| -rw-r--r-- | qmake/tools/qdir.cpp | 1294 |
1 files changed, 1294 insertions, 0 deletions
diff --git a/qmake/tools/qdir.cpp b/qmake/tools/qdir.cpp new file mode 100644 index 0000000..418ea49 --- a/dev/null +++ b/qmake/tools/qdir.cpp @@ -0,0 +1,1294 @@ +/**************************************************************************** +** $Id$ +** +** Implementation of QDir class +** +** Created : 950427 +** +** Copyright (C) 1992-2002 Trolltech AS. All rights reserved. +** +** This file is part of the tools module of the Qt GUI Toolkit. +** +** This file may be distributed under the terms of the Q Public License +** as defined by Trolltech AS of Norway and appearing in the file +** LICENSE.QPL included in the packaging of this file. +** +** This file may be distributed and/or modified under the terms of the +** GNU General Public License version 2 as published by the Free Software +** Foundation and appearing in the file LICENSE.GPL included in the +** packaging of this file. +** +** Licensees holding valid Qt Enterprise Edition or Qt Professional Edition +** licenses may use this file in accordance with the Qt Commercial License +** Agreement provided with the Software. +** +** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE +** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. +** +** See http://www.trolltech.com/pricing.html or email sales@trolltech.com for +** information about Qt Commercial License Agreements. +** See http://www.trolltech.com/qpl/ for QPL licensing information. +** See http://www.trolltech.com/gpl/ for GPL licensing information. +** +** Contact info@trolltech.com if any conditions of this licensing are +** not clear to you. +** +**********************************************************************/ + +#include "qplatformdefs.h" +#include "qdir.h" + +#ifndef QT_NO_DIR +#include <private/qdir_p.h> +#include "qfileinfo.h" +#include "qregexp.h" +#include "qstringlist.h" +#include <stdlib.h> +#include <ctype.h> + + + +/*! + \class QDir + \brief The QDir class provides access to directory structures and their contents in a platform-independent way. + + \ingroup io + \mainclass + + A QDir is used to manipulate path names, access information + regarding paths and files, and manipulate the underlying file + system. + + A QDir can point to a file using either a relative or an absolute + path. Absolute paths begin with the directory separator "/" + (optionally preceded by a drive specification under Windows). If + you always use "/" as a directory separator, Qt will translate + your paths to conform to the underlying operating system. Relative + file names begin with a directory name or a file name and specify + a path relative to the current directory. + + The "current" path refers to the application's working directory. + A QDir's own path is set and retrieved with setPath() and path(). + + An example of an absolute path is the string "/tmp/quartz", a + relative path might look like "src/fatlib". You can use the + function isRelative() to check if a QDir is using a relative or an + absolute file path. Call convertToAbs() to convert a relative QDir + to an absolute one. For a simplified path use cleanDirPath(). To + obtain a path which has no symbolic links or redundant ".." + elements use canonicalPath(). The path can be set with setPath(), + and changed with cd() and cdUp(). + + QDir provides several static functions, for example, setCurrent() + to set the application's working directory and currentDirPath() to + retrieve the application's working directory. Access to some + common paths is provided with the static functions, current(), + home() and root() which return QDir objects or currentDirPath(), + homeDirPath() and rootDirPath() which return the path as a string. + + The number of entries in a directory is returned by count(). + Obtain a string list of the names of all the files and directories + in a directory with entryList(). If you prefer a list of QFileInfo + pointers use entryInfoList(). Both these functions can apply a + name filter, an attributes filter (e.g. read-only, files not + directories, etc.), and a sort order. The filters and sort may be + set with calls to setNameFilter(), setFilter() and setSorting(). + They may also be specified in the entryList() and + entryInfoList()'s arguments. + + Create a new directory with mkdir(), rename a directory with + rename() and remove an existing directory