42 files changed, 982 insertions, 147 deletions
diff --git a/noncore/net/mailit/emailclient.cpp b/noncore/net/mailit/emailclient.cpp index 90664bb..8359acf 100644 --- a/noncore/net/mailit/emailclient.cpp +++ b/noncore/net/mailit/emailclient.cpp @@ -281,7 +281,7 @@ void EmailClient::sendQuedMail() int count = 0; if (accountList.count() == 0) { - QMessageBox::warning(qApp->activeWindow(), "No account selected", "You must create an account", "OK\n"); + QMessageBox::warning(qApp->activeWindow(), tr("No account selected"), tr("You must create an account"), "OK\n"); return; } //traverse listview, find messages to send @@ -321,8 +321,8 @@ void EmailClient::mailSent() void EmailClient::getNewMail() { if (accountList.count() == 0) { - QMessageBox::warning(qApp->activeWindow(),"No account selected", - "You must create an account", "OK\n"); + QMessageBox::warning(qApp->activeWindow(),tr("No account selected"), + tr("You must create an account"), "OK\n"); return; } @@ -785,7 +785,7 @@ void EmailClient::selectAccount(int id) emit newCaption("Mailit - " + currentAccount->accountName); getNewMail(); } else { - emit newCaption("Mailit ! No account defined"); + emit newCaption( tr("Mailit ! No account defined") ); } } @@ -825,7 +825,7 @@ void EmailClient::deleteAccount(int id) QString message; newAccount = accountList.at(id); - message = "Delete account:\n" + newAccount->accountName; + message = tr("Delete account:\n") + newAccount->accountName; switch( QMessageBox::warning( this, "Mailit", message, "Yes", "No", 0, 0, 1 ) ) { @@ -846,7 +846,7 @@ void EmailClient::updateAccounts() selectAccountMenu->clear(); deleteAccountMenu->clear(); - newAccountId = editAccountMenu->insertItem("New", this, + newAccountId = editAccountMenu->insertItem( tr("New"), this, SLOT(editAccount(int)) ); editAccountMenu->insertSeparator(); diff --git a/noncore/net/mailit/emaillistitem.cpp b/noncore/net/mailit/emaillistitem.cpp index fc9f766..a25f93a 100644 --- a/noncore/net/mailit/emaillistitem.cpp +++ b/noncore/net/mailit/emaillistitem.cpp @@ -38,7 +38,8 @@ EmailListItem::EmailListItem(QListView *parent, Email mailIn, bool inbox) setText(0, temp); } setText(1, mail.subject); - setText(2,mail.date); + // setText(2,mail.date); + setText(2,dateFromULCString(mail.date)); if (mailIn.files.count()>0) { @@ -97,3 +98,61 @@ void EmailListItem::paintCell( QPainter *p, const QColorGroup &cg, _cg.setColor( QColorGroup::Text, c ); } + +/* + * Converts an E-Mail date (ULC) RFC 2822 conform to a QDateTime. + * Returning a QString with formatting of "YYYY-MM-DD HH:MM:SS" + * (zodiac: This method was tested with more than 300 inbox mails, + * it didn't slow down the loading of mail-it.) + */ +QString EmailListItem::dateFromULCString( QString ulcDate ) +{ + QString sTemp, sTime; + int iPos, iDay, iMon=1, iYear; + + iPos=ulcDate.find(','); + if (iPos) { // it has a day-of-week + ulcDate=ulcDate.remove(0,++iPos); //.stripWhiteSpace(); + } + + QStringList dateEntries = QStringList::split(" ",ulcDate,FALSE); + QStringList::Iterator iter = dateEntries.begin(); + + // Get day as DD + iDay = (*iter++).toInt(); + + // Get month as string Mmm + sTemp = (*iter++); + if (sTemp =="Jan") {iMon=1;} else + if (sTemp =="Feb") {iMon=2;} else + if (sTemp =="Mar") {iMon=3;} else + if (sTemp =="Apr") {iMon=4;} else + if (sTemp =="May") {iMon=5;} else + if (sTemp =="Jun") {iMon=6;} else + if (sTemp =="Jul") {iMon=7;} else + if (sTemp =="Aug") {iMon=8;} else + if (sTemp =="Sep") {iMon=9;} else + if (sTemp =="Oct") {iMon=10;} else + if (sTemp =="Nov") {iMon=11;} else + if (sTemp =="Dec") {iMon=12;} + + // Get year as YYYY or YY + iYear = (*iter++).toInt(); + + QDate date = QDate(iYear, iMon, iDay); + + // Convert timestring into a QTime + QStringList timeEntries = QStringList::split(":",(*iter++),FALSE); + QStringList::Iterator iterTime = timeEntries.begin(); + iYear=(*iterTime++).toInt(); // var reuse.. *cough* + iMon=(*iterTime++).toInt(); + iDay=(*iterTime++).toInt(); + QTime time = QTime(iYear,iMon,iDay); + + return QString::number(date.year())+"-" + +QString::number(date.month()).rightJustify(2,'0')+"-" + +QString::number(date.day()).rightJustify(2,'0')+" " + +time.toString(); +} + + diff --git a/noncore/net/mailit/emaillistitem.h b/noncore/net/mailit/emaillistitem.h index 642932c..129a774 100644 --- a/noncore/net/mailit/emaillistitem.h +++ b/noncore/net/mailit/emaillistitem.h @@ -39,6 +39,7 @@ protected: private: Email mail; bool selected; + QString dateFromULCString( QString ulc ); }; #endif diff --git a/noncore/net/mailit/mailit.pro b/noncore/net/mailit/mailit.pro index 5e9a83a..0224886 100644 --- a/noncore/net/mailit/mailit.pro +++ b/noncore/net/mailit/mailit.pro @@ -1,6 +1,5 @@ -TEMPLATE = app TARGET = mailit -CONFIG = qt warn_on release +CONFIG = qt warn_on release quick-app HEADERS = emailclient.h \ emailhandler.h \ emaillistitem.h \ @@ -37,9 +36,6 @@ INCLUDEPATH += $(OPIEDIR)/include DEPENDPATH += $(OPIEDIR)/include LIBS += -lqpe -lopie # -lssl -MOC_DIR=qpeobj -OBJECTS_DIR=qpeobj -DESTDIR=$(OPIEDIR)/bin TRANSLATIONS = ../../../i18n/de/mailit.ts \ ../../../i18n/nl/mailit.ts \ diff --git a/noncore/net/mailit/mailitwindow.h b/noncore/net/mailit/mailitwindow.h index e818d32..11e56b9 100644 --- a/noncore/net/mailit/mailitwindow.h +++ b/noncore/net/mailit/mailitwindow.h @@ -33,6 +33,7 @@ class MailItWindow: public QMainWindow { Q_OBJECT public: + static QString appName() { return QString::fromLatin1("mailit"); } MailItWindow(QWidget *parent = 0, const char *name = 0, WFlags fl = 0); ~MailItWindow(); diff --git a/noncore/net/mailit/main.cpp b/noncore/net/mailit/main.cpp index 3a3e1fc..71f8877 100644 --- a/noncore/net/mailit/main.cpp +++ b/noncore/net/mailit/main.cpp @@ -20,10 +20,6 @@ #include <qpe/qpeapplication.h> #include "mailitwindow.h" -int main(int argc, char* argv[]) -{ - QPEApplication a( argc, argv ); - MailItWindow mw(0, 0); - a.showMainDocumentWidget(&mw); - return a.exec(); -} +#include <opie/oapplicationfactory.h> + +OPIE_EXPORT_APP( OApplicationFactory<MailItWindow> )
