-rw-r--r-- | library/qpeapplication.cpp | 9 |
1 files changed, 1 insertions, 8 deletions
diff --git a/library/qpeapplication.cpp b/library/qpeapplication.cpp index c875ff2..86dbe85 100644 --- a/library/qpeapplication.cpp +++ b/library/qpeapplication.cpp | |||
@@ -536,1101 +536,1094 @@ static void setVolume( int t = 0, int percent = -1 ) | |||
536 | #ifndef QT_NO_SOUND | 536 | #ifndef QT_NO_SOUND |
537 | int fd = 0; | 537 | int fd = 0; |
538 | if ( ( fd = open( "/dev/mixer", O_RDWR ) ) >= 0 ) { | 538 | if ( ( fd = open( "/dev/mixer", O_RDWR ) ) >= 0 ) { |
539 | int vol = muted ? 0 : percent; | 539 | int vol = muted ? 0 : percent; |
540 | // set both channels to same volume | 540 | // set both channels to same volume |
541 | vol |= vol << 8; | 541 | vol |= vol << 8; |
542 | ioctl( fd, MIXER_WRITE( SOUND_MIXER_VOLUME ), &vol ); | 542 | ioctl( fd, MIXER_WRITE( SOUND_MIXER_VOLUME ), &vol ); |
543 | ::close( fd ); | 543 | ::close( fd ); |
544 | } | 544 | } |
545 | #endif | 545 | #endif |
546 | } | 546 | } |
547 | break; | 547 | break; |
548 | } | 548 | } |
549 | } | 549 | } |
550 | 550 | ||
551 | static void setMic( int t = 0, int percent = -1 ) | 551 | static void setMic( int t = 0, int percent = -1 ) |
552 | { | 552 | { |
553 | switch ( t ) { | 553 | switch ( t ) { |
554 | case 0: { | 554 | case 0: { |
555 | Config cfg( "qpe" ); | 555 | Config cfg( "qpe" ); |
556 | cfg.setGroup( "Volume" ); | 556 | cfg.setGroup( "Volume" ); |
557 | if ( percent < 0 ) | 557 | if ( percent < 0 ) |
558 | percent = cfg.readNumEntry( "Mic", 50 ); | 558 | percent = cfg.readNumEntry( "Mic", 50 ); |
559 | 559 | ||
560 | #ifndef QT_NO_SOUND | 560 | #ifndef QT_NO_SOUND |
561 | int fd = 0; | 561 | int fd = 0; |
562 | int mic = micMuted ? 0 : percent; | 562 | int mic = micMuted ? 0 : percent; |
563 | if ( ( fd = open( "/dev/mixer", O_RDWR ) ) >= 0 ) { | 563 | if ( ( fd = open( "/dev/mixer", O_RDWR ) ) >= 0 ) { |
564 | ioctl( fd, MIXER_WRITE( SOUND_MIXER_MIC ), &mic ); | 564 | ioctl( fd, MIXER_WRITE( SOUND_MIXER_MIC ), &mic ); |
565 | ::close( fd ); | 565 | ::close( fd ); |
566 | } | 566 | } |
567 | #endif | 567 | #endif |
568 | } | 568 | } |
569 | break; | 569 | break; |
570 | } | 570 | } |
571 | } | 571 | } |
572 | 572 | ||
573 | 573 | ||
574 | static void setBass( int t = 0, int percent = -1 ) | 574 | static void setBass( int t = 0, int percent = -1 ) |
575 | { | 575 | { |
576 | switch ( t ) { | 576 | switch ( t ) { |
577 | case 0: { | 577 | case 0: { |
578 | Config cfg( "qpe" ); | 578 | Config cfg( "qpe" ); |
579 | cfg.setGroup( "Volume" ); | 579 | cfg.setGroup( "Volume" ); |
580 | if ( percent < 0 ) | 580 | if ( percent < 0 ) |
581 | percent = cfg.readNumEntry( "BassPercent", 50 ); | 581 | percent = cfg.readNumEntry( "BassPercent", 50 ); |
582 | 582 | ||
583 | #ifndef QT_NO_SOUND | 583 | #ifndef QT_NO_SOUND |
584 | int fd = 0; | 584 | int fd = 0; |
585 | int bass = percent; | 585 | int bass = percent; |
586 | if ( ( fd = open( "/dev/mixer", O_RDWR ) ) >= 0 ) { | 586 | if ( ( fd = open( "/dev/mixer", O_RDWR ) ) >= 0 ) { |
587 | ioctl( fd, MIXER_WRITE( SOUND_MIXER_BASS ), &bass ); | 587 | ioctl( fd, MIXER_WRITE( SOUND_MIXER_BASS ), &bass ); |
588 | ::close( fd ); | 588 | ::close( fd ); |
589 | } | 589 | } |
590 | #endif | 590 | #endif |
591 | } | 591 | } |
592 | break; | 592 | break; |
593 | } | 593 | } |
594 | } | 594 | } |
595 | 595 | ||
596 | 596 | ||
597 | static void setTreble( int t = 0, int percent = -1 ) | 597 | static void setTreble( int t = 0, int percent = -1 ) |
598 | { | 598 | { |
599 | switch ( t ) { | 599 | switch ( t ) { |
600 | case 0: { | 600 | case 0: { |
601 | Config cfg( "qpe" ); | 601 | Config cfg( "qpe" ); |
602 | cfg.setGroup( "Volume" ); | 602 | cfg.setGroup( "Volume" ); |
603 | if ( percent < 0 ) | 603 | if ( percent < 0 ) |
604 | percent = cfg.readNumEntry( "TreblePercent", 50 ); | 604 | percent = cfg.readNumEntry( "TreblePercent", 50 ); |
605 | 605 | ||
606 | #ifndef QT_NO_SOUND | 606 | #ifndef QT_NO_SOUND |
607 | int fd = 0; | 607 | int fd = 0; |
608 | int treble = percent; | 608 | int treble = percent; |
609 | if ( ( fd = open( "/dev/mixer", O_RDWR ) ) >= 0 ) { | 609 | if ( ( fd = open( "/dev/mixer", O_RDWR ) ) >= 0 ) { |
610 | ioctl( fd, MIXER_WRITE( SOUND_MIXER_TREBLE ), &treble ); | 610 | ioctl( fd, MIXER_WRITE( SOUND_MIXER_TREBLE ), &treble ); |
611 | ::close( fd ); | 611 | ::close( fd ); |
612 | } | 612 | } |
613 | #endif | 613 | #endif |
614 | } | 614 | } |
615 | break; | 615 | break; |
616 | } | 616 | } |
617 | } | 617 | } |
618 | 618 | ||
619 | 619 | ||
620 | /** | 620 | /** |
621 | \class QPEApplication | 621 | \class QPEApplication |
622 | \brief The QPEApplication class implements various system services | 622 | \brief The QPEApplication class implements various system services |
623 | that are available to all Qtopia applications. | 623 | that are available to all Qtopia applications. |
624 | 624 | ||
625 | Simply by using QPEApplication instead of QApplication, a standard Qt | 625 | Simply by using QPEApplication instead of QApplication, a standard Qt |
626 | application becomes a Qtopia application. It automatically follows | 626 | application becomes a Qtopia application. It automatically follows |
627 | style changes, quits and raises, and in the | 627 | style changes, quits and raises, and in the |
628 | case of \link docwidget.html document-oriented\endlink applications, | 628 | case of \link docwidget.html document-oriented\endlink applications, |
629 | changes the currently displayed document in response to the environment. | 629 | changes the currently displayed document in response to the environment. |
630 | 630 | ||
631 | To create a \link docwidget.html document-oriented\endlink | 631 | To create a \link docwidget.html document-oriented\endlink |
632 | application use showMainDocumentWidget(); to create a | 632 | application use showMainDocumentWidget(); to create a |
633 | non-document-oriented application use showMainWidget(). The | 633 | non-document-oriented application use showMainWidget(). The |
634 | keepRunning() function indicates whether the application will | 634 | keepRunning() function indicates whether the application will |
635 | continue running after it's processed the last \link qcop.html | 635 | continue running after it's processed the last \link qcop.html |
636 | QCop\endlink message. This can be changed using setKeepRunning(). | 636 | QCop\endlink message. This can be changed using setKeepRunning(). |
637 | 637 | ||
638 | A variety of signals are emitted when certain events occur, for | 638 | A variety of signals are emitted when certain events occur, for |
639 | example, timeChanged(), clockChanged(), weekChanged(), | 639 | example, timeChanged(), clockChanged(), weekChanged(), |
640 | dateFormatChanged() and volumeChanged(). If the application receives | 640 | dateFormatChanged() and volumeChanged(). If the application receives |
641 | a \link qcop.html QCop\endlink message on the application's | 641 | a \link qcop.html QCop\endlink message on the application's |
642 | QPE/Application/\e{appname} channel, the appMessage() signal is | 642 | QPE/Application/\e{appname} channel, the appMessage() signal is |
643 | emitted. There are also flush() and reload() signals, which | 643 | emitted. There are also flush() and reload() signals, which |
644 | are emitted when synching begins and ends respectively - upon these | 644 | are emitted when synching begins and ends respectively - upon these |
645 | signals, the application should save and reload any data | 645 | signals, the application should save and reload any data |
646 | files that are involved in synching. Most of these signals will initially | 646 | files that are involved in synching. Most of these signals will initially |
647 | be received and unfiltered through the appMessage() signal. | 647 | be received and unfiltered through the appMessage() signal. |
648 | 648 | ||
649 | This class also provides a set of useful static functions. The | 649 | This class also provides a set of useful static functions. The |
650 | qpeDir() and documentDir() functions return the respective paths. | 650 | qpeDir() and documentDir() functions return the respective paths. |
651 | The grabKeyboard() and ungrabKeyboard() functions are used to | 651 | The grabKeyboard() and ungrabKeyboard() functions are used to |
652 | control whether the application takes control of the device's | 652 | control whether the application takes control of the device's |
653 | physical buttons (e.g. application launch keys). The stylus' mode of | 653 | physical buttons (e.g. application launch keys). The stylus' mode of |
654 | operation is set with setStylusOperation() and retrieved with | 654 | operation is set with setStylusOperation() and retrieved with |
