2 files changed, 3 insertions, 10 deletions

diff --git a/library/qpeapplication.cpp b/library/qpeapplication.cpp
index f5bf0c5..7463074 100644
--- a/library/qpeapplication.cpp
+++ b/library/qpeapplication.cpp
@@ -302,1507 +302,1505 @@ static void setVolume( int t = 0, int percent = -1 )
                                         // set both channels to same volume
                                         vol |= vol << 8;
                                         ioctl( fd, MIXER_WRITE( 0 ), &vol );
                                         ::close( fd );
                                 }
                         }
                         break;
         }
 }
 
 static void setMic( int t = 0, int percent = -1 )
 {
         switch ( t ) {
                 case 0: {
                                 Config cfg( "qpe" );
                                 cfg.setGroup( "Volume" );
                                 if ( percent < 0 )
                                         percent = cfg.readNumEntry( "Mic", 50 );
 
                                 int fd = 0;
                                 int mic = micMuted ? 0 : percent;
                                 if ( ( fd = open( "/dev/mixer", O_RDWR ) ) >= 0 ) {
                                         ioctl( fd, MIXER_WRITE( SOUND_MIXER_MIC ), &mic );
                                         ::close( fd );
                                 }
                         }
                         break;
         }
 }
 
 
 static void setBass( int t = 0, int percent = -1 )
 {
         switch ( t ) {
                 case 0: {
                                 Config cfg( "qpe" );
                                 cfg.setGroup( "Volume" );
                                 if ( percent < 0 )
                                         percent = cfg.readNumEntry( "BassPercent", 50 );
 
                                 int fd = 0;
                                 int bass = percent;
                                 if ( ( fd = open( "/dev/mixer", O_RDWR ) ) >= 0 ) {
                                         ioctl( fd, MIXER_WRITE( SOUND_MIXER_BASS ), &bass );
                                         ::close( fd );
                                 }
                         }
                         break;
         }
 }
 
 
 static void setTreble( int t = 0, int percent = -1 )
 {
         switch ( t ) {
                 case 0: {
                                 Config cfg( "qpe" );
                                 cfg.setGroup( "Volume" );
                                 if ( percent < 0 )
                                         percent = cfg.readNumEntry( "TreblePercent", 50 );
 
                                 int fd = 0;
                                 int treble = percent;
                                 if ( ( fd = open( "/dev/mixer", O_RDWR ) ) >= 0 ) {
                                         ioctl( fd, MIXER_WRITE( SOUND_MIXER_TREBLE ), &treble );
                                         ::close( fd );
                                 }
                         }
                         break;
         }
 }
 
 
 /*!
   \class QPEApplication qpeapplication.h
   \brief The QPEApplication class implements various system services
     that are available to all Qtopia applications.
 
   Simply by using QPEApplication instead of QApplication, a standard Qt
   application becomes a Qtopia application. It automatically follows
   style changes, quits and raises, and in the
   case of \link docwidget.html document-oriented\endlink applications,
   changes the currently displayed document in response to the environment.
 
   To create a \link docwidget.html document-oriented\endlink
   application use showMainDocumentWidget(); to create a
   non-document-oriented application use showMainWidget(). The
   keepRunning() function indicates whether the application will
   continue running after it's processed the last \link qcop.html
   QCop\endlink message. This can be changed using setKeepRunning().
 
   A variety of signals are emitted when certain events occur, for
   example, timeChanged(), clockChanged(), weekChanged(),
   dateFormatChanged() and volumeChanged(). If the application receives
   a \link qcop.html QCop\endlink message on the application's
   QPE/Application/\e{appname} channel, the appMessage() signal is
   emitted. There are also flush() and reload() signals, which
   are emitted when synching begins and ends respectively - upon these
   signals, the application should save and reload any data
   files that are involved in synching. Most of these signals will initially
   be received and unfiltered through the appMessage() signal.
 
   This class also provides a set of useful static functions. The
   qpeDir() and documentDir() functions return the respective paths.
   The grabKeyboard() and ungrabKeyboard() functions are used to
   control whether the application takes control of the device's
   physical buttons (e.g. application launch keys). The stylus' mode of
   operation is set with setStylusOperation() and retrieved with
   stylusOperation(). There are also setInputMethodHint() and
   inputMethodHint() functions.
 
   \ingroup qtopiaemb
 */
 
 /*!
   \fn void QPEApplication::clientMoused()
 
   \internal
 */
 
 /*!
   \fn void QPEApplication::timeChanged();
   This signal is emitted when the time changes outside the normal
   passage of time, i.e. if the time is set backwards or forwards.
 */
 
 /*!
   \fn void QPEApplication::clockChanged( bool ampm );
 
   This signal is emitted when the user changes the clock's style. If
   \a ampm is TRUE, the user wants a 12-hour AM/PM clock, otherwise,
   they want a 24-hour clock.
 */
 
 /*!
     \fn void QPEApplication::volumeChanged( bool muted )
 
     This signal is emitted whenever the mute state is changed. If \a
     muted is TRUE, then sound output has been muted.
 */
 
 /*!
     \fn void QPEApplication::weekChanged( bool startOnMonday )
 
     This signal is emitted if the week start day is changed. If \a
     startOnMonday is TRUE then the first day of the week is Monday; if
     \a startOnMonday is FALSE then the first day of the week is
     Sunday.
 */
 
 /*!
     \fn void QPEApplication::dateFormatChanged()
 
     This signal is emitted whenever the date format is changed.
 */
 
 /*!
     \fn void QPEApplication::flush()
 
     ###
 */
 
 /*!
   \fn void QPEApplication::reload()
 
 */
 
 /*!
   \fn void QPEApplication::appMessage( const QCString& msg, const QByteArray& data )
 
   This signal is emitted when a message is received on this
   application's QPE/Application/<i>appname</i> \link qcop.html
   QCop\endlink channel.
 
   The slot to which you connect this signal uses \a msg and \a data
   in the following way:
 
 \code
      void MyWidget::receive( const QCString& msg, const QByteArray& data )
      {
        QDataStream stream( data, IO_ReadOnly );
        if ( msg == "someMessage(int,int,int)" ) {
             int a,b,c;
             stream >> a >> b >> c;
             ...
        } else if ( msg == "otherMessage(QString)" ) {
            ...
        }
     }
 \endcode
 
   \sa qcop.html
   Note that messages received here may be processed by qpe application
   and emitted as signals, such as flush() and reload().
 */
 
 /*!
   Constructs a QPEApplication just as you would construct
   a QApplication, passing \a argc, \a argv, and \a t.
 
