Diffstat (limited to 'noncore/net/wellenreiter/libwellenreiter/source/cardmode.cc') (more/less context) (ignore whitespace changes)
-rw-r--r-- | noncore/net/wellenreiter/libwellenreiter/source/cardmode.cc | 74 |
1 files changed, 46 insertions, 28 deletions
diff --git a/noncore/net/wellenreiter/libwellenreiter/source/cardmode.cc b/noncore/net/wellenreiter/libwellenreiter/source/cardmode.cc index 0c23922..9e0a772 100644 --- a/noncore/net/wellenreiter/libwellenreiter/source/cardmode.cc +++ b/noncore/net/wellenreiter/libwellenreiter/source/cardmode.cc @@ -1,192 +1,210 @@ /* * Set card modes for sniffing * * $Id$ */ #include "cardmode.hh" #include "wl_log.hh" /* main card into monitor function */ int card_into_monitormode (pcap_t **orighandle, char *device, int cardtype) { char CiscoRFMON[35] = "/proc/driver/aironet/"; FILE *CISCO_CONFIG_FILE; /* Checks if we have a device to sniff on */ if(device == NULL) { wl_logerr("No device given"); return 0; } /* Setting the promiscous and up flag to the interface */ if (!card_set_promisc_up(device)) { wl_logerr("Cannot set interface to promisc mode"); return 0; } wl_loginfo("Interface set to promisc mode"); /* Check the cardtype and executes the commands to go into monitor mode */ if (cardtype == CARD_TYPE_CISCO) { /* bring the sniffer into rfmon mode */ snprintf(CiscoRFMON, sizeof(CiscoRFMON) - 1, DEFAULT_PATH, device); if((CISCO_CONFIG_FILE = fopen(CiscoRFMON,"w")) == NULL) { wl_logerr("Cannot open config file: %s", strerror(errno)); return 0; } fputs ("Mode: r",CISCO_CONFIG_FILE); fputs ("Mode: y",CISCO_CONFIG_FILE); fputs ("XmitPower: 1",CISCO_CONFIG_FILE); fclose(CISCO_CONFIG_FILE); } else if (cardtype == CARD_TYPE_NG) { char wlanngcmd[62]; - snprintf(wlanngcmd, sizeof(wlanngcmd) - 1, "%s %s lnxreq_wlansniff channel=1 enable=true", WLANCTL_PATH, device); + snprintf(wlanngcmd, sizeof(wlanngcmd) - 1, "$(which wlanctl-ng) %s lnxreq_wlansniff channel=%d enable=true", device, 1); if (system(wlanngcmd) != 0) { wl_logerr("Could not set %s in raw mode, check cardtype", device); return 0; } } else if (cardtype == CARD_TYPE_HOSTAP) { wl_logerr("Got a host-ap card, nothing is implemented now"); char hostapcmd[250]; - snprintf(hostapcmd, sizeof(hostapcmd) -1, "%s %s monitor 2", IWPRIV_PATH, device); + snprintf(hostapcmd, sizeof(hostapcmd) -1, "$(which iwpriv) %s monitor 2 %d", device,1); if (system(hostapcmd) !=0) { wl_logerr("Could not set %s in raw mode, check cardtype", device); return 0; } } - else if (cardtype == CARD_TYPE_ORINOCCO) + else if (cardtype == CARD_TYPE_ORINOCCO || cardtype == CARD_TYPE_HOSTAP) { - char lucentcmd[62]; - snprintf(lucentcmd, sizeof(lucentcmd) - 1, "$(which iwpriv) %s monitor 2 %d", device, 1); - if (system(lucentcmd) != 0) - { - wl_logerr("Could not set %s in raw mode, check cardtype", device); - return 0; + if (!card_set_channel (device, 1, CARD_TYPE_ORINOCCO)) + { + wl_logerr("Could not set %s in raw mode, check cardtype", device); + return 0; } else { - wl_loginfo("Successfully set %s into raw mode",device); + wl_loginfo("Successfully set %s into raw mode",device); } } /* Setting the promiscous and up flag to the interface */ if (!card_check_rfmon_datalink(device)) { wl_logerr("Cannot set interface to rfmon mode"); return 0; } else { wl_loginfo("Interface set