesBigPixmaps( true );
             }
 #endif
 
                 if ( mw->layout() && mw->inherits("QDialog") ) {
                         QPEApplication::showDialog((QDialog*)mw, nomaximize);
                 }
                 else {
 #ifdef Q_WS_QWS
                         if ( !nomaximize )
                                 mw->showMaximized();
                         else
 #endif
 
                                 mw->show();
                 }
         }
         static bool setWidgetCaptionFromAppName( QWidget* /*mw*/, const QString& /*appName*/, const QString& /*appsPath*/ )
         {
                 /*
                 // This works but disable it for now until it is safe to apply
                 // What is does is scan the .desktop files of all the apps for
                 // the applnk that has the corresponding argv[0] as this program
                 // then it uses the name stored in the .desktop file as the caption
                 // for the main widget. This saves duplicating translations for
                 // the app name in the program and in the .desktop files.
 
                 AppLnkSet apps( appsPath );
 
                 QList<AppLnk> appsList = apps.children();
                 for ( QListIterator<AppLnk> it(appsList); it.current(); ++it ) {
                   if ( (*it)->exec() == appName ) {
                 mw->setCaption( (*it)->name() );
                 return TRUE;
                   }
                 }
                 */
                 return FALSE;
         }
 
 
         void show(QWidget* mw, bool nomax)
         {
                 setWidgetCaptionFromAppName( mw, appName, QPEApplication::qpeDir() + "apps" );
                 nomaximize = nomax;
                 qpe_main_widget = mw;
                 qcopQok = TRUE;
 #ifndef QT_NO_COP
 
                 sendQCopQ();
 #endif
 
                 if ( preloaded ) {
                         if (forceshow)
                                 show_mx(mw, nomax);
                 }
                 else if ( keep_running ) {
                         show_mx(mw, nomax);
                 }
         }
 
         void loadTextCodecs()
         {
                 QString path = QPEApplication::qpeDir() + "/plugins/textcodecs";
 #ifdef Q_OS_MACX
                 QDir dir( path, "lib*.dylib" );
 #else
                 QDir dir( path, "lib*.so" );
 #endif
                 QStringList list;
                 if ( dir. exists ( ))
                     list = dir.entryList();
                 QStringList::Iterator it;
                 for ( it = list.begin(); it != list.end(); ++it ) {
                         TextCodecInterface *iface = 0;
                         QLibrary *lib = new QLibrary( path + "/" + *it );
                         if ( lib->queryInterface( IID_QtopiaTextCodec, (QUnknownInterface**)&iface ) == QS_OK && iface ) {
                                 QValueList<int> mibs = iface->mibEnums();
                                 for (QValueList<int>::ConstIterator i = mibs.begin(); i != mibs.end(); ++i) {
                                         (void)iface->createForMib(*i);
                                         // ### it exists now; need to remember if we can delete it
                                 }
                         }
                         else {
                                 lib->unload();
                                 delete lib;
                         }
                 }
         }
 
         void loadImageCodecs()
         {
                 QString path = QPEApplication::qpeDir() + "/plugins/imagecodecs";
 #ifdef Q_OS_MACX
                 QDir dir( path, "lib*.dylib" );
 #else
                 QDir dir( path, "lib*.so" );
 #endif
                 QStringList list;
                 if ( dir. exists ( ))
                     list = dir.entryList();
                 QStringList::Iterator it;
                 for ( it = list.begin(); it != list.end(); ++it ) {
                         ImageCodecInterface *iface = 0;
                         QLibrary *lib = new QLibrary( path + "/" + *it );
                         if ( lib->queryInterface( IID_QtopiaImageCodec, (QUnknownInterface**)&iface ) == QS_OK && iface ) {
                                 QStringList formats = iface->keys();
                                 for (QStringList::ConstIterator i = formats.begin(); i != formats.end(); ++i) {
                                         (void)iface->installIOHandler(*i);
                                         // ### it exists now; need to remember if we can delete it
                                 }
                         }
                         else {
                                 lib->unload();
                                 delete lib;
                         }
                 }
         }
 };
 