655 | stylusOperation(). There are also setInputMethodHint() and | 655 | stylusOperation(). There are also setInputMethodHint() and |
656 | inputMethodHint() functions. | 656 | inputMethodHint() functions. |
657 | 657 | ||
658 | \ingroup qtopiaemb | 658 | \ingroup qtopiaemb |
659 | */ | 659 | */ |
660 | 660 | ||
661 | /*! | 661 | /*! |
662 | \fn void QPEApplication::clientMoused() | 662 | \fn void QPEApplication::clientMoused() |
663 | 663 | ||
664 | \internal | 664 | \internal |
665 | */ | 665 | */ |
666 | 666 | ||
667 | /*! | 667 | /*! |
668 | \fn void QPEApplication::timeChanged(); | 668 | \fn void QPEApplication::timeChanged(); |
669 | This signal is emitted when the time changes outside the normal | 669 | This signal is emitted when the time changes outside the normal |
670 | passage of time, i.e. if the time is set backwards or forwards. | 670 | passage of time, i.e. if the time is set backwards or forwards. |
671 | */ | 671 | */ |
672 | 672 | ||
673 | /*! | 673 | /*! |
674 | \fn void QPEApplication::clockChanged( bool ampm ); | 674 | \fn void QPEApplication::clockChanged( bool ampm ); |
675 | 675 | ||
676 | This signal is emitted when the user changes the clock's style. If | 676 | This signal is emitted when the user changes the clock's style. If |
677 | \a ampm is TRUE, the user wants a 12-hour AM/PM clock, otherwise, | 677 | \a ampm is TRUE, the user wants a 12-hour AM/PM clock, otherwise, |
678 | they want a 24-hour clock. | 678 | they want a 24-hour clock. |
679 | */ | 679 | */ |
680 | 680 | ||
681 | /*! | 681 | /*! |
682 | \fn void QPEApplication::volumeChanged( bool muted ) | 682 | \fn void QPEApplication::volumeChanged( bool muted ) |
683 | 683 | ||
684 | This signal is emitted whenever the mute state is changed. If \a | 684 | This signal is emitted whenever the mute state is changed. If \a |
685 | muted is TRUE, then sound output has been muted. | 685 | muted is TRUE, then sound output has been muted. |
686 | */ | 686 | */ |
687 | 687 | ||
688 | /*! | 688 | /*! |
689 | \fn void QPEApplication::weekChanged( bool startOnMonday ) | 689 | \fn void QPEApplication::weekChanged( bool startOnMonday ) |
690 | 690 | ||
691 | This signal is emitted if the week start day is changed. If \a | 691 | This signal is emitted if the week start day is changed. If \a |
692 | startOnMonday is TRUE then the first day of the week is Monday; if | 692 | startOnMonday is TRUE then the first day of the week is Monday; if |
693 | \a startOnMonday is FALSE then the first day of the week is | 693 | \a startOnMonday is FALSE then the first day of the week is |
694 | Sunday. | 694 | Sunday. |
695 | */ | 695 | */ |
696 | 696 | ||
697 | /*! | 697 | /*! |
698 | \fn void QPEApplication::dateFormatChanged(DateFormat) | 698 | \fn void QPEApplication::dateFormatChanged(DateFormat) |
699 | 699 | ||
700 | This signal is emitted whenever the date format is changed. | 700 | This signal is emitted whenever the date format is changed. |
701 | */ | 701 | */ |
702 | 702 | ||
703 | /*! | 703 | /*! |
704 | \fn void QPEApplication::flush() | 704 | \fn void QPEApplication::flush() |
705 | 705 | ||
706 | ### | 706 | ### |
707 | */ | 707 | */ |
708 | 708 | ||
709 | /*! | 709 | /*! |
710 | \fn void QPEApplication::reload() | 710 | \fn void QPEApplication::reload() |
711 | 711 | ||
712 | */ | 712 | */ |
713 | 713 | ||
714 | 714 | ||
715 | 715 | ||
716 | void QPEApplication::processQCopFile() | 716 | void QPEApplication::processQCopFile() |
717 | { | 717 | { |
718 | QString qcopfn("/tmp/qcop-msg-"); | 718 | QString qcopfn("/tmp/qcop-msg-"); |
719 | qcopfn += d->appName; // append command name | 719 | qcopfn += d->appName; // append command name |
720 | 720 | ||
721 | QFile f(qcopfn); | 721 | QFile f(qcopfn); |
722 | if ( f.open(IO_ReadWrite) ) { | 722 | if ( f.open(IO_ReadWrite) ) { |
723 | #ifndef Q_OS_WIN32 | 723 | #ifndef Q_OS_WIN32 |
724 | flock(f.handle(), LOCK_EX); | 724 | flock(f.handle(), LOCK_EX); |
725 | #endif | 725 | #endif |
726 | QDataStream ds(&f); | 726 | QDataStream ds(&f); |
727 | QCString channel, message; | 727 | QCString channel, message; |
728 | QByteArray data; | 728 | QByteArray data; |
729 | while(!ds.atEnd()) { | 729 | while(!ds.atEnd()) { |
730 | ds >> channel >> message >> data; | 730 | ds >> channel >> message >> data; |
731 | d->enqueueQCop(channel,message,data); | 731 | d->enqueueQCop(channel,message,data); |
732 | } | 732 | } |
733 | ::ftruncate(f.handle(), 0); | 733 | ::ftruncate(f.handle(), 0); |
734 | #ifndef Q_OS_WIN32 | 734 | #ifndef Q_OS_WIN32 |
735 | f.flush(); | 735 | f.flush(); |
736 | flock(f.handle(), LOCK_UN); | 736 | flock(f.handle(), LOCK_UN); |
737 | #endif | 737 | #endif |
738 | } | 738 | } |
739 | #endif | 739 | #endif |
740 | } | 740 | } |
741 | 741 | ||
742 | 742 | ||
743 | /*! | 743 | /*! |
744 | \fn void QPEApplication::appMessage( const QCString& msg, const QByteArray& data ) | 744 | \fn void QPEApplication::appMessage( const QCString& msg, const QByteArray& data ) |
745 | 745 | ||
746 | This signal is emitted when a message is received on this | 746 | This signal is emitted when a message is received on this |
747 | application's QPE/Application/<i>appname</i> \link qcop.html | 747 | application's QPE/Application/<i>appname</i> \link qcop.html |
748 | QCop\endlink channel. | 748 | QCop\endlink channel. |
749 | 749 | ||
750 | The slot to which you connect this signal uses \a msg and \a data | 750 | The slot to which you connect this signal uses \a msg and \a data |
751 | in the following way: | 751 | in the following way: |
752 | 752 | ||
753 | \code | 753 | \code |
754 | void MyWidget::receive( const QCString& msg, const QByteArray& data ) | 754 | void MyWidget::receive( const QCString& msg, const QByteArray& data ) |
755 | { | 755 | { |
756 | QDataStream stream( data, IO_ReadOnly ); | 756 | QDataStream stream( data, IO_ReadOnly ); |
757 | if ( msg == "someMessage(int,int,int)" ) { | 757 | if ( msg == "someMessage(int,int,int)" ) { |
758 | int a,b,c; | 758 | int a,b,c; |
759 | stream >> a >> b >> c; | 759 | stream >> a >> b >> c; |
760 | ... | 760 | ... |
761 | } else if ( msg == "otherMessage(QString)" ) { | 761 | } else if ( msg == "otherMessage(QString)" ) { |
762 | ... | 762 | ... |
763 | } | 763 | } |
764 | } | 764 | } |
765 | \endcode | 765 | \endcode |
766 | 766 | ||
767 | \sa qcop.html | 767 | \sa qcop.html |
768 | Note that messages received here may be processed by qpe application | 768 | Note that messages received here may be processed by qpe application |
769 | and emitted as signals, such as flush() and reload(). | 769 | and emitted as signals, such as flush() and reload(). |
770 | */ | 770 | */ |
771 | 771 | ||
772 | /*! | 772 | /*! |
773 | Constructs a QPEApplication just as you would construct | 773 | Constructs a QPEApplication just as you would construct |
774 | a QApplication, passing \a argc, \a argv, and \a t. | 774 | a QApplication, passing \a argc, \a argv, and \a t. |
775 | 775 | ||
776 | For applications, \a t should be the default, GuiClient. Only | 776 | For applications, \a t should be the default, GuiClient. Only |
777 | the Qtopia server passes GuiServer. | 777 | the Qtopia server passes GuiServer. |
778 | */ | 778 | */ |
779 | QPEApplication::QPEApplication( int & argc, char **argv, Type t ) | 779 | QPEApplication::QPEApplication( int & argc, char **argv, Type t ) |
780 | : QApplication( hack(argc), argv, t ), pidChannel( 0 ) | 780 | : QApplication( hack(argc), argv, t ), pidChannel( 0 ) |
781 | { | 781 | { |
782 | QPixmapCache::setCacheLimit(256); // sensible default for smaller devices. | 782 | QPixmapCache::setCacheLimit(256); // sensible default for smaller devices. |
783 | 783 | ||
784 | d = new QPEApplicationData; | 784 | d = new QPEApplicationData; |
785 | d->loadTextCodecs(); | 785 | d->loadTextCodecs(); |
786 | d->loadImageCodecs(); | 786 | d->loadImageCodecs(); |
787 | int dw = desktop() ->width(); | 787 | int dw = desktop() ->width(); |
788 | 788 | ||
789 | if ( dw < 200 ) { | 789 | if ( dw < 200 ) { |
790 | setFont( QFont( "vera", 8 ) ); | 790 | setFont( QFont( "vera", 8 ) ); |
791 | AppLnk::setSmallIconSize( 10 ); | 791 | AppLnk::setSmallIconSize( 10 ); |
792 | AppLnk::setBigIconSize( 28 ); | 792 | AppLnk::setBigIconSize( 28 ); |
793 | } | 793 | } |
794 | #if defined(OPIE_HIGH_RES_SMALL_PHY) | 794 | #if defined(OPIE_HIGH_RES_SMALL_PHY) |
795 | else if ( dw > 600 ) { | 795 | else if ( dw > 600 ) { |
796 | setFont( QFont( "vera", 16 ) ); | 796 | setFont( QFont( "vera", 16 ) ); |
797 | AppLnk::setSmallIconSize( 24 ); | 797 | AppLnk::setSmallIconSize( 24 ); |
798 | AppLnk::setBigIconSize( 48 ); | 798 | AppLnk::setBigIconSize( 48 ); |
799 | } | 799 | } |
800 | #endif | 800 | #endif |
801 | else if ( dw > 200 ) { | 801 | else if ( dw > 200 ) { |
802 | setFont( QFont( "vera", 10 ) ); | 802 | setFont( QFont( "vera", 10 ) ); |
803 | AppLnk::setSmallIconSize( 14 ); | 803 | AppLnk::setSmallIconSize( 14 ); |