to rfmon mode"); } return 1; } /* Check card is in the rfmon mode */ int card_check_rfmon_datalink (char *device) { int datalinktype=0; pcap_t *phandle; phandle = pcap_open_live(device, 65,0,0,NULL); datalinktype = pcap_datalink (phandle); pcap_close(phandle); if (datalinktype != DLT_IEEE802_11) /* Rawmode is IEEE802_11 */ { return 0; } else { wl_loginfo("Your successfully listen on %s in 802.11 raw mode", device); return 1; } } /* Set card into promisc mode */ int card_set_promisc_up (const char *device) { int err; /* First generate a socket to use with iocalls */ int fd = socket(AF_INET, SOCK_DGRAM, 0); if (fd < 0) { /* In case of an error */ perror("socket"); return 0; } /* Fill an empty an interface structure with the right flags (UP and Promsic) */ struct ifreq ifr; strncpy(ifr.ifr_name, device,10); ifr.ifr_flags = IFF_UP + IFF_PROMISC; err = ioctl(fd, SIOCSIFFLAGS, &ifr); if (err < 0) { perror("Could not access the interface, "); return 0; } /* Get the informations back from the interface to check if the flags are correct */ strncpy(ifr.ifr_name, device,10); ioctl(fd, SIOCGIFFLAGS, &ifr); if (err < 0) { perror("Could not access the interface, "); return 0; } if(ifr.ifr_flags && IFF_UP) { printf("%s is ok\n", device); return 1; } else { printf("%s flags could not be set", device); return 0; } } /* Set channel (Wireless frequency) of the device */ int card_set_channel (const char *device, int channel, int cardtype) { if (cardtype == CARD_TYPE_CISCO) { /* Cisco cards don't need channelswitching */ return 1; } /* If it is a lucent orinocco card */ - else if (cardtype == CARD_TYPE_ORINOCCO) + else if (cardtype == CARD_TYPE_ORINOCCO || cardtype == CARD_TYPE_HOSTAP) { - char lucentreset[63]; - char lucentcmd[62]; - snprintf(lucentreset, sizeof(lucentreset) -1,"$(which iwpriv) %s force_reset", device); - if (system(lucentreset) != 0) - { - wl_logerr("Could not reset the card %s",device); - return 0; - } - snprintf(lucentcmd, sizeof(lucentcmd) - 1, "$(which iwpriv) %s monitor 2 %d", device, channel); - if (system(lucentcmd) != 0) - { - wl_logerr("Could not set %s in raw mode, check cardtype", device); - return 0; - } - wl_loginfo("Channel %d set on interface %s",channel,device); - return 1; + int fd; + //Wireless tools structure for the iocalls + struct iwreq ireq; + int *ptr; + /* Socket needed to use the iocall to */ + fd = socket(AF_INET, SOCK_STREAM, 0); + if ( fd == -1 ) { + return -1; + } + ptr = (int *) ireq.u.name; + // This is the monitor mode for 802.11 non-prism header + ptr[0] = 2; + ptr[1] = channel; + strcpy(ireq.ifr_ifrn.ifrn_name, device); + if (ioctl( fd, SIOCIWFIRSTPRIV + 0x8, &ireq)==0) + { + /* All was fine... */ + // close(fd); + wl_loginfo("Set channel %d on interface %s",channel, device); + return 1; + } + else + { /* iocall does not work */ + wl_logerr("Could not set channel %d on %s, check cardtype",channel, device); + return 0; + } } - + else if (cardtype == CARD_TYPE_NG) + { + char wlanngcmd[62]; + snprintf(wlanngcmd, sizeof(wlanngcmd) - 1, "$(which wlanctl-ng) %s lnxreq_wlansniff channel=%d enable=true", device, channel); + if (system(wlanngcmd) != 0) + { + wl_logerr("Could not set channel %d on %s, check cardtype",channel, device); + return 0; + } + + } /* For undefined situations */ return 0; } |