 class ResourceMimeFactory : public QMimeSourceFactory
 {
 public:
         ResourceMimeFactory() : resImage( 0 )
         {
                 setFilePath( Global::helpPath() );
                 setExtensionType( "html", "text/html;charset=UTF-8" );
         }
         ~ResourceMimeFactory() {
             delete resImage;
         }
 
         const QMimeSource* data( const QString& abs_name ) const
         {
                 const QMimeSource * r = QMimeSourceFactory::data( abs_name );
                 if ( !r ) {
                         int sl = abs_name.length();
                         do {
                                 sl = abs_name.findRev( '/', sl - 1 );
                                 QString name = sl >= 0 ? abs_name.mid( sl + 1 ) : abs_name;
                                 int dot = name.findRev( '.' );
                                 if ( dot >= 0 )
                                         name = name.left( dot );
                                 QImage img = Resource::loadImage( name );
                                 if ( !img.isNull() ) {
                                     delete resImage;
                                     resImage = new QImageDrag( img );
                                     r = resImage;
                                 }
                         }
                         while ( !r && sl > 0 );
                 }
                 return r;
         }
 private:
     mutable QImageDrag *resImage;
 };
 
 static int& hack(int& i)
 {
 #if QT_VERSION <= 230 && defined(QT_NO_CODECS)
     // These should be created, but aren't in Qt 2.3.0
     (void)new QUtf8Codec;
     (void)new QUtf16Codec;
 #endif
     return i;
 }
 
 static int muted = 0;
 static int micMuted = 0;
 
 static void setVolume( int t = 0, int percent = -1 )
 {
         switch ( t ) {
                 case 0: {
                                 Config cfg( "qpe" );
                                 cfg.setGroup( "Volume" );
                                 if ( percent < 0 )
                                         percent = cfg.readNumEntry( "VolumePercent", 50 );
 #ifndef QT_NO_SOUND
                                 int fd = 0;
                                 if ( ( fd = open( "/dev/mixer", O_RDWR ) ) >= 0 ) {
                                         int vol = muted ? 0 : percent;
                                         // set both channels to same volume
                                         vol |= vol << 8;
-                                        ioctl( fd, MIXER_WRITE( SOUND_MIXER_PCM ), &vol );
+                                        ioctl( fd, MIXER_WRITE( SOUND_MIXER_VOLUME ), &vol );
                                         ::close( fd );
                                 }
 #endif
                         }
                         break;
         }
 }
 
 static void setMic( int t = 0, int percent = -1 )
 {
         switch ( t ) {
                 case 0: {
                                 Config cfg( "qpe" );
                                 cfg.setGroup( "Volume" );
                                 if ( percent < 0 )
                                         percent = cfg.readNumEntry( "Mic", 50 );
 
 #ifndef QT_NO_SOUND
                                 int fd = 0;
                                 int mic = micMuted ? 0 : percent;
                                 if ( ( fd = open( "/dev/mixer", O_RDWR ) ) >= 0 ) {
                                         ioctl( fd, MIXER_WRITE( SOUND_MIXER_MIC ), &mic );
                                         ::close( fd );
                                 }
 #endif
                         }
                         break;
         }
 }
 
 
 static void setBass( int t = 0, int percent = -1 )
 {
         switch ( t ) {
                 case 0: {
                                 Config cfg( "qpe" );
                                 cfg.setGroup( "Volume" );
                                 if ( percent < 0 )
                                         percent = cfg.readNumEntry( "BassPercent", 50 );
 
 #ifndef QT_NO_SOUND
                                 int fd = 0;
                                 int bass = percent;
                                 if ( ( fd = open( "/dev/mixer", O_RDWR ) ) >= 0 ) {
                                         ioctl( fd, MIXER_WRITE( SOUND_MIXER_BASS ), &bass );
                                         ::close( fd );
                                 }
 #endif
                         }
                         break;
         }
 }
 
 
 static void setTreble( int t = 0, int percent = -1 )
 {
         switch ( t ) {
                 case 0: {
                                 Config cfg( "qpe" );
                                 cfg.setGroup( "Volume" );
                                 if ( percent < 0 )
                                         percent = cfg.readNumEntry( "TreblePercent", 50 );
 
 #ifndef QT_NO_SOUND
                                 int fd = 0;
                                 int treble = percent;
                                 if ( ( fd = open( "/dev/mixer", O_RDWR ) ) >= 0 ) {
                                         ioctl( fd, MIXER_WRITE( SOUND_MIXER_TREBLE ), &treble );
                                         ::close( fd );
                                 }
 #endif
                         }
                         break;
         }
 }
 
 
 /**
   \class QPEApplication
   \brief The QPEApplication class implements various system services
     that are available to all Qtopia applications.
 
