summaryrefslogtreecommitdiffabout
Side-by-side diff
Diffstat (more/less context) (ignore whitespace changes)
-rw-r--r--bin/Migration-HowTo.txt830
-rw-r--r--bin/Migration-HowToOL2Kolab.txt406
-rw-r--r--bin/winicons/ka1.icobin0 -> 5694 bytes
-rw-r--r--bin/winicons/ka2.icobin0 -> 5694 bytes
-rw-r--r--bin/winicons/ko1.icobin0 -> 5694 bytes
-rw-r--r--bin/winicons/ko2.icobin0 -> 5694 bytes
6 files changed, 618 insertions, 618 deletions
diff --git a/bin/Migration-HowTo.txt b/bin/Migration-HowTo.txt
index f9e8123..08fcfa5 100644
--- a/bin/Migration-HowTo.txt
+++ b/bin/Migration-HowTo.txt
@@ -1,415 +1,415 @@
-
-Migration HowTo Outlook 200X -> KDE
-
-Version 1.0.5
-The latest version of this file can be downloaded from
-http://sourceforge.net/projects/kdepimpi/
-Please choose there package/project/file:
-general Files for KDE/Pim
-MigrationHowTo_OL2KDE
-MigrationHowTo_OL2KDE.txt.zip
-
-
-This HowTo describes the process of migrating data ( contact and calendar data ) from Outlook 98/200X (TM) to the PIM programs of the KDE-Desktop-Environment.
-We will call Outlook as OL in this document.
-The PIM programs are KAdddressbook and KOrganizer, which may be used embedded in the Kontact PIM management framework.
-This HowTo describes version 1.9.5b of the migration tools.
-The migration tools are the platform independent versions of KAdddressbook and KOrganizer: KAdddressbook/Pi and KOrganizer/Pi.
-If you want to migrate emails, you can do that via an IMAP server.
-A Kolab server is an IMAP server.
-A HowTo how to migrate emails and contact and calendar data to a Kolab server using the Toltec (TM) Outlook(TM) plugin is available as well.
-You can found it on
-http://sourceforge.net/projects/kdepimpi/
-Please choose there package/project/file:
-general Files for KDE/Pim
-MigrationHowTo_OL2KDE
-MigrationHowTo_OL2Kolab.txt.zip
-
-Content:
-
-1) How to start
-2) How to import pst files in Outlook
-3) Where to get the migration tools
-4) How to install the migration tools
-5) How to get the contact data out of Outlook200X
-6) How to get the calendar data out of Outlook200X
-7) How to import your contact data into Kontact
-8) How to import your calendar data into Kontact
-
-APPENDIX A) Problems and solutions when reading contact data
-APPENDIX B) Problems and solutions when reading calendar data
-
-****************************************
-1) How to start
-****************************************
-
-For the migration we need the actual Outlook 200X data, which Outlook stores in *.pst files.
-Then we need an installed version of Outlook 200X to access these *.pst files.
-When we have an Outllook 200X running with all data accessable, we need the migration tools.
-
-If you have no Outlook200X installed please install the Outlook version, you need to a import your *.pst files.
-If you have an Outlook200X installed with no contact/calendar data available, and you have some *.pst files please continue with: 2) How to import pst files in Outlook.
-If you have a running Outlook200X already with contact/calendar data available, please continue with: 3) Where to get the migration tools.
-
-
-****************************************
-2) How to import pst files in Outlook
-****************************************
-
-To open a local *.pst file in Outlook2003, choose menu:
-File - Open - Outlook Data File ...
-Now the data included in this file is shown
-as folders of a newly added root folder in the Outlook folder view.
-This root folder is probably not accessable from
-the migration tools via OLE.
-To access data stored in one of the subfolders,
-copy this subfolder to a root folder,
-which can be accessed from the migration tools via OLE.
-(To know, which folder can be accessed, just perform 5.) or 6.) until
-you get the Oulook import dialog!)
-
-To copy it, right click on that subfolder and choose
-Copy "<subfoldername>"...
-in the popup menu.
-
-****************************************
-3) Where to get the migration tools
-****************************************
-
-The data migration is is performed with the Windows versions of KAdddressbook/Pi and KOrganizer/Pi.
-Pi stands for platform-independend - platform-independend because the same program is available for different platforms, like Windows, Linux desktop and Sharp-Zaurus PDA.
-Note: The Linux desktop versions of KOrganizer/Pi and KOrganizer/KDE-desktop are two different programs! You cannot use KOrganizer/Pi together with, or embedded in, the KDE-desktop environment. The same is valid for KAdddressbook/Pi.
-
-The programs you need for the migration are:
-a) KAdddressbook/Pi executeable + 2dlls + icons
-b) KOrganizer/Pi executeable + icons
-c) The Qt3 library qt-mt331.dll and the MSVC library msvcr71.dll and the MSVC library mfc71u.dll
-You can download all of them at:
-
-http://sourceforge.net/projects/kdepimpi/
-
-Download of a) and b)
-Please choose there package/project with name KDE/Pim
-(Direct link: http://sourceforge.net/project/showfiles.php?group_id=104103&package_id=112604 )
-Choose there the topmost latest version and the files
-kdepim_X.X.X_for_Windows.zip
-Such that the files to download is
-kdepim_X.X.X_for_Windows.zip
-
-To download c)
-Please choose there package/project/file:
-general Files for KDE/Pim
-Needed Windows Dlls
-kdepimdll.zip
-
-(Direct link: http://sourceforge.net/project/showfiles.php?group_id=104103&package_id=122438&release_id=256700 )
-Choose there the file:
-kdepimdll.zip
-
-Now you have downloaded the files
-
-kdepim_X.X.X_for_Windows.zip
-kdepimdll.zip
-
-and we can continue to install the files, which is simply unzipping them.
-
-
-****************************************
-4) How to install the migration tools
-****************************************
-
-You have downloaded the files
-
-kdepim_X.X.X_for_Windows.zip
-kdepimdll.zip
-
-Unzip these files.
-Now choose an arbitrary installation directory, where to copy all the needed files together.
