From ff93c49af890b2b03f729a848be36b77a6e2454b Mon Sep 17 00:00:00 2001 From: eilers Date: Tue, 04 Jan 2005 09:27:04 +0000 Subject: First unfinished and undebugged release of the PIM-API Howto paper --- (limited to 'development/pim') diff --git a/development/pim/pim_howto/pim_howto.lyx b/development/pim/pim_howto/pim_howto.lyx new file mode 100644 index 0000000..2b08be8 --- a/dev/null +++ b/development/pim/pim_howto/pim_howto.lyx @@ -0,0 +1,1213 @@ +#LyX 1.3 created this file. For more info see http://www.lyx.org/ +\lyxformat 221 +\textclass scrbook +\begin_preamble +\fancyhead{} +\fancyfoot{} +\fancyhead[LE,RO]{\slshape \leftmark} +\fancyhead[LO,RE]{\slshape \leftmark} +\fancyhead[RE,LO]{\thepage} +%\fancyhead[LO,RE]{} +% \usepackage{ae} +\usepackage[bookmarksopen,colorlinks]{hyperref} +% \pdfoutput=1 +% \pdfcompresslevel=8 +% \pdfinfo{ +% /Title ClearSim-RealtTime und Andere +% /Creator (Tex) +% /Author (Stefan Eilers) +% /Subject () +% /Keywords (Simulation,Real-Time,ClearSim,prototype,efsm) +% } +\renewcommand\familydefault{\sfdefault} + +\usepackage{multicol} +\newcommand\NrCol{3} +\renewenvironment{theindex} + {\columnseprule \z@ + \columnsep 35\p@ + \section*{\indexname}% + \@mkboth{\MakeUppercase\indexname}% + {\MakeUppercase\indexname}% + \begin{multicols}{\NrCol}\thispagestyle{plain}\parindent\z@ + \parskip\z@ \@plus .3\p@\relax + \let\item\@idxitem} + {\clearpage % + \end{multicols}} + +\renewenvironment{theindex} + {\if@twocolumn + \@restonecolfalse + \else + \@restonecoltrue + \fi + \columnseprule \z@ + \columnsep 35\p@ + \twocolumn[\refstepcounter{section}% + \section{\indexname}]% + \@mkboth{\MakeUppercase\indexname}% + {\MakeUppercase\indexname}% + \thispagestyle{plain}\parindent\z@ + \parskip\z@ \@plus .3\p@\relax + \let\item\@idxitem} + {\if@restonecol\onecolumn\else\clearpage\fi} +\end_preamble +\language german +\inputencoding auto +\fontscheme ae +\graphics default +\float_placement htbp +\paperfontsize default +\spacing single +\papersize a4paper +\paperpackage widemarginsa4 +\use_geometry 0 +\use_amsmath 0 +\use_natbib 0 +\use_numerical_citations 0 +\paperorientation portrait +\secnumdepth 3 +\tocdepth 3 +\paragraph_separation skip +\defskip medskip +\quotes_language german +\quotes_times 2 +\papercolumns 1 +\papersides 2 +\paperpagestyle fancy + +\layout Title + +How to use the Opie-Pim API without getting tired! +\newline +(Aka: Hitchhikers Guide Through the Opie-Pim API) +\newline +(Pre V 0.1) +\layout Author + + +\family sans +Stefan Eilers +\layout Section* + + +\family sans +Abstract +\layout Standard + +The Opie-Pim API provides a powerfull access interface to the PIM (Personal + Information Management) data which contains your contact information, the + dates in your calender tool (in this paper called datebook events) and + your todo events. + Beside providing full featured access to this information, it covers the + real management of this informantion - the access of the databases - from + the user. + +\layout Standard + +While starting to read the automatically generated API-documentation, the + user may be confused by a lot of unneccessary classes and details which + makes the quick start not as easy as expected. + Due to the fact that a user who just want to access data will not need + most of the details, this paper should help to start to be confortable + with the details he need to solve his problems. +\layout Standard + + +\begin_inset LatexCommand \tableofcontents{} + +\end_inset + + +\layout Chapter + +Introduction +\layout Standard + +Before starting to jump into the work, we should introduce some specialities + of the PIM API first. + To know these facts should help to avoid possible irritations and misunderstand +ings: +\layout Enumerate + +The PIM-API heavily uses C++ templates (as known as generic classes), but + you don't have to understand very deeple what templates are doing and how + they work! Most of the API works without even seeing the templates. + In some cases whe have to use them (for instance to use the factory classes) + but this guide will provide examples which should help to find the path + through. + But it is a good idea to read some short introduction of templates to avoid + unneccessary mistakes. +\layout Enumerate + +The PIM-API is split into two parts: The +\emph on +frontend +\emph default + and the +\emph on +backend. + +\emph default + While the frontend provides the API for the user, the backend implements + how to access the databases and what to do with the data. + This paper just focusses the frontend as we just want to access data. + Thus, you should ignore all classes which contains something like +\begin_inset Quotes gld +\end_inset + +backend +\begin_inset Quotes grd +\end_inset + + in its name! Backends are just interessting for people who want to extend + or implement new possiblities about how to access databases, which will + be discussed at the end of this paper. + Currently, you just have to understand that there do exist several backends + for every type of PIM data (Contact, Todo, Datebook) which controls whether + you want to access an XML, SQL (SQLite) or VCard style database. + If you just want to use the default database, you even don't have to think + about this! +\layout Standard + +In the next chapter, we will show how to access the default database as + easy as possible. + This will be the solution for most of the problems you may face while accessing + the PIM data. +\layout Chapter + +Quick Guide to access the Database +\layout Standard + +In this chapter we will introduce very quickly how to get access to the + database and how to access data. + It should help to find the right directions. + If it is too short for you, you should read the next chapter afterwards + to find a more complete and detailed view into the system. +\layout Section + +Instantiate the access-object +\begin_inset LatexCommand \label{sec:Instantiate-the-Access} + +\end_inset + + +\layout Standard + +To gain access to the database you need something we will call +\emph on + access-object +\emph default + (an instance of the access-class for the database) which handles the database + access. + Requesting such an object is very easy by using the operation +\emph on +defaultAccess() +\emph default + of the factory class +\series bold +OPimAccessFactory +\series default + (see +\begin_inset LatexCommand \url{http://www.sra.uni-hannover.de/~eilers/apidocs/pim2/html/classOpie_1_1OPimAccessFactory.html} + +\end_inset + +). + This operation is defined like this: +\layout LyX-Code + +T* defaultAccess (typename OPimGlobal::PimType type, const QString &appName) +\layout Standard + +You just have to add the following lines to your source code to use it (this + example is for accessing the contact database): +\layout LyX-Code + +#include +\layout LyX-Code + +use namespace Opie; +\layout Standard + +[...] +\layout LyX-Code + +OPimContactAccess* sourceDB = OPimAccessFactory::defaultAcces +s( OPimGlobal::CONTACTLIST, "my-app" ); +\layout Standard + +If everything works as expected, you will receive a pointer to the contact + access-class which has to be used for accessing the database. + Accessing the datebook database works equally +\begin_inset Foot +collapsed true + +\layout Standard + +The API will be changed in the future: ODateBookAccess will be renamed to + OPimEventAccess. +\end_inset + +: +\layout LyX-Code + +ODateBookAccess* sourceDB = OPimAccessFactory::defaultAccess( + OPimGlobal::DATEBOOK, "my-app" ); +\layout Standard + +And the same for todo: +\layout LyX-Code + +OPimTodoAccess* sourceDB = OPimAccessFactory::defaultAccess( + OPimGlobal::TODOLIST, "my-app" ); +\layout Standard + +Using +\emph on + +\begin_inset Quotes gld +\end_inset + +defaultAccess() +\begin_inset Quotes grd +\end_inset + + +\emph