   For applications, \a t should be the default, GuiClient. Only
   the Qtopia server passes GuiServer.
 */
 QPEApplication::QPEApplication( int & argc, char **argv, Type t )
                 : QApplication( argc, argv, t )
 {
         d = new QPEApplicationData;
         d->loadTextCodecs();
         d->loadImageCodecs();
         int dw = desktop() ->width();
 
         if ( dw < 200 ) {
                 setFont( QFont( "helvetica", 8 ) );
                 AppLnk::setSmallIconSize( 10 );
                 AppLnk::setBigIconSize( 28 );
         }
         else if ( dw > 600 ) {
                 setFont( QFont( "helvetica", 12 ) );
                 AppLnk::setSmallIconSize( 24 );
                 AppLnk::setBigIconSize( 48 );
         }
         else if ( dw > 200 ) {
                 setFont( QFont( "helvetica", 10 ) );
                 AppLnk::setSmallIconSize( 16 );
                 AppLnk::setBigIconSize( 32 );
         }
 
 
         QMimeSourceFactory::setDefaultFactory( new ResourceMimeFactory );
 
         connect( this, SIGNAL( lastWindowClosed() ), this, SLOT( hideOrQuit() ) );
 #if defined(Q_WS_QWS) && !defined(QT_NO_COP)
 
         QString qcopfn( "/tmp/qcop-msg-" );
         qcopfn += QString( argv[ 0 ] ); // append command name
 
         QFile f( qcopfn );
         if ( f.open( IO_ReadOnly ) ) {
                 flock( f.handle(), LOCK_EX );
         }
 
         sysChannel = new QCopChannel( "QPE/System", this );
         connect( sysChannel, SIGNAL( received( const QCString &, const QByteArray & ) ),
                  this, SLOT( systemMessage( const QCString &, const QByteArray & ) ) );
 
         QCString channel = QCString( argv[ 0 ] );
         channel.replace( QRegExp( ".*/" ), "" );
         d->appName = channel;
         channel = "QPE/Application/" + channel;
         pidChannel = new QCopChannel( channel, this );
         connect( pidChannel, SIGNAL( received( const QCString &, const QByteArray & ) ),
                  this, SLOT( pidMessage( const QCString &, const QByteArray & ) ) );
 
         if ( f.isOpen() ) {
                 d->keep_running = FALSE;
                 QDataStream ds( &f );
                 QCString channel, message;
                 QByteArray data;
                 while ( !ds.atEnd() ) {
                         ds >> channel >> message >> data;
                         d->enqueueQCop( channel, message, data );
                 }
 
                 flock( f.handle(), LOCK_UN );
                 f.close();
                 f.remove();
         }
 
         for ( int a = 0; a < argc; a++ ) {
                 if ( qstrcmp( argv[ a ], "-preload" ) == 0 ) {
                         argv[ a ] = argv[ a + 1 ];
                         a++;
                         d->preloaded = TRUE;
                         argc -= 1;
                 }
                 else if ( qstrcmp( argv[ a ], "-preload-show" ) == 0 ) {
                         argv[ a ] = argv[ a + 1 ];
                         a++;
                         d->preloaded = TRUE;
                         d->forceshow = TRUE;
                         argc -= 1;
                 }
         }
 
         /* overide stored arguments */
         setArgs( argc, argv );
 
 #endif
 
         //  qwsSetDecoration( new QPEDecoration() );
 
 #ifndef QT_NO_TRANSLATION
 
         QStringList langs = Global::languageList();
         for ( QStringList::ConstIterator it = langs.begin(); it != langs.end(); ++it ) {
                 QString lang = *it;
 
                 QTranslator * trans;
                 QString tfn;
 
                 trans = new QTranslator( this );
                 tfn = qpeDir() + "/i18n/" + lang + "/libqpe.qm";
                 if ( trans->load( tfn ) )
                         installTranslator( trans );
                 else
                         delete trans;
 
                 trans = new QTranslator( this );
                 tfn = qpeDir() + "/i18n/" + lang + "/" + d->appName + ".qm";
                 if ( trans->load( tfn ) )
                         installTranslator( trans );
                 else
                         delete trans;
 
                 //###language/font hack; should look it up somewhere
 #ifdef QWS
 
                 if ( lang == "ja" || lang == "zh_CN" || lang == "zh_TW" || lang == "ko" ) {
                         QFont fn = FontManager::unicodeFont( FontManager::Proportional );
                         setFont( fn );
                 }
 #endif
 
         }
 #endif
 
         applyStyle();
 
         if ( type() == GuiServer ) {
                 setVolume();
         }
 
         installEventFilter( this );
 
         QPEMenuToolFocusManager::initialize();
 
 #ifdef QT_NO_QWS_CURSOR
         // if we have no cursor, probably don't want tooltips
         QToolTip::setEnabled( FALSE );
 #endif
 }
 
 static QPtrDict<void>* inputMethodDict = 0;
 static void createInputMethodDict()
 {
         if ( !inputMethodDict )
                 inputMethodDict = new QPtrDict<void>;
 }
 
 /*!
   Returns the currently set hint to the system as to whether
   widget \a w has any use for text input methods.
 
 
   \sa setInputMethodHint() InputMethodHint
 */
 QPEApplication::InputMethodHint QPEApplication::inputMethodHint( QWidget * w )
 {
         if ( inputMethodDict && w )
                 return ( InputMethodHint ) ( int ) inputMethodDict->find( w );
         return Normal;
 }
 
 /*!
   \enum QPEApplication::InputMethodHint
 
   \value Normal the application sometimes needs text input (the default).
   \value AlwaysOff the application never needs text input.
   \value AlwaysOn the application always needs text input.
 */
 
 /*!
   Hints to the system that widget \a w has use for text input methods
   as specified by \a mode.
 
   \sa inputMethodHint() InputMethodHint
 */
 void QPEApplication::setInputMethodHint( QWidget * w, InputMethodHint mode )
 {
         createInputMethodDict();
         if ( mode == Normal ) {
                 inputMethodDict->remove
                 ( w );
         }
         else {
                 inputMethodDict->insert( w, ( void* ) mode );
         }
 }
 
 class HackDialog : public QDialog
 {
 public:
         void acceptIt()
         {
                 accept();
         }
         void rejectIt()
         {
                 reject();
         }
 };
 
 
 void QPEApplication::mapToDefaultAction( QWSKeyEvent * ke, int key )
 {
         // specialised actions for certain widgets. May want to
         // add more stuff here.
         if ( activePopupWidget() && activePopupWidget() ->inherits( "QListBox" )
                 && activePopupWidget() ->parentWidget()
                 && activePopupWidget() ->parentWidget() ->inherits( "QComboBox" ) )
                 key = Qt::Key_Return;
 
         if ( activePopupWidget() && activePopupWidget() ->inherits( "QPopupMenu" ) )
                 key = Qt::Key_Return;
 