-You should have now the following files and the directory "kdepim" in the same directory:
-kopi.exe
-kapi.exe
-microkabc_dir.dll
-microkabc_file.dll
-msvcr71.dll
-mfc71u.dll
-qt-mt331.dll
-ReadMich.txt
-kdepim (directory)
-
-The directory "kdepim" should contain subdirectories
-kaddressbook
-korganizer
-which itself contain some subdirectories with icons and help text.
-
-Now the migration tools are ready for use.
-
-
-NOTE AND HINT for performing migration on many workstations:
-Just burn the content of the installation dir on a CD.
-Then you can put the CD in every workstation and execute the migration tools from that CD directly.
-
-
-*************************************************************
-5) How to get the contact data out of Outlook200X
-*************************************************************
-
-Note: When accessing Outlook to read the data, it should not be possible, that there is any data lost in Outlook, because the progam accesses Outlook only Read-Only.
-
-You have the file
-kapi.exe
-and the other needed files accessable on your workstation.
-
-Getting the contact data
-
-Please start kapi.exe.
-Choose menu:
-File - Import - Import from Outlook...
-You will get a dialog which shows all "Personal Folders" of Outlook.
-Choose the Contact Folder(s) you want to import and select them with a hook.
-(All other folder but the contact containing folders are shown, but disabled).
-(If the data you want to import is not stored in one of the shown folders,
-please read step 2.) and click on "close" ).
-Click the "import" button.
-Now Outlook asks you to allow access to the contact data.
-Select "Allow access" amd click "Yes" in this dialog.
-Now the importing is performed and KA/Pi will show a progress bar.
-After importing, KA/Pi shows a dialog, how much contacts are imported.
-If you press a second time "import" , already imported contacts are not imported again.
-After importing you can choose another "Contact Folder" to import or close the import dialog.
-Please close the import dialog.
-Now you see the imported contacts in KA/Pi on the left in the list view.
-Please verify, that the import was correct.
-About problems of mapping particular Outlook-data-fields to KAdressbook-data-fields see Appendix A).
-
-Choose menu:
-File - Save
-and close KA/Pi.
-Now you should have the contact data in the file std.vcf in your home directory in the path
-(YOURHOMEDIR)\kdepim\apps\kabc\std.vcf
-
-Copy that file to a moveable disk or memory stick or just copy it via network to the destination.
-Import that file into KAddressbook/Kontact via Import - Import vcard.
-Details about importing you can read at: 7) How to import your contact data into Kontact
-
-Now you have your Outlook200X contact data on the KDE desktop available and you are done with the migration of contacts.
-
-*************************************************************
-6) How to get the calendar data out of Outlook200X
-*************************************************************
-
-Note: When accessing Outlook to read the data, it should not be possible, that there is any data lost in Outlook, because the progam accesses Outlook only Read-Only.
-
-You have the file
-kopi.exe
-and the other needed files accessable on your workstation.
-
-Getting the calendar data
-
-NOTE: Before extracting the calendar data, it is recommended to extract the contact data first.
-If you extract the contact data first, the identity (UID) of attendees of a meeting can be mapped correctly in the newly created appointments, such that you can access the attendee contact data later directly from KOrganizer.
-
-Please start kopi.exe.
-
-You will see a dialog, that you started KO/Pi for the first time and that the timezone configuration will be shown now. Confirm with "Ok".
-
-Now you will see the configuration dialog of KO/Pi.
-Please choose your timezone and adjust the daylight saving settings.
-The dialog shows defaults for CET (Central European Time), such that users located in central Europe simply can press "OK" in that dialog.
-(Note: Don't forget to set the timezone in KDE KOrganizer before importing data there. The timezone in KDE KOrganizer is set per default to UTC (GMT), that is -1h of CET).
-
-Now you will see the KO/Pi main window.
-Choose menu:
-File - Import from OL
-You will get a dialog which shows all "Personal Folders" of Outlook.
-Choose the Calendar Folder(s) you want to import and select them with a hook.
-(All other folder but the calendar data containing folders are shown, but disabled).
-(If the data you want to import is not stored in one of the shown folders,
-please read step 2.) and click on "close" ).
-Click the "import" button.
-Now Outllok asks you to allow access to the contact data.
-Select "Allow access" amd click "Yes" in this dialog.
-Now the importing is performed and KO/Pi will show a progress bar.
-After importing, KO/Pi shows a dialog, how much calendar items are imported.
-If you press a second time "import" , already imported calendar items are not imported again.
-After importing you can choose another "Calendar Folder" to import or close the import dialog.
-Please close the import dialog.
-Now you see the imported calendar items in KO/Pi.
-Please verify, that the import was correct.
-About problems of mapping particular Outlook-data-fields to KOrganizer-data-fields see Appendix B).
-Close KO/Pi - data will be saved automatically.
-
-Now you should have the calendar data in the file mycalendar.ics in your home directory in the path
-(YOURHOMEDIR)\kdepim\apps\korganizer\mycalendar.ics
-
-Copy that file to a moveable disk or memory stick or just copy it via network to the destination.
-Import that file into KOrganizer/Kontact.
-Details about importing your calendar data you can read at: 8) How to import your calendar data into Kontact.
-(Warning again: Don't forget to set the timezone in KDE KOrganizer before importing data there. The timezone in KDE KOrganizer is set per default to UTC (GMT), that is -1h of CET).
-Now you have your Outlook200X calendar data on the KDE desktop available and you are done with the migration.
-
-Hint:
-If you want to use KO/Pi and KA/Pi on your windows desktop, you should read all the help information available in the KO/Pi Help menu. One Highlight of KO/Pi is the easy syncing with another *.ics file.
-(Information about syncing available in the KO/Pi help menu).
-Another hint:
-KO/Pi + KA/Pi ( = KDE-Pim/Pi ) are available for the Sharp Zaurus PDA.
-Syncing data works for KO/Pi ( version 1.9.3) but not yet for KA/Pi.
-
-
-*************************************************************
-7) How to import your contact data into Kontact
-*************************************************************
-
-We want to import and upload our contacts to a Kolab server.
-You should have access to a properly configured Kolab client.
-This Kolab client is Kontact in KDE.