804 | AppLnk::setBigIconSize( 32 ); | 804 | AppLnk::setBigIconSize( 32 ); |
805 | } | 805 | } |
806 | 806 | ||
807 | QMimeSourceFactory::setDefaultFactory( new ResourceMimeFactory ); | 807 | QMimeSourceFactory::setDefaultFactory( new ResourceMimeFactory ); |
808 | 808 | ||
809 | connect( this, SIGNAL( lastWindowClosed() ), this, SLOT( hideOrQuit() ) ); | 809 | connect( this, SIGNAL( lastWindowClosed() ), this, SLOT( hideOrQuit() ) ); |
810 | 810 | ||
811 | 811 | ||
812 | sysChannel = new QCopChannel( "QPE/System", this ); | 812 | sysChannel = new QCopChannel( "QPE/System", this ); |
813 | connect( sysChannel, SIGNAL( received(const QCString&,const QByteArray&) ), | 813 | connect( sysChannel, SIGNAL( received(const QCString&,const QByteArray&) ), |
814 | this, SLOT( systemMessage(const QCString&,const QByteArray&) ) ); | 814 | this, SLOT( systemMessage(const QCString&,const QByteArray&) ) ); |
815 | 815 | ||
816 | /* COde now in initapp */ | 816 | /* COde now in initapp */ |
817 | #if 0 | 817 | #if 0 |
818 | #if defined(Q_WS_QWS) && !defined(QT_NO_COP) | 818 | #if defined(Q_WS_QWS) && !defined(QT_NO_COP) |
819 | 819 | ||
820 | QString qcopfn( "/tmp/qcop-msg-" ); | 820 | QString qcopfn( "/tmp/qcop-msg-" ); |
821 | qcopfn += QString( argv[ 0 ] ); // append command name | 821 | qcopfn += QString( argv[ 0 ] ); // append command name |
822 | 822 | ||
823 | QFile f( qcopfn ); | 823 | QFile f( qcopfn ); |
824 | if ( f.open( IO_ReadOnly ) ) { | 824 | if ( f.open( IO_ReadOnly ) ) { |
825 | flock( f.handle(), LOCK_EX ); | 825 | flock( f.handle(), LOCK_EX ); |
826 | } | 826 | } |
827 | 827 | ||
828 | 828 | ||
829 | 829 | ||
830 | QCString channel = QCString( argv[ 0 ] ); | 830 | QCString channel = QCString( argv[ 0 ] ); |
831 | channel.replace( QRegExp( ".*/" ), "" ); | 831 | channel.replace( QRegExp( ".*/" ), "" ); |
832 | d->appName = channel; | 832 | d->appName = channel; |
833 | channel = "QPE/Application/" + channel; | 833 | channel = "QPE/Application/" + channel; |
834 | pidChannel = new QCopChannel( channel, this ); | 834 | pidChannel = new QCopChannel( channel, this ); |
835 | connect( pidChannel, SIGNAL( received(const QCString&,const QByteArray&) ), | 835 | connect( pidChannel, SIGNAL( received(const QCString&,const QByteArray&) ), |
836 | this, SLOT( pidMessage(const QCString&,const QByteArray&) ) ); | 836 | this, SLOT( pidMessage(const QCString&,const QByteArray&) ) ); |
837 | 837 | ||
838 | if ( f.isOpen() ) { | 838 | if ( f.isOpen() ) { |
839 | d->keep_running = FALSE; | 839 | d->keep_running = FALSE; |
840 | QDataStream ds( &f ); | 840 | QDataStream ds( &f ); |
841 | QCString channel, message; | 841 | QCString channel, message; |
842 | QByteArray data; | 842 | QByteArray data; |
843 | while ( !ds.atEnd() ) { | 843 | while ( !ds.atEnd() ) { |
844 | ds >> channel >> message >> data; | 844 | ds >> channel >> message >> data; |
845 | d->enqueueQCop( channel, message, data ); | 845 | d->enqueueQCop( channel, message, data ); |
846 | } | 846 | } |
847 | 847 | ||
848 | flock( f.handle(), LOCK_UN ); | 848 | flock( f.handle(), LOCK_UN ); |
849 | f.close(); | 849 | f.close(); |
850 | f.remove(); | 850 | f.remove(); |
851 | } | 851 | } |
852 | 852 | ||
853 | for ( int a = 0; a < argc; a++ ) { | 853 | for ( int a = 0; a < argc; a++ ) { |
854 | if ( qstrcmp( argv[ a ], "-preload" ) == 0 ) { | 854 | if ( qstrcmp( argv[ a ], "-preload" ) == 0 ) { |
855 | argv[ a ] = argv[ a + 1 ]; | 855 | argv[ a ] = argv[ a + 1 ]; |
856 | a++; | 856 | a++; |
857 | d->preloaded = TRUE; | 857 | d->preloaded = TRUE; |
858 | argc -= 1; | 858 | argc -= 1; |
859 | } | 859 | } |
860 | else if ( qstrcmp( argv[ a ], "-preload-show" ) == 0 ) { | 860 | else if ( qstrcmp( argv[ a ], "-preload-show" ) == 0 ) { |
861 | argv[ a ] = argv[ a + 1 ]; | 861 | argv[ a ] = argv[ a + 1 ]; |
862 | a++; | 862 | a++; |
863 | d->preloaded = TRUE; | 863 | d->preloaded = TRUE; |
864 | d->forceshow = TRUE; | 864 | d->forceshow = TRUE; |
865 | argc -= 1; | 865 | argc -= 1; |
866 | } | 866 | } |
867 | } | 867 | } |
868 | 868 | ||
869 | /* overide stored arguments */ | 869 | /* overide stored arguments */ |
870 | setArgs( argc, argv ); | 870 | setArgs( argc, argv ); |
871 | 871 | ||
872 | #endif | 872 | #endif |
873 | #else | 873 | #else |
874 | initApp( argc, argv ); | 874 | initApp( argc, argv ); |
875 | #endif | 875 | #endif |
876 | // qwsSetDecoration( new QPEDecoration() ); | 876 | // qwsSetDecoration( new QPEDecoration() ); |
877 | 877 | ||
878 | #ifndef QT_NO_TRANSLATION | 878 | #ifndef QT_NO_TRANSLATION |
879 | 879 | ||
880 | d->langs = Global::languageList(); | 880 | d->langs = Global::languageList(); |
881 | for ( QStringList::ConstIterator it = d->langs.begin(); it != d->langs.end(); ++it ) { | 881 | for ( QStringList::ConstIterator it = d->langs.begin(); it != d->langs.end(); ++it ) { |
882 | QString lang = *it; | 882 | QString lang = *it; |
883 | 883 | ||
884 | installTranslation( lang + "/libopie.qm"); | 884 | installTranslation( lang + "/libopie.qm"); |
885 | installTranslation( lang + "/libqpe.qm" ); | 885 | installTranslation( lang + "/libqpe.qm" ); |
886 | installTranslation( lang + "/" + d->appName + ".qm" ); | 886 | installTranslation( lang + "/" + d->appName + ".qm" ); |
887 | 887 | ||
888 | 888 | ||
889 | //###language/font hack; should look it up somewhere | 889 | //###language/font hack; should look it up somewhere |
890 | #ifdef QWS | 890 | #ifdef QWS |
891 | 891 | ||
892 | if ( lang == "ja" || lang == "zh_CN" || lang == "zh_TW" || lang == "ko" ) { | 892 | if ( lang == "ja" || lang == "zh_CN" || lang == "zh_TW" || lang == "ko" ) { |
893 | QFont fn = FontManager::unicodeFont( FontManager::Proportional ); | 893 | QFont fn = FontManager::unicodeFont( FontManager::Proportional ); |
894 | setFont( fn ); | 894 | setFont( fn ); |
895 | } | 895 | } |
896 | #endif | 896 | #endif |
897 | } | 897 | } |
898 | #endif | 898 | #endif |
899 | 899 | ||
900 | applyStyle(); | 900 | applyStyle(); |
901 | 901 | ||
902 | if ( type() == GuiServer ) { | 902 | if ( type() == GuiServer ) { |
903 | setVolume(); | 903 | setVolume(); |
904 | } | 904 | } |
905 | 905 | ||
906 | installEventFilter( this ); | 906 | installEventFilter( this ); |
907 | 907 | ||
908 | QPEMenuToolFocusManager::initialize(); | 908 | QPEMenuToolFocusManager::initialize(); |
909 | 909 | ||
910 | #ifdef QT_NO_QWS_CURSOR | 910 | #ifdef QT_NO_QWS_CURSOR |
911 | // if we have no cursor, probably don't want tooltips | 911 | // if we have no cursor, probably don't want tooltips |
912 | QToolTip::setEnabled( FALSE ); | 912 | QToolTip::setEnabled( FALSE ); |
913 | #endif | 913 | #endif |
914 | } | 914 | } |
915 | 915 | ||
916 | 916 | ||
917 | #ifdef QTOPIA_INTERNAL_INITAPP | 917 | #ifdef QTOPIA_INTERNAL_INITAPP |
918 | void QPEApplication::initApp( int argc, char **argv ) | 918 | void QPEApplication::initApp( int argc, char **argv ) |
919 | { | 919 | { |
920 | delete pidChannel; | 920 | delete pidChannel; |
921 | d->keep_running = TRUE; | 921 | d->keep_running = TRUE; |
922 | d->preloaded = FALSE; | 922 | d->preloaded = FALSE; |
923 | d->forceshow = FALSE; | 923 | d->forceshow = FALSE; |
924 | 924 | ||
925 | QCString channel = QCString(argv[0]); | 925 | QCString channel = QCString(argv[0]); |
926 | 926 | ||
927 | channel.replace(QRegExp(".*/"),""); | 927 | channel.replace(QRegExp(".*/"),""); |
928 | d->appName = channel; | 928 | d->appName = channel; |
929 | 929 | ||
930 | #if QT_VERSION > 235 | 930 | #if QT_VERSION > 235 |
931 | qt_fbdpy->setIdentity( channel ); // In Qt/E 2.3.6 | 931 | qt_fbdpy->setIdentity( channel ); // In Qt/E 2.3.6 |
932 | #endif | 932 | #endif |
933 | 933 | ||
934 | channel = "QPE/Application/" + channel; | 934 | channel = "QPE/Application/" + channel; |
935 | pidChannel = new QCopChannel( channel, this); | 935 | pidChannel = new QCopChannel( channel, this); |
936 | connect( pidChannel, SIGNAL(received(const QCString&,const QByteArray&)), | 936 | connect( pidChannel, SIGNAL(received(const QCString&,const QByteArray&)), |
937 | this, SLOT(pidMessage(const QCString&,const QByteArray&))); | 937 | this, SLOT(pidMessage(const QCString&,const QByteArray&))); |
938 | 938 | ||
939 | 939 | ||
940 | 940 | ||
941 | processQCopFile(); | 941 | processQCopFile(); |
942 | d->keep_running = d->qcopq.isEmpty(); | 942 | d->keep_running = d->qcopq.isEmpty(); |
943 | 943 | ||
944 | for (int a=0; a<argc; a++) { | 944 | for (int a=0; a<argc; a++) { |
945 | if ( qstrcmp(argv[a],"-preload")==0 ) { | 945 | if ( qstrcmp(argv[a],"-preload")==0 ) { |
946 | argv[a] = argv[a+1]; | 946 | argv[a] = argv[a+1]; |
947 | a++; | 947 | a++; |
948 | d->preloaded = TRUE; | 948 | d->preloaded = TRUE; |
949 | argc-=1; | 949 | argc-=1; |
950 | } else if ( qstrcmp(argv[a],"-preload-show")==0 ) { | 950 | } else if ( qstrcmp(argv[a],"-preload-show")==0 ) { |
951 | argv[a] = argv[a+1]; | 951 | argv[a] = argv[a+1]; |