 #ifdef QWS
 
         ke->simpleData.keycode = key;
 #endif
 }
 
 class HackWidget : public QWidget
 {
 public:
         bool needsOk()
         {
                 return ( getWState() & WState_Reserved1 );
         }
 };
 
 /*!
   \internal
 */
 
 #ifdef QWS
 bool QPEApplication::qwsEventFilter( QWSEvent * e )
 {
         if ( !d->notbusysent && e->type == QWSEvent::Focus ) {
                 if ( qApp->type() != QApplication::GuiServer ) {
                         QCopEnvelope e( "QPE/System", "notBusy(QString)" );
                         e << d->appName;
                 }
                 d->notbusysent = TRUE;
         }
         if ( type() == GuiServer ) {
                 switch ( e->type ) {
                         case QWSEvent::Mouse:
                                 if ( e->asMouse() ->simpleData.state && !QWidget::find( e->window() ) )
                                         emit clientMoused();
                                 break;
                         default:
                                 break;
                 }
         }
         if ( e->type == QWSEvent::Key ) {
                 QWSKeyEvent *ke = ( QWSKeyEvent * ) e;
                 if ( ke->simpleData.keycode == Qt::Key_F33 ) {
                         // Use special "OK" key to press "OK" on top level widgets
                         QWidget * active = activeWindow();
                         QWidget *popup = 0;
                         if ( active && active->isPopup() ) {
                                 popup = active;
                                 active = active->parentWidget();
                         }
                         if ( active && ( int ) active->winId() == ke->simpleData.window &&
                                 !active->testWFlags( WStyle_Customize | WType_Popup | WType_Desktop ) ) {
                                 if ( ke->simpleData.is_press ) {
                                         if ( popup )
                                                 popup->close();
                                         if ( active->inherits( "QDialog" ) ) {
                                                 HackDialog * d = ( HackDialog * ) active;
                                                 d->acceptIt();
                                                 return TRUE;
                                         }
                                         else if ( ( ( HackWidget * ) active ) ->needsOk() ) {
                                                 QSignal s;
                                                 s.connect( active, SLOT( accept() ) );
                                                 s.activate();
                                         }
                                         else {
                                                 // do the same as with the select key: Map to the default action of the widget:
                                                 mapToDefaultAction( ke, Qt::Key_Return );
                                         }
                                 }
                         }
                 }
                 else if ( ke->simpleData.keycode == Qt::Key_F30 ) {
                         // Use special "select" key to do whatever default action a widget has
                         mapToDefaultAction( ke, Qt::Key_Space );
                 }
                 else if ( ke->simpleData.keycode == Qt::Key_Escape &&
                           ke->simpleData.is_press ) {
                         // Escape key closes app if focus on toplevel
                         QWidget * active = activeWindow();
                         if ( active && active->testWFlags( WType_TopLevel ) &&
                                 ( int ) active->winId() == ke->simpleData.window &&
                                 !active->testWFlags( WStyle_Dialog | WStyle_Customize | WType_Popup | WType_Desktop ) ) {
                                 if ( active->inherits( "QDialog" ) ) {
                                         HackDialog * d = ( HackDialog * ) active;
                                         d->rejectIt();
                                         return TRUE;
                                 }
                                 else if ( strcmp( argv() [ 0 ], "embeddedkonsole" ) != 0 ) {
                                         active->close();
                                 }
                         }
                 }
                 else if ( ke->simpleData.keycode >= Qt::Key_F1 && ke->simpleData.keycode <= Qt::Key_F29 ) {
                         // this should be if ( ODevice::inst ( )-> buttonForKeycode ( ... ))
                         // but we cannot access libopie function within libqpe :(
 
                         QWidget * active = activeWindow ( );
                         if ( active && ((int) active-> winId ( ) == ke-> simpleData.window )) {
                                 if ( d-> kbgrabbed ) { // we grabbed the keyboard
                                         QChar ch ( ke-> simpleData.unicode );
                                         QKeyEvent qke ( ke-> simpleData. is_press ? QEvent::KeyPress : QEvent::KeyRelease, 
                                                         ke-> simpleData.keycode,
                                                         ch. latin1 ( ),
                                                         ke-> simpleData.modifiers,
                                                         QString ( ch ),
                                                         ke-> simpleData.is_auto_repeat, 1 );
 
                                         QObject *which = QWidget::keyboardGrabber ( );
                                         if ( !which )  
                                                 which = QApplication::focusWidget ( );
                                         if ( !which )  
                                                 which = QApplication::activeWindow ( );
                                         if ( !which )  
                                                 which = qApp;
                                          
                                         QApplication::sendEvent ( which, &qke );
                                 }
                                 else { // we didn't grab the keyboard, so send the event to the launcher
                                         QCopEnvelope e ( "QPE/Launcher", "deviceButton(int,int,int)" );
                                         e << int( ke-> simpleData.keycode ) << int( ke-> simpleData. is_press ) << int( ke-> simpleData.is_auto_repeat );
                                 }
                         }
                         return true;
                         }       
         }
         if ( e->type == QWSEvent::Focus ) {
                 QWSFocusEvent * fe = ( QWSFocusEvent* ) e;
                 if ( !fe->simpleData.get_focus ) {
                         QWidget * active = activeWindow();
                         while ( active && active->isPopup() ) {
                                 active->close();
                                 active = activeWindow();
                         }
                 }
                 else {
                         // make sure our modal widget is ALWAYS on top
                         QWidget *topm = activeModalWidget();
                         if ( topm ) {
                                 topm->raise();
                         }
                 }
                 if ( fe->simpleData.get_focus && inputMethodDict ) {
                         InputMethodHint m = inputMethodHint( QWidget::find( e->window() ) );
                         if ( m == AlwaysOff )
                                 Global::hideInputMethod();
                         if ( m == AlwaysOn )
                                 Global::showInputMethod();
                 }
         }
         return QApplication::qwsEventFilter( e );
 }
 #endif
 
 /*!
   Destroys the QPEApplication.
 */
 QPEApplication::~QPEApplication()
 {
         ungrabKeyboard();
 #if defined(Q_WS_QWS) && !defined(QT_NO_COP)
         // Need to delete QCopChannels early, since the display will
         // be gone by the time we get to ~QObject().
         delete sysChannel;
         delete pidChannel;
 #endif
 
         delete d;
 }
 
 /*!
   Returns <tt>$OPIEDIR/</tt>.
 */
 QString QPEApplication::qpeDir()
 {
         const char * base = getenv( "OPIEDIR" );
         if ( base )
                 return QString( base ) + "/";
 
         return QString( "../" );
 }
 
 /*!
   Returns the user's current Document directory. There is a trailing "/".
   .. well, it does now,, and there's no trailing '/'
 */
 QString QPEApplication::documentDir()
 {
         const char* base = getenv( "HOME");
         if ( base )
                 return QString( base ) + "/Documents";
 
         return QString( "../Documents" );
 }
 
 static int deforient = -1;
 