-Make sure, you have the needed IMAP resources configured in KAddressbook.
-To configure IMAP resources, you should do:
-
- Open KDE control center, choose there
- KDE Components - KDE Resource Configuration
- Choose there:
- Resources: contact
- and then:
- Add...
- IMAP
-
-Now start Kontact and select the Contacts icon on the left side.
-Choose menu:
-File... - Import - Import VCard...
-Select the imap resource as destination of the import
-and choose the file to import.
-Now the contacts should be imported and you are done.
-
-Don't forget to sync the IMAP account to upload to contacts to the server.
-
-*************************************************************
-8) How to import your calendar data into Kontact
-*************************************************************
-
-We want to import and upload our calendar data to a Kolab server.
-You should have access to a properly configured Kolab client.
-This Kolab client is Kontact in KDE.
-Make sure, you have the needed IMAP resources configured in KOrganizer.
-To configure IMAP resources, you should do:
-
- Open KDE control center, choose there
- KDE Components - KDE Resource Configuration
- Choose there:
- Resources: calendar
- and then:
- Add...
- Calendar on IMAP-server via KMail
-
-Now start Kontact and select the Calendar icon on the left side.
-Choose menu:
-File... - Import - Merge Calendar...
-Select the imap resource as destination of the import
-and choose the file to import.
-Now the calendar data should be imported and you are done.
-
-Don't forget to sync the IMAP account to upload the calendar data to the server.
-
-*************************************************************
-APPENDIX A) Problems and solutions when reading contact data
-*************************************************************
-
-All data, which can be displayed and accessed in KAddressbook is imported from Outlook.
-
-1) Addresses
-
-In Outlook you can assign an attribute "This is the mailing address" to one of the addresses.
-This address shows up in KAddressbook twice.
-The first time with the original attribute from Outlook ( e.g. "work" for "business" in OL ).
-The second time with the attribute "postal".
-
-2) Telephone Numbers
-
-All telephone numbers of OL are imported.
-OL offers special case telephone numbers, like "Assistant", which have no counterpart in KAdressbook.
-In that case, the imported number has special combined attributes in KAddressbook.
-Here is the mapping of types in OL to attributes in KA:
-
-OL type Attributes in KA
-
-Assistant Work + Voice
-Business Work
-Business2 Work
-BusinessFax Work + Fax
-Car Car
-Home Home
-Home2 Home
-HomeFax Home + Fax
-ISDN Isdn
-Mobile Cell (displayed as Mobile Phone)
-OtherFax Fax
-OtherTelephone Voice
-Pager Pager
-PrimaryTelephone Pref ( displayed as typeless, with attribute preferred )
-TTYTDD Modem
-Telex Fax + Bbs (Bbs displayed as MailBox - not very senseful, sorry ...)
-CompanyMain Work + Pref
-Radio Video
-Callback Voice + Pref
-
-Some mapping may not be very senseful, but it helps to identify the original OL types.
-
-3) Additional fields
-
-For some contact fields in Outlook there is no corresponding field in KAddressbook.
-The following contact fields are imported to KAddressbook and the field name and content is
-prepended the notes information of the contact item in the notes field.
-The following fields of Outlook are mapped to the notes field:
-Language, Hobby, Homepage, Billing information, Customer ID, User1, User2, User3, User4
-
-Example:
-+++++++++++++++++++++++++++
-Additonal fields created
-by KA/Pi Outlook import:
-Language: Swedish
-Hobby: Golf,fishing
-End additonal fields created
-by KA/Pi Outlook import!
-+++++++++++++++++++++++++++
-<Below that are your notes of this contact>
-
-
-*************************************************************
-APPENDIX B) Problems and solutions when reading calendar data
-*************************************************************
-
-Almost all data, which can be displayed and accessed in KOrganizer is imported from Outlook.
-Attachments of appointments are not imported.
-KOrganizer may crash, when reading some kinds of attachments.
-These may be changed in future versions.
-
-Attendee lists of meetings and their state are imported in KOrganizer.
-
-A problem is importing some kinds of recurring events:
-
-First problem:
-OL offers a recurrence like
-- Yearly recurrence, every second Tuesday of July.
-KOrganizer ( in versions < 3.3.0 ) does not offer that kind of recurrence.
-Such that
-"Yearly recurrence, every second Tuesday of July."
-is converted to
-"Monthly recurrence, every 12. month, second Tuesday in month, StartMonth = July."
-which can be edited in KO.
-
-Second problem:
-OL offers an exception in a recurrence with other data/time.
-KO offers only an exception in a recurrence , where the exception is deleted from the row of all occurences.
-Such that
-"Recurring event with exception, that date XX should be at date YY"
-in OL is converted to two events in KO:
-"Recurring event with exception, that date XX is not included"
-"Non-recurring event at date YY with same data like the recurring event (e.g. Summary, location, attendee list, ...)"
-
-
-
-
-
-
-
-
-
+
+Migration HowTo Outlook 200X -> KDE
+
+Version 1.0.5
+The latest version of this file can be downloaded from
+http://sourceforge.net/projects/kdepimpi/
+Please choose there package/project/file:
+general Files for KDE/Pim
+MigrationHowTo_OL2KDE
+MigrationHowTo_OL2KDE.txt.zip
+
+
+This HowTo describes the process of migrating data ( contact and calendar data ) from Outlook 98/200X (TM) to the PIM programs of the KDE-Desktop-Environment.
+We will call Outlook as OL in this document.
+The PIM programs are KAdddressbook and KOrganizer, which may be used embedded in the Kontact PIM management framework.
+This HowTo describes version 1.9.5b of the migration tools.
+The migration tools are the platform independent versions of KAdddressbook and KOrganizer: KAdddressbook/Pi and KOrganizer/Pi.
+If you want to migrate emails, you can do that via an IMAP server.
+A Kolab server is an IMAP server.
+A HowTo how to migrate emails and contact and calendar data to a Kolab server using the Toltec (TM) Outlook(TM) plugin is available as well.