952 | a++; | 952 | a++; |
953 | d->preloaded = TRUE; | 953 | d->preloaded = TRUE; |
954 | d->forceshow = TRUE; | 954 | d->forceshow = TRUE; |
955 | argc-=1; | 955 | argc-=1; |
956 | } | 956 | } |
957 | } | 957 | } |
958 | 958 | ||
959 | /* overide stored arguments */ | 959 | /* overide stored arguments */ |
960 | setArgs(argc, argv); | 960 | setArgs(argc, argv); |
961 | 961 | ||
962 | /* install translation here */ | 962 | /* install translation here */ |
963 | for ( QStringList::ConstIterator it = d->langs.begin(); it != d->langs.end(); ++it ) | 963 | for ( QStringList::ConstIterator it = d->langs.begin(); it != d->langs.end(); ++it ) |
964 | installTranslation( (*it) + "/" + d->appName + ".qm" ); | 964 | installTranslation( (*it) + "/" + d->appName + ".qm" ); |
965 | } | 965 | } |
966 | #endif | 966 | #endif |
967 | 967 | ||
968 | 968 | ||
969 | static QPtrDict<void>* inputMethodDict = 0; | 969 | static QPtrDict<void>* inputMethodDict = 0; |
970 | static void createInputMethodDict() | 970 | static void createInputMethodDict() |
971 | { | 971 | { |
972 | if ( !inputMethodDict ) | 972 | if ( !inputMethodDict ) |
973 | inputMethodDict = new QPtrDict<void>; | 973 | inputMethodDict = new QPtrDict<void>; |
974 | } | 974 | } |
975 | 975 | ||
976 | /*! | 976 | /*! |
977 | Returns the currently set hint to the system as to whether | 977 | Returns the currently set hint to the system as to whether |
978 | widget \a w has any use for text input methods. | 978 | widget \a w has any use for text input methods. |
979 | 979 | ||
980 | 980 | ||
981 | \sa setInputMethodHint() InputMethodHint | 981 | \sa setInputMethodHint() InputMethodHint |
982 | */ | 982 | */ |
983 | QPEApplication::InputMethodHint QPEApplication::inputMethodHint( QWidget * w ) | 983 | QPEApplication::InputMethodHint QPEApplication::inputMethodHint( QWidget * w ) |
984 | { | 984 | { |
985 | if ( inputMethodDict && w ) | 985 | if ( inputMethodDict && w ) |
986 | return ( InputMethodHint ) ( int ) inputMethodDict->find( w ); | 986 | return ( InputMethodHint ) ( int ) inputMethodDict->find( w ); |
987 | return Normal; | 987 | return Normal; |
988 | } | 988 | } |
989 | 989 | ||
990 | /*! | 990 | /*! |
991 | \enum QPEApplication::InputMethodHint | 991 | \enum QPEApplication::InputMethodHint |
992 | 992 | ||
993 | \value Normal the application sometimes needs text input (the default). | 993 | \value Normal the application sometimes needs text input (the default). |
994 | \value AlwaysOff the application never needs text input. | 994 | \value AlwaysOff the application never needs text input. |
995 | \value AlwaysOn the application always needs text input. | 995 | \value AlwaysOn the application always needs text input. |
996 | */ | 996 | */ |
997 | 997 | ||
998 | /*! | 998 | /*! |
999 | Hints to the system that widget \a w has use for text input methods | 999 | Hints to the system that widget \a w has use for text input methods |
1000 | as specified by \a mode. | 1000 | as specified by \a mode. |
1001 | 1001 | ||
1002 | \sa inputMethodHint() InputMethodHint | 1002 | \sa inputMethodHint() InputMethodHint |
1003 | */ | 1003 | */ |
1004 | void QPEApplication::setInputMethodHint( QWidget * w, InputMethodHint mode ) | 1004 | void QPEApplication::setInputMethodHint( QWidget * w, InputMethodHint mode ) |
1005 | { | 1005 | { |
1006 | createInputMethodDict(); | 1006 | createInputMethodDict(); |
1007 | if ( mode == Normal ) { | 1007 | if ( mode == Normal ) { |
1008 | inputMethodDict->remove | 1008 | inputMethodDict->remove |
1009 | ( w ); | 1009 | ( w ); |
1010 | } | 1010 | } |
1011 | else { | 1011 | else { |
1012 | inputMethodDict->insert( w, ( void* ) mode ); | 1012 | inputMethodDict->insert( w, ( void* ) mode ); |
1013 | } | 1013 | } |
1014 | } | 1014 | } |
1015 | 1015 | ||
1016 | class HackDialog : public QDialog | 1016 | class HackDialog : public QDialog |
1017 | { | 1017 | { |
1018 | public: | 1018 | public: |
1019 | void acceptIt() | 1019 | void acceptIt() |
1020 | { | 1020 | { |
1021 | accept(); | 1021 | accept(); |
1022 | } | 1022 | } |
1023 | void rejectIt() | 1023 | void rejectIt() |
1024 | { | 1024 | { |
1025 | reject(); | 1025 | reject(); |
1026 | } | 1026 | } |
1027 | }; | 1027 | }; |
1028 | 1028 | ||
1029 | 1029 | ||
1030 | void QPEApplication::mapToDefaultAction( QWSKeyEvent * ke, int key ) | 1030 | void QPEApplication::mapToDefaultAction( QWSKeyEvent * ke, int key ) |
1031 | { | 1031 | { |
1032 | // specialised actions for certain widgets. May want to | 1032 | // specialised actions for certain widgets. May want to |
1033 | // add more stuff here. | 1033 | // add more stuff here. |
1034 | if ( activePopupWidget() && activePopupWidget() ->inherits( "QListBox" ) | 1034 | if ( activePopupWidget() && activePopupWidget() ->inherits( "QListBox" ) |
1035 | && activePopupWidget() ->parentWidget() | 1035 | && activePopupWidget() ->parentWidget() |
1036 | && activePopupWidget() ->parentWidget() ->inherits( "QComboBox" ) ) | 1036 | && activePopupWidget() ->parentWidget() ->inherits( "QComboBox" ) ) |
1037 | key = Qt::Key_Return; | 1037 | key = Qt::Key_Return; |
1038 | 1038 | ||
1039 | if ( activePopupWidget() && activePopupWidget() ->inherits( "QPopupMenu" ) ) | 1039 | if ( activePopupWidget() && activePopupWidget() ->inherits( "QPopupMenu" ) ) |
1040 | key = Qt::Key_Return; | 1040 | key = Qt::Key_Return; |
1041 | 1041 | ||
1042 | #ifdef QWS | 1042 | #ifdef QWS |
1043 | 1043 | ||
1044 | ke->simpleData.keycode = key; | 1044 | ke->simpleData.keycode = key; |
1045 | #endif | 1045 | #endif |
1046 | } | 1046 | } |
1047 | 1047 | ||
1048 | // class HackWidget : public QWidget | ||
1049 | // { | ||
1050 | // public: | ||
1051 | // bool needsOk() | ||
1052 | // { | ||
1053 | // return ( getWState() & WState_Reserved1 ); | ||
1054 | // } | ||
1055 | // }; | ||
1056 | 1048 | ||
1057 | /*! | 1049 | /*! |
1058 | \internal | 1050 | \internal |
1059 | */ | 1051 | */ |
1060 | 1052 | ||
1061 | #ifdef QWS | 1053 | #ifdef QWS |
1062 | bool QPEApplication::qwsEventFilter( QWSEvent * e ) | 1054 | bool QPEApplication::qwsEventFilter( QWSEvent * e ) |
1063 | { | 1055 | { |
1064 | if ( !d->notbusysent && e->type == QWSEvent::Focus ) { | 1056 | if ( !d->notbusysent && e->type == QWSEvent::Focus ) { |
1065 | if ( qApp->type() != QApplication::GuiServer ) { | 1057 | if ( qApp->type() != QApplication::GuiServer ) { |
1066 | QCopEnvelope e( "QPE/System", "notBusy(QString)" ); | 1058 | QCopEnvelope e( "QPE/System", "notBusy(QString)" ); |
1067 | e << d->appName; | 1059 | e << d->appName; |
1068 | } | 1060 | } |
1069 | d->notbusysent = TRUE; | 1061 | d->notbusysent = TRUE; |
1070 | } | 1062 | } |
1071 | if ( type() == GuiServer ) { | 1063 | if ( type() == GuiServer ) { |
1072 | switch ( e->type ) { | 1064 | switch ( e->type ) { |
1073 | case QWSEvent::Mouse: | 1065 | case QWSEvent::Mouse: |
1074 | if ( e->asMouse() ->simpleData.state && !QWidget::find( e->window() ) ) | 1066 | if ( e->asMouse() ->simpleData.state && !QWidget::find( e->window() ) ) |
1075 | emit clientMoused(); | 1067 | emit clientMoused(); |
1076 | break; | 1068 | break; |
1077 | default: | 1069 | default: |
1078 | break; | 1070 | break; |
1079 | } | 1071 | } |
1080 | } | 1072 | } |
1081 | if ( e->type == QWSEvent::Key ) { | 1073 | if ( e->type == QWSEvent::Key ) { |
1082 | QWSKeyEvent *ke = ( QWSKeyEvent * ) e; | 1074 | QWSKeyEvent *ke = ( QWSKeyEvent * ) e; |
1083 | if ( ke->simpleData.keycode == Qt::Key_F33 ) { | 1075 | if ( ke->simpleData.keycode == Qt::Key_F33 ) { |
1084 | // Use special "OK" key to press "OK" on top level widgets | 1076 | // Use special "OK" key to press "OK" on top level widgets |
1085 | QWidget * active = activeWindow(); | 1077 | QWidget * active = activeWindow(); |
1086 | QWidget *popup = 0; | 1078 | QWidget *popup = 0; |
1087 | if ( active && active->isPopup() ) { | 1079 | if ( active && active->isPopup() ) { |
1088 | popup = active; | 1080 | popup = active; |
1089 | active = active->parentWidget(); | 1081 | active = active->parentWidget(); |
1090 | } | 1082 | } |
1091 | if ( active && ( int ) active->winId() == ke->simpleData.window && | 1083 | if ( active && ( int ) active->winId() == ke->simpleData.window && |
1092 | !active->testWFlags( WStyle_Customize | WType_Popup | WType_Desktop ) ) { | 1084 | !active->testWFlags( WStyle_Customize | WType_Popup | WType_Desktop ) ) { |
1093 | if ( ke->simpleData.is_press ) { | 1085 | if ( ke->simpleData.is_press ) { |
1094 | if ( popup ) | 1086 | if ( popup ) |
1095 | popup->close(); | 1087 | popup->close(); |
1096 | if ( active->inherits( "QDialog" ) ) { | 1088 | if ( active->inherits( "QDialog" ) ) { |
1097 | HackDialog * d = ( HackDialog * ) active; | 1089 | HackDialog * d = ( HackDialog * ) active; |
1098 | d->acceptIt(); | 1090 | d->acceptIt(); |
1099 | return TRUE; | 1091 | return TRUE; |
1100 | } | 1092 | } |