default +, the default dabase is accessed automatically +\begin_inset Foot +collapsed true + +\layout Standard + +The configuration file +\begin_inset Quotes gld +\end_inset + +pimaccess.conf +\begin_inset Quotes grd +\end_inset + + defines which backend is selected as default! +\end_inset + +. + If you want to use anything else, you have to read the next chapter to + get the information how to do this. + +\layout Standard + +The last parameter +\begin_inset Quotes gld +\end_inset + +my-app +\begin_inset Quotes grd +\end_inset + + is very importand and should be equal for every instance of an application. + Some database backends (like the XML backend) uses this string as an unique + filename to create a journal file. + If your application should run in several instances independently you will + need multiple journal files and therefore several name strings! +\layout Standard + +If the database access-object is is not needed anymore, you have to remove + it by calling +\emph on +delete +\emph default +: +\layout LyX-Code + +delete sourceDB; +\layout Section + +Accessing the access-object +\begin_inset LatexCommand \label{sec:Accessing-the-access-object} + +\end_inset + + +\layout Standard + +After receiving the access-object, we just have to use its API which is + mainly defined by the common base class +\series bold +OPimAccessTemplate +\series default + (see +\begin_inset LatexCommand \url{http://www.sra.uni-hannover.de/~eilers/apidocs/pim2/html/classOpie_1_1OPimAccessTemplate.html} + +\end_inset + +). + This API is inherited by all access-classes and therefore common to all + access-objects. + We will show the most important operations of it first (please replace + +\begin_inset Quotes gld +\end_inset + +T +\begin_inset Quotes grd +\end_inset + + below with the corresponding +\emph on +data-class +\emph default + for the selected access-class: OPimContact +\begin_inset Foot +collapsed true + +\layout Standard + +see +\begin_inset LatexCommand \url{http://www.sra.uni-hannover.de/~eilers/apidocs/pim2/html/classOpie_1_1OPimContact.html} + +\end_inset + + +\end_inset + + for OPimContactAccess, OPimEvent +\begin_inset Foot +collapsed true + +\layout Standard + +see +\begin_inset LatexCommand \url{http://www.sra.uni-hannover.de/~eilers/apidocs/pim2/html/classOpie_1_1OPimEvent.html} + +\end_inset + + +\end_inset + + for ODateBookAccess and OPimTodo +\begin_inset Foot +collapsed true + +\layout Standard + +see +\begin_inset LatexCommand \url{http://www.sra.uni-hannover.de/~eilers/apidocs/pim2/html/classOpie_1_1OPimTodo.html} + +\end_inset + + +\end_inset + + for OPimTodoAccess): +\layout LyX-Code + +bool load (); +\layout LyX-Code + +bool reload (); +\layout LyX-Code + +bool save (); +\layout LyX-Code + +\layout LyX-Code + +bool add (const T& t); +\layout LyX-Code + +bool remove (const T& t); +\layout LyX-Code + +bool replace (const T& t); +\layout Standard + +After receiving an access-object, we have to load the existing dataset, + which is done by the +\begin_inset Quotes gld +\end_inset + +load() +\begin_inset Quotes grd +\end_inset + + operation. + The +\begin_inset Quotes gld +\end_inset + +save() +\begin_inset Quotes grd +\end_inset + + operation is important to write back (or +\emph on +commit +\emph default +) local changes into the global database. + After doing this, the changes are globally accessable! The +\begin_inset Quotes gld +\end_inset + +reload() +\begin_inset Quotes grd +\end_inset + + operation loads changes of the global database into the local set +\series bold +without +\series default + removing any local changes +\begin_inset Foot +collapsed true + +\layout Standard + +We should check whether all dabases behave like this! (se) +\end_inset + +. + This may be done after receiving information about any change by an other + application which is not in scope of this chapter. + The other operations are self explaining and