+You can found it on
+http://sourceforge.net/projects/kdepimpi/
+Please choose there package/project/file:
+general Files for KDE/Pim
+MigrationHowTo_OL2KDE
+MigrationHowTo_OL2Kolab.txt.zip
+
+Content:
+
+1) How to start
+2) How to import pst files in Outlook
+3) Where to get the migration tools
+4) How to install the migration tools
+5) How to get the contact data out of Outlook200X
+6) How to get the calendar data out of Outlook200X
+7) How to import your contact data into Kontact
+8) How to import your calendar data into Kontact
+
+APPENDIX A) Problems and solutions when reading contact data
+APPENDIX B) Problems and solutions when reading calendar data
+
+****************************************
+1) How to start
+****************************************
+
+For the migration we need the actual Outlook 200X data, which Outlook stores in *.pst files.
+Then we need an installed version of Outlook 200X to access these *.pst files.
+When we have an Outllook 200X running with all data accessable, we need the migration tools.
+
+If you have no Outlook200X installed please install the Outlook version, you need to a import your *.pst files.
+If you have an Outlook200X installed with no contact/calendar data available, and you have some *.pst files please continue with: 2) How to import pst files in Outlook.
+If you have a running Outlook200X already with contact/calendar data available, please continue with: 3) Where to get the migration tools.
+
+
+****************************************
+2) How to import pst files in Outlook
+****************************************
+
+To open a local *.pst file in Outlook2003, choose menu:
+File - Open - Outlook Data File ...
+Now the data included in this file is shown
+as folders of a newly added root folder in the Outlook folder view.
+This root folder is probably not accessable from
+the migration tools via OLE.
+To access data stored in one of the subfolders,
+copy this subfolder to a root folder,
+which can be accessed from the migration tools via OLE.
+(To know, which folder can be accessed, just perform 5.) or 6.) until
+you get the Oulook import dialog!)
+
+To copy it, right click on that subfolder and choose
+Copy "<subfoldername>"...
+in the popup menu.
+
+****************************************
+3) Where to get the migration tools
+****************************************
+
+The data migration is is performed with the Windows versions of KAdddressbook/Pi and KOrganizer/Pi.
+Pi stands for platform-independend - platform-independend because the same program is available for different platforms, like Windows, Linux desktop and Sharp-Zaurus PDA.
+Note: The Linux desktop versions of KOrganizer/Pi and KOrganizer/KDE-desktop are two different programs! You cannot use KOrganizer/Pi together with, or embedded in, the KDE-desktop environment. The same is valid for KAdddressbook/Pi.
+
+The programs you need for the migration are:
+a) KAdddressbook/Pi executeable + 2dlls + icons
+b) KOrganizer/Pi executeable + icons
+c) The Qt3 library qt-mt331.dll and the MSVC library msvcr71.dll and the MSVC library mfc71u.dll
+You can download all of them at:
+
+http://sourceforge.net/projects/kdepimpi/
+
+Download of a) and b)
+Please choose there package/project with name KDE/Pim
+(Direct link: http://sourceforge.net/project/showfiles.php?group_id=104103&package_id=112604 )
+Choose there the topmost latest version and the files
+kdepim_X.X.X_for_Windows.zip
+Such that the files to download is
+kdepim_X.X.X_for_Windows.zip
+
+To download c)
+Please choose there package/project/file:
+general Files for KDE/Pim
+Needed Windows Dlls
+kdepimdll.zip
+
+(Direct link: http://sourceforge.net/project/showfiles.php?group_id=104103&package_id=122438&release_id=256700 )
+Choose there the file:
+kdepimdll.zip
+
+Now you have downloaded the files
+
+kdepim_X.X.X_for_Windows.zip
+kdepimdll.zip
+
+and we can continue to install the files, which is simply unzipping them.
+
+
+****************************************
+4) How to install the migration tools
+****************************************
+
+You have downloaded the files
+
+kdepim_X.X.X_for_Windows.zip
+kdepimdll.zip
+
+Unzip these files.
+Now choose an arbitrary installation directory, where to copy all the needed files together.
+You should have now the following files and the directory "kdepim" in the same directory:
+kopi.exe
+kapi.exe
+microkabc_dir.dll
+microkabc_file.dll
+msvcr71.dll
+mfc71u.dll
+qt-mt331.dll
+ReadMich.txt
+kdepim (directory)
+
+The directory "kdepim" should contain subdirectories
+kaddressbook
+korganizer
+which itself contain some subdirectories with icons and help text.
+
+Now the migration tools are ready for use.
+
+
+NOTE AND HINT for performing migration on many workstations:
+Just burn the content of the installation dir on a CD.
+Then you can put the CD in every workstation and execute the migration tools from that CD directly.
+
+
+*************************************************************
+5) How to get the contact data out of Outlook200X
+*************************************************************
+
+Note: When accessing Outlook to read the data, it should not be possible, that there is any data lost in Outlook, because the progam accesses Outlook only Read-Only.
+
+You have the file
+kapi.exe
+and the other needed files accessable on your workstation.
+
+Getting the contact data
+
+Please start kapi.exe.
+Choose menu:
+File - Import - Import from Outlook...
+You will get a dialog which shows all "Personal Folders" of Outlook.
+Choose the Contact Folder(s) you want to import and select them with a hook.
+(All other folder but the contact containing folders are shown, but disabled).
+(If the data you want to import is not stored in one of the shown folders,
+please read step 2.) and click on "close" ).
+Click the "import" button.
+Now Outlook asks you to allow access to the contact data.
+Select "Allow access" amd click "Yes" in this dialog.
+Now the importing is performed and KA/Pi will show a progress bar.
+After importing, KA/Pi shows a dialog, how much contacts are imported.
+If you press a second time "import" , already imported contacts are not imported again.
+After importing you can choose another "Contact Folder" to import or close the import dialog.
+Please close the import dialog.
+Now you see the imported contacts in KA/Pi on the left in the list view.
+Please verify, that the import was correct.
+About problems of mapping particular Outlook-data-fields to KAdressbook-data-fields see Appendix A).
+
+Choose menu:
+File - Save
+and close KA/Pi.