1101 | else if ( ( ( HackWidget * ) active ) ->needsOk() ) { | 1093 | else if ( ( ( HackWidget * ) active ) ->needsOk() ) { |
1102 | QSignal s; | 1094 | QSignal s; |
1103 | s.connect( active, SLOT( accept() ) ); | 1095 | s.connect( active, SLOT( accept() ) ); |
1104 | s.activate(); | 1096 | s.activate(); |
1105 | } | 1097 | } |
1106 | else { | 1098 | else { |
1107 | // do the same as with the select key: Map to the default action of the widget: | 1099 | // do the same as with the select key: Map to the default action of the widget: |
1108 | mapToDefaultAction( ke, Qt::Key_Return ); | 1100 | mapToDefaultAction( ke, Qt::Key_Return ); |
1109 | } | 1101 | } |
1110 | } | 1102 | } |
1111 | } | 1103 | } |
1112 | } | 1104 | } |
1113 | else if ( ke->simpleData.keycode == Qt::Key_F30 ) { | 1105 | else if ( ke->simpleData.keycode == Qt::Key_F30 ) { |
1114 | // Use special "select" key to do whatever default action a widget has | 1106 | // Use special "select" key to do whatever default action a widget has |
1115 | mapToDefaultAction( ke, Qt::Key_Space ); | 1107 | mapToDefaultAction( ke, Qt::Key_Space ); |
1116 | } | 1108 | } |
1117 | else if ( ke->simpleData.keycode == Qt::Key_Escape && | 1109 | else if ( ke->simpleData.keycode == Qt::Key_Escape && |
1118 | ke->simpleData.is_press ) { | 1110 | ke->simpleData.is_press ) { |
1119 | // Escape key closes app if focus on toplevel | 1111 | // Escape key closes app if focus on toplevel |
1120 | QWidget * active = activeWindow(); | 1112 | QWidget * active = activeWindow(); |
1121 | if ( active && active->testWFlags( WType_TopLevel ) && | 1113 | if ( active && active->testWFlags( WType_TopLevel ) && |
1122 | ( int ) active->winId() == ke->simpleData.window && | 1114 | ( int ) active->winId() == ke->simpleData.window && |
1123 | !active->testWFlags( WStyle_Dialog | WStyle_Customize | WType_Popup | WType_Desktop ) ) { | 1115 | !active->testWFlags( WStyle_Dialog | WStyle_Customize | WType_Popup | WType_Desktop ) ) { |
1124 | if ( active->inherits( "QDialog" ) ) { | 1116 | if ( active->inherits( "QDialog" ) ) { |
1117 | qDebug("dialog hack"); | ||
1125 | HackDialog * d = ( HackDialog * ) active; | 1118 | HackDialog * d = ( HackDialog * ) active; |
1126 | d->rejectIt(); | 1119 | d->rejectIt(); |
1127 | return TRUE; | 1120 | return TRUE; |
1128 | } | 1121 | } |
1129 | } | 1122 | } |
1130 | } | 1123 | } |
1131 | else if ( ke->simpleData.keycode >= Qt::Key_F1 && ke->simpleData.keycode <= Qt::Key_F29 ) { | 1124 | else if ( ke->simpleData.keycode >= Qt::Key_F1 && ke->simpleData.keycode <= Qt::Key_F29 ) { |
1132 | // this should be if ( ODevice::inst ( )-> buttonForKeycode ( ... )) | 1125 | // this should be if ( ODevice::inst ( )-> buttonForKeycode ( ... )) |
1133 | // but we cannot access libopie function within libqpe :( | 1126 | // but we cannot access libopie function within libqpe :( |
1134 | 1127 | ||
1135 | QWidget * active = activeWindow ( ); | 1128 | QWidget * active = activeWindow ( ); |
1136 | if ( active && ((int) active-> winId ( ) == ke-> simpleData.window )) { | 1129 | if ( active && ((int) active-> winId ( ) == ke-> simpleData.window )) { |
1137 | if ( d-> kbgrabbed ) { // we grabbed the keyboard | 1130 | if ( d-> kbgrabbed ) { // we grabbed the keyboard |
1138 | QChar ch ( ke-> simpleData.unicode ); | 1131 | QChar ch ( ke-> simpleData.unicode ); |
1139 | QKeyEvent qke ( ke-> simpleData. is_press ? QEvent::KeyPress : QEvent::KeyRelease, | 1132 | QKeyEvent qke ( ke-> simpleData. is_press ? QEvent::KeyPress : QEvent::KeyRelease, |
1140 | ke-> simpleData.keycode, | 1133 | ke-> simpleData.keycode, |
1141 | ch. latin1 ( ), | 1134 | ch. latin1 ( ), |
1142 | ke-> simpleData.modifiers, | 1135 | ke-> simpleData.modifiers, |
1143 | QString ( ch ), | 1136 | QString ( ch ), |
1144 | ke-> simpleData.is_auto_repeat, 1 ); | 1137 | ke-> simpleData.is_auto_repeat, 1 ); |
1145 | 1138 | ||
1146 | QObject *which = QWidget::keyboardGrabber ( ); | 1139 | QObject *which = QWidget::keyboardGrabber ( ); |
1147 | if ( !which ) | 1140 | if ( !which ) |
1148 | which = QApplication::focusWidget ( ); | 1141 | which = QApplication::focusWidget ( ); |
1149 | if ( !which ) | 1142 | if ( !which ) |
1150 | which = QApplication::activeWindow ( ); | 1143 | which = QApplication::activeWindow ( ); |
1151 | if ( !which ) | 1144 | if ( !which ) |
1152 | which = qApp; | 1145 | which = qApp; |
1153 | 1146 | ||
1154 | QApplication::sendEvent ( which, &qke ); | 1147 | QApplication::sendEvent ( which, &qke ); |
1155 | } | 1148 | } |
1156 | else { // we didn't grab the keyboard, so send the event to the launcher | 1149 | else { // we didn't grab the keyboard, so send the event to the launcher |
1157 | QCopEnvelope e ( "QPE/Launcher", "deviceButton(int,int,int)" ); | 1150 | QCopEnvelope e ( "QPE/Launcher", "deviceButton(int,int,int)" ); |
1158 | e << int( ke-> simpleData.keycode ) << int( ke-> simpleData. is_press ) << int( ke-> simpleData.is_auto_repeat ); | 1151 | e << int( ke-> simpleData.keycode ) << int( ke-> simpleData. is_press ) << int( ke-> simpleData.is_auto_repeat ); |
1159 | } | 1152 | } |
1160 | } | 1153 | } |
1161 | return true; | 1154 | return true; |
1162 | } | 1155 | } |
1163 | } | 1156 | } |
1164 | if ( e->type == QWSEvent::Focus ) { | 1157 | if ( e->type == QWSEvent::Focus ) { |
1165 | QWSFocusEvent * fe = ( QWSFocusEvent* ) e; | 1158 | QWSFocusEvent * fe = ( QWSFocusEvent* ) e; |
1166 | if ( !fe->simpleData.get_focus ) { | 1159 | if ( !fe->simpleData.get_focus ) { |
1167 | QWidget * active = activeWindow(); | 1160 | QWidget * active = activeWindow(); |
1168 | while ( active && active->isPopup() ) { | 1161 | while ( active && active->isPopup() ) { |
1169 | active->close(); | 1162 | active->close(); |
1170 | active = activeWindow(); | 1163 | active = activeWindow(); |
1171 | } | 1164 | } |
1172 | } | 1165 | } |
1173 | else { | 1166 | else { |
1174 | // make sure our modal widget is ALWAYS on top | 1167 | // make sure our modal widget is ALWAYS on top |
1175 | QWidget *topm = activeModalWidget(); | 1168 | QWidget *topm = activeModalWidget(); |
1176 | if ( topm && static_cast<int>( topm->winId() ) != fe->simpleData.window) { | 1169 | if ( topm && static_cast<int>( topm->winId() ) != fe->simpleData.window) { |
1177 | topm->raise(); | 1170 | topm->raise(); |
1178 | } | 1171 | } |
1179 | } | 1172 | } |
1180 | if ( fe->simpleData.get_focus && inputMethodDict ) { | 1173 | if ( fe->simpleData.get_focus && inputMethodDict ) { |
1181 | InputMethodHint m = inputMethodHint( QWidget::find( e->window() ) ); | 1174 | InputMethodHint m = inputMethodHint( QWidget::find( e->window() ) ); |
1182 | if ( m == AlwaysOff ) | 1175 | if ( m == AlwaysOff ) |
1183 | Global::hideInputMethod(); | 1176 | Global::hideInputMethod(); |
1184 | if ( m == AlwaysOn ) | 1177 | if ( m == AlwaysOn ) |
1185 | Global::showInputMethod(); | 1178 | Global::showInputMethod(); |
1186 | } | 1179 | } |
1187 | } | 1180 | } |
1188 | 1181 | ||
1189 | 1182 | ||
1190 | return QApplication::qwsEventFilter( e ); | 1183 | return QApplication::qwsEventFilter( e ); |
1191 | } | 1184 | } |
1192 | #endif | 1185 | #endif |
1193 | 1186 | ||
1194 | /*! | 1187 | /*! |
1195 | Destroys the QPEApplication. | 1188 | Destroys the QPEApplication. |
1196 | */ | 1189 | */ |
1197 | QPEApplication::~QPEApplication() | 1190 | QPEApplication::~QPEApplication() |
1198 | { | 1191 | { |
1199 | ungrabKeyboard(); | 1192 | ungrabKeyboard(); |
1200 | #if defined(Q_WS_QWS) && !defined(QT_NO_COP) | 1193 | #if defined(Q_WS_QWS) && !defined(QT_NO_COP) |
1201 | // Need to delete QCopChannels early, since the display will | 1194 | // Need to delete QCopChannels early, since the display will |
1202 | // be gone by the time we get to ~QObject(). | 1195 | // be gone by the time we get to ~QObject(). |
1203 | delete sysChannel; | 1196 | delete sysChannel; |
1204 | delete pidChannel; | 1197 | delete pidChannel; |
1205 | #endif | 1198 | #endif |
1206 | 1199 | ||
1207 | delete d; | 1200 | delete d; |
1208 | } | 1201 | } |
1209 | 1202 | ||
1210 | /*! | 1203 | /*! |
1211 | Returns <tt>$OPIEDIR/</tt>. | 1204 | Returns <tt>$OPIEDIR/</tt>. |
1212 | */ | 1205 | */ |
1213 | QString QPEApplication::qpeDir() | 1206 | QString QPEApplication::qpeDir() |
1214 | { | 1207 | { |
1215 | const char * base = getenv( "OPIEDIR" ); | 1208 | const char * base = getenv( "OPIEDIR" ); |
1216 | if ( base ) | 1209 | if ( base ) |
1217 | return QString( base ) + "/"; | 1210 | return QString( base ) + "/"; |
1218 | 1211 | ||
1219 | return QString( "../" ); | 1212 | return QString( "../" ); |
1220 | } | 1213 | } |
1221 | 1214 | ||
1222 | /*! | 1215 | /*! |
1223 | Returns the user's current Document directory. There is a trailing "/". | 1216 | Returns the user's current Document directory. There is a trailing "/". |
1224 | .. well, it does now,, and there's no trailing '/' | 1217 | .. well, it does now,, and there's no trailing '/' |