with rmdir(). Remove a + file with remove(). You can interrogate a directory with exists(), + isReadable() and isRoot(). + + To get a path with a filename use filePath(), and to get a + directory name use dirName(); neither of these functions checks + for the existence of the file or directory. + + The list of root directories is provided by drives(); on Unix + systems this returns a list containing one root directory, "/"; on + Windows the list will usually contain "C:/", and possibly "D:/", + etc. + + If you need the path in a form suitable for the underlying + operating system use convertSeparators(). + + Examples: + + See if a directory exists. + \code + QDir d( "example" ); // "./example" + if ( !d.exists() ) + qWarning( "Cannot find the example directory" ); + \endcode + + Traversing directories and reading a file. + \code + QDir d = QDir::root(); // "/" + if ( !d.cd("tmp") ) { // "/tmp" + qWarning( "Cannot find the \"/tmp\" directory" ); + } else { + QFile f( d.filePath("ex1.txt") ); // "/tmp/ex1.txt" + if ( !f.open(IO_ReadWrite) ) + qWarning( "Cannot create the file %s", f.name() ); + } + \endcode + + A program that lists all the files in the current directory + (excluding symbolic links), sorted by size, smallest first: + \code + #include <stdio.h> + #include <qdir.h> + + int main( int argc, char **argv ) + { + QDir d; + d.setFilter( QDir::Files | QDir::Hidden | QDir::NoSymLinks ); + d.setSorting( QDir::Size | QDir::Reversed ); + + const QFileInfoList *list = d.entryInfoList(); + QFileInfoListIterator it( *list ); + QFileInfo *fi; + + printf( " Bytes Filename\n" ); + while ( (fi = it.current()) != 0 ) { + printf( "%10li %s\n", fi->size(), fi->fileName().latin1() ); + ++it; + } + return 0; + } + \endcode +*/ + +/*! + Constructs a QDir pointing to the current directory. + + \sa currentDirPath() +*/ + +QDir::QDir() +{ + dPath = QString::fromLatin1("."); + init(); +} + +/*! + Constructs a QDir with path \a path, that filters its entries by + name using \a nameFilter and by attributes using \a filterSpec. It + also sorts the names using \a sortSpec. + + The default \a nameFilter is an empty string, which excludes + nothing; the default \a filterSpec is \c All, which also means + exclude nothing. The default \a sortSpec is \c Name|IgnoreCase, + i.e. sort by name case-insensitively. + + Example that lists all the files in "/tmp": + \code + QDir d( "/tmp" ); + for ( int i = 0; i < d.count(); i++ ) + printf( "%s\n", d[i] ); + \endcode + + If \a path is "" or QString::null, QDir uses "." (the current + directory). If \a nameFilter is "" or QString::null, QDir uses the + name filter "*" (all files). + + Note that \a path need not exist. + + \sa exists(), setPath(), setNameFilter(), setFilter(), setSorting() +*/ + +QDir::QDir( const QString &path, const QString &nameFilter, + int sortSpec, int filterSpec ) +{ + init(); + dPath = cleanDirPath( path ); + if ( dPath.isEmpty() ) + dPath = QString::fromLatin1("."); + nameFilt = nameFilter; + if ( nameFilt.isEmpty() ) + nameFilt = QString::fromLatin1("*"); + filtS = (FilterSpec)filterSpec; + sortS = (SortSpec)sortSpec; +} + +/*! + Constructs a QDir that is a copy of the directory \a d. + + \sa operator=() +*/ + +QDir::QDir( const QDir &d ) +{ + dPath = d.dPath; + fList = 0; + fiList = 0; + nameFilt = d.nameFilt; + dirty = TRUE; + allDirs = d.allDirs; + filtS = d.filtS; + sortS = d.sortS; +} + + +void QDir::init() +{ + fList = 0; + fiList = 0; + nameFilt = QString::fromLatin1("*"); + dirty = TRUE; + allDirs = FALSE; + filtS = All; + sortS = SortSpec(Name | IgnoreCase); +} + +/*! + Destroys the QDir frees up its resources. +*/ + +QDir::~QDir() +{ + delete fList; + delete fiList; +} + + +/*! + Sets the path of the directory to \a path. The path is cleaned of + redundant ".", ".." and of multiple separators. No check is made + to ensure that a directory with this path exists. + + The path can be either absolute or relative. Absolute paths begin + with the directory separator "/" (optionally preceded by a drive + specification under Windows). Relative file names begin with a + directory name or a file name and specify a path relative to the + current directory. An example of an absolute path is the string + "/tmp/quartz", a relative path might look like "src/fatlib". + + \sa path(), absPath(), exists(), cleanDirPath(), dirName(), + absFilePath(), isRelative(), convertToAbs() +*/ + +void