+Now you should have the contact data in the file std.vcf in your home directory in the path
+(YOURHOMEDIR)\kdepim\apps\kabc\std.vcf
+
+Copy that file to a moveable disk or memory stick or just copy it via network to the destination.
+Import that file into KAddressbook/Kontact via Import - Import vcard.
+Details about importing you can read at: 7) How to import your contact data into Kontact
+
+Now you have your Outlook200X contact data on the KDE desktop available and you are done with the migration of contacts.
+
+*************************************************************
+6) How to get the calendar data out of Outlook200X
+*************************************************************
+
+Note: When accessing Outlook to read the data, it should not be possible, that there is any data lost in Outlook, because the progam accesses Outlook only Read-Only.
+
+You have the file
+kopi.exe
+and the other needed files accessable on your workstation.
+
+Getting the calendar data
+
+NOTE: Before extracting the calendar data, it is recommended to extract the contact data first.
+If you extract the contact data first, the identity (UID) of attendees of a meeting can be mapped correctly in the newly created appointments, such that you can access the attendee contact data later directly from KOrganizer.
+
+Please start kopi.exe.
+
+You will see a dialog, that you started KO/Pi for the first time and that the timezone configuration will be shown now. Confirm with "Ok".
+
+Now you will see the configuration dialog of KO/Pi.
+Please choose your timezone and adjust the daylight saving settings.
+The dialog shows defaults for CET (Central European Time), such that users located in central Europe simply can press "OK" in that dialog.
+(Note: Don't forget to set the timezone in KDE KOrganizer before importing data there. The timezone in KDE KOrganizer is set per default to UTC (GMT), that is -1h of CET).
+
+Now you will see the KO/Pi main window.
+Choose menu:
+File - Import from OL
+You will get a dialog which shows all "Personal Folders" of Outlook.
+Choose the Calendar Folder(s) you want to import and select them with a hook.
+(All other folder but the calendar data containing folders are shown, but disabled).
+(If the data you want to import is not stored in one of the shown folders,
+please read step 2.) and click on "close" ).
+Click the "import" button.
+Now Outllok asks you to allow access to the contact data.
+Select "Allow access" amd click "Yes" in this dialog.
+Now the importing is performed and KO/Pi will show a progress bar.
+After importing, KO/Pi shows a dialog, how much calendar items are imported.
+If you press a second time "import" , already imported calendar items are not imported again.
+After importing you can choose another "Calendar Folder" to import or close the import dialog.
+Please close the import dialog.
+Now you see the imported calendar items in KO/Pi.
+Please verify, that the import was correct.
+About problems of mapping particular Outlook-data-fields to KOrganizer-data-fields see Appendix B).
+Close KO/Pi - data will be saved automatically.
+
+Now you should have the calendar data in the file mycalendar.ics in your home directory in the path
+(YOURHOMEDIR)\kdepim\apps\korganizer\mycalendar.ics
+
+Copy that file to a moveable disk or memory stick or just copy it via network to the destination.
+Import that file into KOrganizer/Kontact.
+Details about importing your calendar data you can read at: 8) How to import your calendar data into Kontact.
+(Warning again: Don't forget to set the timezone in KDE KOrganizer before importing data there. The timezone in KDE KOrganizer is set per default to UTC (GMT), that is -1h of CET).
+Now you have your Outlook200X calendar data on the KDE desktop available and you are done with the migration.
+
+Hint:
+If you want to use KO/Pi and KA/Pi on your windows desktop, you should read all the help information available in the KO/Pi Help menu. One Highlight of KO/Pi is the easy syncing with another *.ics file.
+(Information about syncing available in the KO/Pi help menu).
+Another hint:
+KO/Pi + KA/Pi ( = KDE-Pim/Pi ) are available for the Sharp Zaurus PDA.
+Syncing data works for KO/Pi ( version 1.9.3) but not yet for KA/Pi.
+
+
+*************************************************************
+7) How to import your contact data into Kontact
+*************************************************************
+
+We want to import and upload our contacts to a Kolab server.
+You should have access to a properly configured Kolab client.
+This Kolab client is Kontact in KDE.
+Make sure, you have the needed IMAP resources configured in KAddressbook.
+To configure IMAP resources, you should do:
+
+ Open KDE control center, choose there
+ KDE Components - KDE Resource Configuration
+ Choose there:
+ Resources: contact
+ and then:
+ Add...
+ IMAP
+
+Now start Kontact and select the Contacts icon on the left side.
+Choose menu:
+File... - Import - Import VCard...
+Select the imap resource as destination of the import
+and choose the file to import.
+Now the contacts should be imported and you are done.
+
+Don't forget to sync the IMAP account to upload to contacts to the server.
+
+*************************************************************
+8) How to import your calendar data into Kontact
+*************************************************************
+
+We want to import and upload our calendar data to a Kolab server.
+You should have access to a properly configured Kolab client.
+This Kolab client is Kontact in KDE.
+Make sure, you have the needed IMAP resources configured in KOrganizer.
+To configure IMAP resources, you should do:
+
+ Open KDE control center, choose there
+ KDE Components - KDE Resource Configuration
+ Choose there:
+ Resources: calendar
+ and then:
+ Add...
+ Calendar on IMAP-server via KMail
+
+Now start Kontact and select the Calendar icon on the left side.
+Choose menu:
+File... - Import - Merge Calendar...
+Select the imap resource as destination of the import
+and choose the file to import.
+Now the calendar data should be imported and you are done.
+
+Don't forget to sync the IMAP account to upload the calendar data to the server.
+
+*************************************************************
+APPENDIX A) Problems and solutions when reading contact data
+*************************************************************
+
+All data, which can be displayed and accessed in KAddressbook is imported from Outlook.
+
+1) Addresses
+
+In Outlook you can assign an attribute "This is the mailing address" to one of the addresses.
+This address shows up in KAddressbook twice.
+The first time with the original attribute from Outlook ( e.g. "work" for "business" in OL ).
+The second time with the attribute "postal".
+
+2) Telephone Numbers
+
+All telephone numbers of OL are imported.
+OL offers special case telephone numbers, like "Assistant", which have no counterpart in KAdressbook.
+In that case, the imported number has special combined attributes in KAddressbook.