 /*!
   \internal
 */
 int QPEApplication::defaultRotation()
 {
         if ( deforient < 0 ) {
                 QString d = getenv( "QWS_DISPLAY" );
                 if ( d.contains( "Rot90" ) ) {
                         deforient = 90;
                 }
                 else if ( d.contains( "Rot180" ) ) {
                         deforient = 180;
                 }
                 else if ( d.contains( "Rot270" ) ) {
                         deforient = 270;
                 }
                 else {
                         deforient = 0;
                 }
         }
         return deforient;
 }
 
 /*!
   \internal
 */
 void QPEApplication::setDefaultRotation( int r )
 {
         if ( qApp->type() == GuiServer ) {
                 deforient = r;
                 setenv( "QWS_DISPLAY", QString( "Transformed:Rot%1:0" ).arg( r ).latin1(), 1 );
                 Config config("qpe");
                 config.setGroup( "Rotation" );
                 config.writeEntry( "Screen", getenv("QWS_DISPLAY") );
         }
         else {
 #ifndef QT_NO_COP
                 { QCopEnvelope e( "QPE/System", "setDefaultRotation(int)" );
                         e << r;
                 }
 #endif
 
         }
 }
 
 
 /*!
   \internal
 */
 void QPEApplication::applyStyle()
 {
         Config config( "qpe" );
         config.setGroup( "Appearance" );
 
         // don't block ourselves ...
         Opie::force_appearance = 0;
 
         static QString appname = Opie::binaryName ( );
 
         QStringList ex = config. readListEntry ( "NoStyle", ';' );
         int nostyle = 0;
         for ( QStringList::Iterator it = ex. begin ( ); it != ex. end ( ); ++it ) {
                 if ( QRegExp (( *it ). mid ( 1 ), false, true ). find ( appname, 0 ) >= 0 ) {
                         nostyle = ( *it ). left ( 1 ). toInt ( 0, 32 );
                         break;
                 }
         }
 
         // Widget style
         QString style = config.readEntry( "Style", "Light" );
 
         // don't set a custom style
         if ( nostyle & Opie::Force_Style )
                 style = "Light";
 
         internalSetStyle ( style );
 
         // Colors
         QColor bgcolor( config.readEntry( "Background", "#E5E1D5" ) );
         QColor btncolor( config.readEntry( "Button", "#D6CDBB" ) );
         QPalette pal( btncolor, bgcolor );
         QString color = config.readEntry( "Highlight", "#800000" );
         pal.setColor( QColorGroup::Highlight, QColor( color ) );
         color = config.readEntry( "HighlightedText", "#FFFFFF" );
         pal.setColor( QColorGroup::HighlightedText, QColor( color ) );
         color = config.readEntry( "Text", "#000000" );
         pal.setColor( QColorGroup::Text, QColor( color ) );
         color = config.readEntry( "ButtonText", "#000000" );
         pal.setColor( QPalette::Active, QColorGroup::ButtonText, QColor( color ) );
         color = config.readEntry( "Base", "#FFFFFF" );
         pal.setColor( QColorGroup::Base, QColor( color ) );
 
         pal.setColor( QPalette::Disabled, QColorGroup::Text,
                       pal.color( QPalette::Active, QColorGroup::Background ).dark() );
 
         setPalette( pal, TRUE );
 
         // Window Decoration
         QString dec = config.readEntry( "Decoration", "Qtopia" );
 
         // don't set a custom deco
         if ( nostyle & Opie::Force_Decoration )
                 dec = "";
 
         //qDebug ( "Setting Deco: %s -- old %s (%d)", dec.latin1(), d-> decorationName.latin1(), nostyle);
 
         if ( dec != d->decorationName ) {
                 qwsSetDecoration( new QPEDecoration( dec ) );
                 d->decorationName = dec;
         }
 
         // Font
         QString ff = config.readEntry( "FontFamily", font().family() );
         int fs = config.readNumEntry( "FontSize", font().pointSize() );
 
         // don't set a custom font
         if ( nostyle & Opie::Force_Font ) {
                 ff = "Helvetica";
                 fs = 10;
         }
 
         setFont ( QFont ( ff, fs ), true );
 
         // revert to global blocking policy ...
         Opie::force_appearance = config. readBoolEntry ( "ForceStyle", false ) ? Opie::Force_All : Opie::Force_None;
         Opie::force_appearance &= ~nostyle;
 }
 
 void QPEApplication::systemMessage( const QCString& msg, const QByteArray& data )
 {
 #ifdef Q_WS_QWS
         QDataStream stream( data, IO_ReadOnly );
         if ( msg == "applyStyle()" ) {
                 applyStyle();
         }
         else if ( msg == "toggleApplicationMenu()" ) {
                 QWidget *active = activeWindow ( );
         
                 if ( active ) {
                                 QPEMenuToolFocusManager *man = QPEMenuToolFocusManager::manager ( );            
                         bool oldactive = man-> isActive ( );
 
                         man-> setActive( !man-> isActive() );
 
