<!DOCTYPE TS><TS>
<defaultcodec>iso8859-1</defaultcodec>
<context>
    <name>LoginBase</name>
    <message>
        <source>LoginBase</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Login</source>
        <translation type="unfinished">Login</translation>
    </message>
    <message>
        <source>Login Automatically</source>
        <translation type="unfinished">Login Automatico</translation>
    </message>
    <message>
        <source>If you select this option, opie-login will automagically log you in with the user you have selected in the drop-down list.  

For the Zaurus 5x00 this is always the user &quot;root&quot;.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>This drop-down list allows you to select the user for auto-login
(if enabled above).  

You can only select an actually configured user.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>MultiauthConfig</name>
    <message>
        <source>Security configuration</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Load which plugins in what order:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Check a checkbox to activate/deactivate a plugin or use the arrow buttons on the right to change the order they will appear in</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Move Up</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Move Down</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>plugins</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Authentication</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Login</source>
        <translation type="unfinished">Login</translation>
    </message>
    <message>
        <source>Sync</source>
        <translation type="unfinished">Sync</translation>
    </message>
    <message>
        <source>Attention</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>192.168.129.0/24</source>
        <translation type="obsolete">192.168.129.0/24</translation>
    </message>
    <message>
        <source>192.168.1.0/24</source>
        <translation type="obsolete">192.168.1.0/24</translation>
    </message>
    <message>
        <source>192.168.0.0/16</source>
        <translation type="obsolete">192.168.0.0/16</translation>
    </message>
    <message>
        <source>172.16.0.0/12</source>
        <translation type="obsolete">172.16.0.0/12</translation>
    </message>
    <message>
        <source>10.0.0.0/8</source>
        <translation type="obsolete">10.0.0.0/8</translation>
    </message>
    <message>
        <source>1.0.0.0/8</source>
        <translation type="obsolete">1.0.0.0/8</translation>
    </message>
    <message>
        <source>Any</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>None</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Important notice</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>To be able to protect your PDA with one or more authentication plugins (for example, a simple PIN authentication), you must install at least one &lt;em&gt;opie-multiauth-*&lt;/em&gt; package! Once you have done that, you will be able to configure your PDA protection here.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Locking</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>All user-defined net ranges will be lost.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>OK</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>MultiauthGeneralConfig</name>
    <message>
        <source>When to lock Opie</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>on Opie start</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>on Opie resume</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Multiple plugins authentication</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Required successes</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Don&apos;t protect this config screen</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Show explanatory screens</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Options</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Testing</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Test the authentication now</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Attention</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>You must save your current settings before trying to authenticate. Press OK to accept and launch a simulated authentication process.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>If you don&apos;t like the result of this test, don&apos;t forget to change your settings before you exit the configuration application!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>OK</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>Security</name>
    <message>
        <source>Set passcode</source>
        <translation type="obsolete">Imposta password</translation>
    </message>
    <message>
        <source>Change passcode</source>
        <translation type="obsolete">Cambia password</translation>
    </message>
    <message>
        <source>Enter passcode</source>
        <translation type="obsolete">Inserisci password</translation>
    </message>
    <message>
        <source>Passcode incorrect</source>
        <translation type="obsolete">Password errata</translation>
    </message>
    <message>
        <source>The passcode entered is incorrect.
Access denied</source>
        <translation type="obsolete">La password inserita รจ sbagliata.
Accesso negato</translation>
    </message>
    <message>
        <source>Any</source>
        <translation type="obsolete">Tutti</translation>
    </message>
    <message>
        <source>None</source>
        <translation type="obsolete">Nessuno</translation>
    </message>
    <message>
        <source>Enter new passcode</source>
        <translation type="obsolete">Inserisci nuova password</translation>
    </message>
    <message>
        <source>Re-enter new passcode</source>
        <translation type="obsolete">Rinserisci nuova password</translation>
    </message>
    <message>
        <source>192.168.129.0/24</source>
        <translation type="obsolete">192.168.129.0/24</translation>
    </message>
    <message>
        <source>192.168.1.0/24</source>
        <translation type="obsolete">192.168.1.0/24</translation>
    </message>
    <message>
        <source>192.168.0.0/16</source>
        <translation type="obsolete">192.168.0.0/16</translation>
    </message>
    <message>
        <source>172.16.0.0/12</source>
        <translation type="obsolete">172.16.0.0/12</translation>
    </message>
    <message>
        <source>10.0.0.0/8</source>
        <translation type="obsolete">10.0.0.0/8</translation>
    </message>
    <message>
        <source>1.0.0.0/8</source>
        <translation type="obsolete">1.0.0.0/8</translation>
    </message>
</context>
<context>
    <name>SecurityBase</name>
    <message>
        <source>Security Settings</source>
        <translation type="obsolete">Impostazioni Sicurezza</translation>
    </message>
    <message>
        <source>Change passcode</source>
        <translation type="obsolete">Cambia password</translation>
    </message>
    <message>
        <source>Clear passcode</source>
        <translation type="obsolete">Cancella password</translation>
    </message>
    <message>
        <source>Require pass code at power-on</source>
        <translation type="obsolete">Richiedi password all&apos;avvio</translation>
    </message>
    <message>
        <source>Sync</source>
        <translation type="obsolete">Sync</translation>
    </message>
    <message>
        <source>Accept sync from network:</source>
        <translation type="obsolete">Accetta sync dalla rete:</translation>
    </message>
    <message>
        <source>192.168.129.0/24 (default)</source>
        <translation type="obsolete">192.168.129.0/24 (predefinita)</translation>
    </message>
    <message>
        <source>192.168.1.0/24</source>
        <translation type="obsolete">192.168.1.0/24</translation>
    </message>
    <message>
        <source>192.168.0.0/16</source>
        <translation type="obsolete">192.168.0.0/16</translation>
    </message>
    <message>
        <source>172.16.0.0/12</source>
        <translation type="obsolete">172.16.0.0/12</translation>
    </message>
    <message>
        <source>10.0.0.0/8</source>
        <translation type="obsolete">10.0.0.0/8</translation>
    </message>
    <message>
        <source>Any</source>
        <translation type="obsolete">Tutte</translation>
    </message>
    <message>
        <source>None</source>
        <translation type="obsolete">Nessuna</translation>
    </message>
    <message>
        <source>&lt;P&gt;Pass code protection provides a minimal level of protection from casual access to this device.</source>
        <translation type="obsolete">&lt;P&gt;La protezione mediante password fornisce un minimo livello di protezione dall&apos;accesso illegale del dispositivo.</translation>
    </message>
    <message>
        <source>1.0.0.0/8</source>
        <translation type="obsolete">1.0.0.0/8</translation>
    </message>
    <message>
        <source>Passcode</source>
        <translation type="obsolete">Password</translation>
    </message>
    <message>
        <source>Login</source>
        <translation type="obsolete">Login</translation>
    </message>
    <message>
        <source>Login Automatically</source>
        <translation type="obsolete">Login Automatico</translation>
    </message>
</context>
<context>
    <name>SyncBase</name>
    <message>
        <source>SyncBase</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Sync</source>
        <translation type="unfinished">Sync</translation>
    </message>
    <message>
        <source>Accept sync from network:</source>
        <translation type="unfinished">Accetta sync dalla rete:</translation>
    </message>
    <message>
        <source>Select a net-range or enter a new one.  