QDir::setPath( const QString &path ) +{ + dPath = cleanDirPath( path ); + if ( dPath.isEmpty() ) + dPath = QString::fromLatin1("."); + dirty = TRUE; +} + +/*! + \fn QString QDir::path() const + + Returns the path, this may contain symbolic links, but never + contains redundant ".", ".." or multiple separators. + + The returned path can be either absolute or relative (see + setPath()). + + \sa setPath(), absPath(), exists(), cleanDirPath(), dirName(), + absFilePath(), convertSeparators() +*/ + +/*! + Returns the absolute path (a path that starts with "/" or with a + drive specification), which may contain symbolic links, but never + contains redundant ".", ".." or multiple separators. + + \sa setPath(), canonicalPath(), exists(), cleanDirPath(), + dirName(), absFilePath() +*/ + +QString QDir::absPath() const +{ + if ( QDir::isRelativePath(dPath) ) { + QString tmp = currentDirPath(); + if ( tmp.right(1) != QString::fromLatin1("/") ) + tmp += '/'; + tmp += dPath; + return cleanDirPath( tmp ); + } else { + return cleanDirPath( dPath ); + } +} + +/*! + Returns the name of the directory; this is \e not the same as the + path, e.g. a directory with the name "mail", might have the path + "/var/spool/mail". If the directory has no name (e.g. it is the + root directory) QString::null is returned. + + No check is made to ensure that a directory with this name + actually exists. + + \sa path(), absPath(), absFilePath(), exists(), QString::isNull() +*/ + +QString QDir::dirName() const +{ + int pos = dPath.findRev( '/' ); + if ( pos == -1 ) + return dPath; + return dPath.right( dPath.length() - pos - 1 ); +} + +/*! + Returns the path name of a file in the directory. Does \e not + check if the file actually exists in the directory. If the QDir is + relative the returned path name will also be relative. Redundant + multiple separators or "." and ".." directories in \a fileName + will not be removed (see cleanDirPath()). + + If \a acceptAbsPath is TRUE a \a fileName starting with a + separator "/" will be returned without change. If \a acceptAbsPath + is FALSE an absolute path will be prepended to the fileName and + the resultant string returned. + + \sa absFilePath(), isRelative(), canonicalPath() +*/ + +QString QDir::filePath( const QString &fileName, + bool acceptAbsPath ) const +{ + if ( acceptAbsPath && !isRelativePath(fileName) ) + return QString(fileName); + + QString tmp = dPath; + if ( tmp.isEmpty() || (tmp[(int)tmp.length()-1] != '/' && !!fileName && + fileName[0] != '/') ) + tmp += '/'; + tmp += fileName; + return tmp; +} + +/*! + Returns the absolute path name of a file in the directory. Does \e + not check if the file actually exists in the directory. Redundant + multiple separators or "." and ".." directories in \a fileName + will not be removed (see cleanDirPath()). + + If \a acceptAbsPath is TRUE a \a fileName starting with a + separator "/" will be returned without change. If \a acceptAbsPath + is FALSE an absolute path will be prepended to the fileName and + the resultant string returned. + + \sa filePath() +*/ + +QString QDir::absFilePath( const QString &fileName, + bool acceptAbsPath ) const +{ + if ( acceptAbsPath && !isRelativePath( fileName ) ) + return fileName; + + QString tmp = absPath(); + if ( tmp.isEmpty() || (tmp[(int)tmp.length()-1] != '/' && !!fileName && + fileName[0] != '/') ) + tmp += '/'; + tmp += fileName; + return tmp; +} + + +/*! + Returns \a pathName with the '/' separators converted to + separators that are appropriate for the underlying operating + system. + + On Windows, convertSeparators("c:/winnt/system32") returns + "c:\winnt\system32". + + The returned string may be the same as the argument on some + operating systems, for example on Unix. +*/ + +QString QDir::convertSeparators( const QString &pathName ) +{ + QString n( pathName ); +#if defined(Q_FS_FAT) || defined(Q_OS_OS2EMX) + for ( int i=0; i<(int)n.length(); i++ ) { + if ( n[i] == '/' ) + n[i] = '\\'; + } +#elif defined(Q_OS_MAC9) + while(n.length() && n[0] == '/' ) n = n.right(n.length()-1); + for ( int i=0; i<(int)n.length(); i++ ) { + if ( n[i] == '/' ) + n[i] = ':'; + } + if(n.contains(':') && n.left(1) != ':') + n.prepend(':'); +#endif + return n; +} + + +/*! + Changes the QDir's directory to \a dirName. + + If \a acceptAbsPath is TRUE a path starting with separator "/" + will cause the function to change to the absolute directory. If \a + acceptAbsPath is FALSE any number of separators at the beginning + of \a dirName will be removed and the function will descend into + \a dirName. + + Returns TRUE if the new directory exists and is readable; + otherwise returns FALSE. Note that the logical cd() operation is + not performed if the new directory does not exist. + + Calling cd( ".." ) is equivalent to calling cdUp(). + + \sa cdUp(), isReadable(), exists(), path() +*/ + +bool QDir::cd( const QString &dirName, bool acceptAbsPath ) +{ + if ( dirName.isEmpty() || dirName==QString::fromLatin1(".") ) + return TRUE; + QString old = dPath; + if ( acceptAbsPath && !isRelativePath(dirName) ) { + dPath = cleanDirPath( dirName ); + } else { + if ( !isRoot() ) { + dPath += '/'; + } else if ( dirName == ".." ) { + dPath = old; + return FALSE; + } + dPath += dirName; + if ( dirName.find('/') >= 0 + || old == QString::fromLatin1(".") + || dirName == QString::fromLatin1("..") ) + dPath = cleanDirPath( dPath ); + } + if ( !exists() ) { + dPath = old; // regret + return FALSE; + } + dirty = TRUE; + return TRUE; +} + +/*! + Changes directory by moving one directory up from the QDir's + current directory. + + Returns TRUE if the new directory exists and is readable; + otherwise returns FALSE. Note that the logical cdUp() operation is + not performed if the new directory does not exist. + + \sa cd(), isReadable(), exists(), path() +*/ + +bool QDir::cdUp() +{ + return cd( QString::fromLatin1("..") ); +} + +/*! + \fn QString QDir::nameFilter() const + + Returns the string set by setNameFilter() +*/ + +/*! + Sets the name filter used by entryList() and entryInfoList() to \a + nameFilter. + + The \a nameFilter is a wildcard (globbing) filter that understands + "*" and "?" wildcards. (See \link qregexp.html#wildcard-matching + QRegExp wildcard matching\endlink.) You may specify several filter + entries all separated by a single space " " or by a semi-colon + ";". + + For example, if you want entryList() and entryInfoList() to list + all files ending with either ".cpp" or ".h", you would use either + dir.setNameFilter("*.cpp *.h") or dir.setNameFilter("*.cpp;*.h"). + + \sa nameFilter(), setFilter() +*/ + +void QDir::setNameFilter( const QString &nameFilter ) +{ + nameFilt = nameFilter; + if ( nameFilt.isEmpty() ) + nameFilt = QString::fromLatin1("*"); + dirty = TRUE; +} + +/*! + \fn QDir::FilterSpec QDir::filter() const + + Returns the value set by setFilter() +*/ + +/*! + \enum QDir::FilterSpec + + This enum describes the filtering options available to QDir, e.g. + for entryList() and entryInfoList(). The filter value is specified + by OR-ing together values from the following list: + + \value Dirs List directories only. + \value Files List files only. + \value Drives List disk drives (ignored under Unix). + \value NoSymLinks Do not list symbolic links (ignored by operating + systems that don't support symbolic links). + \value All List directories, files, drives and symlinks (this does not list + broken symlinks unless you specify System). + \value TypeMask A mask for the the Dirs, Files, Drives and + NoSymLinks flags. + \value Readable List files for which the application has read access. + \value Writable List files for which the application has write access. + \value Executable List files for which the application has execute + access. Executables needs to be combined with Dirs or Files. + \value RWEMask A mask for the Readable, Writable and Executable flags. + \value Modified Only list files that have been modified (ignored + under Unix). + \value Hidden List hidden files (on Unix, files starting with a .). + \value System List system files (on Unix, FIFOs, sockets and + device files) + \value AccessMask A mask for the Readable, Writable, Executable + Modified, Hidden and System flags + \value DefaultFilter Internal flag. + + If you do not set any of \c Readable, \c Writable or \c + Executable, QDir will set all three of them. This makes the + default easy to write and at the same time useful. + + Examples: \c Readable|Writable means list all files for which the + application has read access, write access or both. \c Dirs|Drives + means list drives, directories, all files that the application can + read, write or execute, and also symlinks to such + files/directories. +*/ + + +/*! + Sets the filter used by entryList() and entryInfoList() to \a + filterSpec. The filter is used to specify the kind