From ebcc6c9c8bc08d1751d0778a4396349e0fc0c817 Mon Sep 17 00:00:00 2001 From: zecke Date: Wed, 22 Sep 2004 00:50:08 +0000 Subject: As I couldn't reach Oliver Fels I'm updating Opie Security strings on request of CoreDump (Matthias Hentges) --- diff --git a/i18n/cz/security.ts b/i18n/cz/security.ts index 039004f..caebb09 100644 --- a/i18n/cz/security.ts +++ b/i18n/cz/security.ts @@ -1,74 +1,237 @@ + LoginBase + + LoginBase + + + + Login + Přihlášení + + + Login Automatically + Automaticky přihlásit + + + If you select this option, opie-login will automagically log you in with the user you have selected in the drop-down list. + +For the Zaurus 5x00 this is always the user "root". + Při aktivaci této volby vás opie-login automaticky přihlásí jako uživatele, kterého jste si vybrali v seznamu. + +Pro Zauruse 5x00 je to vždy uživatel "root". + + + This drop-down list allows you to select the user for auto-login +(if enabled above). + +You can only select an actually configured user. + Tento seznam vám umožní vybrat uživatele pro automatické přihlášení. +(Pokud je volba zapnutá). + +Můžete vybrat pouze nakonfigurované uživatele. + + + + MultiauthConfig + + Security configuration + + + + Load which plugins in what order: + + + + Check a checkbox to activate/deactivate a plugin or use the arrow buttons on the right to change the order they will appear in + + + + Move Up + + + + Move Down + + + + plugins + + + + Authentication + + + + Login + Přihlášení + + + Sync + Synchronizace + + + Attention + Upozornění + + + <p>All user-defined net ranges will be lost. + <p>Všechny uživatelovy síťové rozsahy budou ztraceny. + + + Cancel + Storno + + + Ok + Ok + + + 192.168.129.0/24 + 192.168.129.0/24 + + + 192.168.1.0/24 + 192.168.1.0/24 + + + 192.168.0.0/16 + 192.168.0.0/16 + + + 172.16.0.0/12 + 172.16.0.0/12 + + + 10.0.0.0/8 + 10.0.0.0/8 + + + 1.0.0.0/8 + 1.0.0.0/8 + + + Any + Jakákoliv + + + None + Žádná + + + + MultiauthGeneralConfig + + When to lock Opie + + + + on Opie start + + + + on Opie resume + + + + Multiple plugins authentication + + + + Required successes + + + + Debug options + + + + Don't protect this config screen + + + + Show explanatory screens + + + + Allow to bypass authentication + + + + Note: the third option implies the second one + + + + Security Attention - Upozornění + Upozornění <p>All user-defined net ranges will be lost. - <p>Všechny uživatelovy síťové rozsahy budou ztraceny. + <p>Všechny uživatelovy síťové rozsahy budou ztraceny. Cancel - Storno + Storno Ok - Ok + Ok 192.168.129.0/24 - 192.168.129.0/24 + 192.168.129.0/24 192.168.1.0/24 - 192.168.1.0/24 + 192.168.1.0/24 192.168.0.0/16 - 192.168.0.0/16 + 192.168.0.0/16 172.16.0.0/12 - 172.16.0.0/12 + 172.16.0.0/12 10.0.0.0/8 - 10.0.0.0/8 + 10.0.0.0/8 1.0.0.0/8 - 1.0.0.0/8 + 1.0.0.0/8 Any - Jakákoliv + Jakákoliv None - Žádná + Žádná Set passcode - Nastavit heslo + Nastavit heslo Change passcode - Změnit heslo + Změnit heslo Enter passcode - Vložit heslo + Vložit heslo Passcode incorrect - Neplatné heslo + Neplatné heslo The passcode entered is incorrect. Access denied - Vložené heslo je chybné. + Vložené heslo je chybné. Přístup odmítnut @@ -81,70 +244,70 @@ Přístup odmítnut Enter new passcode - Zadejte nové heslo + Zadejte nové heslo Re-enter new passcode - Znovu zadejte nové heslo + Znovu zadejte nové heslo SecurityBase Security Settings - Bezpečnostní nastavení + Bezpečnostní nastavení Passcode - Heslo + Heslo Change passcode - Změnit heslo + Změnit heslo This button will let you change the security passcode. Note: This is *not* the sync password. - Toto tlačítko umožní změnit bezpečnostní heslo. + Toto tlačítko umožní změnit bezpečnostní heslo. Poznámka: Toto *není* synchronizační heslo. Clear passcode - Vyčistit heslo + Vyčistit heslo Delete the current passcode. You can enter a new one at any time. - Smaže aktuální heslo. + Smaže aktuální heslo. Můžete kdykoliv zadat heslo nové. Require pass code at power-on - Při zapnutí vyžadovat heslo + Při zapnutí vyžadovat heslo If you enable this option, a passcode must be entered after every resume event of your Zaurus. - Při aktivaci této volby budete muset zadat heslo při každém zapnutí Zauruse. + Při aktivaci této volby budete muset zadat heslo při každém zapnutí Zauruse. <P>Pass code protection provides a minimal level of protection from casual access to this device. - <P>Ochrana heslem poskytuje minimální ochranu před náhodným přístupem k zařízení. + <P>Ochrana heslem poskytuje minimální ochranu před náhodným přístupem k zařízení. Login - Přihlášení + Přihlášení Login Automatically - Automaticky přihlásit + Automaticky přihlásit If you select this option, opie-login will automagically log you in with the user you have selected in the drop-down list. For the Zaurus 5x00 this is always the user "root". - Při aktivaci této volby vás opie-login automaticky přihlásí jako uživatele, kterého jste si vybrali v seznamu. + Při aktivaci této volby vás opie-login automaticky přihlásí jako uživatele, kterého jste si vybrali v seznamu. Pro Zauruse 5x00 je to vždy uživatel "root". @@ -153,18 +316,18 @@ Pro Zauruse 5x00 je to vždy uživatel "root". (if enabled above). You can only select an actually configured user. - Tento seznam vám umožní vybrat uživatele pro automatické přihlášení. + Tento seznam vám umožní vybrat uživatele pro automatické přihlášení. (Pokud je volba zapnutá). Můžete vybrat pouze nakonfigurované uživatele. Sync - Synchronizace + Synchronizace Accept sync from network: - Akceptovat synchronizaci ze sítě: + Akceptovat synchronizaci ze sítě: Select a net-range or enter a new one. @@ -177,7 +340,7 @@ The entry "All" will allow *any* IP to connect. The entry "None" will *deny* any connection. If unsure, select "Any". - Vyberte rozsah sítě, nebo zadejte nový. + Vyberte rozsah sítě, nebo zadejte nový. Tento seznam vám umožní vybrat rozsah sítě, která je oprávněná připojovat se do Zauruse. @@ -190,7 +353,7 @@ Pokud nevíte, vyberte "Jakákoliv". Delete Entry - Smazat položku + Smazat položku Delete the selected net range from the list @@ -199,7 +362,7 @@ If you press this button, the currently selected net range will be deleted from If you hit this button in error, the button "Restore Defaults" will restore the list to the state it has been when you initially booted your Zaurus. - Vymaže vybraný síťový rozsah ze seznamu + Vymaže vybraný síťový rozsah ze seznamu Po stisknutí tohoto tlačítka bude vybraný síťový rozsah vymazán ze seznamu. @@ -208,21 +371,21 @@ seznam sítí do stavu jako po prvním nastartování Zauruse. Restore Defaults - Obnovit výchozí + Obnovit výchozí This button will restore the list of net ranges to the defaults. Beware that all manually entered net ranges will be lost! - Toto tlačítko vrátí seznam sítí do původního + Toto tlačítko vrátí seznam sítí do původního stavu. Uvědomte si ale, že všechny zadané rozsahy budou ztraceny! Select your sync software - Vyberte váš synchronizační program + Vyberte váš synchronizační program QTopia @@ -230,7 +393,7 @@ Uvědomte si ale, že všechny zadané rozsahy budou ztraceny! IntelliSync - IntelliSync + IntelliSync This option changes the login behaviour of the internal FTP server. @@ -246,16 +409,101 @@ Výchozí je Qtopia. To vám umožní přihlášení se jménem "root" Qtopia 1.7 - Qtopia 1.7 + Qtopia 1.7 Opie 1.0 - Opie 1.0 + Opie 1.0 Both Obojí + + + SyncBase + + SyncBase + + + + Sync + Synchronizace + + + Accept sync from network: + Akceptovat synchronizaci ze sítě: + + + Select a net-range or enter a new one. + +This drop-down list lets you select a net range which is allowed to connect to your Zaurus. + +For example, a net range of 192.168.1.0/24 will allow any machine with an IP between 192.168.1.1 and 192.168.1.254 to connect to (and sync with) your Zaurus. + +The entry "All" will allow *any* IP to connect. +The entry "None" will *deny* any connection. + +If unsure, select "Any". + Vyberte rozsah sítě, nebo zadejte nový. + +Tento seznam vám umožní vybrat rozsah sítě, která je oprávněná připojovat se do Zauruse. + +Například síťový rozsah 192.168.1.0/24 povolí připojení a synchronizaci jakéhokoliv počítače mezi IP adresami 192.168.1.1 a 192.168.1.254. + +Položka "Jakákoliv" umožní připojení *jakékoliv* IP adrese. +Položka "Žádná" zakáže *všechna* připojení. + +Pokud nevíte, vyberte "Jakákoliv". + + + Delete Entry + Smazat položku + + + Delete the selected net range from the list + +If you press this button, the currently selected net range will be deleted from the list of net ranges. + +If you hit this button in error, the button "Restore Defaults" will restore +the list to the state it has been when you initially booted your Zaurus. + Vymaže vybraný síťový rozsah ze seznamu + +Po stisknutí tohoto tlačítka bude vybraný síťový rozsah vymazán ze seznamu. + +Jestliže stisknete tlačítko omylem, požitím tlačítka "Obnovit výchozí" dostanete +seznam sítí do stavu jako po prvním nastartování Zauruse. + + + Restore Defaults + Obnovit výchozí + + + This button will restore the list of net ranges +to the defaults. + +Beware that all manually entered net ranges will be lost! + Toto tlačítko vrátí seznam sítí do původního +stavu. + +Uvědomte si ale, že všechny zadané rozsahy budou ztraceny! + + + Select your sync software + Vyberte váš synchronizační program + + + Qtopia 1.7 + Qtopia 1.7 + + + Opie 1.0 + Opie 1.0 + + + IntelliSync + IntelliSync + Alter the Sync Protocol to tweak for the different devices. IntelliSync will disable the password check but you'll be prompted to accept the connection. diff --git a/i18n/da/security.ts b/i18n/da/security.ts index a6cc677..ddbf92d 100644 --- a/i18n/da/security.ts +++ b/i18n/da/security.ts @@ -1,43 +1,69 @@ - Security + LoginBase - Set passcode - Vælg kode + LoginBase + - Change passcode - Skift kode + Login + - Enter passcode - Indtast kode + Login Automatically + - Passcode incorrect - Koden er forkert + If you select this option, opie-login will automagically log you in with the user you have selected in the drop-down list. + +For the Zaurus 5x00 this is always the user "root". + - The passcode entered is incorrect. -Access denied - Den indtastede kode er forkert. -Adgang nægtet + This drop-down list allows you to select the user for auto-login +(if enabled above). + +You can only select an actually configured user. + + + + MultiauthConfig - Any - Vilkårlig + Security configuration + - None - Ingen + Load which plugins in what order: + - Enter new passcode - Indtast ny kode + Check a checkbox to activate/deactivate a plugin or use the arrow buttons on the right to change the order they will appear in + - Re-enter new passcode - Gentag ny kode + Move Up + + + + Move Down + + + + plugins + + + + Authentication + + + + Login + + + + Sync + Synkronisering Attention @@ -79,32 +105,124 @@ Adgang nægtet 1.0.0.0/8 + + Any + Vilkårlig + + + None + Ingen + + + + MultiauthGeneralConfig + + When to lock Opie + + + + on Opie start + + + + on Opie resume + + + + Multiple plugins authentication + + + + Required successes + + + + Debug options + + + + Don't protect this config screen + + + + Show explanatory screens + + + + Allow to bypass authentication + + + + Note: the third option implies the second one + + + + + Security + + Set passcode + Vælg kode + + + Change passcode + Skift kode + + + Enter passcode + Indtast kode + + + Passcode incorrect + Koden er forkert + + + The passcode entered is incorrect. +Access denied + Den indtastede kode er forkert. +Adgang nægtet + + + Any + Vilkårlig + + + None + Ingen + + + Enter new passcode + Indtast ny kode + + + Re-enter new passcode + Gentag ny kode + SecurityBase Security Settings - Sikkerheds Indstillinger + Sikkerheds Indstillinger Change passcode - Skift kode + Skift kode Clear passcode - Slet kode + Slet kode Require pass code at power-on - Spørg efter kode ved opstart + Spørg efter kode ved opstart Sync - Synkronisering + Synkronisering Accept sync from network: - Tillad synkronisering fra netværk: + Tillad synkronisering fra netværk: 192.168.129.0/24 (default) @@ -120,47 +238,26 @@ Adgang nægtet <P>Pass code protection provides a minimal level of protection from casual access to this device. - <P>Beskyttelse med kode giver en minimal sikkerhed mod almindelig adgang til denne enhed. + <P>Beskyttelse med kode giver en minimal sikkerhed mod almindelig adgang til denne enhed. Passcode - Kodeord - - - Login - - - - Login Automatically - - - - This button will let you change the security passcode. - -Note: This is *not* the sync password. - - - - Delete the current passcode. -You can enter a new one at any time. - + Kodeord + + + SyncBase - If you enable this option, a passcode must be entered after every resume event of your Zaurus. + SyncBase - If you select this option, opie-login will automagically log you in with the user you have selected in the drop-down list. - -For the Zaurus 5x00 this is always the user "root". - + Sync + Synkronisering - This drop-down list allows you to select the user for auto-login -(if enabled above). - -You can only select an actually configured user. - + Accept sync from network: + Tillad synkronisering fra netværk: Select a net-range or enter a new one. @@ -204,15 +301,15 @@ Beware that all manually entered net ranges will be lost! - IntelliSync + Qtopia 1.7 - Qtopia 1.7 + Opie 1.0 - Opie 1.0 + IntelliSync diff --git a/i18n/de/security.ts b/i18n/de/security.ts index 693dcc0..45571c3 100644 --- a/i18n/de/security.ts +++ b/i18n/de/security.ts @@ -1,43 +1,70 @@ iso8859-1 - Security + LoginBase - Set passcode - Passwort einstellen + LoginBase + - Change passcode - Passwort ändern + Login + Login - Enter passcode - Passwort eingeben + Login Automatically + Automatisch einloggen - Passcode incorrect - Passwort falsch + If you select this option, opie-login will automagically log you in with the user you have selected in the drop-down list. + +For the Zaurus 5x00 this is always the user "root". + - The passcode entered is incorrect. -Access denied - Das eingegebene Passwort ist falsch. Zugriff verwehrt + This drop-down list allows you to select the user for auto-login +(if enabled above). + +You can only select an actually configured user. + + + + MultiauthConfig - Any - Alle + Security configuration + - None - Keine + Load which plugins in what order: + - Enter new passcode - Neues Passwort eingeben + Check a checkbox to activate/deactivate a plugin or use the arrow buttons on the right to change the order they will appear in + - Re-enter new passcode - Passwort erneut eingeben + Move Up + + + + Move Down + + + + plugins + + + + Authentication + + + + Login + Login + + + Sync + Synchroniseren Attention @@ -79,33 +106,148 @@ Access denied 1.0.0.0/8 1.0.0.0/8 + + Any + Alle + + + None + Keine + + + + MultiauthGeneralConfig + + When to lock Opie + + + + on Opie start + + + + on Opie resume + + + + Multiple plugins authentication + + + + Required successes + + + + Debug options + + + + Don't protect this config screen + + + + Show explanatory screens + + + + Allow to bypass authentication + + + + Note: the third option implies the second one + + + + + Security + + Set passcode + Passwort einstellen + + + Change passcode + Passwort ändern + + + Enter passcode + Passwort eingeben + + + Passcode incorrect + Passwort falsch + + + The passcode entered is incorrect. +Access denied + Das eingegebene Passwort ist falsch. Zugriff verwehrt + + + Any + Alle + + + None + Keine + + + Enter new passcode + Neues Passwort eingeben + + + Re-enter new passcode + Passwort erneut eingeben + + + 192.168.129.0/24 + 192.168.129.0/24 + + + 192.168.1.0/24 + 192.168.1.0/24 + + + 192.168.0.0/16 + 192.168.0.0/16 + + + 172.16.0.0/12 + 172.16.0.0/12 + + + 10.0.0.0/8 + 10.0.0.0/8 + + + 1.0.0.0/8 + 1.0.0.0/8 + SecurityBase Security Settings - Sicherheitseinstellungen + Sicherheitseinstellungen Change passcode - Passwort ändern + Passwort ändern Clear passcode - Passwort löschen + Passwort löschen Require pass code at power-on - Passwort muss beim Starten + Passwort muss beim Starten eingegeben werden Sync - Synchroniseren + Synchroniseren Accept sync from network: - Synchronisierung gestatten aus dem Netzwerk: + Synchronisierung gestatten aus dem Netzwerk: 192.168.0.0/16 @@ -129,7 +271,7 @@ eingegeben werden <P>Pass code protection provides a minimal level of protection from casual access to this device. - <P>Das Passwort bietet einen minimalen Schutz, + <P>Das Passwort bietet einen minimalen Schutz, sollte jemand unerwünscht Zugriff auf dieses Gerät erhalten. @@ -147,43 +289,30 @@ Gerät erhalten. Passcode - Passwort + Passwort Login - Login + Login Login Automatically - Automatisch einloggen - - - This button will let you change the security passcode. - -Note: This is *not* the sync password. - - - - Delete the current passcode. -You can enter a new one at any time. - + Automatisch einloggen + + + SyncBase - If you enable this option, a passcode must be entered after every resume event of your Zaurus. + SyncBase - If you select this option, opie-login will automagically log you in with the user you have selected in the drop-down list. - -For the Zaurus 5x00 this is always the user "root". - + Sync + Synchroniseren - This drop-down list allows you to select the user for auto-login -(if enabled above). - -You can only select an actually configured user. - + Accept sync from network: + Synchronisierung gestatten aus dem Netzwerk: Select a net-range or enter a new one. @@ -227,15 +356,15 @@ Beware that all manually entered net ranges will be lost! - IntelliSync + Qtopia 1.7 - Qtopia 1.7 + Opie 1.0 - Opie 1.0 + IntelliSync diff --git a/i18n/dk/security.ts b/i18n/dk/security.ts index 1530ddb..4f105ad 100644 --- a/i18n/dk/security.ts +++ b/i18n/dk/security.ts @@ -1,144 +1,172 @@ - Security + LoginBase - Attention + LoginBase - <p>All user-defined net ranges will be lost. + Login - Cancel + Login Automatically - Ok + If you select this option, opie-login will automagically log you in with the user you have selected in the drop-down list. + +For the Zaurus 5x00 this is always the user "root". - 192.168.129.0/24 + This drop-down list allows you to select the user for auto-login +(if enabled above). + +You can only select an actually configured user. + + + MultiauthConfig - 192.168.1.0/24 + Security configuration - 192.168.0.0/16 + Load which plugins in what order: - 172.16.0.0/12 + Check a checkbox to activate/deactivate a plugin or use the arrow buttons on the right to change the order they will appear in - 10.0.0.0/8 + Move Up - 1.0.0.0/8 + Move Down - Any + plugins - None + Authentication - Set passcode + Login - Change passcode + Sync - Enter passcode + Attention - Passcode incorrect + <p>All user-defined net ranges will be lost. - The passcode entered is incorrect. -Access denied + Cancel - Enter new passcode + Ok - Re-enter new passcode + 192.168.129.0/24 - - - SecurityBase - Security Settings + 192.168.1.0/24 - Passcode + 192.168.0.0/16 - Change passcode + 172.16.0.0/12 - This button will let you change the security passcode. - -Note: This is *not* the sync password. + 10.0.0.0/8 + + + + 1.0.0.0/8 - Clear passcode + Any - Delete the current passcode. -You can enter a new one at any time. + None + + + MultiauthGeneralConfig - Require pass code at power-on + When to lock Opie - If you enable this option, a passcode must be entered after every resume event of your Zaurus. + on Opie start - <P>Pass code protection provides a minimal level of protection from casual access to this device. + on Opie resume - Login + Multiple plugins authentication - Login Automatically + Required successes - If you select this option, opie-login will automagically log you in with the user you have selected in the drop-down list. - -For the Zaurus 5x00 this is always the user "root". + Debug options - This drop-down list allows you to select the user for auto-login -(if enabled above). - -You can only select an actually configured user. + Don't protect this config screen + + + + Show explanatory screens + + + + Allow to bypass authentication + + + + Note: the third option implies the second one + + + + + Security + + + SecurityBase + + + SyncBase + + SyncBase @@ -191,15 +219,15 @@ Beware that all manually entered net ranges will be lost! - IntelliSync + Qtopia 1.7 - Qtopia 1.7 + Opie 1.0 - Opie 1.0 + IntelliSync diff --git a/i18n/en/security.ts b/i18n/en/security.ts index 9dbe05b..4f105ad 100644 --- a/i18n/en/security.ts +++ b/i18n/en/security.ts @@ -1,41 +1,68 @@ - Security + LoginBase - Set passcode + LoginBase - Change passcode + Login - Enter passcode + Login Automatically - Passcode incorrect + If you select this option, opie-login will automagically log you in with the user you have selected in the drop-down list. + +For the Zaurus 5x00 this is always the user "root". - The passcode entered is incorrect. -Access denied + This drop-down list allows you to select the user for auto-login +(if enabled above). + +You can only select an actually configured user. + + + MultiauthConfig - Any + Security configuration - None + Load which plugins in what order: + + + + Check a checkbox to activate/deactivate a plugin or use the arrow buttons on the right to change the order they will appear in - Enter new passcode + Move Up - Re-enter new passcode + Move Down + + + + plugins + + + + Authentication + + + + Login + + + + Sync @@ -78,75 +105,76 @@ Access denied 1.0.0.0/8 - - - SecurityBase - Security Settings + Any - Change passcode + None + + + MultiauthGeneralConfig - Clear passcode + When to lock Opie - Require pass code at power-on + on Opie start - Sync + on Opie resume - Accept sync from network: + Multiple plugins authentication - <P>Pass code protection provides a minimal level of protection from casual access to this device. + Required successes - Passcode + Debug options - Login + Don't protect this config screen - Login Automatically + Show explanatory screens - This button will let you change the security passcode. - -Note: This is *not* the sync password. + Allow to bypass authentication - Delete the current passcode. -You can enter a new one at any time. + Note: the third option implies the second one + + + Security + + + SecurityBase + + + SyncBase - If you enable this option, a passcode must be entered after every resume event of your Zaurus. + SyncBase - If you select this option, opie-login will automagically log you in with the user you have selected in the drop-down list. - -For the Zaurus 5x00 this is always the user "root". + Sync - This drop-down list allows you to select the user for auto-login -(if enabled above). - -You can only select an actually configured user. + Accept sync from network: @@ -191,15 +219,15 @@ Beware that all manually entered net ranges will be lost! - IntelliSync + Qtopia 1.7 - Qtopia 1.7 + Opie 1.0 - Opie 1.0 + IntelliSync diff --git a/i18n/es/security.ts b/i18n/es/security.ts index 5533dcb..5c5be3c 100644 --- a/i18n/es/security.ts +++ b/i18n/es/security.ts @@ -1,43 +1,69 @@ - Security + LoginBase - Set passcode - Fijar código + LoginBase + - Change passcode - Cambiar código + Login + Identificación - Enter passcode - Introducir código + Login Automatically + Identificación automática - Passcode incorrect - Código Incorrecto + If you select this option, opie-login will automagically log you in with the user you have selected in the drop-down list. + +For the Zaurus 5x00 this is always the user "root". + - The passcode entered is incorrect. -Access denied - El código introducido es incorrecto. -Acceso denegado + This drop-down list allows you to select the user for auto-login +(if enabled above). + +You can only select an actually configured user. + + + + + MultiauthConfig + + Security configuration + - Any - Cualquiera + Load which plugins in what order: + - None - Ninguna + Check a checkbox to activate/deactivate a plugin or use the arrow buttons on the right to change the order they will appear in + - Enter new passcode - Teclee nuevo código + Move Up + - Re-enter new passcode - Reintroduzca nuevo código + Move Down + + + + plugins + + + + Authentication + + + + Login + Identificación + + + Sync + Sincronizar Attention @@ -79,32 +105,148 @@ Acceso denegado 1.0.0.0/8 1.0.0.0/8 + + Any + Cualquiera + + + None + Ninguna + + + + MultiauthGeneralConfig + + When to lock Opie + + + + on Opie start + + + + on Opie resume + + + + Multiple plugins authentication + + + + Required successes + + + + Debug options + + + + Don't protect this config screen + + + + Show explanatory screens + + + + Allow to bypass authentication + + + + Note: the third option implies the second one + + + + + Security + + Set passcode + Fijar código + + + Change passcode + Cambiar código + + + Enter passcode + Introducir código + + + Passcode incorrect + Código Incorrecto + + + The passcode entered is incorrect. +Access denied + El código introducido es incorrecto. +Acceso denegado + + + Any + Cualquiera + + + None + Ninguna + + + Enter new passcode + Teclee nuevo código + + + Re-enter new passcode + Reintroduzca nuevo código + + + 192.168.129.0/24 + 192.168.129.0/24 + + + 192.168.1.0/24 + 192.168.1.0/24 + + + 192.168.0.0/16 + 192.168.0.0/16 + + + 172.16.0.0/12 + 172.16.0.0/12 + + + 10.0.0.0/8 + 10.0.0.0/8 + + + 1.0.0.0/8 + 1.0.0.0/8 + SecurityBase Security Settings - Configuración de Seguridad + Configuración de Seguridad Change passcode - Cambiar código + Cambiar código Clear passcode - Borrar código + Borrar código Require pass code at power-on - Solicitar código al encender + Solicitar código al encender Sync - Sincronizar + Sincronizar Accept sync from network: - Sincronización desde red: + Sincronización desde red: 192.168.129.0/24 (default) @@ -136,7 +278,7 @@ Acceso denegado <P>Pass code protection provides a minimal level of protection from casual access to this device. - <P>Elegir un código proporciona un mínimo nivel de protección contra accesos ocasionales al dispositivo. + <P>Elegir un código proporciona un mínimo nivel de protección contra accesos ocasionales al dispositivo. 