author | Michael Krelin <hacker@klever.net> | 2016-01-06 14:26:38 (UTC) |
---|---|---|
committer | Michael Krelin <hacker@klever.net> | 2016-01-06 14:26:43 (UTC) |
commit | 94802122c4888f77b4503c6e41d21406f03433c9 (patch) (side-by-side diff) | |
tree | c29dfedca01978f685ef9a0bac90111d796767f4 /delta.jscad | |
download | redelta-94802122c4888f77b4503c6e41d21406f03433c9.zip redelta-94802122c4888f77b4503c6e41d21406f03433c9.tar.gz redelta-94802122c4888f77b4503c6e41d21406f03433c9.tar.bz2 |
initial import
-rw-r--r-- | delta.jscad | 453 |
1 files changed, 453 insertions, 0 deletions
diff --git a/delta.jscad b/delta.jscad new file mode 100644 index 0000000..63eea6c --- a/dev/null +++ b/delta.jscad @@ -0,0 +1,453 @@ +var PRINT = { + layer_height: 0.2, + extrusion_width: 0.4, + + fit_tolerance: 0.4, + slide_tolerance: 0.2 +}; + +var CONFIG = { + hotend: { + h: 62.4, // full assembly height + groove: { d:12, h:6 }, // grove diameter and height + ungroove: { d:16, above:3.7, below: 3+4 } + }, + effector: { + h: 6, + o: 20, // offset to the rod mounts line + rods_apart: 40, + cone: { shell: 1, angle: Math.PI/6 }, + rodend: { + joint_w: 7, // thickness of the joint + screw_l: 20-1, // 20 with the head + screw_d: 3 + }, + hotend: { margin: 2 }, + hinge: { + d: 3, w: 5, margin: 2.5, + h: 1+(6+3.7)/2, // elevation + grove + top + e: 1 // elevation + }, + clamp: { + shell: 4.6, + d: 3, + margin: 2.5, + split: 0.6 + }, + mswitch: { + size: [ 19.8, 6, 10 ], + screw: { + d: 2, h: 10/2-2, + s: 1.3, // screw shell + o: [-9.5/2,9.5/2].map(function(x) { + return -19.8/2+x; + }) + }, + switch_x: 2.5 + }, + guide: { + width: 3, height: 5+1, length: 6 + }, + fanholder: { + r: 30, + screw: { d: 3, m: 2.5/*margin*/ }, + w: 3 + } + }, + nut: { h: 2.3, w: 5.5 } +}; + +var U = { + hypotenuse: function(a,b) { + return Math.sqrt(Math.pow(a,2)+Math.pow(b,2)); + }, + peek: function(x,m) { + console.log(x,m); + return x; + } +}; + +/* {h:,w:} */ +function nut(o) { + var rv = CSG.cylinder({ + start:[0,0,0],end:[0,0,o.h], + radius: o.w/2/Math.cos(Math.PI/6), + resolution: 6 + }); + rv.properties.axis_connector = new CSG.Connector([0,0,0],[0,0,1],[0,1,0]); + return rv; +} + +var E3DV6 = { + dimensions: { + big_d: 22.3, + + }, + heatsink: function() { + var fn = 16; + var z=0; + var unite = [ {d:16,h:3.7},{d:12,h:6},{d:16,h:3} ].map(function(x) { + return CSG.cylinder({ + start: [0,0,z], end: [0,0,z-=x.h], + radius: x.d/2, resolution: fn + }); + }); + unite.push(CSG.cylinder({ + start:[0,0,z-=1.5], end:[0,0,z-=1], + radius: 16/2, resolution: fn + })); + for(var i=0;i<11;++i) unite.push(CSG.cylinder({ + start:[0,0,z-=1.5], end:[0,0,z-=1], + radius: this.dimensions.big_d/2, resolution: fn + })); + unite.push(CSG.cylinder({ + start:[0,0,z], end: [0,0,-12.7], + radiusStart: 10/2, radiusEnd: 8.5/2, /* pretty arbitrary */ + resolution: fn + })); + var rv = union(unite); + rv = rv.subtract([CSG.cylinder({ + start:[0,0,1], end: [0,0,z-1], + radius: 4.2/2, resolution: fn + }),CSG.cylinder({ + start:[0,0,1], end: [0,0,-6.7/*somewhat arbitrary*/], + radius: 8/2, resolution: fn + }),CSG.cylinder({ + start:[0,0,z-1], end: [0,0,z+14.8], + radius: 6/2 /*M7*/, resolution: fn + })]); + rv.properties.pushfit_connector = new CSG.Connector([0,0,0],[0,0,-1],[1,0,0]); + rv.properties.heatbreak_connector = new CSG.Connector([0,0,z+14.8],[0,0,-1],[1,0,0]); + rv.properties.grove_connector = new CSG.Connector([0,0,-3.7-3],[0,0,1],[1,0,0]); + return rv.setColor([0.8,0.8,0.8,0.9]); + } +}; + +var EFFECTOR = { + /* {sd: screw diameter, l: cone length, s: screw shell, a: angle from axis} */ + cone: function effector_cone(o) { + var re = o.sd/2+o.s, rs = re+o.l*Math.tan(o.a||(Math.PI/4)); + var rv = CSG.cylinder({ + start: [0,0,0], end: [0,0,o.l], + radiusStart: rs, radiusEnd: re, + resolution: Math.floor(rs*2*2) + }).subtract(CSG.cylinder({ + start:[0,0,-1], end:[0,0,o.l+1], radius: o.sd, + //resolution: Math.floor(o.sd*2*2) + })); + rv.properties.top_connector = new CSG.Connector([0,0,o.l],[0,0,-1],[1,0,0]); + rv.properties.bottom_connector = new CSG.Connector([0,0,0],[0,0,1],[1,0,0]); + var nuthole = nut(CONFIG.nut); + rv = rv.subtract(nuthole.connectTo( + nuthole.properties.axis_connector, rv.properties.bottom_connector, + false, 0 + )); + return rv.intersect(CSG.cylinder({start:[0,0,0],end:[0,0,o.l],radius:6/*TODO:calculate*/})); + }, + platform_bb: function platform_bb() { + var e = CONFIG.effector; + var r = U.hypotenuse(e.rods_apart/2,e.o+e.rodend.screw_d/2+e.cone.shell); + var rv = CSG.sphere({ + center: [0,0,e.h/2], radius: r, + resolution: r*2*2 + }).intersect(CSG.cube({ + corner1: [-r,-r,0], corner2: [r,r,e.h] + })); + rv.properties.base_connector = new CSG.Connector([0,0,0],[0,0,1],[1,0,0]); + return rv; + }, + effector: function effector_effector() { + var e = CONFIG.effector; + var conel = e.rodend.screw_l-e.rodend.joint_w; + var nutr = CONFIG.nut.w/2/Math.cos(Math.PI/6); + var cone = this.cone({sd:e.rodend.screw_d/2,l:conel,s:e.cone.shell,a:e.cone.angle}); + var rcorner = U.hypotenuse(e.o-e.rodend.screw_d/2-e.cone.shell,e.rods_apart/2)-3.85; //XXX:config/calc + var ropen = E3DV6.dimensions.big_d/2+e.hotend.margin; + var rmount = this.rmount = (rcorner+ropen)/2; + var rv = []; + for(var a=0;a<360;a+=120) { + rv.push(union([-1,1].map(function(s) { + return cone.connectTo(cone.properties.top_connector, + new CSG.Connector([s*e.rods_apart/2,e.o,e.h/2],[-s,0,0],[0,0,1]), + false, 0); + })).union(CSG.cube({ + corner1:[e.rods_apart/2-conel+.1,e.o-nutr,0], + corner2:[-e.rods_apart/2+conel-.1, + -rcorner, + e.h] + })).rotateZ(a)); + } + rv.push(CSG.cylinder({ + start:[0,0,0], end:[0,0,e.h], + radius: U.hypotenuse(e.o-nutr,e.rods_apart/2-conel) + })); + rv = union(rv).intersect(this.platform_bb()).subtract(CSG.cylinder({ + start:[0,0,-1], end:[0,0,e.h+1], + radius: ropen, resolution: ropen*4 + })).subtract([/*0, probe here*/120,240].map(function(x) { /* nut pockets */ + return CSG.cube({ + corner1:[-CONFIG.nut.w/2,0,(e.h-CONFIG.nut.h)/2], + corner2:[CONFIG.nut.w/2,-rcorner-1,(e.h+CONFIG.nut.h)/2] + }).union(CSG.cylinder({ + start:[0,-rmount,-1], end:[0,-rmount,e.h+1], + radius: 3/2 // XXX: + })).subtract(CSG.cylinder({ + start:[0,-rmount,(e.h+CONFIG.nut.h)/2], + end:[0,-rmount,(e.h+CONFIG.nut.h)/2+PRINT.layer_height*3/2], + radius: 3/2+.1 + })).rotateZ(x); + })).subtract( CSG.cylinder({ // pulldown screw + start: [0,-rcorner+e.mswitch.size[1]+PRINT.extrusion_width+3/2/*XXX:conf*/,-1], + end: [0,-rcorner+e.mswitch.size[1]+PRINT.extrusion_width+3/2/*XXX:conf*/,e.h+1], + radius: 3/2+1 /*XXX: config */ + })).subtract( CSG.cylinder({ /* switch-screw */ + start: [e.mswitch.switch_x,-rcorner+e.mswitch.size[1]/2,-1], + end: [e.mswitch.switch_x,-rcorner+e.mswitch.size[1]/2,e.h+1], + radius: e.mswitch.screw.d/2 + })); + // add hinges + rv.properties.hinge_connector=new CSG.Properties(); + var hinges_apart=e.rods_apart/2-conel; + rv = rv.union([-1,1].map(function hinge(s) { + rv.properties.hinge_connector[s]=new CSG.Connector([s*hinges_apart,e.o,e.h+e.hinge.h],[s,0,0],[0,0,1]); + return CSG.cube({ + corner1: [s*hinges_apart,e.o-e.hinge.margin-e.hinge.d/2,e.h], + corner2: [s*(hinges_apart+e.hinge.w),e.o+e.hinge.margin+e.hinge.d/2,e.h+e.hinge.h] + }).union(CSG.cylinder({ + start: [s*hinges_apart,e.o,e.h+e.hinge.h], + end: [s*(hinges_apart+e.hinge.w),e.o,e.h+e.hinge.h], + radius: e.hinge.d/2+e.hinge.margin + })).subtract(CSG.cylinder({ + start: [s*(hinges_apart-1),e.o,e.h+e.hinge.h], + end: [s*(hinges_apart+e.hinge.w+1),e.o,e.h+e.hinge.h], + radius: e.hinge.d/2 + })); + })); + // add clamp guides + var cgrr = e.guide.width/3; + rv = rv.union([-1,1].map(function guide(s) { + return CSG.roundedCube({ + center: [s*(e.mswitch.size[0]+PRINT.slide_tolerance+e.guide.width)/2,-rcorner+e.guide.length/2,e.h+e.guide.height/2-cgrr], + radius: [e.guide.width/2,e.guide.length/2,e.guide.height/2+cgrr], + roundradius: cgrr + }).intersect(CSG.cube({ + center: [s*(e.mswitch.size[0]+PRINT.slide_tolerance+e.guide.width)/2,-rcorner+e.guide.length/2,e.h+e.guide.height/2], + radius: [e.guide.width/2,e.guide.length/2,e.guide.height/2+.1], + roundradius: cgrr + })); + })); + rv.properties.grove_connector = new CSG.Connector([0,0,e.h+e.hinge.e+6/2],[0,0,1],[1,0,0]); + rv.properties.rcorner = rcorner; + return rv.setColor([0.4,0.8,0.4,0.9]); + }, + hinged: function effector_hinged(o) { + var e = CONFIG.effector; + var conel = e.rodend.screw_l-e.rodend.joint_w; + var hinges_apart = e.rods_apart/2-conel; + var hhr = e.o-e.hinge.d/2-e.hinge.margin; // hotend holder radius + var hhh = CONFIG.hotend.groove.h+CONFIG.hotend.ungroove.above; + var rv = CSG.cylinder({ /* hinge */ + start: [-hinges_apart+PRINT.slide_tolerance,e.o,e.h+e.hinge.h], + end: [hinges_apart-PRINT.slide_tolerance,e.o,e.h+e.hinge.h], + radius: e.hinge.d/2+e.hinge.margin + }).union( /* lower hotend holder */ + CSG.cylinder({ + start: [0,0,e.h+e.hinge.e], end: [0,0,e.h+e.hinge.e+CONFIG.hotend.groove.h], + radius: hhr + }).subtract(CSG.cylinder({ + start: [0,0,e.h+e.hinge.e-1], end: [0,0,e.h+e.hinge.e+CONFIG.hotend.groove.h+1], + radius: CONFIG.hotend.groove.d/2 +PRINT.fit_tolerance + })) + ).union( /* upper hotend holder */ + CSG.cylinder({ + start: [0,0,e.h+e.hinge.e+CONFIG.hotend.groove.h], + end: [0,0,e.h+e.hinge.e+CONFIG.hotend.groove.h+CONFIG.hotend.ungroove.above], + radius: hhr + }).subtract(CSG.cylinder({ + start: [0,0,e.h+e.hinge.e+CONFIG.hotend.groove.h-1], + end: [0,0,e.h+e.hinge.e+CONFIG.hotend.groove.h+CONFIG.hotend.ungroove.above+1], + radius: CONFIG.hotend.ungroove.d/2 +PRINT.fit_tolerance + })) + ).union( /* connect mount with hinge */ + CSG.cube({ + corner1: [-hinges_apart+PRINT.slide_tolerance,CONFIG.hotend.ungroove.d/2+PRINT.fit_tolerance,e.h+e.hinge.e], + corner2: [hinges_apart-PRINT.slide_tolerance,e.o,e.h+e.hinge.h+e.hinge.d/2+e.hinge.margin] + }) + ).subtract( /* hinge screwhole */ + CSG.cylinder({ + start: [-hinges_apart-1,e.o,e.h+e.hinge.h], + end: [hinges_apart+1,e.o,e.h+e.hinge.h], + radius: e.hinge.d/2 + }) + ).union( /* hold clamp together */ + [-1,1].map(function(s) { + return CSG.roundedCube({ + corner1: [s*(-hhr-e.clamp.margin*2-e.clamp.d),-e.clamp.shell,e.h+e.hinge.e], + corner2: [s*(-CONFIG.hotend.ungroove.d/2-PRINT.fit_tolerance),+e.clamp.shell,e.h+e.hinge.e+hhh], + roundradius: 1.5 + }); + }) + ).subtract( /* screws for holding clamp */ + [-1,1].map(function(s) { + var nuthole = nut(CONFIG.nut); + var x = s*(-hhr-e.clamp.margin-e.clamp.d/2); + return CSG.cylinder({ + start: [x,-e.clamp.shell-1,e.h+e.hinge.e+hhh/2], + end: [x,e.clamp.shell+1,e.h+e.hinge.e+hhh/2], + radius: e.clamp.d/2 + }).union(nuthole.connectTo( + nuthole.properties.axis_connector, + new CSG.Connector([x,e.clamp.shell,e.h+e.hinge.e+hhh/2],[0,-1,0],[0,0,1]), + false, 0 + )).union(CSG.cylinder({ + start: [x,-e.clamp.shell-1,e.h+e.hinge.e+hhh/2], + end: [x,0,e.h+e.hinge.e+hhh/2], + radius: e.clamp.d/2+PRINT.slide_tolerance + })); + }) + ); + var ms = o.microswitch; + var msedge = o.effector.properties.rcorner; + var msh = 9.5; // microswitch holes apart + var mshh = Math.abs(ms.properties.switch_connector.point.z-ms.properties.screw_connector[0].point.z); // microswitch holes height + rv = rv.union(CSG.cube({ // connect clamp with microswitch + corner1: [-ms.properties.microswitch.size.x/2,-msedge+.1,e.h+e.hinge.e], + corner2: [+ms.properties.microswitch.size.x/2,-CONFIG.hotend.ungroove.d/2-PRINT.fit_tolerance,e.h+e.hinge.e+hhh] + })).union([-msh/2,msh/2].map(function(x) { // shell for microswitch screws + return CSG.roundedCylinder({ + start: [x,-CONFIG.hotend.ungroove.d/2-PRINT.fit_tolerance-(e.mswitch.screw.d/2+e.mswitch.screw.s),e.h+e.hinge.e+mshh], + end: [x,-msedge+ms.properties.microswitch.size.y,e.h+e.hinge.e+mshh], + radius: e.mswitch.screw.d/2+e.mswitch.screw.s + }); + })).subtract(CSG.cube({ // cut off excess if any + corner1:[-hhr,-msedge+ms.properties.microswitch.size.y,e.h+e.hinge.e-1], + corner2:[hhr,-msedge-1,e.h+e.hinge.e+hhh+e.mswitch.screw.d+e.mswitch.screw.s+1] + })).subtract([-msh/2,msh/2].map(function(x) { return CSG.roundedCylinder({ // screwholes + start: [x,-CONFIG.hotend.ungroove.d/2-PRINT.fit_tolerance-(e.mswitch.screw.d/2+e.mswitch.screw.s),e.h+e.hinge.e+mshh], + end: [x,-msedge+ms.properties.microswitch.size.y,e.h+e.hinge.e+mshh], + radius: e.mswitch.screw.d/2 + })})).subtract(CSG.cylinder({ // pulldown screw + start:[0,-msedge+ms.properties.microswitch.size.y+3/2/*XXX:config*/+PRINT.extrusion_width,e.h+e.hinge.e-1], + end:[0,-msedge+ms.properties.microswitch.size.y+3/2/*XXX:config*/+PRINT.extrusion_width,e.h+e.hinge.e+hhh+1], + radius: 3/2/*XXX:config*/ + })); + rv.properties.microswitch_screw_connector = new CSG.Properties(); + [-msh/2,msh/2].forEach(function(x,i) { + rv.properties.microswitch_screw_connector[i] = new