of files that + should be returned by entryList() and entryInfoList(). See + \l{QDir::FilterSpec}. + + \sa filter(), setNameFilter() +*/ + +void QDir::setFilter( int filterSpec ) +{ + if ( filtS == (FilterSpec) filterSpec ) + return; + filtS = (FilterSpec) filterSpec; + dirty = TRUE; +} + +/*! + \fn QDir::SortSpec QDir::sorting() const + + Returns the value set by setSorting() + + \sa setSorting() SortSpec +*/ + +/*! + \enum QDir::SortSpec + + This enum describes the sort options available to QDir, e.g. for + entryList() and entryInfoList(). The sort value is specified by + OR-ing together values from the following list: + + \value Name Sort by name. + \value Time Sort by time (modification time). + \value Size Sort by file size. + \value Unsorted Do not sort. + \value SortByMask A mask for Name, Time and Size. + + \value DirsFirst Put the directories first, then the files. + \value Reversed Reverse the sort order. + \value IgnoreCase Sort case-insensitively. + \value DefaultSort Internal flag. + + You can only specify one of the first four. + + If you specify both \c DirsFirst and \c Reversed, directories are + still put first, but in reverse order; the files will be listed + after the directories, again in reverse order. +*/ + +// ### Unsorted+DirsFirst ? Unsorted+Reversed? + +/*! + Sets the sort order used by entryList() and entryInfoList(). + + The \a sortSpec is specified by OR-ing values from the enum + \l{QDir::SortSpec}. + + \sa sorting() SortSpec +*/ + +void QDir::setSorting( int sortSpec ) +{ + if ( sortS == (SortSpec) sortSpec ) + return; + sortS = (SortSpec) sortSpec; + dirty = TRUE; +} + +/*! + \fn bool QDir::matchAllDirs() const + + Returns the value set by setMatchAllDirs() + + \sa setMatchAllDirs() +*/ + +/*! + If \a enable is TRUE then all directories are included (e.g. in + entryList()), and the nameFilter() is only applied to the files. + If \a enable is FALSE then the nameFilter() is applied to both + directories and files. + + \sa matchAllDirs() +*/ + +void QDir::setMatchAllDirs( bool enable ) +{ + if ( (bool)allDirs == enable ) + return; + allDirs = enable; + dirty = TRUE; +} + + +/*! + Returns the total number of directories and files that were found. + + Equivalent to entryList().count(). + + \sa operator[](), entryList() +*/ + +uint QDir::count() const +{ + return (uint)entryList().count(); +} + +/*! + Returns the file name at position \a index in the list of file + names. Equivalent to entryList().at(index). + + Returns a QString::null if the \a index is out of range or if the + entryList() function failed. + + \sa count(), entryList() +*/ + +QString QDir::operator[]( int index ) const +{ + entryList(); + return fList && index >= 0 && index < (int)fList->count() ? + (*fList)[index] : QString::null; +} + + +/*! + \obsolete + This function is included to easy porting from Qt 1.x to Qt 2.0, + it is the same as entryList(), but encodes the filenames as 8-bit + strings using QFile::encodedName(). + + It is more efficient to use entryList(). +*/ +QStrList QDir::encodedEntryList( int filterSpec, int sortSpec ) const +{ + QStrList r; + QStringList l = entryList(filterSpec,sortSpec); + for ( QStringList::Iterator it = l.begin(); it != l.end(); ++it ) { + r.append( QFile::encodeName(*it) ); + } + return r; +} + +/*! + \obsolete + \overload + This function is included to easy porting from Qt 1.x to Qt 2.0, + it is the same as entryList(), but encodes the filenames as 8-bit + strings using QFile::encodedName(). + + It is more efficient to use entryList(). +*/ +QStrList QDir::encodedEntryList( const QString &nameFilter, + int filterSpec, + int sortSpec ) const +{ + QStrList r; + QStringList l = entryList(nameFilter,filterSpec,sortSpec); + for ( QStringList::Iterator it = l.begin(); it != l.end(); ++it ) { + r.append( QFile::encodeName(*it) ); + } + return r; +} + + + +/*! + \overload + + Returns a list of the names of all the files and directories in + the directory, ordered in accordance with setSorting() and + filtered in accordance with setFilter() and setNameFilter(). + + The filter and sorting specifications can be overridden using the + \a filterSpec and \a sortSpec arguments. + + Returns an empty list if the directory is unreadable or does not + exist. + + \sa entryInfoList(), setNameFilter(), setSorting(), setFilter() +*/ + +QStringList QDir::entryList( int filterSpec, int sortSpec ) const +{ + if ( !dirty && filterSpec == (int)DefaultFilter && + sortSpec == (int)DefaultSort ) + return *fList; + return entryList( nameFilt, filterSpec, sortSpec ); +} + +/*! + Returns a list of the names of all the files and directories in + the directory, ordered in accordance with setSorting() and + filtered in accordance with setFilter() and setNameFilter(). + + The filter and sorting specifications can be overridden using the + \a nameFilter, \a filterSpec and \a sortSpec arguments. + + Returns an empty list if the directory is unreadable or does not + exist. + + \sa entryInfoList(), setNameFilter(), setSorting(), setFilter() +*/ + +QStringList QDir::entryList( const QString &nameFilter, + int filterSpec, int sortSpec ) const +{ + if ( filterSpec == (int)DefaultFilter ) + filterSpec = filtS; + if ( sortSpec == (int)DefaultSort ) + sortSpec = sortS; + QDir *that = (QDir*)this; // mutable function + if ( that->readDirEntries(nameFilter, filterSpec, sortSpec) ) { + if ( that->fList ) + return *that->fList; + } + return QStringList(); +} + +/*! + \overload + + Returns a list of QFileInfo objects for all the files and + directories in the directory, ordered in accordance with + setSorting() and filtered in accordance with setFilter() and + setNameFilter(). + + The filter and sorting specifications can be overridden using the + \a filterSpec and \a sortSpec arguments. + + Returns 0 if the directory is unreadable or does not exist. + + The returned pointer is a const pointer to a QFileInfoList. The + list is owned by the QDir object and will be reused on the next + call to entryInfoList() for the same QDir instance. If you want to + keep the entries of the list after a subsequent call to this + function you must copy them. + + \sa entryList(), setNameFilter(), setSorting(), setFilter() +*/ + +const QFileInfoList *QDir::entryInfoList( int filterSpec, int sortSpec ) const +{ + if ( !dirty && filterSpec == (int)DefaultFilter && + sortSpec == (int)DefaultSort ) + return fiList; + return entryInfoList( nameFilt, filterSpec, sortSpec ); +} + +/*! + Returns a list of QFileInfo objects for all the files and + directories in the directory, ordered in accordance with + setSorting() and filtered in accordance with setFilter() and + setNameFilter(). + + The filter and sorting specifications can be overridden using the + \a nameFilter, \a filterSpec and \a sortSpec arguments. + + Returns 0 if the directory is unreadable or does not exist. + + The returned pointer is a const pointer to a QFileInfoList. The + list is owned by the QDir object and will be reused on the next + call to entryInfoList() for the same QDir instance. If you want to + keep the entries of the list after a subsequent call to this + function you must copy them. + + \sa entryList(), setNameFilter(), setSorting(), setFilter() +*/ + +const QFileInfoList *QDir::entryInfoList( const QString &nameFilter, + int filterSpec, int sortSpec ) const +{ + if ( filterSpec == (int)DefaultFilter ) + filterSpec = filtS; + if ( sortSpec == (int)DefaultSort ) + sortSpec = sortS; + QDir *that = (QDir*)this; // mutable function + if ( that->readDirEntries(nameFilter, filterSpec, sortSpec) ) + return that->fiList; + else + return 0; +} + +/*! + \overload + + Returns TRUE if the \e directory exists; otherwise returns FALSE. + (If a file with the same name is found this function will return + FALSE). + + \sa QFileInfo::exists(), QFile::exists() +*/ + +bool QDir::exists() const +{ + QFileInfo fi( dPath ); + return fi.exists() && fi.isDir(); +} + +/*! + Returns TRUE if the directory path is relative to the current + directory and returns FALSE if the path is absolute (e.g. under + UNIX a path is relative if it does not start with a "/"). + + \sa convertToAbs() +*/ + +bool QDir::isRelative() const +{ + return isRelativePath( dPath ); +} + +/*! + Converts the directory path to an absolute path. If it is already + absolute nothing is done. + + \sa isRelative() +*/ + +void QDir::convertToAbs() +{ + dPath = absPath(); +} + +/*! + Makes a copy of QDir \a d and assigns it to this QDir. +*/ + +QDir &QDir::operator=( const QDir &d ) +{ + dPath = d.dPath; + delete fList; + fList = 0; + delete fiList; + fiList = 0; + nameFilt = d.nameFilt; + dirty = TRUE; + allDirs = d.allDirs; + filtS = d.filtS; + sortS = d.sortS; + return *this; +} + +/*! + \overload + + Sets the directory path to be the given \a path. +*/ + +QDir &QDir::operator=( const QString &path ) +{ + dPath = cleanDirPath( path ); + dirty = TRUE; + return *this; +} + + +/*! + \fn bool QDir::operator!