1.0.0.0/8 @@ -144,43 +286,30 @@ Acceso denegado Passcode - Código + Código Login - Identificación + Identificación Login Automatically - Identificación automática - - - This button will let you change the security passcode. - -Note: This is *not* the sync password. - - - - Delete the current passcode. -You can enter a new one at any time. - + Identificación automática + + + SyncBase - If you enable this option, a passcode must be entered after every resume event of your Zaurus. + SyncBase - If you select this option, opie-login will automagically log you in with the user you have selected in the drop-down list. - -For the Zaurus 5x00 this is always the user "root". - + Sync + Sincronizar - This drop-down list allows you to select the user for auto-login -(if enabled above). - -You can only select an actually configured user. - + Accept sync from network: + Sincronización desde red: Select a net-range or enter a new one. @@ -224,15 +353,15 @@ Beware that all manually entered net ranges will be lost! - IntelliSync + Qtopia 1.7 - Qtopia 1.7 + Opie 1.0 - Opie 1.0 + IntelliSync diff --git a/i18n/fr/security.ts b/i18n/fr/security.ts index b3a9e8c..52d927f 100644 --- a/i18n/fr/security.ts +++ b/i18n/fr/security.ts @@ -1,86 +1,248 @@ iso8859-1 + LoginBase + + LoginBase + + + + Login + Nom de connexion + + + Login Automatically + Connexion automatique + + + If you select this option, opie-login will automagically log you in with the user you have selected in the drop-down list. + +For the Zaurus 5x00 this is always the user "root". + Si vous activez cette option, opie-login vous ouvrira automatiquement une session avec le nom d'utilisateur de la liste déroulante. + +Pour le Zaurus 5x00 c'est toujours l'utilisateur "root". + + + This drop-down list allows you to select the user for auto-login +(if enabled above). + +You can only select an actually configured user. + Cette liste déroulante vous permet de sélectionnez le nom d'utilisateur à utiliser lors de l'ouverture de session automatique. + +Vous ne pouvez sélectionner qu'un nom d'utilisateur existant. + + + + MultiauthConfig + + Security configuration + + + + Load which plugins in what order: + + + + Check a checkbox to activate/deactivate a plugin or use the arrow buttons on the right to change the order they will appear in + + + + Move Up + + + + Move Down + + + + plugins + + + + Authentication + + + + Login + Nom de connexion + + + Sync + Synchronisation + + + Attention + Attention + + + <p>All user-defined net ranges will be lost. + <p>Tous les paramètres utilisateurs seront perdus. + + + Cancel + Annuler + + + Ok + OK + + + 192.168.129.0/24 + 192.168.129.0/24 + + + 192.168.1.0/24 + 192.168.1.0/24 + + + 192.168.0.0/16 + 192.168.0.0/16 + + + 172.16.0.0/12 + 172.16.0.0/12 + + + 10.0.0.0/8 + 10.0.0.0/8 + + + 1.0.0.0/8 + 1.0.0.0/8 + + + Any + Tous + + + None + Aucun + + + + MultiauthGeneralConfig + + When to lock Opie + + + + on Opie start + + + + on Opie resume + + + + Multiple plugins authentication + + + + Required successes + + + + Debug options + + + + Don't protect this config screen + + + + Show explanatory screens + + + + Allow to bypass authentication + + + + Note: the third option implies the second one + + + + Security Set passcode - Entrer le + Entrer le mot de passe Change passcode - Changer le + Changer le mot de passe Enter passcode - Entrer mot de passe + Entrer mot de passe Passcode incorrect - Mot de passe incorrect + Mot de passe incorrect The passcode entered is incorrect. Access denied - Le mot de passe est incorrect. + Le mot de passe est incorrect. Accès refusé Any - Tous + Tous None - Aucun + Aucun Enter new passcode - Entrer le nouveau mot de passe + Entrer le nouveau mot de passe Re-enter new passcode - Réentrez le mot de passe + Réentrez le mot de passe Attention - Attention + Attention <p>All user-defined net ranges will be lost. - <p>Tous les paramètres utilisateurs seront perdus. + <p>Tous les paramètres utilisateurs seront perdus. Cancel - Annuler + Annuler Ok - OK + OK 192.168.129.0/24 - 192.168.129.0/24 + 192.168.129.0/24 192.168.1.0/24 - 192.168.1.0/24 + 192.168.1.0/24 192.168.0.0/16 - 192.168.0.0/16 + 192.168.0.0/16 172.16.0.0/12 - 172.16.0.0/12 + 172.16.0.0/12 10.0.0.0/8 - 10.0.0.0/8 + 10.0.0.0/8 1.0.0.0/8 - 1.0.0.0/8 + 1.0.0.0/8 WARNING @@ -95,29 +257,29 @@ Accès refusé SecurityBase Security Settings - Paramètres de sécurité + Paramètres de sécurité Change passcode - Changer le + Changer le mot de passe Clear passcode - Effacer le + Effacer le mot de passe Require pass code at power-on - Demander le mot de passe au démarrage + Demander le mot de passe au démarrage Sync - Synchronisation + Synchronisation Accept sync from network: - Accepter la synchronisation par réseau de : + Accepter la synchronisation par réseau de : 192.168.0.0/16 @@ -141,7 +303,7 @@ mot de passe <P>Pass code protection provides a minimal level of protection from casual access to this device. - <P>Ce mot de passe vous permet de protéger l'accès à votre organiseur. + <P>Ce mot de passe vous permet de protéger l'accès à votre organiseur. 192.168.129.0/24 (default) @@ -157,39 +319,39 @@ mot de passe Passcode - Mot de Passe + Mot de Passe Login - Nom de connexion + Nom de connexion Login Automatically - Connexion automatique + Connexion automatique This button will let you change the security passcode. Note: This is *not* the sync password. - Ce bouton vous permet de changer le mot de passe de sécurité + Ce bouton vous permet de changer le mot de passe de sécurité Note : Ne pas confondre avec le mot de passe de synchronisation. Delete the current passcode. You can enter a new one at any time. - Supprimer le mot de passe courant. + Supprimer le mot de passe courant. Vous pourrez en entrer un nouveau à n'importe qu'elle moment. If you enable this option, a passcode must be entered after every resume event of your Zaurus. - Si vous activez cette option, un mot de passe sera demandé après chaque allumage du Zaurus. + Si vous activez cette option, un mot de passe sera demandé après chaque allumage du Zaurus. If you select this option, opie-login will automagically log you in with the user you have selected in the drop-down list. For the Zaurus 5x00 this is always the user "root". - Si vous activez cette option, opie-login vous ouvrira automatiquement une session avec le nom d'utilisateur de la liste déroulante. + Si vous activez cette option, opie-login vous ouvrira automatiquement une session avec le nom d'utilisateur de la liste déroulante. Pour le Zaurus 5x00 c'est toujours l'utilisateur "root". @@ -198,7 +360,7 @@ Pour le Zaurus 5x00 c'est toujours l'utilisateur "root". - Cette liste déroulante vous permet de sélectionnez le nom d'utilisateur à utiliser lors de l'ouverture de session automatique. + Cette liste déroulante vous permet de sélectionnez le nom d'utilisateur à utiliser lors de l'ouverture de session automatique. Vous ne pouvez sélectionner qu'un nom d'utilisateur existant. @@ -213,7 +375,7 @@ The entry "All" will allow *any* IP to connect. The entry "None" will *deny* any connection. If unsure, select "Any". - Sélectionnez une plage d'adresses IP. + Sélectionnez une plage d'adresses IP. Cette liste déroulante vous permet de sélectionnez qui du réseau peut se connecter à votre Zaurus. @@ -226,7 +388,7 @@ Si vous n'êtes pas sur, sélectionnez "Tous". Delete Entry - Supprimer entrée + Supprimer entrée Delete the selected net range from the list @@ -235,24 +397,24 @@ If you press this button, the currently selected net range will be deleted from If you hit this button in error, the button "Restore Defaults" will restore the list to the state it has been when you initially booted your Zaurus. - Supprime la plage d'adresse IP de la liste. + Supprime la plage d'adresse IP de la liste. Restore Defaults - Paramètres par défaut + Paramètres par défaut This button will restore the list of net ranges to the defaults. Beware that all manually entered net ranges will be lost! - Ce bouton restaure une liste de plage IP par défaut. + Ce bouton restaure une liste de plage IP par défaut. Attention : Toutes les plages d'adresse IP entrées manuellement seront perdus! Select your sync software - Sélectionnez votre logiciel de synchronisation + Sélectionnez votre logiciel de synchronisation QTopia @@ -260,7 +422,7 @@ Attention : Toutes les plages d'adresse IP entrées manuellement seront per IntelliSync - IntelliSync + IntelliSync This option changes the login behaviour of the internal FTP server. @@ -278,26 +440,94 @@ Attention : les mots de passe sont sensibles à la case (i.e HeLLo est différen Qtopia 1.7 - Qtopia 1.7 + Qtopia 1.7 Opie 1.0 - Opie 1.0 + Opie 1.0 Both Les deux + + + SyncBase - Alter the Sync Protocol to tweak for the different devices. - IntelliSync will disable the password check but you'll be prompted to accept the connection. - Opie1.0 will be compatible with QtopiaDesktop, MultiSync and KitchenSync - Qtopia1.7 will alter the way data is send to the client and will not work with older clients. - - Modifie le protocole de synchronisation pour s'adapter aux différents appareils. - IntelliSync désactivera la vérification du mot de passe mais il vous sera demandé de confirmer la connexion. - Opie 1.0 sera compatible avec Qtopia Desktop, MultiSync et KitchenSync. - Qtopia 1.7 va modifier la façon dont les données sont envoyées au client et ne fonctionnera pas avec d'autres clients. + SyncBase + + + + Sync + Synchronisation + + + Accept sync from network: + Accepter la synchronisation par réseau de : + + + Select a net-range or enter a new one. + +This drop-down list lets you select a net range which is allowed to connect to your Zaurus. + +For example, a net range of 192.168.1.0/24 will allow any machine with an IP between 192.168.1.1 and 192.168.1.254 to connect to (and sync with) your Zaurus. + +The entry "All" will allow *any* IP to connect. +The entry "None" will *deny* any connection. + +If unsure, select "Any". + Sélectionnez une plage d'adresses IP. + +Cette liste déroulante vous permet de sélectionnez qui du réseau peut se connecter à votre Zaurus. + +Par exemple, une plage d'adresses du type 192.168.1.0/24 permettra aux machines ayant une adresse IP entre 192.168.1.1 et 192.168.1.254 de se connecter (et se synchroniserà avec le Zaurus. + +L'option "Tous" permet à *toutes* adresse IP de se connecter. +L'option "Aucun" empêchera *toutes* adresse IP de se connecter. + +Si vous n'êtes pas sur, sélectionnez "Tous". + + + Delete Entry + Supprimer entrée + + + Delete the selected net range from the list + +If you press this button, the currently selected net range will be deleted from the list of net ranges. + +If you hit this button in error, the button "Restore Defaults" will restore +the list to the state it has been when you initially booted your Zaurus. + Supprime la plage d'adresse IP de la liste. + + + Restore Defaults + Paramètres par défaut + + + This button will restore the list of net ranges +to the defaults. + +Beware that all manually entered net ranges will be lost! + Ce bouton restaure une liste de plage IP par défaut. + +Attention : Toutes les plages d'adresse IP entrées manuellement seront perdus! + + + Select your sync software + Sélectionnez votre logiciel de synchronisation + + + Qtopia 1.7 + Qtopia 1.7 + + + Opie 1.0 + Opie 1.0 + + + IntelliSync + IntelliSync Alter the Sync Protocol to tweak for the different devices. diff --git a/i18n/hu/security.ts b/i18n/hu/security.ts index 9dbe05b..4f105ad 100644 --- a/i18n/hu/security.ts +++ b/i18n/hu/security.ts @@ -1,41 +1,68 @@ - Security + LoginBase - Set passcode + LoginBase - Change passcode + Login - Enter passcode + Login Automatically - Passcode incorrect + If you select this option, opie-login will automagically log you in with the user you have selected in the drop-down list. + +For the Zaurus 5x00 this is always the user "root". - The passcode entered is incorrect. -Access denied + This drop-down list allows you to select the user for auto-login +(if enabled above). + +You can only select an actually configured user. + + + MultiauthConfig - Any + Security configuration - None + Load which plugins in what order: + + + + Check a checkbox to activate/deactivate a plugin or use the arrow buttons on the right to change the order they will appear in - Enter new passcode + Move Up - Re-enter new passcode + Move Down + + + + plugins + + + + Authentication + + + + Login + + + + Sync @@ -78,75 +105,76 @@ Access denied 1.0.0.0/8 - - - SecurityBase - Security Settings + Any - Change passcode + None + + + MultiauthGeneralConfig - Clear passcode + When to lock Opie - Require pass code at power-on + on Opie start - Sync + on Opie resume - Accept sync from network: + Multiple plugins authentication - <P>Pass code protection provides a minimal level of protection from casual access to this device. + Required successes - Passcode + Debug options - Login + Don't protect this config screen - Login Automatically + Show explanatory screens - This button will let you change the security passcode. - -Note: This is *not* the sync password. + Allow to bypass authentication - Delete the current passcode. -You can enter a new one at any time. + Note: the third option implies the second one + + + Security + + + SecurityBase + + + SyncBase - If you enable this option, a passcode must be entered after every resume event of your Zaurus. + SyncBase - If you select this option, opie-login will automagically log you in with the user you have selected in the drop-down list. - -For the Zaurus 5x00 this is always the user "root". + Sync - This drop-down list allows you to select the user for auto-login -(if enabled above). - -You can only select an actually configured user. + Accept sync from network: @@ -191,15 +219,15 @@ Beware that all manually entered net ranges will be lost! - IntelliSync + Qtopia 1.7 - Qtopia 1.7 + Opie 1.0 - Opie 1.0 + IntelliSync diff --git a/i18n/it/security.ts b/i18n/it/security.ts index c32444c..15bf662 100644 --- a/i18n/it/security.ts +++ b/i18n/it/security.ts @@ -1,44 +1,70 @@ iso8859-1 - Security + LoginBase - Set passcode - Imposta password + LoginBase + - Change passcode - Cambia password + Login + Login - Enter passcode - Inserisci password + Login Automatically + Login Automatico - Passcode incorrect - Password errata + If you select this option, opie-login will automagically log you in with the user you have selected in the drop-down list. + +For the Zaurus 5x00 this is always the user "root". + - The passcode entered is incorrect. -Access denied - La password inserita è sbagliata. -Accesso negato + This drop-down list allows you to select the user for auto-login +(if enabled above). + +You can only select an actually configured user. + + + + + MultiauthConfig + + Security configuration + - Any - Tutti + Load which plugins in what order: + - None - Nessuno + Check a checkbox to activate/deactivate a plugin or use the arrow buttons on the right to change the order they will appear in + - Enter