                         if ( !oldactive && !man-> isActive ( )) { // no menubar to toggle -> try O-Menu
                                 QCopEnvelope e ( "QPE/TaskBar", "toggleStartMenu()" );
                         }
                 }
         }
         else if ( msg == "setDefaultRotation(int)" ) {
                 if ( type() == GuiServer ) {
                         int r;
                         stream >> r;
                         setDefaultRotation( r );
                 }
         }
         else if ( msg == "setCurrentRotation(int)" ) {
-                    if ( type() == GuiServer ) {
-                        int r;
-                        stream >> r;
-                        setCurrentRotation( r );
-                }
+                int r;
+                stream >> r;
+                setCurrentRotation( r );
          }
         else if ( msg == "shutdown()" ) {
                 if ( type() == GuiServer )
                         shutdown();
         }
         else if ( msg == "quit()" ) {
                 if ( type() != GuiServer )
                         tryQuit();
         }
         else if ( msg == "forceQuit()" ) {
                 if ( type() != GuiServer )
                         quit();
         }
         else if ( msg == "restart()" ) {
                 if ( type() == GuiServer )
                         restart();
         }
         else if ( msg == "language(QString)" ) {
                 if ( type() == GuiServer ) {
                         QString l;
                         stream >> l;
                         QString cl = getenv( "LANG" );
                         if ( cl != l ) {
                                 if ( l.isNull() )
                                         unsetenv( "LANG" );
                                 else
                                         setenv( "LANG", l.latin1(), 1 );
                                 restart();
                         }
                 }
         }
         else if ( msg == "timeChange(QString)" ) {
                 QString t;
                 stream >> t;
                 if ( t.isNull() )
                         unsetenv( "TZ" );
                 else
                         setenv( "TZ", t.latin1(), 1 );
                 // emit the signal so everyone else knows...
                 emit timeChanged();
         }
         else if ( msg == "execute(QString)" ) {
                 if ( type() == GuiServer ) {
                         QString t;
                         stream >> t;
                         Global::execute( t );
                 }
         }
         else if ( msg == "execute(QString,QString)" ) {
                 if ( type() == GuiServer ) {
                         QString t, d;
                         stream >> t >> d;
                         Global::execute( t, d );
                 }
         }
         else if ( msg == "addAlarm(QDateTime,QCString,QCString,int)" ) {
                 if ( type() == GuiServer ) {
                         QDateTime when;
                         QCString channel, message;
                         int data;
                         stream >> when >> channel >> message >> data;
                         AlarmServer::addAlarm( when, channel, message, data );
                 }
         }
         else if ( msg == "deleteAlarm(QDateTime,QCString,QCString,int)" ) {
                 if ( type() == GuiServer ) {
                         QDateTime when;
                         QCString channel, message;
                         int data;
                         stream >> when >> channel >> message >> data;
                         AlarmServer::deleteAlarm( when, channel, message, data );
                 }
         }
         else if ( msg == "clockChange(bool)" ) {
                 int tmp;
                 stream >> tmp;
                 emit clockChanged( tmp );
         }
         else if ( msg == "weekChange(bool)" ) {
                 int tmp;
                 stream >> tmp;
                 emit weekChanged( tmp );
         }
         else if ( msg == "setDateFormat(DateFormat)" ) {
                 DateFormat tmp;
                 stream >> tmp;
                 emit dateFormatChanged( tmp );
         }
         else if ( msg == "setVolume(int,int)" ) {
                 int t, v;
                 stream >> t >> v;
                 setVolume( t, v );
                 emit volumeChanged( muted );
         }
         else if ( msg == "volumeChange(bool)" ) {
                 stream >> muted;
                 setVolume();
                 emit volumeChanged( muted );
         }
         else if ( msg == "setMic(int,int)" ) { // Added: 2002-02-08 by Jeremy Cowgar <jc@cowgar.com>
                 int t, v;
                 stream >> t >> v;
                 setMic( t, v );
                 emit micChanged( micMuted );
         }
         else if ( msg == "micChange(bool)" ) { // Added: 2002-02-08 by Jeremy Cowgar <jc@cowgar.com>
                 stream >> micMuted;
                 setMic();
                 emit micChanged( micMuted );
         }
         else if ( msg == "setBass(int,int)" ) { // Added: 2002-12-13 by Maximilian Reiss <harlekin@handhelds.org>
                 int t, v;
                 stream >> t >> v;
                 setBass( t, v );
         }
         else if ( msg == "bassChange(bool)" ) { // Added: 2002-12-13 by Maximilian Reiss <harlekin@handhelds.org>
                 setBass();
         }
             else if ( msg == "setTreble(int,int)" ) { // Added: 2002-12-13 by Maximilian Reiss <harlekin@handhelds.org>
                 int t, v;
                 stream >> t >> v;
                 setTreble( t, v );
         }
         else if ( msg == "trebleChange(bool)" ) { // Added: 2002-12-13 by Maximilian Reiss <harlekin@handhelds.org>
                 setTreble();
         }
 
 
 
 #endif
 }
 
 /*!
   \internal
 */
 bool QPEApplication::raiseAppropriateWindow()
 {
         bool r = FALSE;
         // ########## raise()ing main window should raise and set active
         // ########## it and then all childen. This belongs in Qt/Embedded
         QWidget *top = d->qpe_main_widget;
         if ( !top )
                 top = mainWidget();
         if ( top && d->keep_running ) {
                 if ( top->isVisible() )
                         r = TRUE;
                 else if (d->preloaded) {
                         // We are preloaded and not visible.. pretend we just started..
                         QCopEnvelope e("QPE/System", "fastAppShowing(QString)");
                         e << d->appName;
                 }
 
                 d->show_mx(top, d->nomaximize);
                 top->raise();
                 top->setActiveWindow();
         }
         QWidget *topm = activeModalWidget();
         if ( topm && topm != top ) {
                 topm->show();
                 topm->raise();
                 topm->setActiveWindow();
                 // If we haven't already handled the fastAppShowing message
                 if (!top && d->preloaded) {
                         QCopEnvelope e("QPE/System", "fastAppShowing(QString)");
                         e << d->appName;
                 }
                 r = FALSE;
         }
         return r;
 }
 
 void QPEApplication::pidMessage( const QCString& msg, const QByteArray& data)
 {
 #ifdef Q_WS_QWS
 
         if ( msg == "quit()" ) {
                 tryQuit();
         }
         else if ( msg == "quitIfInvisible()" ) {
                 if ( d->qpe_main_widget && !d->qpe_main_widget->isVisible() )
                         quit();
         }
         else if ( msg == "close()" ) {
                 hideOrQuit();
         }
         else if ( msg == "disablePreload()" ) {
                 d->preloaded = FALSE;
                 d->keep_running = TRUE;
                 /* so that quit will quit */
         }
         else if ( msg == "enablePreload()" ) {
                 if (d->qpe_main_widget)
                         d->preloaded = TRUE;
                 d->keep_running = TRUE;
                 /* so next quit won't quit */
         }
         else if ( msg == "raise()" ) {
                 d->keep_running = TRUE;
                 d->notbusysent = FALSE;
                 raiseAppropriateWindow();
                 // Tell the system we're still chugging along...
                 QCopEnvelope e("QPE/System", "appRaised(QString)");
                 e << d->appName;
         }
         else if ( msg == "flush()" ) {
                 emit flush();
                 // we need to tell the desktop
                 QCopEnvelope e( "QPE/Desktop", "flushDone(QString)" );
                 e << d->appName;
         }
         else if ( msg == "reload()" ) {
                 emit reload();
         }
         else if ( msg == "setDocument(QString)" ) {
                 d->keep_running = TRUE;
                 QDataStream stream( data, IO_ReadOnly );
                 QString doc;
                 stream >> doc;
                 QWidget *mw = mainWidget();
                 if ( !mw )
                         mw = d->qpe_main_widget;
                 if ( mw )
                         Global::setDocument( mw, doc );
         }
         else if ( msg == "nextView()" ) {
                 qDebug("got nextView()");
                 /*
                   if ( raiseAppropriateWindow() )
                 */
                 emit appMessage( msg, data);
         }
         else {
                 emit appMessage( msg, data);
         }
 
 #endif
 }
 
 
 /*!
   Sets widget \a mw as the mainWidget() and shows it. For small windows,
   consider passing TRUE for \a nomaximize rather than the default FALSE.
 