1225 | */ | 1218 | */ |
1226 | QString QPEApplication::documentDir() | 1219 | QString QPEApplication::documentDir() |
1227 | { | 1220 | { |
1228 | const char* base = getenv( "HOME"); | 1221 | const char* base = getenv( "HOME"); |
1229 | if ( base ) | 1222 | if ( base ) |
1230 | return QString( base ) + "/Documents"; | 1223 | return QString( base ) + "/Documents"; |
1231 | 1224 | ||
1232 | return QString( "../Documents" ); | 1225 | return QString( "../Documents" ); |
1233 | } | 1226 | } |
1234 | 1227 | ||
1235 | static int deforient = -1; | 1228 | static int deforient = -1; |
1236 | 1229 | ||
1237 | /*! | 1230 | /*! |
1238 | \internal | 1231 | \internal |
1239 | */ | 1232 | */ |
1240 | int QPEApplication::defaultRotation() | 1233 | int QPEApplication::defaultRotation() |
1241 | { | 1234 | { |
1242 | if ( deforient < 0 ) { | 1235 | if ( deforient < 0 ) { |
1243 | QString d = getenv( "QWS_DISPLAY" ); | 1236 | QString d = getenv( "QWS_DISPLAY" ); |
1244 | if ( d.contains( "Rot90" ) ) { | 1237 | if ( d.contains( "Rot90" ) ) { |
1245 | deforient = 90; | 1238 | deforient = 90; |
1246 | } | 1239 | } |
1247 | else if ( d.contains( "Rot180" ) ) { | 1240 | else if ( d.contains( "Rot180" ) ) { |
1248 | deforient = 180; | 1241 | deforient = 180; |
1249 | } | 1242 | } |
1250 | else if ( d.contains( "Rot270" ) ) { | 1243 | else if ( d.contains( "Rot270" ) ) { |
1251 | deforient = 270; | 1244 | deforient = 270; |
1252 | } | 1245 | } |
1253 | else { | 1246 | else { |
1254 | deforient = 0; | 1247 | deforient = 0; |
1255 | } | 1248 | } |
1256 | } | 1249 | } |
1257 | return deforient; | 1250 | return deforient; |
1258 | } | 1251 | } |
1259 | 1252 | ||
1260 | /*! | 1253 | /*! |
1261 | \internal | 1254 | \internal |
1262 | */ | 1255 | */ |
1263 | void QPEApplication::setDefaultRotation( int r ) | 1256 | void QPEApplication::setDefaultRotation( int r ) |
1264 | { | 1257 | { |
1265 | if ( qApp->type() == GuiServer ) { | 1258 | if ( qApp->type() == GuiServer ) { |
1266 | deforient = r; | 1259 | deforient = r; |
1267 | setenv( "QWS_DISPLAY", QString( "Transformed:Rot%1:0" ).arg( r ).latin1(), 1 ); | 1260 | setenv( "QWS_DISPLAY", QString( "Transformed:Rot%1:0" ).arg( r ).latin1(), 1 ); |
1268 | Config config("qpe"); | 1261 | Config config("qpe"); |
1269 | config.setGroup( "Rotation" ); | 1262 | config.setGroup( "Rotation" ); |
1270 | config.writeEntry( "Rot", r ); | 1263 | config.writeEntry( "Rot", r ); |
1271 | } | 1264 | } |
1272 | else { | 1265 | else { |
1273 | #ifndef QT_NO_COP | 1266 | #ifndef QT_NO_COP |
1274 | { QCopEnvelope e( "QPE/System", "setDefaultRotation(int)" ); | 1267 | { QCopEnvelope e( "QPE/System", "setDefaultRotation(int)" ); |
1275 | e << r; | 1268 | e << r; |
1276 | } | 1269 | } |
1277 | #endif | 1270 | #endif |
1278 | 1271 | ||
1279 | } | 1272 | } |
1280 | } | 1273 | } |
1281 | 1274 | ||
1282 | #include <qgfx_qws.h> | 1275 | #include <qgfx_qws.h> |
1283 | #include <qwindowsystem_qws.h> | 1276 | #include <qwindowsystem_qws.h> |
1284 | 1277 | ||
1285 | extern void qws_clearLoadedFonts(); | 1278 | extern void qws_clearLoadedFonts(); |
1286 | 1279 | ||
1287 | void QPEApplication::setCurrentMode( int x, int y, int depth ) | 1280 | void QPEApplication::setCurrentMode( int x, int y, int depth ) |
1288 | { | 1281 | { |
1289 | // Reset the caches | 1282 | // Reset the caches |
1290 | qws_clearLoadedFonts(); | 1283 | qws_clearLoadedFonts(); |
1291 | QPixmapCache::clear(); | 1284 | QPixmapCache::clear(); |
1292 | 1285 | ||
1293 | // Change the screen mode | 1286 | // Change the screen mode |
1294 | qt_screen->setMode(x, y, depth); | 1287 | qt_screen->setMode(x, y, depth); |
1295 | 1288 | ||
1296 | if ( qApp->type() == GuiServer ) { | 1289 | if ( qApp->type() == GuiServer ) { |
1297 | // Reconfigure the GuiServer | 1290 | // Reconfigure the GuiServer |
1298 | qwsServer->beginDisplayReconfigure(); | 1291 | qwsServer->beginDisplayReconfigure(); |
1299 | qwsServer->endDisplayReconfigure(); | 1292 | qwsServer->endDisplayReconfigure(); |
1300 | 1293 | ||
1301 | // Get all the running apps to reset | 1294 | // Get all the running apps to reset |
1302 | QCopEnvelope env( "QPE/System", "reset()" ); | 1295 | QCopEnvelope env( "QPE/System", "reset()" ); |
1303 | } | 1296 | } |
1304 | } | 1297 | } |
1305 | 1298 | ||
1306 | void QPEApplication::reset() { | 1299 | void QPEApplication::reset() { |
1307 | // Reconnect to the screen | 1300 | // Reconnect to the screen |
1308 | qt_screen->disconnect(); | 1301 | qt_screen->disconnect(); |
1309 | qt_screen->connect( QString::null ); | 1302 | qt_screen->connect( QString::null ); |
1310 | 1303 | ||
1311 | // Redraw everything | 1304 | // Redraw everything |
1312 | applyStyle(); | 1305 | applyStyle(); |
1313 | } | 1306 | } |
1314 | 1307 | ||
1315 | /*! | 1308 | /*! |
1316 | \internal | 1309 | \internal |
1317 | */ | 1310 | */ |
1318 | void QPEApplication::applyStyle() | 1311 | void QPEApplication::applyStyle() |
1319 | { | 1312 | { |
1320 | Config config( "qpe" ); | 1313 | Config config( "qpe" ); |
1321 | config.setGroup( "Appearance" ); | 1314 | config.setGroup( "Appearance" ); |
1322 | 1315 | ||
1323 | #if QT_VERSION > 233 | 1316 | #if QT_VERSION > 233 |
1324 | #if !defined(OPIE_NO_OVERRIDE_QT) | 1317 | #if !defined(OPIE_NO_OVERRIDE_QT) |
1325 | // don't block ourselves ... | 1318 | // don't block ourselves ... |
1326 | Opie::force_appearance = 0; | 1319 | Opie::force_appearance = 0; |
1327 | 1320 | ||
1328 | static QString appname = Opie::binaryName ( ); | 1321 | static QString appname = Opie::binaryName ( ); |
1329 | 1322 | ||
1330 | QStringList ex = config. readListEntry ( "NoStyle", ';' ); | 1323 | QStringList ex = config. readListEntry ( "NoStyle", ';' ); |
1331 | int nostyle = 0; | 1324 | int nostyle = 0; |
1332 | for ( QStringList::Iterator it = ex. begin ( ); it != ex. end ( ); ++it ) { | 1325 | for ( QStringList::Iterator it = ex. begin ( ); it != ex. end ( ); ++it ) { |
1333 | if ( QRegExp (( *it ). mid ( 1 ), false, true ). find ( appname, 0 ) >= 0 ) { | 1326 | if ( QRegExp (( *it ). mid ( 1 ), false, true ). find ( appname, 0 ) >= 0 ) { |
1334 | nostyle = ( *it ). left ( 1 ). toInt ( 0, 32 ); | 1327 | nostyle = ( *it ). left ( 1 ). toInt ( 0, 32 ); |
1335 | break; | 1328 | break; |
1336 | } | 1329 | } |
1337 | } | 1330 | } |
1338 | #else | 1331 | #else |
1339 | int nostyle = 0; | 1332 | int nostyle = 0; |
1340 | #endif | 1333 | #endif |
1341 | 1334 | ||
1342 | // Widget style | 1335 | // Widget style |
1343 | QString style = config.readEntry( "Style", "FlatStyle" ); | 1336 | QString style = config.readEntry( "Style", "FlatStyle" ); |
1344 | 1337 | ||
1345 | // don't set a custom style | 1338 | // don't set a custom style |
1346 | if ( nostyle & Opie::Force_Style ) | 1339 | if ( nostyle & Opie::Force_Style ) |
1347 | style = "FlatStyle"; | 1340 | style = "FlatStyle"; |
1348 | 1341 | ||
1349 | internalSetStyle ( style ); | 1342 | internalSetStyle ( style ); |
1350 | 1343 | ||
1351 | // Colors - from /etc/colors/Liquid.scheme | 1344 | // Colors - from /etc/colors/Liquid.scheme |
1352 | QColor bgcolor( config.readEntry( "Background", "#E0E0E0" ) ); | 1345 | QColor bgcolor( config.readEntry( "Background", "#E0E0E0" ) ); |
1353 | QColor btncolor( config.readEntry( "Button", "#96c8fa" ) ); | 1346 | QColor btncolor( config.readEntry( "Button", "#96c8fa" ) ); |
1354 | QPalette pal( btncolor, bgcolor ); | 1347 | QPalette pal( btncolor, bgcolor ); |
1355 | QString color = config.readEntry( "Highlight", "#73adef" ); | 1348 | QString color = config.readEntry( "Highlight", "#73adef" ); |
1356 | pal.setColor( QColorGroup::Highlight, QColor( color ) ); | 1349 | pal.setColor( QColorGroup::Highlight, QColor( color ) ); |
1357 | color = config.readEntry( "HighlightedText", "#FFFFFF" ); | 1350 | color = config.readEntry( "HighlightedText", "#FFFFFF" ); |
1358 | pal.setColor( QColorGroup::HighlightedText, QColor( color ) ); | 1351 | pal.setColor( QColorGroup::HighlightedText, QColor( color ) ); |
1359 | color = config.readEntry( "Text", "#000000" ); | 1352 | color = config.readEntry( "Text", "#000000" ); |
1360 | pal.setColor( QColorGroup::Text, QColor( color ) ); | 1353 | pal.setColor( QColorGroup::Text, QColor( color ) ); |
1361 | color = config.readEntry( "ButtonText", "#000000" ); | 1354 | color = config.readEntry( "ButtonText", "#000000" ); |
1362 | pal.setColor( QPalette::Active, QColorGroup::ButtonText, QColor( color ) ); | 1355 | pal.setColor( QPalette::Active, QColorGroup::ButtonText, QColor( color ) ); |
1363 | color = config.readEntry( "Base", "#FFFFFF" ); | 1356 | color = config.readEntry( "Base", "#FFFFFF" ); |
1364 | pal.setColor( QColorGroup::Base, QColor( color ) ); | 1357 | pal.setColor( QColorGroup::Base, QColor( color ) ); |
1365 | 1358 | ||
1366 | pal.setColor( QPalette::Disabled, QColorGroup::Text, | 1359 | pal.setColor( QPalette::Disabled, QColorGroup::Text, |