should work as expected. +\layout Standard + +If you want to work with the existing dataset, you need to get a list of + all available information. + This list is returned by the call +\begin_inset Quotes gld +\end_inset + +allRecords() +\begin_inset Quotes grd +\end_inset + + which returns a list of all available records as an +\series bold +OPimRecordList +\series default + (see +\begin_inset LatexCommand \url{http://www.sra.uni-hannover.de/~eilers/apidocs/pim2/html/classOpie_1_1OPimRecordList.html} + +\end_inset + +). + +\layout LyX-Code + +List allRecords (); +\layout Standard + +In fact this +\emph on +List +\emph default + just contains a list of uid's to take care of memory space. + As every record is identified by an unique identifaction number which is + called UID (Unique IDentification), these numbers just exists once in the + database which is currently on access! To receive the real record, you + have to use the operation +\begin_inset Quotes gld +\end_inset + +find() +\begin_inset Quotes grd +\end_inset + + with a valid UID as paramter: +\layout LyX-Code + +T find (UID uid); +\layout Standard + +This is all you need to realize a basic access to the PIM-Databases! The + next chapter will guide you into more details of the PIM-API. +\layout Chapter + +How to Access PIM-Data: Detailed View +\layout Standard + +As shown in the previous chapter, all we need to access the PIM-Database + is to request an access-object from the OPimAccessFactory and to use it. + We will now introduce some special features of this factory (see section + +\begin_inset LatexCommand \ref{sec:Advanced-Factory-Features} + +\end_inset + +), followed by some very important features like searching and sorting in + section +\begin_inset LatexCommand \ref{sec:Special-Features:-Searching} + +\end_inset + +. + If you are interested in accessing data without take care about their types, + section +\begin_inset LatexCommand \ref{sec:Generic-Access:-OPimBase} + +\end_inset + + will show how to do this, followed by a short introduction about delayed + loading in section +\begin_inset LatexCommand \ref{sec:Internal-Signal-Handling:} + +\end_inset + +. +\layout Standard + +But first we will start with intoducing some features of the +\series bold +OPimAccessFactory +\series default +. +\layout Section + +Advanced Factory Features +\begin_inset LatexCommand \label{sec:Advanced-Factory-Features} + +\end_inset + + +\layout Standard + +In the previous chapter we used the operation +\begin_inset Quotes gld +\end_inset + +defaultAccess() +\begin_inset Quotes grd +\end_inset + + to request an access-object to the dafault backend. + Whether this default backend will access the XML, VCard or SQLite database + type, this is defined by the configuration file +\begin_inset Quotes gld +\end_inset + +pimaccess.conf +\begin_inset Quotes grd +\end_inset + + which is stored in the directory +\begin_inset Quotes gld +\end_inset + +Settings +\begin_inset Quotes grd +\end_inset + +, stored in the user home directory. + Changing this setting will take effect to all applications using +\begin_inset Quotes gld +\end_inset + +defaultAccess() +\begin_inset Quotes grd +\end_inset + +. + Therefore it is not a good idea to modify a global setting, if an application + should access a special database type, for instance to move data from one + database to an other. + +\layout Standard + +If the developer wants to select a special database type for sure, he has + to use the oparation +\emph on +create() +\emph default + which has the following parameters: +\layout LyX-Code + +T * create (OPimGlobal::PimType type, OPimGlobal::DatabaseStyle dbStyle, + const QString &appName, const QString &fileName=QString::null) +\layout Standard + +Some paramters are already known, like type and appName (see section +\begin_inset LatexCommand \ref{sec:Instantiate-the-Access} + +\end_inset + +). + The new parameter +\begin_inset Quotes gld +\end_inset + +dbStyle +\begin_inset Quotes grd +\end_inset + + defines which database type should be selected. + Possible values could be found in the enumeration +\emph on +DataBaseStyle +\emph default + in the class +\series bold +OPimGlobal +\series default + (see +\begin_inset LatexCommand \url{http://www.sra.uni-hannover.de/~eilers/apidocs/pim2/html/classOpie_1_1Pim_1_1OPimGlobal.html} + +\end_inset + +). + +\begin_inset Quotes gld +\end_inset + +DEFAULT +\begin_inset Quotes grd +\end_inset + + selects the default database and therefore behaves exactly as the operation + +\begin_inset Quotes gld +\end_inset + +defaultAccess() +\begin_inset Quotes grd +\end_inset + + above. + +\begin_inset Quotes gld +\end_inset + +UNKOWN +\begin_inset Quotes grd +\end_inset + + is just defined for internal reasons and should not be used be the developer. + The remaining values ( +\begin_inset Quotes gld +\end_inset + +XML +\begin_inset Quotes grd +\end_inset + +, +\begin_inset Quotes gld +\end_inset + +SQL +\begin_inset Quotes grd +\end_inset + +, +\begin_inset Quotes gld +\end_inset + +VCARD +\begin_inset Quotes grd +\end_inset + +) should be used to select the desired database backend. + The last parameter +\begin_inset Quotes gld +\end_inset + +fileName +\begin_inset Quotes grd +\end_inset + + is used to select a special file name and path to the database file. + Thus, you can use it to access database files which don't reside on the + default path or have other filenames as it is defined by the platform as + default (in normal cases +\begin_inset Quotes gld +\end_inset + +~/Applications// +\begin_inset Quotes grd +\end_inset + +). +\layout Standard + +In the next section we will discuss how searching and sorting take place + with this API. +\layout Section + +Special Features: Searching and Sorting +\begin_inset LatexCommand \label{sec:Special-Features:-Searching} + +\end_inset + + +\layout Standard + +In most cases it is not sufficient to receive just a list of all information + in a database. + It is essential to get a subset of the information available and to be + able to sort it. + For this kind of excercise we provide some special operations which provide + searching and sorting in an incremental manner +\begin_inset Foot +collapsed true + +\layout Standard + +FIXME: matchRegexp() does take a list of uid's. + Therefore it is currently not possible to use it in an incremental manner! + (se) +\end_inset + +. + Therfore it is possible to research a +\begin_inset Quotes gld +\end_inset + +List +\begin_inset Quotes grd +\end_inset + + which was returned by a previous search query and to sort it afterwards. + Before we will take a close look into sorting, we will start with searching. + There exist two different ways of searching: +\layout Enumerate + +Search a complete database for a special regular expression, using +\begin_inset Quotes gld +\end_inset + +matchRegexp () +\begin_inset Quotes grd +\end_inset + +. + This search type returns all records which contains the given regular expressio +n +\emph on +anywhere +\emph default + in the dataset. + This search type is used for example by the opie search tool (OSearch) + (see +\begin_inset LatexCommand \url{http://handhelds.org/cgi-bin/cvsweb.cgi/opie/core/pim/osearch/} + +\end_inset + + and +\begin_inset LatexCommand \url{http://handhelds.org/cgi-bin/cvsweb.cgi/opie/core/pim/osearch/adresssearch.cpp?rev=1.12&content-type=text/x-cvsweb-markup} + +\end_inset + +). +\layout Enumerate + +Define a so called +\begin_inset Quotes gld +\end_inset + +Query By Example +\begin_inset Quotes grd +\end_inset + + search query which allows to define what should be searched and which internal + data fields should be taken into account. + This is a very advanced search function which allows to search in a very + fine granular manner. +\layout Standard + +We will start with the first