\ No newline at end of file diff --git a/noncore/net/opieftp/main.cpp b/noncore/net/opieftp/main.cpp index 4f5a7d4..0217e41 100644 --- a/noncore/net/opieftp/main.cpp +++ b/noncore/net/opieftp/main.cpp @@ -10,18 +10,7 @@ * the Free Software Foundation; either version 2 of the License, or * * (at your option) any later version. * ***************************************************************************/ -#include <qpe/qpeapplication.h> - - - +#include <opie/oapplicationfactory.h> #include "opieftp.h" -int main(int argc, char *argv[]) -{ - QPEApplication a(argc, argv); - - OpieFtp opieftp; - a.showMainWidget( &opieftp); - return a.exec(); -} - +OPIE_EXPORT_APP( OApplicationFactory<OpieFtp> ) diff --git a/noncore/net/opieftp/opieftp.cpp b/noncore/net/opieftp/opieftp.cpp index 269449e..ee7d32f 100644 --- a/noncore/net/opieftp/opieftp.cpp +++ b/noncore/net/opieftp/opieftp.cpp @@ -57,8 +57,8 @@ static int log_progress(netbuf *, int xfered, void *) return 1; } -OpieFtp::OpieFtp( ) - : QMainWindow( ) +OpieFtp::OpieFtp( QWidget* parent, const char* name, WFlags fl) + : QMainWindow( parent, name, fl ) { setCaption( tr( "OpieFtp" ) ); fuckeduphack=FALSE; @@ -270,17 +270,17 @@ OpieFtp::OpieFtp( ) connect( serverListView, SIGNAL( highlighted( const QString &)), this,SLOT( serverListClicked( const QString &) ) ); - connectServerBtn = new QPushButton( "Connect", tab_3 , "ConnectButton" ); + connectServerBtn = new QPushButton( tr("Connect"), tab_3 , "ConnectButton" ); tabLayout_3->addMultiCellWidget( connectServerBtn, 6, 6, 0, 1); connectServerBtn->setToggleButton(TRUE); connect(connectServerBtn,SIGNAL( toggled( bool)),SLOT( connectorBtnToggled(bool) )); - newServerButton= new QPushButton( "Add", tab_3 , "NewServerButton" ); + newServerButton= new QPushButton( tr("Add"), tab_3 , "NewServerButton" ); tabLayout_3->addMultiCellWidget( newServerButton, 6, 6, 2, 2); connect( newServerButton,SIGNAL( clicked()),SLOT( NewServer() )); QPushButton *deleteServerBtn; - deleteServerBtn = new QPushButton( "Delete", tab_3 , "OpenButton" ); + deleteServerBtn = new QPushButton( tr("Delete"), tab_3 , "OpenButton" ); tabLayout_3->addMultiCellWidget( deleteServerBtn, 6, 6, 3, 3); connect(deleteServerBtn,SIGNAL(clicked()),SLOT(deleteServer())); diff --git a/noncore/net/opieftp/opieftp.h b/noncore/net/opieftp/opieftp.h index 9d5d211..7bd615a 100644 --- a/noncore/net/opieftp/opieftp.h +++ b/noncore/net/opieftp/opieftp.h @@ -47,9 +47,10 @@ class OpieFtp : public QMainWindow Q_OBJECT public: - OpieFtp( ); + OpieFtp( QWidget* parent = 0, const char* name = 0, WFlags fl = 0 ); ~OpieFtp(); + static QString appName() { return QString::fromLatin1("opieftp"); } QTabWidget *TabWidget; QWidget *tab, *tab_2, *tab_3; QListView *Local_View, *Remote_View; diff --git a/noncore/net/opieftp/opieftp.pro b/noncore/net/opieftp/opieftp.pro index ac16819..185c341 100644 --- a/noncore/net/opieftp/opieftp.pro +++ b/noncore/net/opieftp/opieftp.pro @@ -1,9 +1,7 @@ -TEMPLATE = app -CONFIG += qt warn_on release +CONFIG += qt warn_on release quick-app HEADERS = opieftp.h inputDialog.h SOURCES = opieftp.cpp inputDialog.cpp main.cpp TARGET = opieftp -DESTDIR = $(OPIEDIR)/bin INCLUDEPATH += $(OPIEDIR)/include DEPENDPATH += $(OPIEDIR)/include LIBS += -lqpe -lftplib diff --git a/noncore/net/opieirc/.cvsignore b/noncore/net/opieirc/.cvsignore index 39391f4..d5423d6 100644 --- a/noncore/net/opieirc/.cvsignore +++ b/noncore/net/opieirc/.cvsignore @@ -1,3 +1,4 @@ Makefile Makefile.in moc_*.cpp +.moc
\ No newline at end of file diff --git a/noncore/net/opieirc/main.cpp b/noncore/net/opieirc/main.cpp index 43e63af..39acfcc 100644 --- a/noncore/net/opieirc/main.cpp +++ b/noncore/net/opieirc/main.cpp @@ -1,10 +1,7 @@ #include <qpe/qpeapplication.h> #include "mainwindow.h" -int main(int argc, char **argv) { - QPEApplication a(argc, argv); - MainWindow mw; - a.showMainWidget(&mw); - return a.exec(); -} +#include <opie/oapplicationfactory.h> + +OPIE_EXPORT_APP( OApplicationFactory<MainWindow> ) diff --git a/noncore/net/opieirc/mainwindow.h b/noncore/net/opieirc/mainwindow.h index bd1a9ce..0f60855 100644 --- a/noncore/net/opieirc/mainwindow.h +++ b/noncore/net/opieirc/mainwindow.h @@ -35,6 +35,7 @@ public: // IRCTabWidget getTabWidget(); void addTab(IRCTab *tab); void killTab(IRCTab *tab); + static QString appName() { return QString::fromLatin1("opieirc"); } signals: void updateScroll(); protected slots: diff --git a/noncore/net/opieirc/opieirc.pro b/noncore/net/opieirc/opieirc.pro index 8b09e18..537f810 100644 --- a/noncore/net/opieirc/opieirc.pro +++ b/noncore/net/opieirc/opieirc.pro @@ -1,6 +1,4 @@ -TEMPLATE = app -CONFIG = qt warn_on release -DESTDIR = $(OPIEDIR)/bin +CONFIG = qt warn_on release quick-app HEADERS = ircchannel.h ircconnection.h \ ircmessage.h \ ircmessageparser.h ircoutput.h \ @@ -21,8 +19,7 @@ SOURCES = ircchannel.cpp ircconnection.cpp \ INCLUDEPATH += $(OPIEDIR)/include DEPENDPATH += $(OPIEDIR)/include LIBS += -lqpe -lopie -TARGET = opieirc - +TARGET = opieirc include ( $(OPIEDIR)/include.pro ) diff --git a/noncore/net/opietooth/blue-pin/blue-pin.pro b/noncore/net/opietooth/blue-pin/blue-pin.pro index 102a937..fbf9dbe 100644 --- a/noncore/net/opietooth/blue-pin/blue-pin.pro +++ b/noncore/net/opietooth/blue-pin/blue-pin.pro @@ -1,6 +1,4 @@ -TEMPLATE = app -#CONFIG = qt warn_on debug -CONFIG = qt warn_on release +CONFIG = qt warn_on release quick-app HEADERS = pindlg.h SOURCES = main.cc pindlg.cc INCLUDEPATH += $(OPIEDIR)/include @@ -8,7 +6,6 @@ INCLUDEPATH += $(OPIEDIR)/noncore/opietooth/lib DEPENDPATH += $(OPIEDIR)/include LIBS += -lqpe INTERFACES = pindlgbase.ui -DESTDIR = $(OPIEDIR)/bin TARGET = bluepin TRANSLATIONS = ../../../../i18n/de/bluepin.ts \ @@ -30,5 +27,4 @@ TRANSLATIONS = ../../../../i18n/de/bluepin.ts \ ../../../../i18n/zh_TW/bluepin.ts - include ( $(OPIEDIR)/include.pro ) diff --git a/noncore/net/opietooth/manager/.cvsignore b/noncore/net/opietooth/manager/.cvsignore index 3fb67fe..19c03a7 100644 --- a/noncore/net/opietooth/manager/.cvsignore +++ b/noncore/net/opietooth/manager/.cvsignore @@ -7,3 +7,7 @@ devicedialog.h moc_* scandialog.cpp scandialog.h +rfcommassigndialogbase.cpp +rfcommassigndialogbase.h +rfcommdialogitembase.cpp +rfcommdialogitembase.h diff --git a/noncore/net/opietooth/manager/bluebase.cpp b/noncore/net/opietooth/manager/bluebase.cpp index 54808fa..2e68984 100644 --- a/noncore/net/opietooth/manager/bluebase.cpp +++ b/noncore/net/opietooth/manager/bluebase.cpp @@ -20,6 +20,7 @@ #include "hciconfwrapper.h" #include "devicehandler.h" #include "btconnectionitem.h" +#include "rfcommassigndialogimpl.h" #include <remotedevice.h> #include <services.h> @@ -59,6 +60,8 @@ BlueBase::BlueBase( QWidget* parent, const char* name, WFlags fl ) connect( PushButton2, SIGNAL( clicked() ), this, SLOT(startScan() ) ); connect( configApplyButton, SIGNAL(clicked() ), this, SLOT(applyConfigChanges() ) ); + + connect( rfcommBindButton, SIGNAL( clicked() ), this, SLOT( rfcommDialog() ) ); // not good since lib is async // connect( ListView2, SIGNAL( expanded ( QListViewItem* ) ), // this, SLOT( addServicesToDevice( QListViewItem * ) ) ); @@ -245,6 +248,20 @@ void BlueBase::applyConfigChanges() { } /** + * Launch Rfcomm Bind dialog + * + */ +void BlueBase::rfcommDialog() { + RfcommAssignDialog rfcommAssign ( this, "RfcommAssignDialog", true, WStyle_ContextHelp ); + + rfcommAssign.showMaximized(); + + if ( rfcommAssign.exec() == QDialog::Accepted ) { + rfcommAssign.saveConfig(); + } +} + +/** * Add fresh found devices from scan dialog to the listing * */ diff --git a/noncore/net/opietooth/manager/bluebase.h b/noncore/net/opietooth/manager/bluebase.h index 743062c..a8ab3db 100644 --- a/noncore/net/opietooth/manager/bluebase.h +++ b/noncore/net/opietooth/manager/bluebase.h @@ -41,12 +41,15 @@ namespace OpieTooth { BlueBase( QWidget* parent = 0, const char* name = 0, WFlags fl = 0 ); ~BlueBase(); + static QString appName() { return QString::fromLatin1("bluetooth-manager"); } + protected: private slots: void startScan(); + private: bool find( const RemoteDevice& device ); void readConfig(); @@ -89,6 +92,7 @@ namespace OpieTooth { void applyConfigChanges(); void addSignalStrength(); void addSignalStrength( const QString& mac, const QString& strengh ); + void rfcommDialog(); }; diff --git a/noncore/net/opietooth/manager/bluetoothbase.ui b/noncore/net/opietooth/manager/bluetoothbase.ui index 9ff970f..bb906a1 100644 --- a/noncore/net/opietooth/manager/bluetoothbase.ui +++ b/noncore/net/opietooth/manager/bluetoothbase.ui @@ -11,8 +11,8 @@ <rect> <x>0</x> <y>0</y> - <width>224</width> - <height>320</height> + <width>258</width> + <height>407</height> </rect> </property> <property stdset="1"> @@ -25,21 +25,21 @@ <property> <name>layoutSpacing</name> </property> - <vbox> - <property stdset="1"> - <name>margin</name> - <number>0</number> - </property> - <property stdset="1"> - <name>spacing</name> - <number>0</number> - </property> <widget> <class>QTabWidget</class> <property stdset="1"> <name>name</name> <cstring>Status</cstring> </property> + <property stdset="1"> + <name>geometry</name> + <rect> + <x>1</x> + <y>1</y> + <width>245</width> + <height>289</height> + </rect> + </property> <property> <name>layoutMargin</name> </property> @@ -203,17 +203,36 @@ <vbox> <property stdset="1"> <name>margin</name> - <number>2</number> + <number>11</number> </property> <property stdset="1"> <name>spacing</name> - <number>2</number> + <number>6</number> + </property> + <widget> + <class>QGroupBox</class> + <property stdset="1"> + <name>name</name> + <cstring>GroupBox1</cstring> + </property> + <property stdset="1"> + <name>title</name> + <string>Bluetooh Basic Config</string> + </property> + <vbox> + <property stdset="1"> + <name>margin</name> + <number>11</number> + </property> + <property stdset="1"> + <name>spacing</name> + <number>6</number> </property> <widget> <class>QLayoutWidget</class> <property stdset="1"> <name>name</name> - <cstring>Layout2</cstring> + <cstring>Layout7</cstring> </property> <hbox> <property stdset="1"> @@ -225,6 +244,21 @@ <number>6</number> </property> <widget> + <class>QLayoutWidget</class> + <property stdset="1"> + <name>name</name> + <cstring>Layout6</cstring> + </property> + <vbox> + <property stdset="1"> + <name>margin</name> + <number>0</number> + </property> + <property stdset="1"> + <name>spacing</name> + <number>6</number> + </property> + <widget> <class>QLabel</class> <property stdset="1"> <name>name</name> @@ -236,21 +270,25 @@ </property> </widget> <widget> - <class>QLineEdit</class> + <class>QLabel</class> <property stdset="1"> <name>name</name> - <cstring>deviceNameLine</cstring> + <cstring>passkeyLabel</cstring> + </property> + <property stdset="1"> + <name>text</name> + <string>Default Passkey</string> </property> </widget> - </hbox> + </vbox> </widget> <widget> <class>QLayoutWidget</class> <property stdset="1"> <name>name</name> - <cstring>Layout3</cstring> + <cstring>Layout5</cstring> </property> - <hbox> + <vbox> <property stdset="1"> <name>margin</name> <number>0</number> @@ -260,14 +298,10 @@ <number>6</number> </property> <widget> - <class>QLabel</class> + <class>QLineEdit</class> <property stdset="1"> <name>name</name> - <cstring>passkeyLabel</cstring> - </property> - <property stdset="1"> - <name>text</name> - <string>Default Passkey</string> + <cstring>deviceNameLine</cstring> </property> </widget> <widget> @@ -281,6 +315,8 @@ <enum>Password</enum> </property> </widget> + </vbox> + </widget> </hbox> </widget> <widget> @@ -358,6 +394,19 @@ </vbox> </widget> <widget> + <class>QPushButton</class> + <property stdset="1"> + <name>name</name> + <cstring>rfcommBindButton</cstring> + </property> + <property stdset="1"> + <name>text</name> + <string>Rfcomm Bind Table</string> + </property> + </widget> + </vbox> + </widget> + <widget> <class>QWidget</class> <property stdset="1"> <name>name</name> @@ -390,6 +439,5 @@ </vbox> </widget> </widget> - </vbox> </widget> </UI> diff --git a/noncore/net/opietooth/manager/main.cpp b/noncore/net/opietooth/manager/main.cpp index a86e36d..82aeebd 100644 --- a/noncore/net/opietooth/manager/main.cpp +++ b/noncore/net/opietooth/manager/main.cpp @@ -19,20 +19,7 @@ #include "bluebase.h" #include <qpe/qpeapplication.h> +#include <opie/oapplicationfactory.h> - -QPEApplication *BluetoothApp; - -int main( int argc, char ** argv ) { - QPEApplication a(argc, argv); - BluetoothApp=&a; - - OpieTooth::BlueBase t; - - // t.setCaption( OpieTooth::BlueBase::tr("Bluetooth Manager") ); - a.showMainWidget(&t); - - return a.exec(); -} - +OPIE_EXPORT_APP( OApplicationFactory<OpieTooth::BlueBase> ) diff --git a/noncore/net/opietooth/manager/manager.pro b/noncore/net/opietooth/manager/manager.pro index 9841740..6ff4ebb 100644 --- a/noncore/net/opietooth/manager/manager.pro +++ b/noncore/net/opietooth/manager/manager.pro @@ -1,14 +1,13 @@ -TEMPLATE = app -CONFIG = qt warn_on debug -#CONFIG = qt warn_on release +CONFIG = qt warn_on release quick-app HEADERS = btconnectionitem.h btdeviceitem.h \ btserviceitem.h stdpopups.h \ popuphelper.h bluebase.h \ scandialog.h btlistitem.h \ hciconfwrapper.h bticonloader.h \ pppdialog.h obexdialog.h \ + rfcommassigndialogimpl.h rfcommassigndialogitem.h \ devicehandler.h rfcpopup.h obexpopup.h \ - rfcommhelper.h panpopup.h dunpopup.h + rfcommhelper.h panpopup.h dunpopup.h rfcommconfhandler.h SOURCES = btconnectionitem.cpp btdeviceitem.cpp \ btserviceitem.cpp stdpopups.cpp \ @@ -16,15 +15,16 @@ SOURCES = btconnectionitem.cpp btdeviceitem.cpp \ bluebase.cpp scandialog.cpp \ btlistitem.cpp hciconfwrapper.cpp \ bticonloader.cpp pppdialog.cpp \ + rfcommassigndialogimpl.cpp rfcommassigndialogitem.cpp \ obexdialog.cpp devicehandler.cpp \ rfcpopup.cpp obexpopup.cpp \ - rfcommhelper.cpp panpopup.cpp dunpopup.cpp + rfcommhelper.cpp panpopup.cpp dunpopup.cpp rfcommconfhandler.cpp INCLUDEPATH += $(OPIEDIR)/include INCLUDEPATH += $(OPIEDIR)/noncore/net/opietooth/lib DEPENDPATH += $(OPIEDIR)/include LIBS += -lqpe -lopietooth -lopie -INTERFACES = bluetoothbase.ui devicedialog.ui -DESTDIR = $(OPIEDIR)/bin +INTERFACES = bluetoothbase.ui devicedialog.ui rfcommassigndialogbase.ui rfcommdialogitembase.ui + TARGET = bluetooth-manager TRANSLATIONS = ../../../../i18n/de/bluetooth-manager.ts \ diff --git a/noncore/net/opietooth/manager/rfcommassigndialogbase.ui b/noncore/net/opietooth/manager/rfcommassigndialogbase.ui new file mode 100644 index 0000000..aefa698 --- a/dev/null +++ b/noncore/net/opietooth/manager/rfcommassigndialogbase.ui @@ -0,0 +1,44 @@ +<!DOCTYPE UI><UI> +<class>RfcommAssignDialogBase</class> +<widget> + <class>QDialog</class> + <property stdset="1"> + <name>name</name> + <cstring>RfcommAssignDialogBase</cstring> + </property> + <property stdset="1"> + <name>geometry</name> + <rect> + <x>0</x> + <y>0</y> + <width>444</width> + <height>343</height> + </rect> + </property> + <property stdset="1"> + <name>caption</name> + <string>Rfcomm Bind</string> + </property> + <vbox> + <property stdset="1"> + <name>margin</name> + <number>11</number> + </property> + <property stdset="1"> + <name>spacing</name> + <number>6</number> + </property> + <widget> + <class>QLabel</class> + <property stdset="1"> + <name>name</name> + <cstring>TextLabel1</cstring> + </property> + <property stdset="1"> + <name>text</name> + <string>Bind device to a interface</string> + </property> + </widget> + </vbox> +</widget> +</UI> diff --git a/noncore/net/opietooth/manager/rfcommassigndialogimpl.cpp b/noncore/net/opietooth/manager/rfcommassigndialogimpl.cpp new file mode 100644 index 0000000..b5cc074 --- a/dev/null +++ b/noncore/net/opietooth/manager/rfcommassigndialogimpl.cpp @@ -0,0 +1,120 @@ + +#include "rfcommassigndialogimpl.h" +#include "rfcommassigndialogitem.h" +#include "rfcommconfhandler.h" + +#include <qpe/config.h> + +#include <qlayout.h> + +using namespace OpieTooth; + +// TODO: write only the file in bluebase? +// muss rfcommd dann neu gestartet werden +// sollte rfcomm bind all nicht eh default config sein ( polled das? - d.h. sobald nen gerät in der nähe ist bindet es? + + +RfcommAssignDialog::RfcommAssignDialog( QWidget* parent, const char* name, bool modal, WFlags fl ) + : RfcommAssignDialogBase( parent, name, modal, fl ) { + + m_range = 5; + + m_scrollView = new QScrollView( this ); + m_scrollView->setResizePolicy( QScrollView::AutoOneFit ); + m_scrollView->setHScrollBarMode( QScrollView::AlwaysOff ); + + RfcommAssignDialogBaseLayout->addWidget( m_scrollView ); + + m_box = new QVBox( m_scrollView->viewport() ); + m_scrollView->addChild( m_box ); + + confHandler = new RfCommConfHandler( "/etc/bluetooth/rfcomm.conf" ); + + loadConfig(); +} + +RfcommAssignDialog::~RfcommAssignDialog() { + if ( confHandler ) { + delete confHandler; + } +} + + +void RfcommAssignDialog::newDevice( const QString & mac ) { + + for ( int i = 0 ; i < m_range; i++ ) { + + QMap<QString, RfCommConfObject*>::Iterator it; + it = confHandler->foundEntries().find( QString("%1").arg( i ) ); + // make sure that rfcommX is not assigned yet + if ( it == confHandler->foundEntries().end() ) { + QDialog dialog( this, "newdevice", true, WStyle_ContextHelp ); + dialog.showMaximized(); + RfcommDialogItem *newDev = new RfcommDialogItem( &dialog ); + newDev->setIdent( i ); + newDev->setMac( mac ); + + if ( dialog.exec() == QDialog::Accepted ) { + RfcommDialogItem *rfcomm = new RfcommDialogItem( m_box ); + m_itemList.insert( i , rfcomm ); + rfcomm->setIdent( i ); + rfcomm->setMac( mac ); + rfcomm->setChannel( newDev->channel() ); + rfcomm->setComment( newDev->comment() ); + qDebug( "New device set up" ); + } + } + } +} + +void RfcommAssignDialog::loadConfig() { + + //Config cfg( "bluetoothmanager-rfcommbind" ); + + for ( int i = 0 ; i < m_range; i++ ) { + // cfg.setGroup( QString("%1").arg( i ) ); + RfcommDialogItem *rfcomm = new RfcommDialogItem( m_box ); + m_itemList.insert( i , rfcomm ); + rfcomm->setIdent( i ); + QMap<QString, RfCommConfObject*>::Iterator it; + it = confHandler->foundEntries().find( QString("%1").arg( i ) ); + if ( it != confHandler->foundEntries().end() ) { + qDebug( "Found key in foundEntries() " ); + rfcomm->setMac( it.data()->mac() ); + rfcomm->setChannel( it.data()->channel() ); + rfcomm->setComment( it.data()->comment() ); + } + /* Use rfcomm.conf directly for now + * rfcomm->setMac( cfg.readEntry( "mac", "" ) ); + * rfcomm->setChannel( cfg.readNumEntry( "channel", 1 ) ); + * rfcomm->setComment( cfg.readEntry( "comment", "" ) ); + */ + } +} + + +void RfcommAssignDialog::saveConfig() { + + //Config cfg( "bluetoothmanager-rfcommbind" ); + + QMap< int, RfcommDialogItem*>::Iterator it; + + QMap< QString, RfCommConfObject*> outMap; + + for( it = m_itemList.begin(); it != m_itemList.end(); ++it ) { + + //cfg.setGroup( QString("%1").arg( it.key() ) ); + RfcommDialogItem *rfcomm = it.data(); + + + outMap.insert( QString( "%1").arg( it.key() ), new RfCommConfObject( it.key(), rfcomm->mac(), rfcomm->channel(), rfcomm->comment() ) ); + + + //cfg.writeEntry( "mac", rfcomm->mac() ); + //cfg.writeEntry( "channel", rfcomm->channel() ); + //cfg.writeEntry( "comment", rfcomm->comment() ); + } + + confHandler->save( outMap ); + +} diff --git a/noncore/net/opietooth/manager/rfcommassigndialogimpl.h b/noncore/net/opietooth/manager/rfcommassigndialogimpl.h new file mode 100644 index 0000000..9983632 --- a/dev/null +++ b/noncore/net/opietooth/manager/rfcommassigndialogimpl.h @@ -0,0 +1,39 @@ +#ifndef RFCOMMASSIGN +#define RFCOMMASSIGN + +#include "rfcommassigndialogbase.h" +#include "rfcommassigndialogitem.h" +#include "rfcommconfhandler.h" + +#include <qscrollview.h> +#include <qmap.h> +#include <qvbox.h> + +namespace OpieTooth { + + class RfcommAssignDialog: public RfcommAssignDialogBase { + + Q_OBJECT + + public: + + RfcommAssignDialog( QWidget* parent = 0, const char* name = 0,bool modal = 0, WFlags fl = 0 ); + ~RfcommAssignDialog(); + + void loadConfig(); + void saveConfig(); + + void newDevice( const QString & mac ); + + private: + QScrollView *m_scrollView; + // how many rfcomm devices are possible + int m_range; + QMap< int, RfcommDialogItem* > m_itemList; + QVBox *m_box; + RfCommConfHandler *confHandler; +}; + +} + +#endif diff --git a/noncore/net/opietooth/manager/rfcommassigndialogitem.cpp b/noncore/net/opietooth/manager/rfcommassigndialogitem.cpp new file mode 100644 index 0000000..1e7130f --- a/dev/null +++ b/noncore/net/opietooth/manager/rfcommassigndialogitem.cpp @@ -0,0 +1,54 @@ + +#include "rfcommassigndialogitem.h" + +#include <qlineedit.h> +#include <qcombobox.h> +#include <qlabel.h> +#include <qgroupbox.h> + +using namespace OpieTooth; + + +RfcommDialogItem::RfcommDialogItem( QWidget* parent, const char* name, WFlags fl ) + : RfcommDialogItemBase( parent, name, fl ) { + +} + +RfcommDialogItem::~RfcommDialogItem() { +} + + +int RfcommDialogItem::ident() { + return m_ident; +} + +QString RfcommDialogItem::mac() { + return m_macAddress->text(); +} + +int RfcommDialogItem::channel() { + return m_channelDropdown->currentItem(); +} + +QString RfcommDialogItem::comment() { + return m_commentLine->text(); +} + +void RfcommDialogItem::setIdent( int ident ) { + m_ident = ident; + m_identLabel->setTitle( QString( "rfcomm%1").arg( ident ) ); +} + +void RfcommDialogItem::setMac( const QString &mac ) { + m_macAddress->setText( mac ); +} + +void RfcommDialogItem::setChannel( int channel ) { + m_channelDropdown->setCurrentItem( channel ); +} + +void RfcommDialogItem::setComment( const QString &comment ) { + m_commentLine->setText( comment ); +} + + diff --git a/noncore/net/opietooth/manager/rfcommassigndialogitem.h b/noncore/net/opietooth/manager/rfcommassigndialogitem.h new file mode 100644 index 0000000..34a794f --- a/dev/null +++ b/noncore/net/opietooth/manager/rfcommassigndialogitem.h @@ -0,0 +1,40 @@ +#ifndef RFCOMMDIALOGITEM +#define RFCOMMDIALOGITEM + +#include "rfcommdialogitembase.h" + +#include <qwidget.h> + +namespace OpieTooth { + + class RfcommDialogItem : public RfcommDialogItemBase { + + Q_OBJECT + + public: + RfcommDialogItem( QWidget* parent = 0, const char* name = 0, WFlags fl = 0 ); + ~RfcommDialogItem(); + + // number if the rfcomm device + int ident(); + // devices mac address + QString mac(); + int channel(); + QString comment(); + + void setIdent( int ident ); + void setMac( const QString& mac ); + void setChannel( int channel ); + void setComment( const QString& comment ); + + private: + + + int m_ident; + +}; + + +} + +#endif diff --git a/noncore/net/opietooth/manager/rfcommconfhandler.cpp b/noncore/net/opietooth/manager/rfcommconfhandler.cpp new file mode 100644 index 0000000..20453e8 --- a/dev/null +++ b/noncore/net/opietooth/manager/rfcommconfhandler.cpp @@ -0,0 +1,114 @@ + +#include <qtextstream.h> + +#include "rfcommconfhandler.h" + + +using namespace OpieTooth; + +// move to lib + + +RfCommConfObject::RfCommConfObject( int number, QString mac, int channel, QString comment ) { + m_number = number; + m_mac = mac; + m_channel = channel; + m_comment = comment; + // m_foundEntries = 0; +} + +void RfCommConfObject::setNumber( int number ) { + m_number = number; +} + +void RfCommConfObject::setMac( QString mac ) { + m_mac = mac; +} + +void RfCommConfObject::setChannel( int channel ) { + m_channel = channel; +} + +void RfCommConfObject::setComment( QString comment ) { + m_comment = comment; +} + + +RfCommConfObject::~RfCommConfObject() { +} + + +RfCommConfHandler::RfCommConfHandler( const QString & filename ) { + + m_filename = filename; + load(); +} + +RfCommConfHandler::~RfCommConfHandler() { + +} + +void RfCommConfHandler::save( QMap<QString, RfCommConfObject*> devices ) { + + QFile rfCommConf( "/tmp/test" ); + QTextStream outStream( &rfCommConf ); + if ( rfCommConf.open( IO_WriteOnly ) ) { + + QMap<QString, RfCommConfObject*>::Iterator it; + for( it = devices.begin(); it != devices.end(); ++it ) { + outStream << "rfcomm" + QString("%1").arg( it.data()->number() ) + " {\n"; + outStream << " device " + it.data()->mac() + ";\n"; + outStream << " channel " + QString( "%1" ).arg( it.data()->channel() ) + ";\n"; + outStream << " comment \"" + it.data()->comment() + "\";\n"; + outStream << "}\n\n"; + } + + rfCommConf.close(); + } +} + + +QMap<QString, RfCommConfObject*> RfCommConfHandler::foundEntries() { + return m_foundEntries; +} + +void RfCommConfHandler::load() { + + QFile rfCommConf( m_filename ); + if ( rfCommConf.open( IO_ReadOnly ) ) { + + QStringList list; + QTextStream inStream( &rfCommConf ); + list = QStringList::split( "\n", inStream.read() ); + + QString number; + QString mac; + QString channel; + QString comment; + + for ( QStringList::Iterator line=list.begin(); line != list.end(); line++ ) { + + QString tmpLine = ( *line ).stripWhiteSpace(); + + if ( tmpLine.startsWith("rfcomm") ) { + QString number = tmpLine.mid( 6,1 ); + qDebug( tmpLine ); + qDebug( "TEST " + number ); + } else if ( tmpLine.startsWith( "}" ) ) { + m_foundEntries.insert( number, new RfCommConfObject( number.toInt(), mac, channel.toInt(), comment ) ); + } else if ( tmpLine.startsWith( "device" ) ) { + mac = tmpLine.mid( 7, 17 ); + qDebug( "mac" + mac ); + } else if ( tmpLine.startsWith( "channel" ) ) { + channel = tmpLine.mid( 8, 1 ); + qDebug ( "Channel :" + channel ); + } else if ( tmpLine.startsWith( "comment" ) ) { + comment = tmpLine.mid( 9, tmpLine.find( ';' ) - 9 - 1 ); + qDebug( "Comment: " + comment ); + } + } + rfCommConf.close(); + } + save( m_foundEntries ); + qDebug( QString( "ENTries: %1").arg( m_foundEntries.count() ) ); +} diff --git a/noncore/net/opietooth/manager/rfcommconfhandler.h b/noncore/net/opietooth/manager/rfcommconfhandler.h new file mode 100644 index 0000000..e13c833 --- a/dev/null +++ b/noncore/net/opietooth/manager/rfcommconfhandler.h @@ -0,0 +1,54 @@ +#ifndef RFCOMMCONFHANDLER +#define RFCOMMCONFHANDLER + +#include <qstring.h> +#include <qfile.h> +#include <qobject.h> +#include <qmap.h> + +namespace OpieTooth { + + class RfCommConfObject { + + public: + RfCommConfObject( int number, QString mac, int channel, QString comment ); + ~RfCommConfObject(); + + void setNumber( int number ); + int number() { return m_number; }; + void setMac( QString mac ); + QString mac() { return m_mac; }; + void setChannel( int channel ); + int channel() { return m_channel; }; + void setComment( QString comment ); + QString comment() { return m_comment; }; + + + private: + int m_number; + QString m_mac; + int m_channel; + QString m_comment; + + }; + + class RfCommConfHandler { + + public: + RfCommConfHandler( const QString & filename ); + ~RfCommConfHandler(); + + void save( QMap<QString, RfCommConfObject*> devices ); + + QMap<QString, RfCommConfObject*> foundEntries(); + + private: + void load(); + + QString m_filename; + QMap<QString, RfCommConfObject*> m_foundEntries; + }; + +} + +#endif diff --git a/noncore/net/opietooth/manager/rfcommdialogitembase.ui b/noncore/net/opietooth/manager/rfcommdialogitembase.ui new file mode 100644 index 0000000..dafca52 --- a/dev/null +++ b/noncore/net/opietooth/manager/rfcommdialogitembase.ui @@ -0,0 +1,216 @@ +<!DOCTYPE UI><UI> +<class>RfcommDialogItemBase</class> +<widget> + <class>QWidget</class> + <property stdset="1"> + <name>name</name> + <cstring>RfcommDialogItemBase</cstring> + </property> + <property stdset="1"> + <name>geometry</name> + <rect> + <x>0</x> + <y>0</y> + <width>345</width> + <height>95</height> + </rect> + </property> + <property stdset="1"> + <name>caption</name> + <string>Form2</string> + </property> + <property> + <name>layoutMargin</name> + </property> + <property> + <name>layoutSpacing</name> + </property> + <vbox> + <property stdset="1"> + <name>margin</name> + <number>0</number> + </property> + <property stdset="1"> + <name>spacing</name> + <number>0</number> + </property> + <widget> + <class>QGroupBox</class> + <property stdset="1"> + <name>name</name> + <cstring>m_identLabel</cstring> + </property> + <property> + <name>layoutMargin</name> + </property> + <property> + <name>layoutSpacing</name> + </property> + <grid> + <property stdset="1"> + <name>margin</name> + <number>5</number> + </property> + <property stdset="1"> + <name>spacing</name> + <number>5</number> + </property> + <widget row="0" column="0" > + <class>QLayoutWidget</class> + <property stdset="1"> + <name>name</name> + <cstring>Layout3</cstring> + </property> + <hbox> + <property stdset="1"> + <name>margin</name> + <number>0</number> + </property> + <property stdset="1"> + <name>spacing</name> + <number>6</number> + </property> + <widget> + <class>QLabel</class> + <property stdset="1"> + <name>name</name> + <cstring>TextLabel4</cstring> + </property> + <property stdset="1"> + <name>text</name> + <string>Mac</string> + </property> + </widget> + <widget> + <class>QLineEdit</class> + <property stdset="1"> + <name>name</name> + <cstring>m_macAddress</cstring> + </property> + </widget> + <widget> + <class>QLabel</class> + <property stdset="1"> + <name>name</name> + <cstring>TextLabel5</cstring> + </property> + <property stdset="1"> + <name>text</name> + <string>Channel</string> + </property> + </widget> + <widget> + <class>QComboBox</class> + <item> + <property> + <name>text</name> + <string>0</string> + </property> + </item> + <item> + <property> + <name>text</name> + <string>1</string> + </property> + </item> + <item> + <property> + <name>text</name> + <string>2</string> + </property> + </item> + <item> + <property> + <name>text</name> + <string>3</string> + </property> + </item> + <item> + <property> + <name>text</name> + <string>4</string> + </property> + </item> + <item> + <property> + <name>text</name> + <string>5</string> + </property> + </item> + <item> + <property> + <name>text</name> + <string>6</string> + </property> + </item> + <item> + <property> + <name>text</name> + <string>7</string> + </property> + </item> + <item> + <property> + <name>text</name> + <string>8</string> + </property> + </item> + <item> + <property> + <name>text</name> + <string>9</string> + </property> + </item> + <item> + <property> + <name>text</name> + <string>10</string> + </property> + </item> + <property