+Here is the mapping of types in OL to attributes in KA:
+
+OL type Attributes in KA
+
+Assistant Work + Voice
+Business Work
+Business2 Work
+BusinessFax Work + Fax
+Car Car
+Home Home
+Home2 Home
+HomeFax Home + Fax
+ISDN Isdn
+Mobile Cell (displayed as Mobile Phone)
+OtherFax Fax
+OtherTelephone Voice
+Pager Pager
+PrimaryTelephone Pref ( displayed as typeless, with attribute preferred )
+TTYTDD Modem
+Telex Fax + Bbs (Bbs displayed as MailBox - not very senseful, sorry ...)
+CompanyMain Work + Pref
+Radio Video
+Callback Voice + Pref
+
+Some mapping may not be very senseful, but it helps to identify the original OL types.
+
+3) Additional fields
+
+For some contact fields in Outlook there is no corresponding field in KAddressbook.
+The following contact fields are imported to KAddressbook and the field name and content is
+prepended the notes information of the contact item in the notes field.
+The following fields of Outlook are mapped to the notes field:
+Language, Hobby, Homepage, Billing information, Customer ID, User1, User2, User3, User4
+
+Example:
++++++++++++++++++++++++++++
+Additonal fields created
+by KA/Pi Outlook import:
+Language: Swedish
+Hobby: Golf,fishing
+End additonal fields created
+by KA/Pi Outlook import!
++++++++++++++++++++++++++++
+<Below that are your notes of this contact>
+
+
+*************************************************************
+APPENDIX B) Problems and solutions when reading calendar data
+*************************************************************
+
+Almost all data, which can be displayed and accessed in KOrganizer is imported from Outlook.
+Attachments of appointments are not imported.
+KOrganizer may crash, when reading some kinds of attachments.
+These may be changed in future versions.
+
+Attendee lists of meetings and their state are imported in KOrganizer.
+
+A problem is importing some kinds of recurring events:
+
+First problem:
+OL offers a recurrence like
+- Yearly recurrence, every second Tuesday of July.
+KOrganizer ( in versions < 3.3.0 ) does not offer that kind of recurrence.
+Such that
+"Yearly recurrence, every second Tuesday of July."
+is converted to
+"Monthly recurrence, every 12. month, second Tuesday in month, StartMonth = July."
+which can be edited in KO.
+
+Second problem:
+OL offers an exception in a recurrence with other data/time.
+KO offers only an exception in a recurrence , where the exception is deleted from the row of all occurences.
+Such that
+"Recurring event with exception, that date XX should be at date YY"
+in OL is converted to two events in KO:
+"Recurring event with exception, that date XX is not included"
+"Non-recurring event at date YY with same data like the recurring event (e.g. Summary, location, attendee list, ...)"
+
+
+
+
+
+
+
+
+
diff --git a/bin/Migration-HowToOL2Kolab.txt b/bin/Migration-HowToOL2Kolab.txt
index 335997e..eef5ab8 100644
--- a/bin/Migration-HowToOL2Kolab.txt
+++ b/bin/Migration-HowToOL2Kolab.txt
@@ -1,203 +1,203 @@
-Version 1.0.0
-The latest version of this file can be downloaded from
-http://sourceforge.net/projects/kdepimpi/
-Please choose there package/project/file:
-general Files for KDE/Pim
-MigrationHowTo_OL2KDE
-MigrationHowTo_OL2Kolab.txt.zip
-
-
-This HowTo describes the process of migrating data
-( emails, contacts and calendar data )
-from Outlook 98/200X (TM) to a Kolab server.
-We will call Outlook as OL in this document.
-You will need an IMAP server for migrating emails.
-The Kolab server is an IMAP server.
-We will describe how the PIM data ( contact and calendar data )
-of OL can be migrated using the Toltec (TM) connector.
-Migration of the OL contact and calendar data to KDE
-(and using the Kolab server from KDE with the KDE Groupware client Kontact)
-can be done without using the Toltec Outlook connector.
-It can be done by using migration tools.
-You can found the HowTo using the migration tools on
-http://sourceforge.net/projects/kdepimpi/
-Please choose there package/project/file:
-general Files for KDE/Pim
-MigrationHowTo_OL2KDE
-MigrationHowTo_OL2KDE.txt.zip
-
-Content:
-
-1) How to start
-2) How to import pst files in Outlook
-3) Choose the migration strategie
-4) How to copy the contact data in OL to the Kolab server.
-5) How to copy the calendar data in OL to the Kolab server.
-6) How to copy the email in OL to the Kolab server.
-
-****************************************
-1) How to start
-****************************************
-
-For the migration we need the actual OL data, which Outlook stores in *.pst files.
-Then we need an installed version of OL to access these *.pst files.
-
-We assume, that we have an OL version installed that manages emails, contacts and calendar data.
-
-If you have no OL installed please install the Outlook version, you need to a import your *.pst files.
-If you have an OL installed with no email/contact/calendar data available, and you have some *.pst files please continue with: 2) How to import pst files in Outlook.
-If you have a running Outlook200X already with contact/calendar data available,
-please continue with: 3) Choose the migration strategie.
-
-****************************************
-2) How to import pst files in Outlook
-****************************************
-
-To open a local *.pst file in Outlook2003, choose menu:
-File - Open - Outlook Data File ...
-Now the data included in this file is shown
-as folders of a newly added root folder in the Outlook folder view.
-This root folder is probably not accessable from
-the migration tools via OLE.
-To access data stored in one of the subfolders,
-copy this subfolder to a root folder,
-which can be accessed from the migration tools via OLE.
-(To know, which folder can be accessed, just perform 5.) or 6.) until
-you get the Oulook import dialog!)
-
-To copy it, right click on that subfolder and choose
-Copy "<subfoldername>"...
-in the popup menu.
-
-****************************************
-3) Choose the migration strategie
-****************************************
-
-We assume, that we have an OL version installed that manages emails, contact and calendar data.
-
-The goal is it to get the emails, contacts and calendar data of OL on a Kolab server.
-
-After having the data on the Kolab server, we have two choices:
-
-(A) Accessing the server from KDE with the KDE-Kolab Client Kontact.