and very simple +\begin_inset Quotes grd +\end_inset + +matchRegexp() +\begin_inset Quotes grd +\end_inset + +, followed by the query by example search query. +\layout Subsection + +Searching with +\begin_inset Quotes gld +\end_inset + +matchRegexp() +\begin_inset Quotes grd +\end_inset + + +\layout Standard + +The function is defined like this: +\layout LyX-Code + +List matchRegexp (const QRegExp &r); +\layout Standard + +The +\begin_inset Quotes gld +\end_inset + +List +\begin_inset Quotes grd +\end_inset + + is still a OPimRecordList which contains 0 or more uid's of matching records. + As already discussed in section +\begin_inset LatexCommand \ref{sec:Accessing-the-access-object} + +\end_inset + + you have to use the +\begin_inset Quotes gld +\end_inset + +find() +\begin_inset Quotes grd +\end_inset + + operation to request the real records. +\layout Subsection + +Searching with Query By Example +\layout Standard + +The query by example search style is working is using a data object (for + instance an OPimContact) to store the search query. + For instance, if you want to request all entries which contains the last + name +\begin_inset Quotes gld +\end_inset + +Eilers +\begin_inset Quotes grd +\end_inset + + and the home zip number should start with +\begin_inset Quotes gld +\end_inset + +3 +\begin_inset Quotes grd +\end_inset + + you have to do the following: +\layout LyX-Code + +OPimContact searchQuery; +\layout LyX-Code + +searchQuery.setLastName( +\begin_inset Quotes gld +\end_inset + +Eilers +\begin_inset Quotes grd +\end_inset + + ); +\layout LyX-Code + +searchQuery.setHomeZip( +\begin_inset Quotes gld +\end_inset + +3* +\begin_inset Quotes grd +\end_inset + + ); +\layout Standard + +We use a usual +\begin_inset Quotes gld +\end_inset + +OPimContact +\begin_inset Quotes grd +\end_inset + + and fill into two fields the search information. + As we just want to search for entries which zip number starts with a +\begin_inset Quotes gld +\end_inset + +3 +\begin_inset Quotes grd +\end_inset + + we use the Wildcard +\begin_inset Quotes gld +\end_inset + +* +\begin_inset Quotes grd +\end_inset + + as we would do for finding files in a filesystem. +\layout Standard + +The next step is to put this query into the operation which is defined like + this: +\layout LyX-Code + +List queryByExample (const T& query, int querySettings, const QDateTime + &startperiod=QDateTime()) +\layout Standard + +The first parameter +\begin_inset Quotes gld +\end_inset + +query +\begin_inset Quotes grd +\end_inset + + should used to set our query, but we have to set the parameter +\begin_inset Quotes gld +\end_inset + +querySettings +\begin_inset Quotes grd +\end_inset + + to configure the search properly. + This settings are defined by the enum QuerySettings in the class +\series bold +OPimBase +\series default + (see +\begin_inset LatexCommand \url{http://www.sra.uni-hannover.de/~eilers/apidocs/pim2/html/structOpie_1_1OPimBase.html#w19} + +\end_inset + +). + The meaning of all settings will be discussed later. + For the first turn we will just concentrate on the things we need in this + case. + As we use Wildcards in +\begin_inset Quotes gld +\end_inset + +setHomeZip +\begin_inset Quotes grd +\end_inset + + we have to use +\begin_inset Quotes gld +\end_inset + +WildCards +\begin_inset Quotes grd +\end_inset + +. + And we want to be sure to find lower case names, too, which may be mistyped + (like +\begin_inset Quotes gld +\end_inset + +eilers +\begin_inset Quotes grd +\end_inset + +, +\begin_inset Quotes gld +\end_inset + +eIlers +\begin_inset Quotes grd +\end_inset + +, ...). + Thus we have to use the +\begin_inset Quotes gld +\end_inset + +IgnoreCase +\begin_inset Quotes grd +\end_inset + + setting which is to combine with the other using an +\begin_inset Quotes gld +\end_inset + +or +\begin_inset Quotes grd +\end_inset + + operator. + The last parameter +\begin_inset Quotes gld +\end_inset + +endperiod +\begin_inset Quotes grd +\end_inset + + will be ignored for this case which will look like this: +\layout LyX-Code + +use namespace Opie; +\layout LyX-Code + +[...] +\layout LyX-Code + +List found_items = queryByExample( searchQuery, OPimBase::WildCards | OpimBase:: +IgnoreCase ); +\layout Standard + +This operation may return a list of entries which can be accesses as usual, + using the +\begin_inset Quotes gld +\end_inset + +find() +\begin_inset Quotes grd +\end_inset + + operation. +\layout Standard + +It should be clear at this stage, that this query is very powerful and - + depending to the querySettings - could be very complicated to implement. + Thus, not all backends do support all features defined by querySettings +\begin_inset Foot +collapsed true + +\layout Standard + +At this time, just the contact database for XML and VCard is supporting + all queries and combination of them. + All others just support subsets. +\end_inset + +. + To check which settings are supported and to be able to react dynamically + on missing features (for instance to disable some search features in the + application) we provide the following operations: +\layout LyX-Code + +bool hasQuerySettings( uint querySettings ); +\layout LyX-Code + +uint querySettings(); +\layout Standard + +The first operation +\begin_inset Quotes gld +\end_inset + +hasQuerySettings() +\begin_inset Quotes grd +\end_inset + + may be used to ask whether the database can handle the given query settings. + In this example a call to +\layout LyX-Code + +hasQuerySettings( OPimBase::WildCards | OpimBase::IgnoreCase ); +\layout Standard + +should be answered with +\begin_inset Quotes gld +\end_inset + +true +\begin_inset Quotes grd +\end_inset + +. + If you need to ask which kind of queries are supported, the operation +\begin_inset Quotes gld +\end_inset + +querySettings() +\begin_inset Quotes grd +\end_inset + + will be your friend. + It will return an unsigned integer value where a +\begin_inset Quotes gld +\end_inset + +1 +\begin_inset Quotes grd +\end_inset + + is set for every available feature. +\layout Standard + +The last parameter is called +\begin_inset Quotes gld +\end_inset + +startperiod +\begin_inset Quotes grd +\end_inset + + which is used to set a time interval: +\layout Standard + +In some cases, a time interval should be set to find for instance all entries + between two dates (used for example by the birthday reminder for today + (see here: +\begin_inset LatexCommand \url{http://handhelds.org/cgi-bin/cvsweb.cgi/opie/core/pim/today/plugins/addressbook/addresspluginwidget.cpp?rev=1.14&content-type=text/x-cvsweb-markup} + +\end_inset + +)) as requested by the setting +\begin_inset Quotes gld +\end_inset + +OPimBase::DateDiff +\begin_inset Quotes grd +\end_inset + +. + The date and time in the query object is used as the +\series bold +end +\series default + of the interval. + The start will be defined by the last parameter (if nothing is set, the + current date will be taken!). + Therefore, it is possible to set a time frame for all searched entries. +\layout Section + +Generic Access: OPimBase and OPimRecord +\begin_inset LatexCommand \label{sec:Generic-Access:-OPimBase} + +\end_inset + + +\layout Section + +Caching +\layout Standard + +Need to be written. + Implementation is found at: +\begin_inset LatexCommand \url{http://handhelds.org/cgi-bin/cvsweb.cgi/opie/noncore/tools/pimconverter/converter.cpp?rev=1.9&content-type=text/x-cvsweb-markup} + +\end_inset + + +\layout Section + +Internal Signal Handling: Automatic Propagation of Changes +\begin_inset LatexCommand \label{sec:Internal-Signal-Handling:} + +\end_inset + + +\layout Standard + +Need to be written and is not implemented completly! +\layout Chapter + +Howto Extend and Write New Backends +\layout Standard + +Need to be written. +\the_end -- cgit v0.9.0.2