=( const QDir &d ) const + + Returns TRUE if directory \a d and this directory have different + paths or different sort or filter settings; otherwise returns + FALSE. + + Example: + \code + // The current directory is "/usr/local" + QDir d1( "/usr/local/bin" ); + QDir d2( "bin" ); + if ( d1 != d2 ) qDebug( "They differ\n" ); // This is printed + \endcode +*/ + +/*! + Returns TRUE if directory \a d and this directory have the same + path and their sort and filter settings are the same; otherwise + returns FALSE. + + Example: + \code + // The current directory is "/usr/local" + QDir d1( "/usr/local/bin" ); + QDir d2( "bin" ); + d2.convertToAbs(); + if ( d1 == d2 ) qDebug( "They're the same\n" ); // This is printed + \endcode +*/ + +bool QDir::operator==( const QDir &d ) const +{ + return dPath == d.dPath && + nameFilt == d.nameFilt && + allDirs == d.allDirs && + filtS == d.filtS && + sortS == d.sortS; +} + + +/*! + Removes the file, \a fileName. + + If \a acceptAbsPath is TRUE a path starting with separator "/" + will remove the file with the absolute path. If \a acceptAbsPath + is FALSE any number of separators at the beginning of \a fileName + will be removed and the resultant file name will be removed. + + Returns TRUE if the file is removed successfully; otherwise + returns FALSE. +*/ + +bool QDir::remove( const QString &fileName, bool acceptAbsPath ) +{ + if ( fileName.isEmpty() ) { +#if defined(QT_CHECK_NULL) + qWarning( "QDir::remove: Empty or null file name" ); +#endif + return FALSE; + } + QString p = filePath( fileName, acceptAbsPath ); + return QFile::remove( p ); +} + +/*! + Checks for the existence of the file \a name. + + If \a acceptAbsPath is TRUE a path starting with separator "/" + will check the file with the absolute path. If \a acceptAbsPath is + FALSE any number of separators at the beginning of \a name will be + removed and the resultant file name will be checked. + + Returns TRUE if the file exists; otherwise returns FALSE. + + \sa QFileInfo::exists(), QFile::exists() +*/ + +bool QDir::exists( const QString &name, bool acceptAbsPath ) //### const in 4.0 +{ + if ( name.isEmpty() ) { +#if defined(QT_CHECK_NULL) + qWarning( "QDir::exists: Empty or null file name" ); +#endif + return FALSE; + } + QString tmp = filePath( name, acceptAbsPath ); + return QFile::exists( tmp ); +} + +/*! + Returns the native directory separator; "/" under UNIX (including + Mac OS X) and "\" under Windows. + + You do not need to use this function to build file paths. If you + always use "/", Qt will translate your paths to conform to the + underlying operating system. +*/ + +char QDir::separator() +{ +#if defined(Q_OS_UNIX) + return '/'; +#elif defined (Q_FS_FAT) || defined(Q_WS_WIN) + return '\\'; +#elif defined (Q_OS_MAC) + return ':'; +#else + return '/'; +#endif +} + +/*! + Returns the application's current directory. + + Use path() to access a QDir object's path. + + \sa currentDirPath(), QDir::QDir() +*/ + +QDir QDir::current() +{ + return QDir( currentDirPath() ); +} + +/*! + Returns the home directory. + + Under Windows the \c HOME environment variable is used. If this + does not exist the \c USERPROFILE environment variable is used. If + that does not exist the path is formed by concatenating the \c + HOMEDRIVE and \c HOMEPATH environment variables. If they don't + exist the rootDirPath() is used (this uses the \c SystemDrive + environment variable). If none of these exist "C:\" is used. + + Under non-Windows operating systems the \c HOME environment + variable is used if it exists, otherwise rootDirPath() is used. + + \sa homeDirPath() +*/ + +QDir QDir::home() +{ + return QDir( homeDirPath() ); +} + +/*! + Returns the root directory. + + \sa rootDirPath() drives() +*/ + +QDir QDir::root() +{ + return QDir( rootDirPath() ); +} + +/*! + \fn QString QDir::homeDirPath() + + Returns the absolute path of the user's home directory. + + \sa home() +*/ + +QStringList qt_makeFilterList( const QString &filter ) +{ + if ( filter.isEmpty() ) + return QStringList(); + + QChar sep( ';' ); + int i = filter.find( sep, 0 ); + if ( i == -1 && filter.find( ' ', 0 ) != -1 ) + sep = QChar( ' ' ); + + QStringList list = QStringList::split( sep, filter ); + QStringList::Iterator it = list.begin(); + QStringList list2; + + for ( ; it != list.end(); ++it ) { + QString s = *it; + list2 << s.stripWhiteSpace(); + } + return list2; +} + +/*! + \overload + + Returns TRUE if the \a fileName matches any of the wildcard (glob) + patterns in the list of \a filters; otherwise returns FALSE. + + (See \link qregexp.html#wildcard-matching QRegExp wildcard + matching.