-(B) Accessing the server from Windows XP Outlook 2003 with Toltec Connector.
-
-Such that do have two strategies for the migration:
-
- (i)
- Use the Toltec Connector for migrating the contact
- and calendar data.
- Moving the email in OL to the Kolab server.
-
- This can be used for (A) and (B).
- Doing this for (A) might involve installing
- the Toltec Connector on the source platform
- syncing everything freshly on the Kolab Server and then
- just continue using the KDE client on the new data.
-
- (ii)
- Use the migration tools for migrating the contact
- and calendar data.
- Moving the email in OL to the Kolab server.
-
- Doing this for (A), there is no need to install the
- Toltec Connector on the source platform.
-
-
-
- *** Choosing (A) and (ii)
-
-If you choose (A) and (ii), please read
-6) How to copy the email in OL to the Kolab server.
-You can found the HowTo using the migration tools on
-http://sourceforge.net/projects/kdepimpi/
-Please choose there package/project/file:
-general Files for KDE/Pim
-MigrationHowTo_OL2KDE
-MigrationHowTo_OL2KDE.txt.zip
-
- *** Choosing (B) and (i) or
- (A) and (i)
-
-If you choose (B) and (i) or if you choose (A) and (i),
-please upgrade to QL XP and install the
-Toltec Connector. After that, please read
-4) How to copy the contact data in OL to the Kolab server.
-5) How to copy the calendar data in OL to the Kolab server.
-6) How to copy the email in OL to the Kolab server.
-
-
-************************************************************
-4) How to copy the contact data in OL to the Kolab server.
-************************************************************
-
-We assume that you have the Toltec Connector installed and that
-you have configured it to access the Kolab server.
-
-Select the contacts you want to copy.
-If you want to select all contacts of a folder,
-select the topleft entry, scroll to the right,
-hold the SHIFT key down and click on the rightbottom entry.
-Now all contact of the folder should be selected.
-Now choose
-Menu: Edit - Copy to folder.
-Choose your destination folder in the Toltec Connector folder and click OK.
-
-After that, sync your Toltec Connector folder with the server.
-
-
-************************************************************
-5) How to copy the calendar data in OL to the Kolab server.
-************************************************************
-
-We assume that you have the Toltec Connector installed and that
-you have configured it to access the Kolab server.
-Select the calendar folder you want to copy to the server.
-Right click on it - a popup menu pops up.
-Choose "Advanced find" in this menu.
-An "Advanced find" dialog pops up. Fill out nothing in this dialog,
-click on the button "Find now".
-As the search result, you will get all entries of that folder.
-Select now the calendar data, you want to copy.
-If you want to select all calendar data of this folder,
-select the topmost entry, scroll to the bottom,
-hold the SHIFT key down and click on the bottom entry.
-Now all contact of the folder should be selected.
-Now choose in the "Advanced find" dialog the
-Menu: Edit - Copy to folder.
-Choose your destination folder in the Toltec Connector folder and click OK.
-
-After that, sync your Toltec Connector folder with the server.
-
-
-************************************************************
-6) How to copy the email in OL to the Kolab server.
-************************************************************
-
-Note:
-There is no need to have the Toltec Connector installed to move/copy
-mails with Outlook to an IMAP server.
-
-We assume that there is already the IMAP account on the Kolab server
-configured in OL.
-You will see there a folder Inbox. (And maybe other folders).
-These folder may contain the subfolders "Calendar", "Tasks", "Journal" and Notes.
-These folders are used by the Kolab Groupware client,
-DO NOT COPY ordinary emails to this folders!
-
-If you do not want to copy your emails in the "Inbox",
-please create another folder on the server.
-
-Now select your folder with the emails, you want to copy.
-
-Select there the emails, you want to copy.
-If you want to select all emails of this folder,
-select the topmost entry, scroll to the bottom,
-hold the SHIFT key down and click on the bottom entry.
-Now all emails of the folder should be selected.
-Now choose the
-Menu: Edit - Copy to folder.
-Choose your destination folder in the IMAP Kolab server account and click on OK.
-After that, sync your IMAP Kolab server account with the server.
-
-
+Version 1.0.0
+The latest version of this file can be downloaded from
+http://sourceforge.net/projects/kdepimpi/
+Please choose there package/project/file:
+general Files for KDE/Pim
+MigrationHowTo_OL2KDE
+MigrationHowTo_OL2Kolab.txt.zip
+
+
+This HowTo describes the process of migrating data
+( emails, contacts and calendar data )
+from Outlook 98/200X (TM) to a Kolab server.
+We will call Outlook as OL in this document.
+You will need an IMAP server for migrating emails.
+The Kolab server is an IMAP server.
+We will describe how the PIM data ( contact and calendar data )
+of OL can be migrated using the Toltec (TM) connector.
+Migration of the OL contact and calendar data to KDE
+(and using the Kolab server from KDE with the KDE Groupware client Kontact)
+can be done without using the Toltec Outlook connector.
+It can be done by using migration tools.
+You can found the HowTo using the migration tools on
+http://sourceforge.net/projects/kdepimpi/
+Please choose there package/project/file:
+general Files for KDE/Pim
+MigrationHowTo_OL2KDE
+MigrationHowTo_OL2KDE.txt.zip
+
+Content:
+
+1) How to start
+2) How to import pst files in Outlook
+3) Choose the migration strategie
+4) How to copy the contact data in OL to the Kolab server.
+5) How to copy the calendar data in OL to the Kolab server.
+6) How to copy the email in OL to the Kolab server.
+
+****************************************
+1) How to start
+****************************************
+
+For the migration we need the actual OL data, which Outlook stores in *.pst files.
+Then we need an installed version of OL to access these *.pst files.
+
+We assume, that we have an OL version installed that manages emails, contacts and calendar data.
+
+If you have no OL installed please install the Outlook version, you need to a import your *.pst files.
+If you have an OL installed with no email/contact/calendar data available, and you have some *.pst files please continue with: 2) How to import pst files in Outlook.
+If you have a running Outlook200X already with contact/calendar data available,
+please continue with: 3) Choose the migration strategie.
