LoginBase LoginBase Login Login Automatically If you select this option, opie-login will automagically log you in with the user you have selected in the drop-down list. For the Zaurus 5x00 this is always the user "root". This drop-down list allows you to select the user for auto-login (if enabled above). You can only select an actually configured user. MultiauthConfig Security configuration Load which plugins in what order: Check a checkbox to activate/deactivate a plugin or use the arrow buttons on the right to change the order they will appear in Move Up Move Down plugins Authentication Login Sync 同步化 Attention <p>All user-defined net ranges will be lost. Cancel Ok 192.168.129.0/24 192.168.129.0/24 192.168.1.0/24 192.168.1.0/24 192.168.0.0/16 192.168.0.0/16 172.16.0.0/12 172.16.0.0/12 10.0.0.0/8 10.0.0.0/8 1.0.0.0/8 1.0.0.0/8 Any 任何 None 無 MultiauthGeneralConfig When to lock Opie on Opie start on Opie resume Multiple plugins authentication Required successes Debug options Don't protect this config screen Show explanatory screens Allow to bypass authentication Note: the third option implies the second one Security Set passcode 設定通行碼 Change passcode 改變通行碼 Enter passcode 輸入通行碼 Passcode incorrect 通行碼不正確 The passcode entered is incorrect. Access denied 輸入的通行碼不正確. 存取已拒絕 Any 任何 None 無 Enter new passcode 輸入新的通行碼 Re-enter new passcode 重新輸入新的通行碼 192.168.129.0/24 192.168.129.0/24 192.168.1.0/24 192.168.1.0/24 192.168.0.0/16 192.168.0.0/16 172.16.0.0/12 172.16.0.0/12 10.0.0.0/8 10.0.0.0/8 1.0.0.0/8 1.0.0.0/8 SecurityBase Security Settings 安全性設定 Change passcode 改變通行碼 Clear passcode 清除通行碼 Require pass code at power-on 在電源開啟時要求輸入通行碼 Sync 同步化 Accept sync from network: 允許來自網路的同步化: 192.168.0.0/16 192.168.0.0/16 172.16.0.0/12 172.16.0.0/12 10.0.0.0/8 10.0.0.0/8 Any 任何 None 無 <P>Pass code protection provides a minimal level of protection from casual access to this device. <P>通行碼防護提供基本層級的保護以避免對此裝置隨意的存取. 192.168.129.0/24 (default) 192.168.129.0/24 (預設值) 192.168.1.0/24 192.168.1.0/24 1.0.0.0/8 1.0.0.0/8 SyncBase SyncBase Sync 同步化 Accept sync from network: 允許來自網路的同步化: Select a net-range or enter a new one. This drop-down list lets you select a net range which is allowed to connect to your Zaurus. For example, a net range of 192.168.1.0/24 will allow any machine with an IP between 192.168.1.1 and 192.168.1.254 to connect to (and sync with) your Zaurus. The entry "All" will allow *any* IP to connect. The entry "None" will *deny* any connection. If unsure, select "Any". Delete Entry Delete the selected net range from the list If you press this button, the currently selected net range will be deleted from the list of net ranges. If you hit this button in error, the button "Restore Defaults" will restore the list to the state it has been when you initially booted your Zaurus. Restore Defaults This button will restore the list of net ranges to the defaults. Beware that all manually entered net ranges will be lost! Select your sync software Qtopia 1.7 Opie 1.0 IntelliSync Alter the Sync Protocol to tweak for the different devices. IntelliSync will disable the password check but you'll be prompted to accept the connection. Opie1.0 will be compatible with QtopiaDesktop, MultiSync and KitchenSync Qtopia1.7 will alter the way data is send to the client and will not work with older clients.