   \sa showMainDocumentWidget()
 */
 void QPEApplication::showMainWidget( QWidget* mw, bool nomaximize )
 {
         d->show(mw, nomaximize );
 }
 
 /*!
   Sets widget \a mw as the mainWidget() and shows it. For small windows,
   consider passing TRUE for \a nomaximize rather than the default FALSE.
 
   This calls designates the application as
   a \link docwidget.html document-oriented\endlink application.
 
   The \a mw widget \e must have this slot: setDocument(const QString&).
 
   \sa showMainWidget()
 */
 void QPEApplication::showMainDocumentWidget( QWidget* mw, bool nomaximize )
 {
         if ( mw && argc() == 2 )
                 Global::setDocument( mw, QString::fromUtf8(argv()[1]) );
 
         d->show(mw, nomaximize );
 }
 
 
 /*!
   If an application is started via a \link qcop.html QCop\endlink
   message, the application will process the \link qcop.html
   QCop\endlink message and then quit. If the application calls this
   function while processing a \link qcop.html QCop\endlink message,
   after processing its outstanding \link qcop.html QCop\endlink
   messages the application will start 'properly' and show itself.
 
   \sa keepRunning()
 */
 void QPEApplication::setKeepRunning()
 {
         if ( qApp && qApp->inherits( "QPEApplication" ) ) {
                 QPEApplication * qpeApp = ( QPEApplication* ) qApp;
                 qpeApp->d->keep_running = TRUE;
         }
 }
 
 /*!
   Returns TRUE if the application will quit after processing the
   current list of qcop messages; otherwise returns FALSE.
 
   \sa setKeepRunning()
 */
 bool QPEApplication::keepRunning() const
 {
         return d->keep_running;
 }
 
 /*!
   \internal
 */
 void QPEApplication::internalSetStyle( const QString &style )
 {
 #if QT_VERSION >= 300
         if ( style == "QPE" ) {
                 setStyle( new QPEStyle );
         }
         else {
                 QStyle *s = QStyleFactory::create( style );
                 if ( s )
                         setStyle( s );
         }
 #else
         if ( style == "Windows" ) {
                 setStyle( new QWindowsStyle );
         }
         else if ( style == "QPE" ) {
                 setStyle( new QPEStyle );
         }
         else if ( style == "Light" ) {
                 setStyle( new LightStyle );
         }
 #ifndef QT_NO_STYLE_PLATINUM
         else if ( style == "Platinum" ) {
                 setStyle( new QPlatinumStyle );
         }
 #endif
 #ifndef QT_NO_STYLE_MOTIF
         else if ( style == "Motif" ) {
                 setStyle( new QMotifStyle );
         }
 #endif
 #ifndef QT_NO_STYLE_MOTIFPLUS
         else if ( style == "MotifPlus" ) {
                 setStyle( new QMotifPlusStyle );
         }
 #endif
 
         else {
                 QStyle *sty = 0;
                 QString path = QPEApplication::qpeDir ( ) + "/plugins/styles/";
 
                 if ( style. find ( ".so" ) > 0 )
                         path += style;
                 else
                         path = path + "lib" + style. lower ( ) + ".so"; // compatibility
 
                 static QLibrary *lastlib = 0;
                 static StyleInterface *lastiface = 0;
 
                 QLibrary *lib = new QLibrary ( path );
                 StyleInterface *iface = 0;
 
                 if (( lib-> queryInterface ( IID_Style, ( QUnknownInterface ** ) &iface ) == QS_OK ) && iface )
                         sty = iface-> style ( );
 
                 if ( sty ) {
                         setStyle ( sty );
 
                         if ( lastiface )
                                 lastiface-> release ( );
                         lastiface = iface;
 
                         if ( lastlib ) {
                                 lastlib-> unload ( );
                                 delete lastlib;
                         }
                         lastlib = lib;
                 }
                 else {
                         if ( iface )
                                 iface-> release ( );
                         delete lib;
 
                         setStyle ( new LightStyle ( ));
                 }
         }
 #endif
 }
 
 /*!
   \internal
 */
 void QPEApplication::prepareForTermination( bool willrestart )
 {
         if ( willrestart ) {
                 // Draw a big wait icon, the image can be altered in later revisions
                 //  QWidget *d = QApplication::desktop();
                 QImage img = Resource::loadImage( "launcher/new_wait" );
                 QPixmap pix;
                 pix.convertFromImage( img.smoothScale( 1 * img.width(), 1 * img.height() ) );
                 QLabel *lblWait = new QLabel( 0, "wait hack!", QWidget::WStyle_Customize |
                                               QWidget::WStyle_NoBorder | QWidget::WStyle_Tool );
                 lblWait->setPixmap( pix );
                 lblWait->setAlignment( QWidget::AlignCenter );
                 lblWait->show();
                 lblWait->showMaximized();
         }
 #ifndef SINGLE_APP
         { QCopEnvelope envelope( "QPE/System", "forceQuit()" );
         }
         processEvents(); // ensure the message goes out.
         sleep( 1 ); // You have 1 second to comply.
 #endif
 }
 
 /*!
   \internal
 */
 void QPEApplication::shutdown()
 {
         // Implement in server's QPEApplication subclass
 }
 
 /*!
   \internal
 */
 void QPEApplication::restart()
 {
         // Implement in server's QPEApplication subclass
 }
 
 static QPtrDict<void>* stylusDict = 0;
 static void createDict()
 {
         if ( !stylusDict )
                 stylusDict = new QPtrDict<void>;
 }
 
 /*!
   Returns the current StylusMode for widget \a w.
 
   \sa setStylusOperation() StylusMode
 */
 QPEApplication::StylusMode QPEApplication::stylusOperation( QWidget* w )
 {
         if ( stylusDict )
                 return ( StylusMode ) ( int ) stylusDict->find( w );
         return LeftOnly;
 }
 
 /*!
     \enum QPEApplication::StylusMode
 
     \value LeftOnly the stylus only generates LeftButton
                        events (the default).
     \value RightOnHold the stylus generates RightButton events
                        if the user uses the press-and-hold gesture.
 
     \sa setStylusOperation() stylusOperation()
 */
 
 /*!
   Causes widget \a w to receive mouse events according to the stylus
   \a mode.
 