new passcode - Inserisci nuova password + Move Up + - Re-enter new passcode - Rinserisci nuova password + Move Down + + + + plugins + + + + Authentication + + + + Login + Login + + + Sync + Sync Attention @@ -80,32 +106,148 @@ Accesso negato 1.0.0.0/8 1.0.0.0/8 + + Any + + + + None + + + + + MultiauthGeneralConfig + + When to lock Opie + + + + on Opie start + + + + on Opie resume + + + + Multiple plugins authentication + + + + Required successes + + + + Debug options + + + + Don't protect this config screen + + + + Show explanatory screens + + + + Allow to bypass authentication + + + + Note: the third option implies the second one + + + + + Security + + Set passcode + Imposta password + + + Change passcode + Cambia password + + + Enter passcode + Inserisci password + + + Passcode incorrect + Password errata + + + The passcode entered is incorrect. +Access denied + La password inserita è sbagliata. +Accesso negato + + + Any + Tutti + + + None + Nessuno + + + Enter new passcode + Inserisci nuova password + + + Re-enter new passcode + Rinserisci nuova password + + + 192.168.129.0/24 + 192.168.129.0/24 + + + 192.168.1.0/24 + 192.168.1.0/24 + + + 192.168.0.0/16 + 192.168.0.0/16 + + + 172.16.0.0/12 + 172.16.0.0/12 + + + 10.0.0.0/8 + 10.0.0.0/8 + + + 1.0.0.0/8 + 1.0.0.0/8 + SecurityBase Security Settings - Impostazioni Sicurezza + Impostazioni Sicurezza Change passcode - Cambia password + Cambia password Clear passcode - Cancella password + Cancella password Require pass code at power-on - Richiedi password all'avvio + Richiedi password all'avvio Sync - Sync + Sync Accept sync from network: - Accetta sync dalla rete: + Accetta sync dalla rete: 192.168.129.0/24 (default) @@ -137,7 +279,7 @@ Accesso negato <P>Pass code protection provides a minimal level of protection from casual access to this device. - <P>La protezione mediante password fornisce un minimo livello di protezione dall'accesso illegale del dispositivo. + <P>La protezione mediante password fornisce un minimo livello di protezione dall'accesso illegale del dispositivo. 1.0.0.0/8 @@ -145,43 +287,30 @@ Accesso negato Passcode - Password + Password Login - Login + Login Login Automatically - Login Automatico - - - This button will let you change the security passcode. - -Note: This is *not* the sync password. - - - - Delete the current passcode. -You can enter a new one at any time. - + Login Automatico + + + SyncBase - If you enable this option, a passcode must be entered after every resume event of your Zaurus. + SyncBase - If you select this option, opie-login will automagically log you in with the user you have selected in the drop-down list. - -For the Zaurus 5x00 this is always the user "root". - + Sync + Sync - This drop-down list allows you to select the user for auto-login -(if enabled above). - -You can only select an actually configured user. - + Accept sync from network: + Accetta sync dalla rete: Select a net-range or enter a new one. @@ -225,15 +354,15 @@ Beware that all manually entered net ranges will be lost! - IntelliSync + Qtopia 1.7 - Qtopia 1.7 + Opie 1.0 - Opie 1.0 + IntelliSync diff --git a/i18n/ja/security.ts b/i18n/ja/security.ts index 1530ddb..4f105ad 100644 --- a/i18n/ja/security.ts +++ b/i18n/ja/security.ts @@ -1,144 +1,172 @@ - Security + LoginBase - Attention + LoginBase - <p>All user-defined net ranges will be lost. + Login - Cancel + Login Automatically - Ok + If you select this option, opie-login will automagically log you in with the user you have selected in the drop-down list. + +For the Zaurus 5x00 this is always the user "root". - 192.168.129.0/24 + This drop-down list allows you to select the user for auto-login +(if enabled above). + +You can only select an actually configured user. + + + MultiauthConfig - 192.168.1.0/24 + Security configuration - 192.168.0.0/16 + Load which plugins in what order: - 172.16.0.0/12 + Check a checkbox to activate/deactivate a plugin or use the arrow buttons on the right to change the order they will appear in - 10.0.0.0/8 + Move Up - 1.0.0.0/8 + Move Down - Any + plugins - None + Authentication - Set passcode + Login - Change passcode + Sync - Enter passcode + Attention - Passcode incorrect + <p>All user-defined net ranges will be lost. - The passcode entered is incorrect. -Access denied + Cancel - Enter new passcode + Ok - Re-enter new passcode + 192.168.129.0/24 - - - SecurityBase - Security Settings + 192.168.1.0/24 - Passcode + 192.168.0.0/16 - Change passcode + 172.16.0.0/12 - This button will let you change the security passcode. - -Note: This is *not* the sync password. + 10.0.0.0/8 + + + + 1.0.0.0/8 - Clear passcode + Any - Delete the current passcode. -You can enter a new one at any time. + None + + + MultiauthGeneralConfig - Require pass code at power-on + When to lock Opie - If you enable this option, a passcode must be entered after every resume event of your Zaurus. + on Opie start - <P>Pass code protection provides a minimal level of protection from casual access to this device. + on Opie resume - Login + Multiple plugins authentication - Login Automatically + Required successes - If you select this option, opie-login will automagically log you in with the user you have selected in the drop-down list. - -For the Zaurus 5x00 this is always the user "root". + Debug options - This drop-down list allows you to select the user for auto-login -(if enabled above). - -You can only select an actually configured user. + Don't protect this config screen + + + + Show explanatory screens + + + + Allow to bypass authentication + + + + Note: the third option implies the second one + + + + + Security + + + SecurityBase + + + SyncBase + + SyncBase @@ -191,15 +219,15 @@ Beware that all manually entered net ranges will be lost! - IntelliSync + Qtopia 1.7 - Qtopia 1.7 + Opie 1.0 - Opie 1.0 + IntelliSync diff --git a/i18n/ko/security.ts b/i18n/ko/security.ts index 1530ddb..4f105ad 100644 --- a/i18n/ko/security.ts +++ b/i18n/ko/security.ts @@ -1,144 +1,172 @@ - Security + LoginBase - Attention + LoginBase - <p>All user-defined net ranges will be lost. + Login - Cancel + Login Automatically - Ok + If you select this option, opie-login will automagically log you in with the user you have selected in the drop-down list. + +For the Zaurus 5x00 this is always the user "root". - 192.168.129.0/24 + This drop-down list allows you to select the user for auto-login +(if enabled above). + +You can only select an actually configured user. + + + MultiauthConfig - 192.168.1.0/24 + Security configuration - 192.168.0.0/16 + Load which plugins in what order: - 172.16.0.0/12 + Check a checkbox to activate/deactivate a plugin or use the arrow buttons on the right to change the order they will appear in - 10.0.0.0/8 + Move Up - 1.0.0.0/8 + Move Down - Any + plugins - None + Authentication - Set passcode + Login - Change passcode + Sync - Enter passcode + Attention - Passcode incorrect + <p>All user-defined net ranges will be lost. - The passcode entered is incorrect. -Access denied + Cancel - Enter new passcode + Ok - Re-enter new passcode + 192.168.129.0/24 - - - SecurityBase - Security Settings + 192.168.1.0/24 - Passcode + 192.168.0.0/16 - Change passcode + 172.16.0.0/12 - This button will let you change the security passcode. - -Note: This is *not* the sync password. + 10.0.0.0/8 + + + + 1.0.0.0/8 - Clear passcode + Any - Delete the current passcode. -You can enter a new one at any time. + None + + + MultiauthGeneralConfig - Require pass code at power-on + When to lock Opie - If you enable this option, a passcode must be entered after every resume event of your Zaurus. + on Opie start - <P>Pass code protection provides a minimal level of protection from casual access to this device. + on Opie resume - Login + Multiple plugins authentication - Login Automatically + Required successes - If you select this option, opie-login will automagically log you in with the user you have selected in the drop-down list. - -For the Zaurus 5x00 this is always the user "root". + Debug options - This drop-down list allows you to select the user for auto-login -(if enabled above). - -You can only select an actually configured user. + Don't protect this config screen + + + + Show explanatory screens + + + + Allow to bypass authentication + + + + Note: the third option implies the second one + + + + + Security + + + SecurityBase + + + SyncBase + + SyncBase @@ -191,15 +219,15 @@ Beware that all manually entered net ranges will be lost! - IntelliSync + Qtopia 1.7 - Qtopia 1.7 + Opie 1.0 - Opie 1.0 + IntelliSync diff --git a/i18n/lv/security.ts b/i18n/lv/security.ts index 1530ddb..4f105ad 100644 --- a/i18n/lv/security.ts +++ b/i18n/lv/security.ts @@ -1,144 +1,172 @@ - Security + LoginBase - Attention + LoginBase - <p>All user-defined net ranges will be lost. + Login - Cancel + Login Automatically - Ok + If you select this option, opie-login will automagically log you in with the user you have selected in the drop-down list. + +For the Zaurus 5x00 this is always the user "root". - 192.168.129.0/24 + This drop-down list allows you to select the user for auto-login +(if enabled above). + +You can only select an actually configured user. + + + MultiauthConfig - 192.168.1.0/24 + Security configuration - 192.168.0.0/16 + Load which plugins in what order: - 172.16.0.0/12 + Check a checkbox to activate/deactivate a plugin or use the arrow buttons on the right to change the order they will appear in - 10.0.0.0/8 + Move Up - 1.0.0.0/8 + Move Down - Any + plugins - None + Authentication - Set passcode + Login - Change passcode + Sync - Enter passcode + Attention - Passcode incorrect + <p>All user-defined net ranges will be lost. - The passcode entered is incorrect. -Access denied + Cancel - Enter new passcode + Ok - Re-enter new passcode + 192.168.129.0/24 - - - SecurityBase - Security Settings + 192.168.1.0/24 - Passcode + 192.168.0.0/16 - Change passcode + 172.16.0.0/12 - This button will let you change the security passcode. - -Note: This is *not* the sync password. + 10.0.0.0/8 + + + + 1.0.0.0/8 - Clear passcode + Any - Delete the current passcode. -You can enter a new one at any time. + None + + + MultiauthGeneralConfig - Require pass code at power-on + When to lock Opie - If you enable this option, a passcode must be entered after every resume event of your Zaurus. + on Opie start - <P>Pass code protection provides a minimal level of protection from casual access to this device. + on Opie resume - Login + Multiple plugins authentication - Login Automatically + Required successes - If you select this option, opie-login will automagically log you in with the user you have selected in the drop-down list. - -For the Zaurus 5x00 this is always the user "root". + Debug options - This drop-down list allows you to select the user for auto-login -(if enabled above). - -You can only select an actually configured user. + Don't protect this config screen + + + + Show explanatory screens + + + + Allow to bypass authentication + + + + Note: the third option implies the second one + + + + + Security + + + SecurityBase + + + SyncBase + + SyncBase @@ -191,15 +219,15 @@ Beware that all manually entered net ranges will be lost! - IntelliSync + Qtopia 1.7 - Qtopia 1.7 + Opie 1.0 - Opie 1.0 + IntelliSync diff --git a/i18n/mk/security.ts b/i18n/mk/security.ts index eea194d..5c1d0e5 100644 --- a/i18n/mk/security.ts +++ b/i18n/mk/security.ts @@ -1,43 +1,69 @@ - Security + LoginBase - Set passcode - Намести лозинја + LoginBase + - Change passcode - Смени лозинка + Login + - Enter passcode - Внеси лозинка + Login Automatically + - Passcode incorrect - Неточна лозинка + If you select this option, opie-login will automagically log you in with the user you have selected in the drop-down list. + +For the Zaurus 5x00 this is always the user "root". + - The passcode entered is incorrect. -Access denied - Лозинката не е точна. -Одбиен пристап + This drop-down list allows you to select the user for auto-login +(if enabled above). + +You can only select an actually configured user. + + + + MultiauthConfig - Any - Секој + Security configuration + - None - Ништо + Load which plugins in what order: + - Enter new passcode - Внеси нова лозинка + Check a checkbox to activate/deactivate a plugin or use the arrow buttons on the right to change the order they will appear in + - Re-enter new passcode - Повтторно внеси лозинка + Move Up + + + + Move Down + + + + plugins + + + + Authentication + + + + Login + + + + Sync + Синхронизирај Attention @@ -79,32 +105,148 @@ Access denied 1.0.0.0/8 1.0.0.0/8 + + Any + Секој + + + None + Ништо + + + + MultiauthGeneralConfig + + When to lock Opie + + + + on Opie start + + + + on Opie resume + + + + Multiple plugins authentication + + + + Required successes + + + + Debug options + + + + Don't protect this config screen + + + + Show explanatory screens + + + + Allow to bypass authentication + + + + Note: the third option implies the second one + + + + + Security + + Set passcode + Намести лозинја + + + Change passcode + Смени лозинка + + + Enter passcode + Внеси лозинка + + + Passcode incorrect + Неточна лозинка + + + The passcode entered is incorrect. +Access denied + Лозинката не е точна. +Одбиен пристап + + + Any + Секој + + + None + Ништо + + + Enter new passcode + Внеси нова лозинка + + + Re-enter new passcode + Повтторно внеси лозинка + + + 192.168.129.0/24 + 192.168.129.0/24 + + + 192.168.1.0/24 + 192.168.1.0/24 + + + 192.168.0.0/16 + 192.168.0.0/24 + + + 172.16.0.0/12 + 172.16.0.0/12 + + + 10.0.0.0/8 + 10.0.0.0/8 + + + 1.0.0.0/8 + 1.0.0.0/8 + SecurityBase Security Settings - Сигурносни подесувања + Сигурносни подесувања Change