stdset="1"> + <name>name</name> + <cstring>m_channelDropdown</cstring> + </property> + </widget> + </hbox> + </widget> + <widget row="1" column="0" > + <class>QLayoutWidget</class> + <property stdset="1"> + <name>name</name> + <cstring>Layout4</cstring> + </property> + <hbox> + <property stdset="1"> + <name>margin</name> + <number>0</number> + </property> + <property stdset="1"> + <name>spacing</name> + <number>6</number> + </property> + <widget> + <class>QLabel</class> + <property stdset="1"> + <name>name</name> + <cstring>TextLabel3</cstring> + </property> + <property stdset="1"> + <name>text</name> + <string>Comment:</string> + </property> + </widget> + <widget> + <class>QLineEdit</class> + <property stdset="1"> + <name>name</name> + <cstring>m_commentLine</cstring> + </property> + </widget> + </hbox> + </widget> + </grid> + </widget> + </vbox> +</widget> +</UI> diff --git a/noncore/net/opietooth/manager/rfcpopup.cpp b/noncore/net/opietooth/manager/rfcpopup.cpp index cc87b6c..d95f14b 100644 --- a/noncore/net/opietooth/manager/rfcpopup.cpp +++ b/noncore/net/opietooth/manager/rfcpopup.cpp @@ -3,18 +3,22 @@ #include "pppdialog.h" #include "rfcpopup.h" +#include "rfcommassigndialogimpl.h" using namespace OpieTooth; /* * c'tor init the QAction */ -RfcCommPopup::RfcCommPopup() +RfcCommPopup::RfcCommPopup( OpieTooth::BTDeviceItem* item ) : QPopupMenu() { qWarning("RfcCommPopup c'tor"); QAction* a; + + m_item = item; + /* connect action */ a = new QAction( ); // so it's get deleted a->setText("Connect"); @@ -33,10 +37,10 @@ RfcCommPopup::RfcCommPopup() /* foo action */ a = new QAction( ); - a->setText("Foo"); + a->setText("Bind table"); a->addTo( this ); connect( a, SIGNAL( activated() ), - this, SLOT( slotFoo() ) ); + this, SLOT( slotBind() ) ); /* bar action */ @@ -74,8 +78,15 @@ void RfcCommPopup::slotDisconnect() { } -void RfcCommPopup::slotFoo() { - qWarning("slotFoo"); +void RfcCommPopup::slotBind() { + RfcommAssignDialog rfcommAssign ( this, "RfcommAssignDialog", true, WStyle_ContextHelp ); + + rfcommAssign.showMaximized(); + rfcommAssign.newDevice( m_item->mac() ); + + if ( rfcommAssign.exec() == QDialog::Accepted ) { + rfcommAssign.saveConfig(); + } } diff --git a/noncore/net/opietooth/manager/rfcpopup.h b/noncore/net/opietooth/manager/rfcpopup.h index c388f65..74b9117 100644 --- a/noncore/net/opietooth/manager/rfcpopup.h +++ b/noncore/net/opietooth/manager/rfcpopup.h @@ -4,6 +4,8 @@ #include <qpopupmenu.h> #include <qaction.h> +#include "btdeviceitem.h" + namespace OpieTooth { /** * A simple reference implementation for @@ -16,19 +18,20 @@ namespace OpieTooth { class RfcCommPopup : public QPopupMenu { Q_OBJECT public: - RfcCommPopup(); + RfcCommPopup( OpieTooth::BTDeviceItem* ); ~RfcCommPopup(); private: QAction* m_con; QAction* m_dis; - QAction* m_foo; + QAction* m_bind; QAction* m_bar; + OpieTooth::BTDeviceItem *m_item; private slots: void slotConnect(); void slotDisconnect(); - void slotFoo(); + void slotBind(); void slotBar(); }; }; diff --git a/noncore/net/opietooth/manager/stdpopups.cpp b/noncore/net/opietooth/manager/stdpopups.cpp index 38b8ee7..e1f8396 100644 --- a/noncore/net/opietooth/manager/stdpopups.cpp +++ b/noncore/net/opietooth/manager/stdpopups.cpp @@ -9,7 +9,7 @@ extern "C" { QPopupMenu* newRfcComPopup( const OpieTooth::Services& service, OpieTooth::BTDeviceItem* item ) { - return new OpieTooth::RfcCommPopup(/* servive, item*/ ); // fix spellin RfComm vs. RfcComm and paramaters + return new OpieTooth::RfcCommPopup(/* servive,*/ item ); // fix spellin RfComm vs. RfcComm and paramaters //return 0l; } QPopupMenu* newObexPushPopup( const OpieTooth::Services&, OpieTooth::BTDeviceItem* ) { diff --git a/noncore/net/ubrowser/main.cpp b/noncore/net/ubrowser/main.cpp index e4a873d..0488cfd 100644 --- a/noncore/net/ubrowser/main.cpp +++ b/noncore/net/ubrowser/main.cpp @@ -18,12 +18,7 @@ Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA #include "mainview.h" -int main( int argc, char **argv ) -{ - QPEApplication a( argc, argv ); - MainView w; - -// a.setMainWidget( &w ); - a.showMainDocumentWidget( &w ); - return a.exec(); -} +#include <opie/oapplicationfactory.h> + +OPIE_EXPORT_APP( OApplicationFactory<MainView> ) + diff --git a/noncore/net/ubrowser/mainview.cpp b/noncore/net/ubrowser/mainview.cpp index 9302f05..0d3f171 100644 --- a/noncore/net/ubrowser/mainview.cpp +++ b/noncore/net/ubrowser/mainview.cpp @@ -17,7 +17,7 @@ Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA #include "mainview.h" -MainView::MainView(QWidget *parent, const char *name) : QMainWindow(parent, name) +MainView::MainView(QWidget *parent, const char *name, WFlags fl) : QMainWindow(parent, name, fl) { setIcon( Resource::loadPixmap( "remote" ) ); setCaption(tr("uBrowser")); diff --git a/noncore/net/ubrowser/mainview.h b/noncore/net/ubrowser/mainview.h index 20e2c70..cc63729 100644 --- a/noncore/net/ubrowser/mainview.h +++ b/noncore/net/ubrowser/mainview.h @@ -36,7 +36,8 @@ class MainView : public QMainWindow { Q_OBJECT public: - MainView(QWidget *parent=0, const char *name=0); + static QString appName() { return QString::fromLatin1("ubrowser"); } + MainView(QWidget *parent=0, const char *name=0, WFlags fl = 0); public slots: void goClicked(); void textChanged(); diff --git a/noncore/net/ubrowser/ubrowser.pro b/noncore/net/ubrowser/ubrowser.pro index a6943dd..ed00047 100644 --- a/noncore/net/ubrowser/ubrowser.pro +++ b/noncore/net/ubrowser/ubrowser.pro @@ -1,6 +1,4 @@ -TEMPLATE =app -CONFIG +=qt warn_on release -DESTDIR =../../../bin +CONFIG +=qt warn_on release quick-app HEADERS = mainview.h httpfactory.h SOURCES = main.cpp mainview.cpp httpfactory.cpp INCLUDEPATH +=../../../include diff --git a/noncore/unsupported/mailit/emailclient.cpp b/noncore/unsupported/mailit/emailclient.cpp index 90664bb..8359acf 100644 --- a/noncore/unsupported/mailit/emailclient.cpp +++ b/noncore/unsupported/mailit/emailclient.cpp @@ -281,7 +281,7 @@ void EmailClient::sendQuedMail() int count = 0; if (accountList.count() == 0) { - QMessageBox::warning(qApp->activeWindow(), "No account selected", "You must create an account", "OK\n"); + QMessageBox::warning(qApp->activeWindow(), tr("No account selected"), tr("You must create an account"), "OK\n"); return; } //traverse listview, find messages to send @@ -321,8 +321,8 @@ void EmailClient::mailSent() void EmailClient::getNewMail() { if (accountList.count() == 0) { - QMessageBox::warning(qApp->activeWindow(),"No account selected", - "You must create an account", "OK\n"); + QMessageBox::warning(qApp->activeWindow(),tr("No account selected"), + tr("You must create an account"), "OK\n"); return; } @@ -785,7 +785,7 @@ void EmailClient::selectAccount(int id) emit newCaption("Mailit - " + currentAccount->accountName); getNewMail(); } else { - emit newCaption("Mailit ! No account defined"); + emit newCaption( tr("Mailit ! No account defined") ); } } @@ -825,7 +825,7 @@ void EmailClient::deleteAccount(int id) QString message; newAccount = accountList.at(id); - message = "Delete account:\n" + newAccount->accountName; + message = tr("Delete account:\n") + newAccount->accountName; switch( QMessageBox::warning( this, "Mailit", message, "Yes", "No", 0, 0, 1 ) ) { @@ -846,7 +846,7 @@ void EmailClient::updateAccounts() selectAccountMenu->clear(); deleteAccountMenu->clear(); - newAccountId = editAccountMenu->insertItem("New", this, + newAccountId = editAccountMenu->insertItem( tr("New"), this, SLOT(editAccount(int)) ); editAccountMenu->insertSeparator(); diff --git a/noncore/unsupported/mailit/emaillistitem.cpp b/noncore/unsupported/mailit/emaillistitem.cpp index fc9f766..a25f93a 100644 --- a/noncore/unsupported/mailit/emaillistitem.cpp +++ b/noncore/unsupported/mailit/emaillistitem.cpp @@ -38,7 +38,8 @@ EmailListItem::EmailListItem(QListView *parent, Email mailIn, bool inbox) setText(0, temp); } setText(1, mail.subject); - setText(2,mail.date); + // setText(2,mail.date); + setText(2,dateFromULCString(mail.date)); if (mailIn.files.count()>0) { @@ -97,3 +98,61 @@ void EmailListItem::paintCell( QPainter *p, const QColorGroup &cg, _cg.setColor( QColorGroup::Text, c ); } + +/* + * Converts an E-Mail date (ULC) RFC 2822 conform to a QDateTime. + * Returning a QString with formatting of "YYYY-MM-DD HH:MM:SS" + * (zodiac: This method was tested with more than 300 inbox mails, + * it didn't slow down the loading of mail-it.) + */ +QString EmailListItem::dateFromULCString( QString ulcDate ) +{ + QString sTemp, sTime; + int iPos, iDay, iMon=1, iYear; + + iPos=ulcDate.find(','); + if (iPos) { // it has a day-of-week + ulcDate=ulcDate.remove(0,++iPos); //.stripWhiteSpace(); + } + + QStringList dateEntries = QStringList::split(" ",ulcDate,FALSE); + QStringList::Iterator iter = dateEntries.begin(); + + // Get day as DD + iDay = (*iter++).toInt(); + + // Get month as string Mmm + sTemp = (*iter++); + if (sTemp =="Jan") {iMon=1;} else + if (sTemp =="Feb") {iMon=2;} else + if (sTemp =="Mar") {iMon=3;} else + if (sTemp =="Apr") {iMon=4;} else + if (sTemp =="May") {iMon=5;} else + if (sTemp =="Jun") {iMon=6;} else + if (sTemp =="Jul") {iMon=7;} else + if (sTemp =="Aug") {iMon=8;} else + if (sTemp =="Sep") {iMon=9;} else + if (sTemp =="Oct") {iMon=10;} else + if (sTemp =="Nov") {iMon=11;} else + if (sTemp =="Dec") {iMon=12;} + + // Get year as YYYY or YY + iYear = (*iter++).toInt(); + + QDate date = QDate(iYear, iMon, iDay); + + // Convert timestring into a QTime + QStringList timeEntries = QStringList::split(":",(*iter++),FALSE); + QStringList::Iterator iterTime = timeEntries.begin(); + iYear=(*iterTime++).toInt(); // var reuse.. *cough* + iMon=(*iterTime++).toInt(); + iDay=(*iterTime++).toInt(); + QTime time = QTime(iYear,iMon,iDay); + + return QString::number(date.year())+"-" + +QString::number(date.month()).rightJustify(2,'0')+"-" + +QString::number(date.day()).rightJustify(2,'0')+" " + +time.toString(); +} + + diff --git a/noncore/unsupported/mailit/emaillistitem.h b/noncore/unsupported/mailit/emaillistitem.h index 642932c..129a774 100644 --- a/noncore/unsupported/mailit/emaillistitem.h +++ b/noncore/unsupported/mailit/emaillistitem.h @@ -39,6 +39,7 @@ protected: private: Email mail; bool selected; + QString dateFromULCString( QString ulc ); }; #endif diff --git a/noncore/unsupported/mailit/mailit.pro b/noncore/unsupported/mailit/mailit.pro index 5e9a83a..0224886 100644 --- a/noncore/unsupported/mailit/mailit.pro +++ b/noncore/unsupported/mailit/mailit.pro @@ -1,6 +1,5 @@ -TEMPLATE = app TARGET = mailit -CONFIG = qt warn_on release +CONFIG = qt warn_on release quick-app HEADERS = emailclient.h \ emailhandler.h \ emaillistitem.h \ @@ -37,9 +36,6 @@ INCLUDEPATH += $(OPIEDIR)/include DEPENDPATH += $(OPIEDIR)/include LIBS += -lqpe -lopie # -lssl -MOC_DIR=qpeobj -OBJECTS_DIR=qpeobj -DESTDIR=$(OPIEDIR)/bin TRANSLATIONS = ../../../i18n/de/mailit.ts \ ../../../i18n/nl/mailit.ts \ diff --git a/noncore/unsupported/mailit/mailitwindow.h b/noncore/unsupported/mailit/mailitwindow.h index e818d32..11e56b9 100644 --- a/noncore/unsupported/mailit/mailitwindow.h +++ b/noncore/unsupported/mailit/mailitwindow.h @@ -33,6 +33,7 @@ class MailItWindow: public QMainWindow { Q_OBJECT public: + static QString appName() { return QString::fromLatin1("mailit"); } MailItWindow(QWidget *parent = 0, const char *name = 0, WFlags fl = 0); ~MailItWindow(); diff --git a/noncore/unsupported/mailit/main.cpp b/noncore/unsupported/mailit/main.cpp index 3a3e1fc..71f8877 100644 --- a/noncore/unsupported/mailit/main.cpp +++ b/noncore/unsupported/mailit/main.cpp @@ -20,10 +20,6 @@ #include <qpe/qpeapplication.h> #include "mailitwindow.h" -int main(int argc, char* argv[]) -{ - QPEApplication a( argc, argv ); - MailItWindow mw(0, 0); - a.showMainDocumentWidget(&mw); - return a.exec(); -} +#include <opie/oapplicationfactory.h> + +OPIE_EXPORT_APP( OApplicationFactory<MailItWindow> )
\ No newline at end of file |