   \sa stylusOperation() StylusMode
 */
 void QPEApplication::setStylusOperation( QWidget * w, StylusMode mode )
 {
         createDict();
         if ( mode == LeftOnly ) {
                 stylusDict->remove
                 ( w );
                 w->removeEventFilter( qApp );
         }
         else {
                 stylusDict->insert( w, ( void* ) mode );
                 connect( w, SIGNAL( destroyed() ), qApp, SLOT( removeSenderFromStylusDict() ) );
                 w->installEventFilter( qApp );
         }
 }
 
 
 /*!
   \reimp
 */
 bool QPEApplication::eventFilter( QObject *o, QEvent *e )
 {
         if ( stylusDict && e->type() >= QEvent::MouseButtonPress && e->type() <= QEvent::MouseMove ) {
                 QMouseEvent * me = ( QMouseEvent* ) e;
                 StylusMode mode = (StylusMode)(int)stylusDict->find(o);
                 switch (mode) {
                         case RightOnHold:
                                 switch ( me->type() ) {
                                         case QEvent::MouseButtonPress:
                                                 if ( me->button() == LeftButton ) {
                                                         d->presstimer = startTimer(500); // #### pref.
                                                         d->presswidget = (QWidget*)o;
                                                         d->presspos = me->pos();
                                                         d->rightpressed = FALSE;
                                                 }
                                                 break;
                                         case QEvent::MouseMove:
                                                 if (d->presstimer && (me->pos() - d->presspos).manhattanLength() > 8) {
                                                         killTimer(d->presstimer);
                                                         d->presstimer = 0;
                                                 }
                                                 break;
                                         case QEvent::MouseButtonRelease:
                                                 if ( me->button() == LeftButton ) {
                                                         if ( d->presstimer ) {
                                                                 killTimer(d->presstimer);
                                                                 d->presstimer = 0;
                                                         }
                                                         if ( d->rightpressed && d->presswidget ) {
                                                                 // Right released
                                                                 postEvent( d->presswidget,
                                                                            new QMouseEvent( QEvent::MouseButtonRelease, me->pos(),
                                                                                             RightButton, LeftButton + RightButton ) );
                                                                 // Left released, off-widget
                                                                 postEvent( d->presswidget,
                                                                            new QMouseEvent( QEvent::MouseMove, QPoint( -1, -1),
                                                                                             LeftButton, LeftButton ) );
                                                                 postEvent( d->presswidget,
                                                                            new QMouseEvent( QEvent::MouseButtonRelease, QPoint( -1, -1),
                                                                                             LeftButton, LeftButton ) );
                                                                 d->rightpressed = FALSE;
                                                                 return TRUE; // don't send the real Left release
                                                         }
                                                 }
                                                 break;
                                         default:
                                                 break;
                                 }
                                 break;
                         default:
                                 ;
                 }
         }
         else if ( e->type() == QEvent::KeyPress || e->type() == QEvent::KeyRelease ) {
                 QKeyEvent *ke = (QKeyEvent *)e;
                 if ( ke->key() == Key_Enter ) {
                         if ( o->isA( "QRadioButton" ) || o->isA( "QCheckBox" ) ) {
                                 postEvent( o, new QKeyEvent( e->type(), Key_Space, ' ',
                                                              ke->state(), " ", ke->isAutoRepeat(), ke->count() ) );
                                 return TRUE;
                         }
                 }
         }
         return FALSE;
 }
 
 /*!
   \reimp
 */
 void QPEApplication::timerEvent( QTimerEvent *e )
 {
         if ( e->timerId() == d->presstimer && d->presswidget ) {
                 // Right pressed
                 postEvent( d->presswidget,
                            new QMouseEvent( QEvent::MouseButtonPress, d->presspos,
                                             RightButton, LeftButton ) );
                 killTimer( d->presstimer );
                 d->presstimer = 0;
                 d->rightpressed = TRUE;
         }
 }
 
 void QPEApplication::removeSenderFromStylusDict()
 {
         stylusDict->remove
         ( ( void* ) sender() );
         if ( d->presswidget == sender() )
                 d->presswidget = 0;
 }
 
 /*!
   \internal
 */
 bool QPEApplication::keyboardGrabbed() const
 {
         return d->kbgrabbed;
 }
 
 
 /*!
   Reverses the effect of grabKeyboard(). This is called automatically
   on program exit.
 */
 void QPEApplication::ungrabKeyboard()
 {
         ((QPEApplication *) qApp )-> d-> kbgrabbed = false;
 }
 
 /*!
   Grabs the physical keyboard keys, e.g. the application's launching
   keys. Instead of launching applications when these keys are pressed
   the signals emitted are sent to this application instead. Some games
   programs take over the launch keys in this way to make interaction
   easier.
 
   \sa ungrabKeyboard()
 */
 void QPEApplication::grabKeyboard()
 {
         ((QPEApplication *) qApp )-> d-> kbgrabbed = true;
 }
 
 /*!
   \reimp
 */
 int QPEApplication::exec()
 {
 #ifndef QT_NO_COP
         d->sendQCopQ();
 #endif
 
         if ( d->keep_running )
                 //|| d->qpe_main_widget && d->qpe_main_widget->isVisible() )
                 return QApplication::exec();
 
 #ifndef QT_NO_COP
 
         {
                 QCopEnvelope e( "QPE/System", "closing(QString)" );
                 e << d->appName;
         }
 #endif
         processEvents();
         return 0;
 }
 
 /*!
   \internal
   External request for application to quit.  Quits if possible without
   loosing state.
 */
 void QPEApplication::tryQuit()
 {
         if ( activeModalWidget() || strcmp( argv() [ 0 ], "embeddedkonsole" ) == 0 )
                 return ; // Inside modal loop or konsole. Too hard to save state.
 #ifndef QT_NO_COP
 
         {
                 QCopEnvelope e( "QPE/System", "closing(QString)" );
                 e << d->appName;
         }
 #endif
         processEvents();
 
         quit();
 }
 
 /*!
   \internal
   User initiated quit.  Makes the window 'Go Away'.  If preloaded this means
   hiding the window.  If not it means quitting the application.
   As this is user initiated we don't need to check state.
 */
 void QPEApplication::hideOrQuit()
 {
         processEvents();
 
         // If we are a preloaded application we don't actually quit, so emit
         // a System message indicating we're quasi-closing.
         if ( d->preloaded && d->qpe_main_widget )
 #ifndef QT_NO_COP
 
         {
                 QCopEnvelope e("QPE/System", "fastAppHiding(QString)" );
                 e << d->appName;
                 d->qpe_main_widget->hide();
         }
 #endif
         else
                 quit();
 }
 
 
 #if defined(QT_QWS_IPAQ) || defined(QT_QWS_SL5XXX)
 
 // The libraries with the skiff package (and possibly others) have
 // completely useless implementations of builtin new and delete that
 // use about 50% of your CPU. Here we revert to the simple libc
 // functions.
 