passcode - Смени лозинка + Смени лозинка Clear passcode - Избриши лозинка + Избриши лозинка Require pass code at power-on - Барај лозинка на подигање + Барај лозинка на подигање Sync - Синхронизирај + Синхронизирај Accept sync from network: - Прифати синхронизација од мрежа: + Прифати синхронизација од мрежа: 192.168.129.0/24 (default) @@ -140,47 +282,22 @@ Access denied <P>Pass code protection provides a minimal level of protection from casual access to this device. - <p> Заштитата со лозинка дава минимални ниво на заштита од повремен пристап до уредот. - - - Passcode - - - - Login - - - - Login Automatically - - - - This button will let you change the security passcode. - -Note: This is *not* the sync password. - - - - Delete the current passcode. -You can enter a new one at any time. - + <p> Заштитата со лозинка дава минимални ниво на заштита од повремен пристап до уредот. + + + SyncBase - If you enable this option, a passcode must be entered after every resume event of your Zaurus. + SyncBase - If you select this option, opie-login will automagically log you in with the user you have selected in the drop-down list. - -For the Zaurus 5x00 this is always the user "root". - + Sync + Синхронизирај - This drop-down list allows you to select the user for auto-login -(if enabled above). - -You can only select an actually configured user. - + Accept sync from network: + Прифати синхронизација од мрежа: Select a net-range or enter a new one. @@ -224,15 +341,15 @@ Beware that all manually entered net ranges will be lost! - IntelliSync + Qtopia 1.7 - Qtopia 1.7 + Opie 1.0 - Opie 1.0 + IntelliSync diff --git a/i18n/nl/security.ts b/i18n/nl/security.ts index d268cb7..36d6365 100644 --- a/i18n/nl/security.ts +++ b/i18n/nl/security.ts @@ -1,110 +1,273 @@ + LoginBase + + LoginBase + + + + Login + Log in + + + Login Automatically + Log automatich in + + + If you select this option, opie-login will automagically log you in with the user you have selected in the drop-down list. + +For the Zaurus 5x00 this is always the user "root". + Als deze optie gebruikt wordt, zal opie-login automagisch voor u inloggen als de gebruiker die geselecteerd is in de lijst hieronder. + +Voor de Zaurus 5x00 is dit altijd "root". + + + This drop-down list allows you to select the user for auto-login +(if enabled above). + +You can only select an actually configured user. + Op deze lijst kunt u de gebruiker voor auto-login selecteren +(als deze optie aanstaat) + +Alleen een geconfigureerd gebruiker kan geselecteerd worden. + + + + MultiauthConfig + + Security configuration + + + + Load which plugins in what order: + + + + Check a checkbox to activate/deactivate a plugin or use the arrow buttons on the right to change the order they will appear in + + + + Move Up + + + + Move Down + + + + plugins + + + + Authentication + + + + Login + Log in + + + Sync + Sync + + + Attention + Attentie + + + <p>All user-defined net ranges will be lost. + <p>Alle gebruikersinstellingen zullen verloren gaan. + + + Cancel + Annuleer + + + Ok + Ok + + + 192.168.129.0/24 + 192.168.129.0/24 + + + 192.168.1.0/24 + 192.168.1.0/24 + + + 192.168.0.0/16 + 192.168.0.0/16 + + + 172.16.0.0/12 + 172.16.0.0/12 + + + 10.0.0.0/8 + 10.0.0.0/8 + + + 1.0.0.0/8 + 1.0.0.0/8 + + + Any + Iedere + + + None + Geen + + + + MultiauthGeneralConfig + + When to lock Opie + + + + on Opie start + + + + on Opie resume + + + + Multiple plugins authentication + + + + Required successes + + + + Debug options + + + + Don't protect this config screen + + + + Show explanatory screens + + + + Allow to bypass authentication + + + + Note: the third option implies the second one + + + + Security Set passcode - Stel PINcode in + Stel PINcode in Change passcode - Verander PINcode + Verander PINcode Enter passcode - Voer PINcode in + Voer PINcode in Passcode incorrect - PINcode niet correct + PINcode niet correct The passcode entered is incorrect. Access denied - Ingevoerde PINcode is niet correct. + Ingevoerde PINcode is niet correct. Toegang geweigerd Any - Iedere + Iedere None - Geen + Geen Enter new passcode - Voer nieuwe PINcode in + Voer nieuwe PINcode in Re-enter new passcode - Voer nieuwe opnieuw PINcode in + Voer nieuwe opnieuw PINcode in Attention - Attentie + Attentie <p>All user-defined net ranges will be lost. - <p>Alle gebruikersinstellingen zullen verloren gaan. + <p>Alle gebruikersinstellingen zullen verloren gaan. Cancel - Annuleer + Annuleer Ok - Ok + Ok 192.168.129.0/24 - 192.168.129.0/24 + 192.168.129.0/24 192.168.1.0/24 - 192.168.1.0/24 + 192.168.1.0/24 192.168.0.0/16 - 192.168.0.0/16 + 192.168.0.0/16 172.16.0.0/12 - 172.16.0.0/12 + 172.16.0.0/12 10.0.0.0/8 - 10.0.0.0/8 + 10.0.0.0/8 1.0.0.0/8 - 1.0.0.0/8 + 1.0.0.0/8 SecurityBase Security Settings - Beveiligingsinstellingen + Beveiligingsinstellingen Change passcode - Verander PINcode + Verander PINcode Clear passcode - Schoon PINcode + Schoon PINcode Require pass code at power-on - Vraag PINcode bij power-aan + Vraag PINcode bij power-aan Sync - Sync + Sync Accept sync from network: - Accepteer sync van netwerk: + Accepteer sync van netwerk: 192.168.129.0/24 (default) @@ -140,43 +303,43 @@ Toegang geweigerd <P>Pass code protection provides a minimal level of protection from casual access to this device. - <p>PINcode beveiliging biedt slechts een minimale beveiliging tegen toevallige toegang tot dit apparaat. + <p>PINcode beveiliging biedt slechts een minimale beveiliging tegen toevallige toegang tot dit apparaat. Passcode - PINcode + PINcode Login - Log in + Log in Login Automatically - Log automatich in + Log automatich in This button will let you change the security passcode. Note: This is *not* the sync password. - Met deze toets kan het bebeiligingswachtwoord gewijzigd worden. + Met deze toets kan het bebeiligingswachtwoord gewijzigd worden. Let op: Dit is *niet* het synchronisatiewachtwoord. Delete the current passcode. You can enter a new one at any time. - Verwijder huidig wachtwoord. + Verwijder huidig wachtwoord. Een nieuwe kan altijd worden ingevoerd. If you enable this option, a passcode must be entered after every resume event of your Zaurus. - Als deze optie gebruikt wordt, moet iedere keer dat dit apparaat ingeschakeld wordt een wachtwoord ingevoerd worden. + Als deze optie gebruikt wordt, moet iedere keer dat dit apparaat ingeschakeld wordt een wachtwoord ingevoerd worden. If you select this option, opie-login will automagically log you in with the user you have selected in the drop-down list. For the Zaurus 5x00 this is always the user "root". - Als deze optie gebruikt wordt, zal opie-login automagisch voor u inloggen als de gebruiker die geselecteerd is in de lijst hieronder. + Als deze optie gebruikt wordt, zal opie-login automagisch voor u inloggen als de gebruiker die geselecteerd is in de lijst hieronder. Voor de Zaurus 5x00 is dit altijd "root". @@ -185,7 +348,7 @@ Voor de Zaurus 5x00 is dit altijd "root". (if enabled above). You can only select an actually configured user. - Op deze lijst kunt u de gebruiker voor auto-login selecteren + Op deze lijst kunt u de gebruiker voor auto-login selecteren (als deze optie aanstaat) Alleen een geconfigureerd gebruiker kan geselecteerd worden. @@ -214,7 +377,7 @@ Bij twifel tijdelijk "Iedere" gebruiken. Delete Entry - Verwijder invoer + Verwijder invoer Delete the selected net range from the list @@ -223,7 +386,7 @@ If you press this button, the currently selected net range will be deleted from If you hit this button in error, the button "Restore Defaults" will restore the list to the state it has been when you initially booted your Zaurus. - Verwijder het net-bereik uit de lijst + Verwijder het net-bereik uit de lijst Als deze knop gebruikt wordt, wordt het huidige net-bereik gewist uit de lijst met net-bereiken. @@ -232,45 +395,48 @@ worden teruggezet met de knop "Herstel standaardinstelling". Restore Defaults - Herstel standaardinstelling + Herstel standaardinstelling This button will restore the list of net ranges to the defaults. Beware that all manually entered net ranges will be lost! - Deze knop zal de lijst met net-bereiken terugbrengen + Deze knop zal de lijst met net-bereiken terugbrengen naar zijn standaardinstelling. Let erop dat daarmee al uw ingevulde net-bereiken zullen worden gewist! Select your sync software - Kies de synchronisatiesoftware + Kies de synchronisatiesoftware IntelliSync - IntelliSync + IntelliSync Qtopia 1.7 - Qtopia 1.7 + Qtopia 1.7 Opie 1.0 - Opie 1.0 + Opie 1.0 + + + SyncBase - Alter the Sync Protocol to tweak for the different devices. - IntelliSync will disable the password check but you'll be prompted to accept the connection. - Opie1.0 will be compatible with QtopiaDesktop, MultiSync and KitchenSync - Qtopia1.7 will alter the way data is send to the client and will not work with older clients. - - Verander het Sync protocol om aan te sluiten op de verschillende mogelijkheden. - IntelliSync zal de wachtwoordcontrole uitschakelen, maar er zal wel worden gevraagd om bevestiging van de verbinding. - Opie1.0 moet worden gebruit voor QtopiaDesktop, MultiSync en KitchenSync - Qtopia1.7 heeft de wijze van dataverzending veranderd, en zal dus niet werken met oudere versies. - + SyncBase + + + + Sync + Sync + + + Accept sync from network: + Accepteer sync van netwerk: Select a net-range or enter a new one. @@ -286,6 +452,54 @@ If unsure, select "Any". + Delete Entry + Verwijder invoer + + + Delete the selected net range from the list + +If you press this button, the currently selected net range will be deleted from the list of net ranges. + +If you hit this button in error, the button "Restore Defaults" will restore +the list to the state it has been when you initially booted your Zaurus. + Verwijder het net-bereik uit de lijst + +Als deze knop gebruikt wordt, wordt het huidige net-bereik gewist uit de lijst met net-bereiken. + +Als deze knop per ongeluk gebruikt wordt, kunnen de standaardinstellingen +worden teruggezet met de knop "Herstel standaardinstelling". + + + Restore Defaults + Herstel standaardinstelling + + + This button will restore the list of net ranges +to the defaults. + +Beware that all manually entered net ranges will be lost! + Deze knop zal de lijst met net-bereiken terugbrengen +naar zijn standaardinstelling. + +Let erop dat daarmee al uw ingevulde net-bereiken zullen worden gewist! + + + Select your sync software + Kies de synchronisatiesoftware + + + Qtopia 1.7 + Qtopia 1.7 + + + Opie 1.0 + Opie 1.0 + + + IntelliSync + IntelliSync + + Alter the Sync Protocol to tweak for the different devices. IntelliSync will disable the password check but you'll be prompted to accept the connection. Opie1.0 will be compatible with QtopiaDesktop, MultiSync and KitchenSync diff --git a/i18n/no/security.ts b/i18n/no/security.ts index 9dbe05b..4f105ad 100644 --- a/i18n/no/security.ts +++ b/i18n/no/security.ts @@ -1,41 +1,68 @@ - Security + LoginBase - Set passcode + LoginBase - Change passcode + Login - Enter passcode + Login Automatically - Passcode incorrect + If you select this option, opie-login will automagically log you in with the user you have selected in the drop-down list. + +For the Zaurus 5x00 this is always the user "root". - The passcode entered is incorrect. -Access denied + This drop-down list allows you to select the user for auto-login +(if enabled above). + +You can only select an actually configured user. + + + MultiauthConfig - Any + Security configuration - None + Load which plugins in what order: + + + + Check a checkbox to activate/deactivate a plugin or use the arrow buttons on the right to change the order they will appear in - Enter new passcode + Move Up - Re-enter new passcode + Move Down + + + + plugins + + + + Authentication + + + + Login + + + + Sync @@ -78,75 +105,76 @@ Access denied 1.0.0.0/8 - - - SecurityBase - Security Settings + Any - Change passcode + None + + + MultiauthGeneralConfig - Clear passcode + When to lock Opie - Require pass code at power-on + on Opie start - Sync + on Opie resume - Accept sync from network: + Multiple plugins authentication - <P>Pass code protection provides a minimal level of protection from casual access to this device. + Required successes - Passcode + Debug options - Login + Don't protect this config screen - Login Automatically + Show explanatory screens - This button will let you change the security passcode. - -Note: This is *not* the sync password. + Allow to bypass authentication - Delete the current passcode. -You can enter a new one at any time. + Note: the third option implies the second one + + + Security + + + SecurityBase + + + SyncBase - If you enable this option, a passcode must be entered after every resume event of your Zaurus. + SyncBase - If you select this option, opie-login will automagically log you in with the user you have selected in the drop-down list. - -For the Zaurus 5x00 this is always the user "root". + Sync - This drop-down list allows you to select the user for auto-login -(if enabled above). - -You can only select an actually configured user. + Accept sync from network: @@ -191,15 +219,15 @@ Beware that all manually entered net ranges will be lost! - IntelliSync + Qtopia 1.7 - Qtopia 1.7 + Opie 1.0 - Opie 1.0 + IntelliSync diff --git a/i18n/pl/security.ts b/i18n/pl/security.ts index 8bb2f3c..525ccc7 100644 --- a/i18n/pl/security.ts +++ b/i18n/pl/security.ts @@ -1,110 +1,273 @@ + LoginBase + + LoginBase + + + + Login + Login + + + Login Automatically + Loguj automatycznie + + + If you select this option, opie-login will automagically log you in with the user you have selected in the drop-down list. + +For the Zaurus 5x00 this is always