\endlink) + \sa QRegExp::match() +*/ + +bool QDir::match( const QStringList &filters, const QString &fileName ) +{ + QStringList::ConstIterator sit = filters.begin(); + while ( sit != filters.end() ) { +#if defined(Q_FS_FAT) && !defined(Q_OS_UNIX) + QRegExp rx( *sit, FALSE, TRUE ); // The FAT FS is not case sensitive.. +#else + QRegExp rx( *sit, TRUE, TRUE ); // ..while others are. +#endif + if ( rx.exactMatch(fileName) ) + return TRUE; + ++sit; + } + return FALSE; +} + +/*! + Returns TRUE if the \a fileName matches the wildcard (glob) + pattern \a filter; otherwise returns FALSE. The \a filter may + contain multiple patterns separated by spaces or semicolons. + + (See \link qregexp.html#wildcard-matching QRegExp wildcard + matching.\endlink) + \sa QRegExp::match() +*/ + +bool QDir::match( const QString &filter, const QString &fileName ) +{ + QStringList lst = qt_makeFilterList( filter ); + return match( lst, fileName ); +} + + +/*! + Removes all multiple directory separators "/" and resolves any + "."s or ".."s found in the path, \a filePath. + + Symbolic links are kept. This function does not return the + canonical path, but rather the simplest version of the input. + For example, "./local" becomes "local", "local/../bin" becomes + "bin" and "/local/usr/../bin" becomes "/local/bin". + + \sa absPath() canonicalPath() +*/ + +QString QDir::cleanDirPath( const QString &filePath ) +{ + QString name = filePath; + QString newPath; + + if ( name.isEmpty() ) + return name; + + slashify( name ); + + bool addedSeparator; + if ( isRelativePath(name) ) { + addedSeparator = TRUE; + name.insert( 0, '/' ); + } else { + addedSeparator = FALSE; + } + + int ePos, pos, upLevel; + + pos = ePos = name.length(); + upLevel = 0; + int len; + + while ( pos && (pos = name.findRev('/',--pos)) != -1 ) { + len = ePos - pos - 1; + if ( len == 2 && name.at(pos + 1) == '.' + && name.at(pos + 2) == '.' ) { + upLevel++; + } else { + if ( len != 0 && (len != 1 || name.at(pos + 1) != '.') ) { + if ( !upLevel ) + newPath = QString::fromLatin1("/") + + name.mid(pos + 1, len) + newPath; + else + upLevel--; + } + } + ePos = pos; + } + if ( addedSeparator ) { + while ( upLevel-- ) + newPath.insert( 0, QString::fromLatin1("/..") ); + if ( !newPath.isEmpty() ) + newPath.remove( 0, 1 ); + else + newPath = QString::fromLatin1("."); + } else { + if ( newPath.isEmpty() ) + newPath = QString::fromLatin1("/"); +#if defined(Q_FS_FAT) || defined(Q_OS_OS2EMX) + if ( name[0] == '/' ) { + if ( name[1] == '/' ) // "\\machine\x\ ..." + newPath.insert( 0, '/' ); + } else { + newPath = name.left(2) + newPath; + } +#endif + } + return newPath; +} + +int qt_cmp_si_sortSpec; + +#if defined(Q_C_CALLBACKS) +extern "C" { +#endif + +#ifdef Q_OS_TEMP +int __cdecl qt_cmp_si( const void *n1, const void *n2 ) +#else +int qt_cmp_si( const void *n1, const void *n2 ) +#endif +{ + if ( !n1 || !n2 ) + return 0; + + QDirSortItem* f1 = (QDirSortItem*)n1; + QDirSortItem* f2 = (QDirSortItem*)n2; + + if ( qt_cmp_si_sortSpec & QDir::DirsFirst ) + if ( f1->item->isDir() != f2->item->isDir() ) + return f1->item->isDir() ? -1 : 1; + + int r = 0; + int sortBy = qt_cmp_si_sortSpec & QDir::SortByMask; + + switch ( sortBy ) { + case QDir::Time: + r = f1->item->lastModified().secsTo(f2->item->lastModified()); + break; + case QDir::Size: + r = f2->item->size() - f1->item->size(); + break; + default: + ; + } + + if ( r == 0 && sortBy != QDir::Unsorted ) { + // Still not sorted - sort by name + bool ic = qt_cmp_si_sortSpec & QDir::IgnoreCase; + + if ( f1->filename_cache.isNull() ) + f1->filename_cache = ic ? f1->item->fileName().lower() + : f1->item->fileName(); + if ( f2->filename_cache.isNull() ) + f2->filename_cache = ic ? f2->item->fileName().lower() + : f2->item->fileName(); + + r = f1->filename_cache.compare(f2->filename_cache); + } + + if ( r == 0 ) { + // Enforce an order - the order the items appear in the array + r = (char*)n1 - (char*)n2; + } + + if ( qt_cmp_si_sortSpec & QDir::Reversed ) + return -r; + else + return r; +} + +#if defined(Q_C_CALLBACKS) +} +#endif + +#endif // QT_NO_DIR |