+
+****************************************
+2) How to import pst files in Outlook
+****************************************
+
+To open a local *.pst file in Outlook2003, choose menu:
+File - Open - Outlook Data File ...
+Now the data included in this file is shown
+as folders of a newly added root folder in the Outlook folder view.
+This root folder is probably not accessable from
+the migration tools via OLE.
+To access data stored in one of the subfolders,
+copy this subfolder to a root folder,
+which can be accessed from the migration tools via OLE.
+(To know, which folder can be accessed, just perform 5.) or 6.) until
+you get the Oulook import dialog!)
+
+To copy it, right click on that subfolder and choose
+Copy "<subfoldername>"...
+in the popup menu.
+
+****************************************
+3) Choose the migration strategie
+****************************************
+
+We assume, that we have an OL version installed that manages emails, contact and calendar data.
+
+The goal is it to get the emails, contacts and calendar data of OL on a Kolab server.
+
+After having the data on the Kolab server, we have two choices:
+
+(A) Accessing the server from KDE with the KDE-Kolab Client Kontact.
+(B) Accessing the server from Windows XP Outlook 2003 with Toltec Connector.
+
+Such that do have two strategies for the migration:
+
+ (i)
+ Use the Toltec Connector for migrating the contact
+ and calendar data.
+ Moving the email in OL to the Kolab server.
+
+ This can be used for (A) and (B).
+ Doing this for (A) might involve installing
+ the Toltec Connector on the source platform
+ syncing everything freshly on the Kolab Server and then
+ just continue using the KDE client on the new data.
+
+ (ii)
+ Use the migration tools for migrating the contact
+ and calendar data.
+ Moving the email in OL to the Kolab server.
+
+ Doing this for (A), there is no need to install the
+ Toltec Connector on the source platform.
+
+
+
+ *** Choosing (A) and (ii)
+
+If you choose (A) and (ii), please read
+6) How to copy the email in OL to the Kolab server.
+You can found the HowTo using the migration tools on
+http://sourceforge.net/projects/kdepimpi/
+Please choose there package/project/file:
+general Files for KDE/Pim
+MigrationHowTo_OL2KDE
+MigrationHowTo_OL2KDE.txt.zip
+
+ *** Choosing (B) and (i) or
+ (A) and (i)
+
+If you choose (B) and (i) or if you choose (A) and (i),
+please upgrade to QL XP and install the
+Toltec Connector. After that, please read
+4) How to copy the contact data in OL to the Kolab server.
+5) How to copy the calendar data in OL to the Kolab server.
+6) How to copy the email in OL to the Kolab server.
+
+
+************************************************************
+4) How to copy the contact data in OL to the Kolab server.
+************************************************************
+
+We assume that you have the Toltec Connector installed and that
+you have configured it to access the Kolab server.
+
+Select the contacts you want to copy.
+If you want to select all contacts of a folder,
+select the topleft entry, scroll to the right,
+hold the SHIFT key down and click on the rightbottom entry.
+Now all contact of the folder should be selected.
+Now choose
+Menu: Edit - Copy to folder.
+Choose your destination folder in the Toltec Connector folder and click OK.
+
+After that, sync your Toltec Connector folder with the server.
+
+
+************************************************************
+5) How to copy the calendar data in OL to the Kolab server.
+************************************************************
+
+We assume that you have the Toltec Connector installed and that
+you have configured it to access the Kolab server.
+Select the calendar folder you want to copy to the server.
+Right click on it - a popup menu pops up.
+Choose "Advanced find" in this menu.
+An "Advanced find" dialog pops up. Fill out nothing in this dialog,
+click on the button "Find now".
+As the search result, you will get all entries of that folder.
+Select now the calendar data, you want to copy.
+If you want to select all calendar data of this folder,
+select the topmost entry, scroll to the bottom,
+hold the SHIFT key down and click on the bottom entry.
+Now all contact of the folder should be selected.
+Now choose in the "Advanced find" dialog the
+Menu: Edit - Copy to folder.
+Choose your destination folder in the Toltec Connector folder and click OK.
+
+After that, sync your Toltec Connector folder with the server.
+
+
+************************************************************
+6) How to copy the email in OL to the Kolab server.
+************************************************************
+
+Note:
+There is no need to have the Toltec Connector installed to move/copy
+mails with Outlook to an IMAP server.
+
+We assume that there is already the IMAP account on the Kolab server
+configured in OL.
+You will see there a folder Inbox. (And maybe other folders).
+These folder may contain the subfolders "Calendar", "Tasks", "Journal" and Notes.
+These folders are used by the Kolab Groupware client,
+DO NOT COPY ordinary emails to this folders!
+
+If you do not want to copy your emails in the "Inbox",
+please create another folder on the server.
+
+Now select your folder with the emails, you want to copy.
+
+Select there the emails, you want to copy.
+If you want to select all emails of this folder,
+select the topmost entry, scroll to the bottom,
+hold the SHIFT key down and click on the bottom entry.
+Now all emails of the folder should be selected.
+Now choose the
+Menu: Edit - Copy to folder.
+Choose your destination folder in the IMAP Kolab server account and click on OK.
+After that, sync your IMAP Kolab server account with the server.
+
+
diff --git a/bin/winicons/ka1.ico b/bin/winicons/ka1.ico
new file mode 100644
index 0000000..e8327f0
--- a/dev/null
+++ b/bin/winicons/ka1.ico
Binary files differ
diff --git a/bin/winicons/ka2.ico b/bin/winicons/ka2.ico
new file mode 100644
index 0000000..3c339cc
--- a/dev/null
+++ b/bin/winicons/ka2.ico
Binary files differ
diff --git a/bin/winicons/ko1.ico b/bin/winicons/ko1.ico
new file mode 100644
index 0000000..121eca0
--- a/dev/null
+++ b/bin/winicons/ko1.ico
Binary files differ
diff --git a/bin/winicons/ko2.ico b/bin/winicons/ko2.ico
new file mode 100644
index 0000000..ae787fe
--- a/dev/null
+++ b/bin/winicons/ko2.ico
Binary files differ