the user "root". + Jeśli wybierzesz tą opcję, będziesz automatycznie logowany jako użytkownik, którego wybrałeś z listy rozwijanej. + +Dla Zaurusa 5x00 jest to zawsze użytkownik "root". + + + This drop-down list allows you to select the user for auto-login +(if enabled above). + +You can only select an actually configured user. + Ta lista rozwijana pozwala na wybór automatycznie logowanego użytkownika +(jeśli opcja jest włączona powyżej). + +Możesz wybrać tylko skonfigurowanego użytkownika. + + + + MultiauthConfig + + Security configuration + + + + Load which plugins in what order: + + + + Check a checkbox to activate/deactivate a plugin or use the arrow buttons on the right to change the order they will appear in + + + + Move Up + + + + Move Down + + + + plugins + + + + Authentication + + + + Login + Login + + + Sync + Synchronizuj + + + Attention + Uwaga + + + <p>All user-defined net ranges will be lost. + <p>Wszystkie zakresy użytkownika będę stracone. + + + Cancel + Anuluj + + + Ok + OK + + + 192.168.129.0/24 + 192.168.129.0/24 + + + 192.168.1.0/24 + 192.168.1.0/24 + + + 192.168.0.0/16 + 192.168.0.0/16 + + + 172.16.0.0/12 + 172.16.0.0/12 + + + 10.0.0.0/8 + 10.0.0.0/8 + + + 1.0.0.0/8 + 1.0.0.0/8 + + + Any + + + + None + + + + + MultiauthGeneralConfig + + When to lock Opie + + + + on Opie start + + + + on Opie resume + + + + Multiple plugins authentication + + + + Required successes + + + + Debug options + + + + Don't protect this config screen + + + + Show explanatory screens + + + + Allow to bypass authentication + + + + Note: the third option implies the second one + + + + Security Set passcode - Ustaw hasło + Ustaw hasło Change passcode - Zmień hasło + Zmień hasło Enter passcode - Podaj hasło + Podaj hasło Passcode incorrect - Błędne hasło + Błędne hasło The passcode entered is incorrect. Access denied - Podane hasło jest nieprawidłowe. + Podane hasło jest nieprawidłowe. Dostęp zabroniony Any - Wszystkie + Wszystkie None - Żadne + Żadne Enter new passcode - Wpisz nowe hasło + Wpisz nowe hasło Re-enter new passcode - Powtórz nowe hasło + Powtórz nowe hasło Attention - Uwaga + Uwaga <p>All user-defined net ranges will be lost. - <p>Wszystkie zakresy użytkownika będę stracone. + <p>Wszystkie zakresy użytkownika będę stracone. Cancel - Anuluj + Anuluj Ok - OK + OK 192.168.129.0/24 - 192.168.129.0/24 + 192.168.129.0/24 192.168.1.0/24 - 192.168.1.0/24 + 192.168.1.0/24 192.168.0.0/16 - 192.168.0.0/16 + 192.168.0.0/16 172.16.0.0/12 - 172.16.0.0/12 + 172.16.0.0/12 10.0.0.0/8 - 10.0.0.0/8 + 10.0.0.0/8 1.0.0.0/8 - 1.0.0.0/8 + 1.0.0.0/8 SecurityBase Security Settings - Ustawienia bezpieczeństwa + Ustawienia bezpieczeństwa Change passcode - Zmień hasło + Zmień hasło Clear passcode - Wyczyść hasło + Wyczyść hasło Require pass code at power-on - Wymagaj hasła po uruchomieniu + Wymagaj hasła po uruchomieniu Sync - Synchronizuj + Synchronizuj Accept sync from network: - Akceptuj synchronizację z sieci: + Akceptuj synchronizację z sieci: 192.168.0.0/16 @@ -128,7 +291,7 @@ Dostęp zabroniony <P>Pass code protection provides a minimal level of protection from casual access to this device. - <P>Ochrona hasłem jest podstawowym zabezpieczeniem przed przypadkowym dostępem do tego urządzenia. + <P>Ochrona hasłem jest podstawowym zabezpieczeniem przed przypadkowym dostępem do tego urządzenia. 192.168.129.0/24 (default) @@ -144,39 +307,39 @@ Dostęp zabroniony Passcode - Hasło + Hasło Login - Login + Login Login Automatically - Loguj automatycznie + Loguj automatycznie This button will let you change the security passcode. Note: This is *not* the sync password. - Ten przycisk służy do zmiany hasła. + Ten przycisk służy do zmiany hasła. Uwaga: To *nie* jest hasło synchronizacji. Delete the current passcode. You can enter a new one at any time. - Usuń aktualne hasło. + Usuń aktualne hasło. W dowolnej chwili możesz podać nowe. If you enable this option, a passcode must be entered after every resume event of your Zaurus. - Jeśli włączysz tą opcję, będzie trzeba podawać hasło po każdym rozbudzeniu Zaurusa. + Jeśli włączysz tą opcję, będzie trzeba podawać hasło po każdym rozbudzeniu Zaurusa. If you select this option, opie-login will automagically log you in with the user you have selected in the drop-down list. For the Zaurus 5x00 this is always the user "root". - Jeśli wybierzesz tą opcję, będziesz automatycznie logowany jako użytkownik, którego wybrałeś z listy rozwijanej. + Jeśli wybierzesz tą opcję, będziesz automatycznie logowany jako użytkownik, którego wybrałeś z listy rozwijanej. Dla Zaurusa 5x00 jest to zawsze użytkownik "root". @@ -185,7 +348,7 @@ Dla Zaurusa 5x00 jest to zawsze użytkownik "root". (if enabled above). You can only select an actually configured user. - Ta lista rozwijana pozwala na wybór automatycznie logowanego użytkownika + Ta lista rozwijana pozwala na wybór automatycznie logowanego użytkownika (jeśli opcja jest włączona powyżej). Możesz wybrać tylko skonfigurowanego użytkownika. @@ -201,7 +364,7 @@ The entry "All" will allow *any* IP to connect. The entry "None" will *deny* any connection. If unsure, select "Any". - Wybierz zakres sieciowy lub podaj nowy. + Wybierz zakres sieciowy lub podaj nowy. Ta lista rozwijana służy do wyboru zakresu adresów, z których można łączyć się z Zaurusem. @@ -214,7 +377,7 @@ Jeśli nie jesteś pewien co wybrać, wybierz "Wszystkie". Delete Entry - Usuń wpis + Usuń wpis Delete the selected net range from the list @@ -223,7 +386,7 @@ If you press this button, the currently selected net range will be deleted from If you hit this button in error, the button "Restore Defaults" will restore the list to the state it has been when you initially booted your Zaurus. - Usuń wybrany zakres sieciowy z listy + Usuń wybrany zakres sieciowy z listy Jeśli wciśniesz ten przycisk, aktualnie wybrany zakres sieciowy zostanie usunięty z listy zakresów sieciowych. @@ -232,45 +395,118 @@ przywróci listę do stanu w jakim była przy pierwszym starcie Zaurusa. Restore Defaults - Przywróć domyślne + Przywróć domyślne This button will restore the list of net ranges to the defaults. Beware that all manually entered net ranges will be lost! - Ten przycisk przywróci listę zakresów sieciowych + Ten przycisk przywróci listę zakresów sieciowych do stanu domyślnego. Uwaga, wszystkie ręcznie wprowadzone zakresy zostaną usunięte! Select your sync software - Wybierz oprogramowanie do synchronizacji + Wybierz oprogramowanie do synchronizacji IntelliSync - IntelliSync + IntelliSync Qtopia 1.7 - Qtopia 1.7 + Qtopia 1.7 Opie 1.0 - Opie 1.0 + Opie 1.0 + + + SyncBase - Alter the Sync Protocol to tweak for the different devices. - IntelliSync will disable the password check but you'll be prompted to accept the connection. - Opie1.0 will be compatible with QtopiaDesktop, MultiSync and KitchenSync - Qtopia1.7 will alter the way data is send to the client and will not work with older clients. - - Zmień protokół synchronizacji aby go dostosować do różnych urządzeń. - IntelliSync wyłączy sprawdzanie hasła, ale zostaniesz poproszony o akceptację połączenia. - Opie1.0 będzie kompatybilne z QtopiaDesktop, MultiSync i KitchenSync. - Qtopia1.7 zmieni sposób wysyłania danych do klienta i nie będzie działać ze starszymi klientami. - + SyncBase + + + + Sync + Synchronizuj + + + Accept sync from network: + Akceptuj synchronizację z sieci: + + + Select a net-range or enter a new one. + +This drop-down list lets you select a net range which is allowed to connect to your Zaurus. + +For example, a net range of 192.168.1.0/24 will allow any machine with an IP between 192.168.1.1 and 192.168.1.254 to connect to (and sync with) your Zaurus. + +The entry "All" will allow *any* IP to connect. +The entry "None" will *deny* any connection. + +If unsure, select "Any". + Wybierz zakres sieciowy lub podaj nowy. + +Ta lista rozwijana służy do wyboru zakresu adresów, z których można łączyć się z Zaurusem. + +Na przykład zakres 192.168.1.0/24 pozwala na połączenie (i synchronizację) każdej maszynie z IP pomiędzy 192.168.1.1 i 192.168.1.254. + +"Wszystkie" pozwoli na łączenie z *każdego* IP. +"Żadne" odmówi *każdemu* połączeniu. + +Jeśli nie jesteś pewien co wybrać, wybierz "Wszystkie". + + + Delete Entry + Usuń wpis + + + Delete the selected net range from the list + +If you press this button, the currently selected net range will be deleted from the list of net ranges. + +If you hit this button in error, the button "Restore Defaults" will restore +the list to the state it has been when you initially booted your Zaurus. + Usuń wybrany zakres sieciowy z listy + +Jeśli wciśniesz ten przycisk, aktualnie wybrany zakres sieciowy zostanie usunięty z listy zakresów sieciowych. + +Jeśli wciśniesz ten przycisk przez pomyłkę, to przycisk "Przywróć domyślne" +przywróci listę do stanu w jakim była przy pierwszym starcie Zaurusa. + + + Restore Defaults + Przywróć domyślne + + + This button will restore the list of net ranges +to the defaults. + +Beware that all manually entered net ranges will be lost! + Ten przycisk przywróci listę zakresów sieciowych +do stanu domyślnego. + +Uwaga, wszystkie ręcznie wprowadzone zakresy zostaną usunięte! + + + Select your sync software + Wybierz oprogramowanie do synchronizacji + + + Qtopia 1.7 + Qtopia 1.7 + + + Opie 1.0 + Opie 1.0 + + + IntelliSync + IntelliSync Alter the Sync Protocol to tweak for the different devices. diff --git a/i18n/pt/security.ts b/i18n/pt/security.ts index 3b2aa92..a2b43aa 100644 --- a/i18n/pt/security.ts +++ b/i18n/pt/security.ts @@ -1,43 +1,69 @@ - Security + LoginBase - Set passcode - Mudar Chave + LoginBase + - Change passcode - Mudar chave + Login + Entrar - Enter passcode - Introduza chave + Login Automatically + Entrar Automaticamente - Passcode incorrect - Chave incorrecta + If you select this option, opie-login will automagically log you in with the user you have selected in the drop-down list. + +For the Zaurus 5x00 this is always the user "root". + - The passcode entered is incorrect. -Access denied - A chave introduzida está incorrecta. -Acesso negado + This drop-down list allows you to select the user for auto-login +(if enabled above). + +You can only select an actually configured user. + + + + + MultiauthConfig + + Security configuration + - Any - Qualquer + Load which plugins in what order: + - None - Nenhum + Check a checkbox to activate/deactivate a plugin or use the arrow buttons on the right to change the order they will appear in + - Enter new passcode - Introduza nova chave + Move Up + - Re-enter new passcode - Reintroduza a chave + Move Down + + + + plugins + + + + Authentication + + + + Login + Entrar + + + Sync + Sincronizar Attention @@ -79,32 +105,148 @@ Acesso negado 1.0.0.0/8 1.0.0.0/8 + + Any + Qualquer + + + None + + + + + MultiauthGeneralConfig + + When to lock Opie + + + + on Opie start + + + + on Opie resume + + + + Multiple plugins authentication + + + + Required successes + + + + Debug options + + + + Don't protect this config screen + + + + Show explanatory screens + + + + Allow to bypass authentication + + + + Note: the third option implies the second one + + + + + Security + + Set passcode + Mudar Chave + + + Change passcode + Mudar chave + + + Enter passcode + Introduza chave + + + Passcode incorrect + Chave incorrecta + + + The passcode entered is incorrect. +Access denied + A chave introduzida está incorrecta. +Acesso negado + + + Any + Qualquer + + + None + Nenhum + + + Enter new passcode + Introduza nova chave + + + Re-enter new passcode + Reintroduza a chave + + + 192.168.129.0/24 + 192.168.129.0/24 + + + 192.168.1.0/24 + 192.168.1.0/24 + + + 192.168.0.0/16 + 192.168.0.0/16 + + + 172.16.0.0/12 + 172.16.0.0/12 + + + 10.0.0.0/8 + 10.0.0.0/8 + + + 1.0.0.0/8 + 1.0.0.0/8 + SecurityBase Security Settings - Configurações de Segurança + Configurações de Segurança Change passcode - Mudar chave + Mudar chave Clear passcode - Limpar chave + Limpar chave Require pass code at power-on - Pedir chave ao ligar + Pedir chave ao ligar Sync - Sincronizar + Sincronizar Accept sync from network: - Aceitar sincronização da rede: + Aceitar sincronização da rede: 192.168.129.0/24 (default) @@ -136,7 +278,7 @@ Acesso negado <P>Pass code protection provides a minimal level of protection from casual access to this device. - <p>O uso de chave permite uma protecção mínima contra acessos pontuais ao dispositivo. + <p>O uso de chave permite uma protecção mínima contra acessos pontuais ao dispositivo. 