1367 | pal.color( QPalette::Active, QColorGroup::Background ).dark() ); | 1360 | pal.color( QPalette::Active, QColorGroup::Background ).dark() ); |
1368 | 1361 | ||
1369 | setPalette( pal, TRUE ); | 1362 | setPalette( pal, TRUE ); |
1370 | 1363 | ||
1371 | // Window Decoration | 1364 | // Window Decoration |
1372 | QString dec = config.readEntry( "Decoration", "Flat" ); | 1365 | QString dec = config.readEntry( "Decoration", "Flat" ); |
1373 | 1366 | ||
1374 | // don't set a custom deco | 1367 | // don't set a custom deco |
1375 | if ( nostyle & Opie::Force_Decoration ) | 1368 | if ( nostyle & Opie::Force_Decoration ) |
1376 | dec = ""; | 1369 | dec = ""; |
1377 | 1370 | ||
1378 | //qDebug ( "Setting Deco: %s -- old %s (%d)", dec.latin1(), d-> decorationName.latin1(), nostyle); | 1371 | //qDebug ( "Setting Deco: %s -- old %s (%d)", dec.latin1(), d-> decorationName.latin1(), nostyle); |
1379 | 1372 | ||
1380 | if ( dec != d->decorationName ) { | 1373 | if ( dec != d->decorationName ) { |
1381 | qwsSetDecoration( new QPEDecoration( dec ) ); | 1374 | qwsSetDecoration( new QPEDecoration( dec ) ); |
1382 | d->decorationName = dec; | 1375 | d->decorationName = dec; |
1383 | } | 1376 | } |
1384 | 1377 | ||
1385 | // Font | 1378 | // Font |
1386 | QString ff = config.readEntry( "FontFamily", font().family() ); | 1379 | QString ff = config.readEntry( "FontFamily", font().family() ); |
1387 | int fs = config.readNumEntry( "FontSize", font().pointSize() ); | 1380 | int fs = config.readNumEntry( "FontSize", font().pointSize() ); |
1388 | 1381 | ||
1389 | // don't set a custom font | 1382 | // don't set a custom font |
1390 | if ( nostyle & Opie::Force_Font ) { | 1383 | if ( nostyle & Opie::Force_Font ) { |
1391 | ff = "Vera"; | 1384 | ff = "Vera"; |
1392 | fs = 10; | 1385 | fs = 10; |
1393 | } | 1386 | } |
1394 | 1387 | ||
1395 | setFont ( QFont ( ff, fs ), true ); | 1388 | setFont ( QFont ( ff, fs ), true ); |
1396 | 1389 | ||
1397 | #if !defined(OPIE_NO_OVERRIDE_QT) | 1390 | #if !defined(OPIE_NO_OVERRIDE_QT) |
1398 | // revert to global blocking policy ... | 1391 | // revert to global blocking policy ... |
1399 | Opie::force_appearance = config. readBoolEntry ( "ForceStyle", false ) ? Opie::Force_All : Opie::Force_None; | 1392 | Opie::force_appearance = config. readBoolEntry ( "ForceStyle", false ) ? Opie::Force_All : Opie::Force_None; |
1400 | Opie::force_appearance &= ~nostyle; | 1393 | Opie::force_appearance &= ~nostyle; |
1401 | #endif | 1394 | #endif |
1402 | #endif | 1395 | #endif |
1403 | } | 1396 | } |
1404 | 1397 | ||
1405 | void QPEApplication::systemMessage( const QCString& msg, const QByteArray& data ) | 1398 | void QPEApplication::systemMessage( const QCString& msg, const QByteArray& data ) |
1406 | { | 1399 | { |
1407 | #ifdef Q_WS_QWS | 1400 | #ifdef Q_WS_QWS |
1408 | QDataStream stream( data, IO_ReadOnly ); | 1401 | QDataStream stream( data, IO_ReadOnly ); |
1409 | if ( msg == "applyStyle()" ) { | 1402 | if ( msg == "applyStyle()" ) { |
1410 | applyStyle(); | 1403 | applyStyle(); |
1411 | } | 1404 | } |
1412 | else if ( msg == "toggleApplicationMenu()" ) { | 1405 | else if ( msg == "toggleApplicationMenu()" ) { |
1413 | QWidget *active = activeWindow ( ); | 1406 | QWidget *active = activeWindow ( ); |
1414 | 1407 | ||
1415 | if ( active ) { | 1408 | if ( active ) { |
1416 | QPEMenuToolFocusManager *man = QPEMenuToolFocusManager::manager ( ); | 1409 | QPEMenuToolFocusManager *man = QPEMenuToolFocusManager::manager ( ); |
1417 | bool oldactive = man-> isActive ( ); | 1410 | bool oldactive = man-> isActive ( ); |
1418 | 1411 | ||
1419 | man-> setActive( !man-> isActive() ); | 1412 | man-> setActive( !man-> isActive() ); |
1420 | 1413 | ||
1421 | if ( !oldactive && !man-> isActive ( )) { // no menubar to toggle -> try O-Menu | 1414 | if ( !oldactive && !man-> isActive ( )) { // no menubar to toggle -> try O-Menu |
1422 | QCopEnvelope e ( "QPE/TaskBar", "toggleStartMenu()" ); | 1415 | QCopEnvelope e ( "QPE/TaskBar", "toggleStartMenu()" ); |
1423 | } | 1416 | } |
1424 | } | 1417 | } |
1425 | } | 1418 | } |
1426 | else if ( msg == "setDefaultRotation(int)" ) { | 1419 | else if ( msg == "setDefaultRotation(int)" ) { |
1427 | if ( type() == GuiServer ) { | 1420 | if ( type() == GuiServer ) { |
1428 | int r; | 1421 | int r; |
1429 | stream >> r; | 1422 | stream >> r; |
1430 | setDefaultRotation( r ); | 1423 | setDefaultRotation( r ); |
1431 | } | 1424 | } |
1432 | } | 1425 | } |
1433 | else if ( msg == "setCurrentMode(int,int,int)" ) { // Added: 2003-06-11 by Tim Ansell <mithro@mithis.net> | 1426 | else if ( msg == "setCurrentMode(int,int,int)" ) { // Added: 2003-06-11 by Tim Ansell <mithro@mithis.net> |
1434 | if ( type() == GuiServer ) { | 1427 | if ( type() == GuiServer ) { |
1435 | int x, y, depth; | 1428 | int x, y, depth; |
1436 | stream >> x; | 1429 | stream >> x; |
1437 | stream >> y; | 1430 | stream >> y; |
1438 | stream >> depth; | 1431 | stream >> depth; |
1439 | setCurrentMode( x, y, depth ); | 1432 | setCurrentMode( x, y, depth ); |
1440 | } | 1433 | } |
1441 | } | 1434 | } |
1442 | else if ( msg == "reset()" ) { | 1435 | else if ( msg == "reset()" ) { |
1443 | if ( type() != GuiServer ) | 1436 | if ( type() != GuiServer ) |
1444 | reset(); | 1437 | reset(); |
1445 | } | 1438 | } |
1446 | else if ( msg == "setCurrentRotation(int)" ) { | 1439 | else if ( msg == "setCurrentRotation(int)" ) { |
1447 | int r; | 1440 | int r; |
1448 | stream >> r; | 1441 | stream >> r; |
1449 | setCurrentRotation( r ); | 1442 | setCurrentRotation( r ); |
1450 | } | 1443 | } |
1451 | else if ( msg == "shutdown()" ) { | 1444 | else if ( msg == "shutdown()" ) { |
1452 | if ( type() == GuiServer ) | 1445 | if ( type() == GuiServer ) |
1453 | shutdown(); | 1446 | shutdown(); |
1454 | } | 1447 | } |
1455 | else if ( msg == "quit()" ) { | 1448 | else if ( msg == "quit()" ) { |
1456 | if ( type() != GuiServer ) | 1449 | if ( type() != GuiServer ) |
1457 | tryQuit(); | 1450 | tryQuit(); |
1458 | } | 1451 | } |
1459 | else if ( msg == "forceQuit()" ) { | 1452 | else if ( msg == "forceQuit()" ) { |
1460 | if ( type() != GuiServer ) | 1453 | if ( type() != GuiServer ) |
1461 | quit(); | 1454 | quit(); |
1462 | } | 1455 | } |
1463 | else if ( msg == "restart()" ) { | 1456 | else if ( msg == "restart()" ) { |
1464 | if ( type() == GuiServer ) | 1457 | if ( type() == GuiServer ) |
1465 | restart(); | 1458 | restart(); |
1466 | } | 1459 | } |
1467 | else if ( msg == "language(QString)" ) { | 1460 | else if ( msg == "language(QString)" ) { |
1468 | if ( type() == GuiServer ) { | 1461 | if ( type() == GuiServer ) { |
1469 | QString l; | 1462 | QString l; |
1470 | stream >> l; | 1463 | stream >> l; |
1471 | QString cl = getenv( "LANG" ); | 1464 | QString cl = getenv( "LANG" ); |
1472 | if ( cl != l ) { | 1465 | if ( cl != l ) { |
1473 | if ( l.isNull() ) | 1466 | if ( l.isNull() ) |
1474 | unsetenv( "LANG" ); | 1467 | unsetenv( "LANG" ); |
1475 | else | 1468 | else |
1476 | setenv( "LANG", l.latin1(), 1 ); | 1469 | setenv( "LANG", l.latin1(), 1 ); |
1477 | restart(); | 1470 | restart(); |
1478 | } | 1471 | } |
1479 | } | 1472 | } |
1480 | } | 1473 | } |
1481 | else if ( msg == "timeChange(QString)" ) { | 1474 | else if ( msg == "timeChange(QString)" ) { |
1482 | QString t; | 1475 | QString t; |
1483 | stream >> t; | 1476 | stream >> t; |
1484 | if ( t.isNull() ) | 1477 | if ( t.isNull() ) |
1485 | unsetenv( "TZ" ); | 1478 | unsetenv( "TZ" ); |
1486 | else | 1479 | else |
1487 | setenv( "TZ", t.latin1(), 1 ); | 1480 | setenv( "TZ", t.latin1(), 1 ); |
1488 | // emit the signal so everyone else knows... | 1481 | // emit the signal so everyone else knows... |
1489 | emit timeChanged(); | 1482 | emit timeChanged(); |
1490 | } | 1483 | } |
1491 | else if ( msg == "addAlarm(QDateTime,QCString,QCString,int)" ) { | 1484 | else if ( msg == "addAlarm(QDateTime,QCString,QCString,int)" ) { |
1492 | if ( type() == GuiServer ) { | 1485 | if ( type() == GuiServer ) { |
1493 | QDateTime when; | 1486 | QDateTime when; |
1494 | QCString channel, message; | 1487 | QCString channel, message; |
1495 | int data; | 1488 | int data; |
1496 | stream >> when >> channel >> message >> data; | 1489 | stream >> when >> channel >> message >> data; |
1497 | AlarmServer::addAlarm( when, channel, message, data ); | 1490 | AlarmServer::addAlarm( when, channel, message, data ); |
1498 | } | 1491 | } |
1499 | } | 1492 | } |
1500 | else if ( msg == "deleteAlarm(QDateTime,QCString,QCString,int)" ) { | 1493 | else if ( msg == "deleteAlarm(QDateTime,QCString,QCString,int)" ) { |
1501 | if ( type() == GuiServer ) { | 1494 | if ( type() == GuiServer ) { |
1502 | QDateTime when; | 1495 | QDateTime when; |
1503 | QCString channel, message; | 1496 | QCString channel, message; |
1504 | int data; | 1497 | int data; |