This drop-down list lets you select a net range which is allowed to connect to your Zaurus.  

For example, a net range of 192.168.1.0/24 will allow any machine with an IP between 192.168.1.1 and 192.168.1.254 to connect to (and sync with) your Zaurus.  

The entry &quot;All&quot; will allow *any* IP to connect. 
The entry &quot;None&quot; will *deny* any connection.  

If unsure, select &quot;Any&quot;.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Delete Entry</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Delete the selected net range from the list

If you press this button, the currently selected net range will be deleted from the list of net ranges.

If you hit this button in error, the button &quot;Restore Defaults&quot; will restore
the list to the state it has been when you initially booted your Zaurus.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Restore Defaults</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>This button will restore the list of net ranges
to the defaults.

Beware that all manually entered net ranges will be lost!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Select your sync software</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Qtopia 1.7</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Opie 1.0</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>IntelliSync</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Alter the Sync Protocol to tweak for the different devices.
<byte value="x9"/><byte value="x9"/><byte value="x9"/><byte value="x9"/>    IntelliSync will disable the password check but you&apos;ll be prompted to accept the connection.
<byte value="x9"/><byte value="x9"/><byte value="x9"/><byte value="x9"/>    Opie1.0 will be compatible with QtopiaDesktop, MultiSync and KitchenSync
<byte value="x9"/><byte value="x9"/><byte value="x9"/><byte value="x9"/>    Qtopia1.7 will alter the way data is send to the client and will not work with older clients.
<byte value="x9"/><byte value="x9"/><byte value="x9"/><byte value="x9"/>    </source>
        <translation type="unfinished"></translation>
    </message>
</context>
</TS>