1.0.0.0/8 @@ -144,43 +286,30 @@ Acesso negado Passcode - Palavra Chave + Palavra Chave Login - Entrar + Entrar Login Automatically - Entrar Automaticamente - - - This button will let you change the security passcode. - -Note: This is *not* the sync password. - - - - Delete the current passcode. -You can enter a new one at any time. - + Entrar Automaticamente + + + SyncBase - If you enable this option, a passcode must be entered after every resume event of your Zaurus. + SyncBase - If you select this option, opie-login will automagically log you in with the user you have selected in the drop-down list. - -For the Zaurus 5x00 this is always the user "root". - + Sync + Sincronizar - This drop-down list allows you to select the user for auto-login -(if enabled above). - -You can only select an actually configured user. - + Accept sync from network: + Aceitar sincronização da rede: Select a net-range or enter a new one. @@ -224,15 +353,15 @@ Beware that all manually entered net ranges will be lost! - IntelliSync + Qtopia 1.7 - Qtopia 1.7 + Opie 1.0 - Opie 1.0 + IntelliSync diff --git a/i18n/pt_BR/security.ts b/i18n/pt_BR/security.ts index f863d1d..e7b589f 100644 --- a/i18n/pt_BR/security.ts +++ b/i18n/pt_BR/security.ts @@ -1,46 +1,72 @@ iso8859-1 - Security + LoginBase - Any - Qualquer + LoginBase + - None - Nenhum + Login + - Change passcode - Mudar senha + Login Automatically + - Passcode incorrect - Senha incorreta + If you select this option, opie-login will automagically log you in with the user you have selected in the drop-down list. + +For the Zaurus 5x00 this is always the user "root". + - Enter passcode - Entre a senha + This drop-down list allows you to select the user for auto-login +(if enabled above). + +You can only select an actually configured user. + + + + MultiauthConfig - Set passcode - Ajustar senha + Security configuration + - The passcode entered is incorrect. -Access denied - A senha inserida está incorreta. -Acesso negado + Load which plugins in what order: + + + + Check a checkbox to activate/deactivate a plugin or use the arrow buttons on the right to change the order they will appear in + + + + Move Up + + + + Move Down + + + + plugins + - Enter new passcode + Authentication - Re-enter new passcode + Login + Sync + Sincronizar + + Attention @@ -80,9 +106,60 @@ Acesso negado 1.0.0.0/8 + + Any + Qualquer + + + None + Nenhum + - SecurityBase + MultiauthGeneralConfig + + When to lock Opie + + + + on Opie start + + + + on Opie resume + + + + Multiple plugins authentication + + + + Required successes + + + + Debug options + + + + Don't protect this config screen + + + + Show explanatory screens + + + + Allow to bypass authentication + + + + Note: the third option implies the second one + + + + + Security Any Qualquer @@ -92,78 +169,86 @@ Acesso negado Nenhum - Sync - Sincronizar + Change passcode + Mudar senha - Change passcode - Mudar a senha + Passcode incorrect + Senha incorreta - Accept sync from network: - Aceitar sincronização da rede: + Enter passcode + Entre a senha - Security Settings - Ajustes + Set passcode + Ajustar senha - Clear passcode - Limpar a senha + The passcode entered is incorrect. +Access denied + A senha inserida está incorreta. +Acesso negado + + + SecurityBase - Require pass code at power-on - Requisitar senha ao ligar + Any + Qualquer - <P>Pass code protection provides a minimal level of protection from casual access to this device. - <P>A senha provê um nível mínimo de segurança quantra o acesso casual a este dispositivo. + None + Nenhum - 192.168.129.0/24 (default) - 192.168.129.0/24 (padrão) + Sync + Sincronizar - Passcode - + Change passcode + Mudar a senha - Login - + Accept sync from network: + Aceitar sincronização da rede: - Login Automatically - + Security Settings + Ajustes - This button will let you change the security passcode. - -Note: This is *not* the sync password. - + Clear passcode + Limpar a senha - Delete the current passcode. -You can enter a new one at any time. - + Require pass code at power-on + Requisitar senha ao ligar - If you enable this option, a passcode must be entered after every resume event of your Zaurus. - + <P>Pass code protection provides a minimal level of protection from casual access to this device. + <P>A senha provê um nível mínimo de segurança quantra o acesso casual a este dispositivo. - If you select this option, opie-login will automagically log you in with the user you have selected in the drop-down list. - -For the Zaurus 5x00 this is always the user "root". - + 192.168.129.0/24 (default) + 192.168.129.0/24 (padrão) + + + SyncBase - This drop-down list allows you to select the user for auto-login -(if enabled above). - -You can only select an actually configured user. + SyncBase + Sync + Sincronizar + + + Accept sync from network: + Aceitar sincronização da rede: + + Select a net-range or enter a new one. This drop-down list lets you select a net range which is allowed to connect to your Zaurus. @@ -205,15 +290,15 @@ Beware that all manually entered net ranges will be lost! - IntelliSync + Qtopia 1.7 - Qtopia 1.7 + Opie 1.0 - Opie 1.0 + IntelliSync diff --git a/i18n/ru/security.ts b/i18n/ru/security.ts index 0f04883..edc3616 100644 --- a/i18n/ru/security.ts +++ b/i18n/ru/security.ts @@ -1,83 +1,246 @@ + LoginBase + + LoginBase + + + + Login + Войти + + + Login Automatically + Входить автоматически + + + If you select this option, opie-login will automagically log you in with the user you have selected in the drop-down list. + +For the Zaurus 5x00 this is always the user "root". + Если вы выберите эту опцию, opie-login автоматически войдет в систему под выбранным из списка пользователем. + +На Zaurus 5x00 это всегда пользователь "root". + + + This drop-down list allows you to select the user for auto-login +(if enabled above). + +You can only select an actually configured user. + Этот список позволит выбрать пользователя для авто-входа +(если разрешен). + +Вы можете выбрать только уже настроенное имя пользователя. + + + + MultiauthConfig + + Security configuration + + + + Load which plugins in what order: + + + + Check a checkbox to activate/deactivate a plugin or use the arrow buttons on the right to change the order they will appear in + + + + Move Up + + + + Move Down + + + + plugins + + + + Authentication + + + + Login + Войти + + + Sync + Синхр. + + + Attention + Внимание + + + <p>All user-defined net ranges will be lost. + <p>Все заданные пользователем участки будут потеряны. + + + Cancel + Отмена + + + Ok + Да + + + 192.168.129.0/24 + 192.168.129.0/24 + + + 192.168.1.0/24 + 192.168.1.0/24 + + + 192.168.0.0/16 + 192.168.0.0/16 + + + 172.16.0.0/12 + 172.16.0.0/12 + + + 10.0.0.0/8 + 10.0.0.0/8 + + + 1.0.0.0/8 + 1.0.0.0/8 + + + Any + Любой + + + None + Ни одного + + + + MultiauthGeneralConfig + + When to lock Opie + + + + on Opie start + + + + on Opie resume + + + + Multiple plugins authentication + + + + Required successes + + + + Debug options + + + + Don't protect this config screen + + + + Show explanatory screens + + + + Allow to bypass authentication + + + + Note: the third option implies the second one + + + + Security Set passcode - Уст. пароль + Уст. пароль Change passcode - Изменить пароль + Изменить пароль Enter passcode - Введите пароль + Введите пароль Passcode incorrect - Неверный пароль + Неверный пароль The passcode entered is incorrect. Access denied - Введеный пароль неверен. + Введеный пароль неверен. Доступ запрещен Any - Любой + Любой None - Ни одного + Ни одного Enter new passcode - Введите новый пароль + Введите новый пароль Re-enter new passcode - Введите пароль еще раз + Введите пароль еще раз Attention - Внимание + Внимание <p>All user-defined net ranges will be lost. - <p>Все заданные пользователем участки будут потеряны. + <p>Все заданные пользователем участки будут потеряны. Cancel - Отмена + Отмена Ok - Да + Да 192.168.129.0/24 - 192.168.129.0/24 + 192.168.129.0/24 192.168.1.0/24 - 192.168.1.0/24 + 192.168.1.0/24 192.168.0.0/16 - 192.168.0.0/16 + 192.168.0.0/16 172.16.0.0/12 - 172.16.0.0/12 + 172.16.0.0/12 10.0.0.0/8 - 10.0.0.0/8 + 10.0.0.0/8 1.0.0.0/8 - 1.0.0.0/8 + 1.0.0.0/8 WARNING @@ -92,67 +255,67 @@ Access denied SecurityBase Security Settings - Настройки безопасности + Настройки безопасности Change passcode - Изменить пароль + Изменить пароль Clear passcode - Сбросить пароль + Сбросить пароль Require pass code at power-on - Требовать пароль при включении + Требовать пароль при включении Sync - Синхр. + Синхр. Accept sync from network: - Принимать запросы из сети: + Принимать запросы из сети: <P>Pass code protection provides a minimal level of protection from casual access to this device. - <P>Пароль предоставляет минимальный уровень защиты от случайного доступа к устройству. + <P>Пароль предоставляет минимальный уровень защиты от случайного доступа к устройству. Passcode - Пароль + Пароль Login - Войти + Войти Login Automatically - Входить автоматически + Входить автоматически This button will let you change the security passcode. Note: This is *not* the sync password. - Эта кнопка позволит вам изменить пароль. + Эта кнопка позволит вам изменить пароль. Заметьте: это НЕ пароль для синхронизации. Delete the current passcode. You can enter a new one at any time. - Удалить текущий пароль. + Удалить текущий пароль. Вы всегда сможете ввести новый. If you enable this option, a passcode must be entered after every resume event of your Zaurus. - Если вы разрешите эту опцию, нужно будет вводить пароль при каждом включении КПК. + Если вы разрешите эту опцию, нужно будет вводить пароль при каждом включении КПК. If you select this option, opie-login will automagically log you in with the user you have selected in the drop-down list. For the Zaurus 5x00 this is always the user "root". - Если вы выберите эту опцию, opie-login автоматически войдет в систему под выбранным из списка пользователем. + Если вы выберите эту опцию, opie-login автоматически войдет в систему под выбранным из списка пользователем. На Zaurus 5x00 это всегда пользователь "root". @@ -161,7 +324,7 @@ For the Zaurus 5x00 this is always the user "root". (if enabled above). You can only select an actually configured user. - Этот список позволит выбрать пользователя для авто-входа + Этот список позволит выбрать пользователя для авто-входа (если разрешен). Вы можете выбрать только уже настроенное имя пользователя. @@ -177,7 +340,7 @@ The entry "All" will allow *any* IP to connect. The entry "None" will *deny* any connection. If unsure, select "Any". - Выберите или введите новый участок сети. + Выберите или введите новый участок сети. Этот список позволяет выбрать участок сети из которого можно подключится к вашему КПК. @@ -190,7 +353,7 @@ If unsure, select "Any". Delete Entry - Удалить запись + Удалить запись Delete the selected net range from the list @@ -199,7 +362,7 @@ If you press this button, the currently selected net range will be deleted from If you hit this button in error, the button "Restore Defaults" will restore the list to the state it has been when you initially booted your Zaurus. - Удалить выбранный участок из списка + Удалить выбранный участок из списка Если вы нажмете эту кнопку, выбранный участок будет удален из списка. @@ -208,21 +371,21 @@ the list to the state it has been when you initially booted your Zaurus. Restore Defaults - По умолчанию + По умолчанию This button will restore the list of net ranges to the defaults. Beware that all manually entered net ranges will be lost! - Эта кнопка восстановит список участков сети + Эта кнопка восстановит список участков сети по умолчанию. Учтите что вручную введенные участки будут потеряны! Select your sync software - Выберите программу + Выберите программу QTopia @@ -230,7 +393,7 @@ Beware that all manually entered net ranges will be lost! IntelliSync - IntelliSync + IntelliSync This option changes the login behaviour of the internal FTP server. @@ -246,11 +409,11 @@ The default is Qtopia. It will let you log in with username "root" and Qtopia 1.7 - Qtopia 1.7 + Qtopia 1.7 Opie 1.0 - Opie 1.0 + Opie 1.0 Both @@ -262,11 +425,104 @@ The default is Qtopia. It will let you log in with username "root" and Opie1.0 will be compatible with QtopiaDesktop, MultiSync and KitchenSync Qtopia1.7 will alter the way data is send to the client and will not work with older clients. - Изменить протокол синхронизации для разных устройств. + Изменить протокол синхронизации для разных устройств. IntelliSync запретит пароль но будет каждый раз спрашивать разрешение для соединения. Opie1.0 совместим с QtopiaDesktop, MultiSync и KitchenSync Qtopia1.7 изменит способ отправки данных и несовместим со старыми клиентами. + + SyncBase + + SyncBase + + + + Sync + Синхр. + + + Accept sync from network: + Принимать запросы из сети: + + + Select a net-range or enter a new one. + +This drop-down list lets you select a net range which is allowed to connect to your Zaurus. + +For example, a net range of 192.168.1.0/24 will allow any machine with an IP between 192.168.1.1 and 192.168.1.254 to connect to (and sync with) your Zaurus. + +The entry "All" will allow *any* IP to connect. +The entry "None" will *deny* any connection. + +If unsure, select "Any". + Выберите или введите новый участок сети. + +Этот список позволяет выбрать участок сети из которого можно подключится к вашему КПК. + +Например, участок сети 192.168.1.0/24 позволит любой машине с IP между 192.168.1.1 и 192.168.1.254 подключаться к (и синхронизироваться с) вашим КПК. + +Запись "Все" позволит подключиться *любому* IP. +Запись "Ни одного" *запретит* все соединения. + +Если неуверены, выберите "Все". + + + Delete Entry + Удалить запись + + + Delete the selected net range from the list + +If you press this button, the currently selected net range will be deleted from the list of net ranges. + +If you hit this button in error, the button "Restore Defaults" will restore +the list to the state it has been when you initially booted your Zaurus. + Удалить выбранный участок из списка + +Если вы нажмете эту кнопку, выбранный участок будет удален из списка. + +Если вы нажали эту кнопку случайно, кнопка "По умолчанию" +восстановит список в том виде, когда вы первый раз запустили ваш КПК. + + + Restore Defaults + По умолчанию + + + This button will restore the list of net ranges +to the defaults. + +Beware that all manually entered net ranges will be lost! + Эта кнопка восстановит список участков сети +по умолчанию. + +Учтите что вручную введенные участки будут потеряны! + + + Select your sync software + Выберите программу + + + Qtopia 1.7 + Qtopia 1.7 + + + Opie 1.0 + Opie 1.0 + + + IntelliSync + IntelliSync + + + Alter the Sync Protocol to tweak for the different devices. + IntelliSync will disable the password check but you'll be prompted to accept the connection. + Opie1.0 will be compatible with QtopiaDesktop, MultiSync