 void* operator new[]( size_t size )
 {
         return malloc( size );
 }
 
 void* operator new( size_t size )
 {
         return malloc( size );
 }
 
 void operator delete[]( void* p )
 {
         free( p );
 }
 
 void operator delete[]( void* p, size_t /*size*/ )
 {
         free( p );
 }
 
 void operator delete( void* p )
 {
         free( p );
 }
 
 void operator delete( void* p, size_t /*size*/ )
 {
         free( p );
 }
 
 #endif
 
 #if ( QT_VERSION <= 230 ) && !defined(SINGLE_APP)
 #include <qwidgetlist.h>
 #ifdef QWS
 #include <qgfx_qws.h>
 extern QRect qt_maxWindowRect;
 void qt_setMaxWindowRect(const QRect& r )
 {
         qt_maxWindowRect = qt_screen->mapFromDevice( r,
                            qt_screen->mapToDevice( QSize( qt_screen->width(), qt_screen->height() ) ) );
         // Re-resize any maximized windows
         QWidgetList* l = QApplication::topLevelWidgets();
         if ( l ) {
                 QWidget * w = l->first();
                 while ( w ) {
                         if ( w->isVisible() && w->isMaximized() ) {
                                 w->showMaximized();
                         }
                         w = l->next();
                 }
                 delete l;
         }
 }
 #endif
 #endif
diff --git a/library/qpeapplication.h b/library/qpeapplication.h
index 82954d0..4c37ea6 100644
--- a/library/qpeapplication.h
+++ b/library/qpeapplication.h
@@ -1,197 +1,192 @@
 /**********************************************************************
 ** Copyright (C) 2000-2002 Trolltech AS.  All rights reserved.
 **
 ** This file is part of the Qtopia Environment.
 **
 ** This file may be distributed and/or modified under the terms of the
 ** GNU General Public License version 2 as published by the Free Software
 ** Foundation and appearing in the file LICENSE.GPL included in the
 ** packaging of this file.
 **
 ** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
 ** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
 **
 ** See http://www.trolltech.com/gpl/ for GPL licensing information.
 **
 ** Contact info@trolltech.com if any conditions of this licensing are
 ** not clear to you.
 **
 **********************************************************************/
 #ifndef __QPE_APPLICATION_H__
 #define __QPE_APPLICATION_H__
 
 
 #include <qglobal.h>
 #include <qapplication.h>
 #include <qdialog.h>
 #include <qwsdisplay_qws.h>
 #if defined(_WS_QWS_) && !defined(Q_WS_QWS)
 #define Q_WS_QWS
 #endif
 #include "qpedecoration_qws.h"
 #include "timestring.h"
 
 #if ( defined Q_WS_QWS || defined( _WS_QWS_ ) ) && !defined( QT_NO_COP )
 #include <qpe/qcopenvelope_qws.h>
 #endif
 
 class QCopChannel;
 class QPEApplicationData;
 class QWSEvent;
 class QWSKeyEvent;
 
 
 class QPEApplication : public QApplication
 {
     Q_OBJECT
 public:
     QPEApplication( int& argc, char **argv, Type=GuiClient );
     ~QPEApplication();
 
     static QString qpeDir();
     static QString documentDir();
     void applyStyle();
     static int defaultRotation();
     static void setDefaultRotation(int r);
     static void setCurrentRotation(int r);
     static void grabKeyboard();
     static void ungrabKeyboard();
 
     enum StylusMode {
         LeftOnly,
         RightOnHold
         // RightOnHoldLeftDelayed, etc.
     };
     static void setStylusOperation( QWidget*, StylusMode );
     static StylusMode stylusOperation( QWidget* );
 
     enum InputMethodHint {
         Normal,
         AlwaysOff,
         AlwaysOn
     };
 
     enum screenSaverHint {
         Disable = 0,
         DisableLightOff = 1,
         DisableSuspend = 2,
         Enable = 100
     };
 
     static void setInputMethodHint( QWidget *, InputMethodHint );
     static InputMethodHint inputMethodHint( QWidget * );
 
     void showMainWidget( QWidget*, bool nomax=FALSE );
     void showMainDocumentWidget( QWidget*, bool nomax=FALSE );
     static void showDialog( QDialog*, bool nomax=FALSE );
     static int execDialog( QDialog*, bool nomax=FALSE );
 
     static void setKeepRunning();
     bool keepRunning() const;
 
     bool keyboardGrabbed() const;
 
     int exec();
 
 signals:
     void clientMoused();
     void timeChanged();
     void clockChanged( bool pm );
     void micChanged( bool muted );
     void volumeChanged( bool muted );
     void appMessage( const QCString& msg, const QByteArray& data);
     void weekChanged( bool startOnMonday );
     void dateFormatChanged( DateFormat );
     void flush();
     void reload();
 
 private slots:
     void systemMessage( const QCString &msg, const QByteArray &data );
     void pidMessage( const QCString &msg, const QByteArray &data );
     void removeSenderFromStylusDict();
     void hideOrQuit();
 
 protected:
     bool qwsEventFilter( QWSEvent * );
     void internalSetStyle( const QString &style );
     void prepareForTermination(bool willrestart);
     virtual void restart();
     virtual void shutdown();
     bool eventFilter( QObject *, QEvent * );
     void timerEvent( QTimerEvent * );
     bool raiseAppropriateWindow();
     virtual void tryQuit();
 
     virtual void polish ( QWidget * ); // this is actually implemented in qt_override.cpp (!)
 
 private:
     void mapToDefaultAction( QWSKeyEvent *ke, int defKey );
 
 #if defined(Q_WS_QWS) && !defined(QT_NO_COP)
     QCopChannel *sysChannel;
     QCopChannel *pidChannel;
 #endif
     QPEApplicationData *d;
 
     bool reserved_sh;
 
 
 
 };
 
 inline void QPEApplication::showDialog( QDialog* d, bool nomax )
 {
     QSize sh = d->sizeHint();
     int w = QMAX(sh.width(),d->width());
     int h = QMAX(sh.height(),d->height());
     if ( !nomax
             && ( w > qApp->desktop()->width()*3/4
                  || h > qApp->desktop()->height()*3/4 ) )
     {
         d->showMaximized();
     } else {
         d->resize(w,h);
         d->show();
     }
 }
 
 inline int QPEApplication::execDialog( QDialog* d, bool nomax )
 {
     showDialog(d,nomax);
     return d->exec();
 }
 
 enum Transformation { Rot0, Rot90, Rot180, Rot270 }; /* from qgfxtransformed_qws.cpp */
 
 inline void QPEApplication::setCurrentRotation( int r )
 {
-    if ( qApp->type() != GuiServer ) {
-        QCopEnvelope e( "QPE/System", "setCurrentRotation(int)" );
-        e << r;
-        return;
-    }
     Transformation e;
 
     switch (r) {
         case 0:
             e = Rot0;
             break;
         case 90:
             e = Rot90;
             break;
         case 180:
             e = Rot180;
             break;
         case 270:
             e = Rot270;
             break;
         default:
             return;
     }
 
     qDebug("calling qApp->desktop()->qwsDisplay()->setTransformation( %d )\n", e);
     qApp->desktop()->qwsDisplay()->setTransformation( e );
 }
 
 
 #endif