1505 | stream >> when >> channel >> message >> data; | 1498 | stream >> when >> channel >> message >> data; |
1506 | AlarmServer::deleteAlarm( when, channel, message, data ); | 1499 | AlarmServer::deleteAlarm( when, channel, message, data ); |
1507 | } | 1500 | } |
1508 | } | 1501 | } |
1509 | else if ( msg == "clockChange(bool)" ) { | 1502 | else if ( msg == "clockChange(bool)" ) { |
1510 | int tmp; | 1503 | int tmp; |
1511 | stream >> tmp; | 1504 | stream >> tmp; |
1512 | emit clockChanged( tmp ); | 1505 | emit clockChanged( tmp ); |
1513 | } | 1506 | } |
1514 | else if ( msg == "weekChange(bool)" ) { | 1507 | else if ( msg == "weekChange(bool)" ) { |
1515 | int tmp; | 1508 | int tmp; |
1516 | stream >> tmp; | 1509 | stream >> tmp; |
1517 | emit weekChanged( tmp ); | 1510 | emit weekChanged( tmp ); |
1518 | } | 1511 | } |
1519 | else if ( msg == "setDateFormat(DateFormat)" ) { | 1512 | else if ( msg == "setDateFormat(DateFormat)" ) { |
1520 | DateFormat tmp; | 1513 | DateFormat tmp; |
1521 | stream >> tmp; | 1514 | stream >> tmp; |
1522 | emit dateFormatChanged( tmp ); | 1515 | emit dateFormatChanged( tmp ); |
1523 | } | 1516 | } |
1524 | else if ( msg == "setVolume(int,int)" ) { | 1517 | else if ( msg == "setVolume(int,int)" ) { |
1525 | int t, v; | 1518 | int t, v; |
1526 | stream >> t >> v; | 1519 | stream >> t >> v; |
1527 | setVolume( t, v ); | 1520 | setVolume( t, v ); |
1528 | emit volumeChanged( muted ); | 1521 | emit volumeChanged( muted ); |
1529 | } | 1522 | } |
1530 | else if ( msg == "volumeChange(bool)" ) { | 1523 | else if ( msg == "volumeChange(bool)" ) { |
1531 | stream >> muted; | 1524 | stream >> muted; |
1532 | setVolume(); | 1525 | setVolume(); |
1533 | emit volumeChanged( muted ); | 1526 | emit volumeChanged( muted ); |
1534 | } | 1527 | } |
1535 | else if ( msg == "setMic(int,int)" ) { // Added: 2002-02-08 by Jeremy Cowgar <jc@cowgar.com> | 1528 | else if ( msg == "setMic(int,int)" ) { // Added: 2002-02-08 by Jeremy Cowgar <jc@cowgar.com> |
1536 | int t, v; | 1529 | int t, v; |
1537 | stream >> t >> v; | 1530 | stream >> t >> v; |
1538 | setMic( t, v ); | 1531 | setMic( t, v ); |
1539 | emit micChanged( micMuted ); | 1532 | emit micChanged( micMuted ); |
1540 | } | 1533 | } |
1541 | else if ( msg == "micChange(bool)" ) { // Added: 2002-02-08 by Jeremy Cowgar <jc@cowgar.com> | 1534 | else if ( msg == "micChange(bool)" ) { // Added: 2002-02-08 by Jeremy Cowgar <jc@cowgar.com> |
1542 | stream >> micMuted; | 1535 | stream >> micMuted; |
1543 | setMic(); | 1536 | setMic(); |
1544 | emit micChanged( micMuted ); | 1537 | emit micChanged( micMuted ); |
1545 | } | 1538 | } |
1546 | else if ( msg == "setBass(int,int)" ) { // Added: 2002-12-13 by Maximilian Reiss <harlekin@handhelds.org> | 1539 | else if ( msg == "setBass(int,int)" ) { // Added: 2002-12-13 by Maximilian Reiss <harlekin@handhelds.org> |
1547 | int t, v; | 1540 | int t, v; |
1548 | stream >> t >> v; | 1541 | stream >> t >> v; |
1549 | setBass( t, v ); | 1542 | setBass( t, v ); |
1550 | } | 1543 | } |
1551 | else if ( msg == "bassChange(bool)" ) { // Added: 2002-12-13 by Maximilian Reiss <harlekin@handhelds.org> | 1544 | else if ( msg == "bassChange(bool)" ) { // Added: 2002-12-13 by Maximilian Reiss <harlekin@handhelds.org> |
1552 | setBass(); | 1545 | setBass(); |
1553 | } | 1546 | } |
1554 | else if ( msg == "setTreble(int,int)" ) { // Added: 2002-12-13 by Maximilian Reiss <harlekin@handhelds.org> | 1547 | else if ( msg == "setTreble(int,int)" ) { // Added: 2002-12-13 by Maximilian Reiss <harlekin@handhelds.org> |
1555 | int t, v; | 1548 | int t, v; |
1556 | stream >> t >> v; | 1549 | stream >> t >> v; |
1557 | setTreble( t, v ); | 1550 | setTreble( t, v ); |
1558 | } | 1551 | } |
1559 | else if ( msg == "trebleChange(bool)" ) { // Added: 2002-12-13 by Maximilian Reiss <harlekin@handhelds.org> | 1552 | else if ( msg == "trebleChange(bool)" ) { // Added: 2002-12-13 by Maximilian Reiss <harlekin@handhelds.org> |
1560 | setTreble(); | 1553 | setTreble(); |
1561 | } else if ( msg == "getMarkedText()" ) { | 1554 | } else if ( msg == "getMarkedText()" ) { |
1562 | if ( type() == GuiServer ) { | 1555 | if ( type() == GuiServer ) { |
1563 | const ushort unicode = 'C'-'@'; | 1556 | const ushort unicode = 'C'-'@'; |
1564 | const int scan = Key_C; | 1557 | const int scan = Key_C; |
1565 | qwsServer->processKeyEvent( unicode, scan, ControlButton, TRUE, FALSE ); | 1558 | qwsServer->processKeyEvent( unicode, scan, ControlButton, TRUE, FALSE ); |
1566 | qwsServer->processKeyEvent( unicode, scan, ControlButton, FALSE, FALSE ); | 1559 | qwsServer->processKeyEvent( unicode, scan, ControlButton, FALSE, FALSE ); |
1567 | } | 1560 | } |
1568 | } else if ( msg == "newChannel(QString)") { | 1561 | } else if ( msg == "newChannel(QString)") { |
1569 | QString myChannel = "QPE/Application/" + d->appName; | 1562 | QString myChannel = "QPE/Application/" + d->appName; |
1570 | QString channel; | 1563 | QString channel; |
1571 | stream >> channel; | 1564 | stream >> channel; |
1572 | if (channel == myChannel) { | 1565 | if (channel == myChannel) { |
1573 | processQCopFile(); | 1566 | processQCopFile(); |
1574 | d->sendQCopQ(); | 1567 | d->sendQCopQ(); |
1575 | } | 1568 | } |
1576 | } | 1569 | } |
1577 | 1570 | ||
1578 | 1571 | ||
1579 | #endif | 1572 | #endif |
1580 | } | 1573 | } |
1581 | 1574 | ||
1582 | 1575 | ||
1583 | 1576 | ||
1584 | 1577 | ||
1585 | 1578 | ||
1586 | /*! | 1579 | /*! |
1587 | \internal | 1580 | \internal |
1588 | */ | 1581 | */ |
1589 | bool QPEApplication::raiseAppropriateWindow() | 1582 | bool QPEApplication::raiseAppropriateWindow() |
1590 | { | 1583 | { |
1591 | bool r=FALSE; | 1584 | bool r=FALSE; |
1592 | 1585 | ||
1593 | // 1. Raise the main widget | 1586 | // 1. Raise the main widget |
1594 | QWidget *top = d->qpe_main_widget; | 1587 | QWidget *top = d->qpe_main_widget; |
1595 | if ( !top ) top = mainWidget(); | 1588 | if ( !top ) top = mainWidget(); |
1596 | 1589 | ||
1597 | if ( top && d->keep_running ) { | 1590 | if ( top && d->keep_running ) { |
1598 | if ( top->isVisible() ) | 1591 | if ( top->isVisible() ) |
1599 | r = TRUE; | 1592 | r = TRUE; |
1600 | else if (d->preloaded) { | 1593 | else if (d->preloaded) { |
1601 | // We are preloaded and not visible.. pretend we just started.. | 1594 | // We are preloaded and not visible.. pretend we just started.. |
1602 | #ifndef QT_NO_COP | 1595 | #ifndef QT_NO_COP |
1603 | QCopEnvelope e("QPE/System", "fastAppShowing(QString)"); | 1596 | QCopEnvelope e("QPE/System", "fastAppShowing(QString)"); |
1604 | e << d->appName; | 1597 | e << d->appName; |
1605 | #endif | 1598 | #endif |
1606 | } | 1599 | } |
1607 | 1600 | ||
1608 | d->show_mx(top,d->nomaximize, d->appName); | 1601 | d->show_mx(top,d->nomaximize, d->appName); |
1609 | top->raise(); | 1602 | top->raise(); |
1610 | } | 1603 | } |
1611 | 1604 | ||
1612 | QWidget *topm = activeModalWidget(); | 1605 | QWidget *topm = activeModalWidget(); |
1613 | 1606 | ||
1614 | // 2. Raise any parentless widgets (except top and topm, as they | 1607 | // 2. Raise any parentless widgets (except top and topm, as they |
1615 | // are raised before and after this loop). Order from most | 1608 | // are raised before and after this loop). Order from most |
1616 | // recently raised as deepest to least recently as top, so | 1609 | // recently raised as deepest to least recently as top, so |
1617 | // that repeated calls cycle through widgets. | 1610 | // that repeated calls cycle through widgets. |
1618 | QWidgetList *list = topLevelWidgets(); | 1611 | QWidgetList *list = topLevelWidgets(); |
1619 | if ( list ) { | 1612 | if ( list ) { |
1620 | bool foundlast = FALSE; | 1613 | bool foundlast = FALSE; |
1621 | QWidget* topsub = 0; | 1614 | QWidget* topsub = 0; |
1622 | if ( d->lastraised ) { | 1615 | if ( d->lastraised ) { |
1623 | for (QWidget* w = list->first(); w; w = list->next()) { | 1616 | for (QWidget* w = list->first(); w; w = list->next()) { |
1624 | if ( !w->parentWidget() && w != topm && w->isVisible() && !w->isDesktop() ) { | 1617 | if ( !w->parentWidget() && w != topm && w->isVisible() && !w->isDesktop() ) { |
1625 | if ( w == d->lastraised ) | 1618 | if ( w == d->lastraised ) |
1626 | foundlast = TRUE; | 1619 | foundlast = TRUE; |
1627 | if ( foundlast ) { | 1620 | if ( foundlast ) { |
1628 | w->raise(); | 1621 | w->raise(); |
1629 | topsub = w; | 1622 | topsub = w; |
1630 | } | 1623 | } |
1631 | } | 1624 | } |
1632 | } | 1625 | } |
1633 | } | 1626 | } |
1634 | for (QWidget* w = list->first(); w; w = list->next()) { | 1627 | for (QWidget* w = list->first(); w; w = list->next()) { |
1635 | if ( !w->parentWidget() && w != topm && w->isVisible() && !w->isDesktop() ) { | 1628 | if ( !w->parentWidget() && w != topm && w->isVisible() && !w->isDesktop() ) { |
1636 | if ( w == d->lastraised ) | 1629 | if ( w == d->lastraised ) |