and KitchenSync + Qtopia1.7 will alter the way data is send to the client and will not work with older clients. + + + + diff --git a/i18n/sl/security.ts b/i18n/sl/security.ts index 1c23c6b..5272fc3 100644 --- a/i18n/sl/security.ts +++ b/i18n/sl/security.ts @@ -1,45 +1,71 @@ - Security + LoginBase - Set passcode - Nastavi kodo + LoginBase + - Change passcode - Zamenjaj kodo + Login + - Enter passcode - Vpišite kodo + Login Automatically + - Passcode incorrect - Koda ni pravilna + If you select this option, opie-login will automagically log you in with the user you have selected in the drop-down list. + +For the Zaurus 5x00 this is always the user "root". + - The passcode entered is incorrect. -Access denied - Vpisana koda ni pravilna. -Dostop zavrnjen + This drop-down list allows you to select the user for auto-login +(if enabled above). + +You can only select an actually configured user. + + + + MultiauthConfig - Any - Karkoli + Security configuration + - None - Brez + Load which plugins in what order: + - Enter new passcode + Check a checkbox to activate/deactivate a plugin or use the arrow buttons on the right to change the order they will appear in - Re-enter new passcode + Move Up + Move Down + + + + plugins + + + + Authentication + + + + Login + + + + Sync + Sinhroniziraj + + Attention @@ -79,32 +105,140 @@ Dostop zavrnjen 1.0.0.0/8 1.0.0.0/8 + + Any + Karkoli + + + None + + + + + MultiauthGeneralConfig + + When to lock Opie + + + + on Opie start + + + + on Opie resume + + + + Multiple plugins authentication + + + + Required successes + + + + Debug options + + + + Don't protect this config screen + + + + Show explanatory screens + + + + Allow to bypass authentication + + + + Note: the third option implies the second one + + + + + Security + + Set passcode + Nastavi kodo + + + Change passcode + Zamenjaj kodo + + + Enter passcode + Vpišite kodo + + + Passcode incorrect + Koda ni pravilna + + + The passcode entered is incorrect. +Access denied + Vpisana koda ni pravilna. +Dostop zavrnjen + + + Any + Karkoli + + + None + Brez + + + 192.168.129.0/24 + 192.168.129.0/24 + + + 192.168.1.0/24 + 192.168.1.0/24 + + + 192.168.0.0/16 + 192.168.0.0/16 + + + 172.16.0.0/12 + 172.16.0.0/12 + + + 10.0.0.0/8 + 10.0.0.0/8 + + + 1.0.0.0/8 + 1.0.0.0/8 + SecurityBase Security Settings - Varnostne nastavitve + Varnostne nastavitve Change passcode - Zamenjaj kodo + Zamenjaj kodo Clear passcode - Zbriši kodo + Zbriši kodo Require pass code at power-on - Potrebna koda pri vklopu + Potrebna koda pri vklopu Sync - Sinhroniziraj + Sinhroniziraj Accept sync from network: - Sperjmi sinhronizacijo iz mreže: + Sperjmi sinhronizacijo iz mreže: 192.168.0.0/16 @@ -128,7 +262,7 @@ Dostop zavrnjen <P>Pass code protection provides a minimal level of protection from casual access to this device. - <P>Koda prinaša minimalno zaščito za varovanje vaše naprave. + <P>Koda prinaša minimalno zaščito za varovanje vaše naprave. 192.168.129.0/24 (default) @@ -142,45 +276,20 @@ Dostop zavrnjen 1.0.0.0/8 1.0.0.0/8 + + + SyncBase - Passcode - - - - Login - - - - Login Automatically - - - - This button will let you change the security passcode. - -Note: This is *not* the sync password. - - - - Delete the current passcode. -You can enter a new one at any time. - - - - If you enable this option, a passcode must be entered after every resume event of your Zaurus. + SyncBase - If you select this option, opie-login will automagically log you in with the user you have selected in the drop-down list. - -For the Zaurus 5x00 this is always the user "root". - + Sync + Sinhroniziraj - This drop-down list allows you to select the user for auto-login -(if enabled above). - -You can only select an actually configured user. - + Accept sync from network: + Sperjmi sinhronizacijo iz mreže: Select a net-range or enter a new one. @@ -224,15 +333,15 @@ Beware that all manually entered net ranges will be lost! - IntelliSync + Qtopia 1.7 - Qtopia 1.7 + Opie 1.0 - Opie 1.0 + IntelliSync diff --git a/i18n/xx/security.ts b/i18n/xx/security.ts index 9f0f8fd..7d80f0f 100644 --- a/i18n/xx/security.ts +++ b/i18n/xx/security.ts @@ -1,42 +1,69 @@ - Security + LoginBase - Set passcode - FOO + LoginBase + - Change passcode - FOO + Login + - Enter passcode - FOO + Login Automatically + - Passcode incorrect - FOO + If you select this option, opie-login will automagically log you in with the user you have selected in the drop-down list. + +For the Zaurus 5x00 this is always the user "root". + - The passcode entered is incorrect. -Access denied - FOO + This drop-down list allows you to select the user for auto-login +(if enabled above). + +You can only select an actually configured user. + + + + MultiauthConfig - Any - FOO + Security configuration + - None - FOO + Load which plugins in what order: + - Enter new passcode - FOO + Check a checkbox to activate/deactivate a plugin or use the arrow buttons on the right to change the order they will appear in + - Re-enter new passcode - FOO + Move Up + + + + Move Down + + + + plugins + + + + Authentication + + + + Login + + + + Sync + FOO Attention @@ -78,32 +105,147 @@ Access denied 1.0.0.0/8 FOO + + Any + FOO + + + None + FOO + + + + MultiauthGeneralConfig + + When to lock Opie + + + + on Opie start + + + + on Opie resume + + + + Multiple plugins authentication + + + + Required successes + + + + Debug options + + + + Don't protect this config screen + + + + Show explanatory screens + + + + Allow to bypass authentication + + + + Note: the third option implies the second one + + + + + Security + + Set passcode + FOO + + + Change passcode + FOO + + + Enter passcode + FOO + + + Passcode incorrect + FOO + + + The passcode entered is incorrect. +Access denied + FOO + + + Any + FOO + + + None + FOO + + + Enter new passcode + FOO + + + Re-enter new passcode + FOO + + + 192.168.129.0/24 + FOO {192.168.129.0/24?} + + + 192.168.1.0/24 + FOO + + + 192.168.0.0/16 + FOO + + + 172.16.0.0/12 + FOO + + + 10.0.0.0/8 + FOO + + + 1.0.0.0/8 + FOO + SecurityBase Security Settings - FOO + FOO Change passcode - FOO + FOO Clear passcode - FOO + FOO Require pass code at power-on - FOO + FOO Sync - FOO + FOO Accept sync from network: - FOO + FOO 192.168.129.0/24 (default) @@ -135,51 +277,26 @@ Access denied <P>Pass code protection provides a minimal level of protection from casual access to this device. - FOO + FOO 1.0.0.0/8 FOO + + + SyncBase - Passcode - - - - Login - - - - Login Automatically - - - - This button will let you change the security passcode. - -Note: This is *not* the sync password. - - - - Delete the current passcode. -You can enter a new one at any time. - - - - If you enable this option, a passcode must be entered after every resume event of your Zaurus. + SyncBase - If you select this option, opie-login will automagically log you in with the user you have selected in the drop-down list. - -For the Zaurus 5x00 this is always the user "root". - + Sync + FOO - This drop-down list allows you to select the user for auto-login -(if enabled above). - -You can only select an actually configured user. - + Accept sync from network: + FOO Select a net-range or enter a new one. @@ -223,15 +340,15 @@ Beware that all manually entered net ranges will be lost! - IntelliSync + Qtopia 1.7 - Qtopia 1.7 + Opie 1.0 - Opie 1.0 + IntelliSync diff --git a/i18n/zh_CN/security.ts b/i18n/zh_CN/security.ts index 1530ddb..4f105ad 100644 --- a/i18n/zh_CN/security.ts +++ b/i18n/zh_CN/security.ts @@ -1,144 +1,172 @@ - Security + LoginBase - Attention + LoginBase - <p>All user-defined net ranges will be lost. + Login - Cancel + Login Automatically - Ok + If you select this option, opie-login will automagically log you in with the user you have selected in the drop-down list. + +For the Zaurus 5x00 this is always the user "root". - 192.168.129.0/24 + This drop-down list allows you to select the user for auto-login +(if enabled above). + +You can only select an actually configured user. + + + MultiauthConfig - 192.168.1.0/24 + Security configuration - 192.168.0.0/16 + Load which plugins in what order: - 172.16.0.0/12 + Check a checkbox to activate/deactivate a plugin or use the arrow buttons on the right to change the order they will appear in - 10.0.0.0/8 + Move Up - 1.0.0.0/8 + Move Down - Any + plugins - None + Authentication - Set passcode + Login - Change passcode + Sync - Enter passcode + Attention - Passcode incorrect + <p>All user-defined net ranges will be lost. - The passcode entered is incorrect. -Access denied + Cancel - Enter new passcode + Ok - Re-enter new passcode + 192.168.129.0/24 - - - SecurityBase - Security Settings + 192.168.1.0/24 - Passcode + 192.168.0.0/16 - Change passcode + 172.16.0.0/12 - This button will let you change the security passcode. - -Note: This is *not* the sync password. + 10.0.0.0/8 + + + + 1.0.0.0/8 - Clear passcode + Any - Delete the current passcode. -You can enter a new one at any time. + None + + + MultiauthGeneralConfig - Require pass code at power-on + When to lock Opie - If you enable this option, a passcode must be entered after every resume event of your Zaurus. + on Opie start - <P>Pass code protection provides a minimal level of protection from casual access to this device. + on Opie resume - Login + Multiple plugins authentication - Login Automatically + Required successes - If you select this option, opie-login will automagically log you in with the user you have selected in the drop-down list. - -For the Zaurus 5x00 this is always the user "root". + Debug options - This drop-down list allows you to select the user for auto-login -(if enabled above). - -You can only select an actually configured user. + Don't protect this config screen + + + + Show explanatory screens + + + + Allow to bypass authentication + + + + Note: the third option implies the second one + + + + + Security + + + SecurityBase + + + SyncBase + + SyncBase @@ -191,15 +219,15 @@ Beware that all manually entered net ranges will be lost! - IntelliSync + Qtopia 1.7 - Qtopia 1.7 + Opie 1.0 - Opie 1.0 + IntelliSync diff --git a/i18n/zh_TW/security.ts b/i18n/zh_TW/security.ts index dc36a67..f785032 100644 --- a/i18n/zh_TW/security.ts +++ b/i18n/zh_TW/security.ts @@ -1,43 +1,69 @@ - Security + LoginBase - Set passcode - 設定通行碼 + LoginBase + - Change passcode - 改變通行碼 + Login + - Enter passcode - 輸入通行碼 + Login Automatically + - Passcode incorrect - 通行碼不正確 + If you select this option, opie-login will automagically log you in with the user you have selected in the drop-down list. + +For the Zaurus 5x00 this is always the user "root". + - The passcode entered is incorrect. -Access denied - 輸入的通行碼不正確. -存取已拒絕 + This drop-down list allows you to select the user for auto-login +(if enabled above). + +You can only select an actually configured user. + + + + MultiauthConfig - Any - 任何 + Security configuration + - None - 無 + Load which plugins in what order: + - Enter new passcode - 輸入新的通行碼 + Check a checkbox to activate/deactivate a plugin or use the arrow buttons on the right to change the order they will appear in + - Re-enter new passcode - 重新輸入新的通行碼 + Move Up + + + + Move Down + + + + plugins + + + + Authentication + + + + Login + + + + Sync + 同步化 Attention @@ -79,32 +105,148 @@ Access denied 1.0.0.0/8 1.0.0.0/8 + + Any + 任何 + + + None + 無 + + + + MultiauthGeneralConfig + + When to lock Opie + + + + on Opie start + + + + on Opie resume + + + + Multiple plugins authentication + + + + Required successes + + + + Debug options + + + + Don't protect this config screen + + + + Show explanatory screens + + + + Allow to bypass authentication + + + + Note: the third option implies the second one + + + + + Security + + Set passcode + 設定通行碼 + + + Change passcode + 改變通行碼 + + + Enter passcode + 輸入通行碼 + + + Passcode incorrect + 通行碼不正確 + + + The passcode entered is incorrect. +Access denied + 輸入的通行碼不正確. +存取已拒絕 + + + Any + 任何 + + + None + 無 + + + Enter new passcode + 輸入新的通行碼 + + + Re-enter new passcode + 重新輸入新的通行碼 + + + 192.168.129.0/24 + 192.168.129.0/24 + + + 192.168.1.0/24 + 192.168.1.0/24 + + + 192.168.0.0/16 + 192.168.0.0/16 + + + 172.16.0.0/12 + 172.16.0.0/12 + + + 10.0.0.0/8 + 10.0.0.0/8 + + + 1.0.0.0/8 + 1.0.0.0/8 + SecurityBase Security Settings - 安全性設定 + 安全性設定 Change passcode - 改變通行碼 + 改變通行碼 Clear passcode - 清除通行碼 + 清除通行碼 Require pass code at power-on - 在電源開啟時要求輸入通行碼 + 在電源開啟時要求輸入通行碼 Sync - 同步化 + 同步化 Accept sync from network: - 允許來自網路的同步化: + 允許來自網路的同步化: 192.168.0.0/16 @@ -128,7 +270,7 @@ Access denied <P>Pass code protection provides a minimal level of protection from casual access to this device. - <P>通行碼防護提供基本層級的保護以避免對此裝置隨意的存取. + <P>通行碼防護提供基本層級的保護以避免對此裝置隨意的存取. 192.168.129.0/24 (default) @@ -142,45 +284,20 @@ Access denied 1.0.0.0/8 1.0.0.0/8 + + + SyncBase - Passcode - - - - Login - - - - Login Automatically - - - - This button will let you change the security passcode. - -Note: This is *not* the sync password. - - - - Delete the current passcode. -You can enter a new one at any time. - - - - If you enable this option, a passcode must be entered after every resume event of your Zaurus. + SyncBase - If you select this option, opie-login will automagically log you in with the user you have selected in the drop-down list. - -For the Zaurus 5x00 this is always the user "root". - + Sync + 同步化 - This drop-down list allows you to select the user for auto-login -(if enabled above). - -You can only select an actually configured user. - + Accept sync from network: + 允許來自網路的同步化: Select a net-range or enter a new one. @@ -224,15 +341,15 @@ Beware that all manually entered net ranges will be lost! - IntelliSync + Qtopia 1.7 - Qtopia 1.7 + Opie 1.0 - Opie 1.0 + IntelliSync -- cgit v0.9.0.2