   Simply by using QPEApplication instead of QApplication, a standard Qt
   application becomes a Qtopia application. It automatically follows
   style changes, quits and raises, and in the
   case of \link docwidget.html document-oriented\endlink applications,
   changes the currently displayed document in response to the environment.
 
   To create a \link docwidget.html document-oriented\endlink
   application use showMainDocumentWidget(); to create a
   non-document-oriented application use showMainWidget(). The
   keepRunning() function indicates whether the application will
   continue running after it's processed the last \link qcop.html
   QCop\endlink message. This can be changed using setKeepRunning().
 
   A variety of signals are emitted when certain events occur, for
   example, timeChanged(), clockChanged(), weekChanged(),
   dateFormatChanged() and volumeChanged(). If the application receives
   a \link qcop.html QCop\endlink message on the application's
   QPE/Application/\e{appname} channel, the appMessage() signal is
   emitted. There are also flush() and reload() signals, which
   are emitted when synching begins and ends respectively - upon these
   signals, the application should save and reload any data
   files that are involved in synching. Most of these signals will initially
   be received and unfiltered through the appMessage() signal.
 
   This class also provides a set of useful static functions. The
   qpeDir() and documentDir() functions return the respective paths.
   The grabKeyboard() and ungrabKeyboard() functions are used to
   control whether the application takes control of the device's
   physical buttons (e.g. application launch keys). The stylus' mode of
   operation is set with setStylusOperation() and retrieved with
   stylusOperation(). There are also setInputMethodHint() and
   inputMethodHint() functions.
 
   \ingroup qtopiaemb
 */
 
 /*!
   \fn void QPEApplication::clientMoused()
 
   \internal
 */
 
 /*!
   \fn void QPEApplication::timeChanged();
   This signal is emitted when the time changes outside the normal
   passage of time, i.e. if the time is set backwards or forwards.
 */
 
 /*!
   \fn void QPEApplication::clockChanged( bool ampm );
 
   This signal is emitted when the user changes the clock's style. If
   \a ampm is TRUE, the user wants a 12-hour AM/PM clock, otherwise,
   they want a 24-hour clock.
 */
 
 /*!
     \fn void QPEApplication::volumeChanged( bool muted )
 
     This signal is emitted whenever the mute state is changed. If \a
     muted is TRUE, then sound output has been muted.
 */
 
 /*!
     \fn void QPEApplication::weekChanged( bool startOnMonday )
 
     This signal is emitted if the week start day is changed. If \a
     startOnMonday is TRUE then the first day of the week is Monday; if
     \a startOnMonday is FALSE then the first day of the week is
     Sunday.
 */
 
 /*!
     \fn void QPEApplication::dateFormatChanged(DateFormat)
 
     This signal is emitted whenever the date format is changed.
 */
 
 /*!
     \fn void QPEApplication::flush()
 
     ###
 */
 
 /*!
   \fn void QPEApplication::reload()
 
 */
 
 
 
 void QPEApplication::processQCopFile()
 {
     QString qcopfn("/tmp/qcop-msg-");
     qcopfn += d->appName; // append command name
 
     QFile f(qcopfn);
     if ( f.open(IO_ReadWrite) ) {
 #ifndef Q_OS_WIN32
         flock(f.handle(), LOCK_EX);
 #endif
         QDataStream ds(&f);
         QCString channel, message;
         QByteArray data;
         while(!ds.atEnd()) {
             ds >> channel >> message >> data;
             d->enqueueQCop(channel,message,data);
         }
         ::ftruncate(f.handle(), 0);
 #ifndef Q_OS_WIN32