CSG.Connector( + [x,-msedge,e.h+e.hinge.e+mshh], + [0,1,0], [0,0,-1] + ); + }); + return rv.setColor([0.3,0.8,0.3,0.9]); + }, + split_hinged: function effector_split_hinged(hinged) { + var e = CONFIG.effector; + var b = hinged.getBounds(); + var ymax = Math.max(Math.abs(b[0].y),Math.abs(b[1].y)); + var zmax = Math.max(b[0].z,b[1].z); + return [-1,1].map(function(s) { + return hinged.intersect(CSG.cube({ + corner1: [Math.min(b[0].x,b[1].x)-1,s*e.clamp.split/2,-zmax-1], + corner2: [Math.max(b[0].x,b[1].x)+1,s*(ymax+1),zmax+1] + })); + }); + }, + fanholder: function effector_fanholder() { + var fh = CONFIG.effector.fanholder; + var od = fh.screw.d+2*fh.screw.m; + return linear_extrude({height:fh.w},hull( + CAG.circle({center:[0,-this.rmount],radius:od/2}), + CAG.circle({center:[0,-fh.r+od/2+fh.w/2],radius:fh.w/2}) + )).translate([0,0,-fh.w]).union( + linear_extrude({height:fh.w},hull( + CAG.circle({center:[fh.w/2,-this.rmount-od/2-fh.w/2],radius:fh.w/2}), + CAG.circle({center:[od/2,-fh.r],radius:od/2}) + )).rotateY(90).translate([-fh.w/2,0,0]) + ).subtract( CSG.cylinder({ + start: [-fh.w,-fh.r,-od/2], + end: [fh.w,-fh.r,-od/2], + radius: fh.screw.d/2 + })).subtract( CSG.cylinder({ + start: [0,-this.rmount,1], + end: [0,-this.rmount,-fh.w-1], + radius: fh.screw.d/2 + })).setColor([0.3,0.8,0.3,0.9]).rotateZ(-120); + } +}; + +function columns() { + var rv = [0,1,2].map(function(x) { + return union(vector_char(0,0,String.fromCharCode('A'.charCodeAt(0)+x)).segments.map(function(x) { + return rectangular_extrude(x,{w:2,h:1}); + })).center().rotateX(90).translate([0,50,0]).rotateZ(x*120+120); + }); + return union(rv); +} + +function microswitch() { + var screw_connector = new CSG.Properties(); + var rv = CSG.cube({ center:[0,0,2.5],radius: [19.8/2,6/2,10/2] }).union( + CSG.cube({ center: [2.5,0.5,6], radius: [2/2,3.5/2,5/2] }) + ).union( + [-8,-1,8].map(function(x) { + return CSG.cube({ center:[x,0,0], radius: [0.6/2,3.2/2,13/2] }) + }) + ).subtract( + [-9.5/2,9.5/2].map(function(x,i) { + screw_connector[i] = new CSG.Connector([x,6/2,0],[0,-1,0],[0,0,1]); + return CSG.cylinder({ + start: [x,-4,0], end: [x,4,0], + radius: 2/2 + }) + }) + ); + rv.properties.switch_connector = new CSG.Connector([2.5,0.5,6+5/2],[0,0,1],[0,-1,0]); + rv.properties.screw_connector = screw_connector; + rv.properties.microswitch = new CSG.Properties(); + rv.properties.microswitch.size = new CSG.Vector3D( + 19.8,6,10 + ); + return rv; +} + +function getParameterDefinitions() { + return [{ + name: 'part', + type: 'choice', + values: ['platform', 'hinged', 'clamp', 'fanholder', 'alltogethernow'], + captions: ['Effector platform','Hinged part', 'Clamp', 'Fan holder', 'All together now!'], + caption: 'Part', + initial: 'alltogethernow' + }]; +} + +function main(params) { + var e = EFFECTOR.effector(); + var hs = E3DV6.heatsink(); + hs = hs.connectTo(hs.properties.grove_connector,e.properties.grove_connector,false,0); + var ms = microswitch(); + var hd = EFFECTOR.hinged({ + microswitch:ms,effector:e + }); + ms = ms.connectTo( + ms.properties.screw_connector[0], + hd.properties.microswitch_screw_connector[0], + false, 0); + var hdhd = EFFECTOR.split_hinged(hd); + var fh = EFFECTOR.fanholder(); + return union({ + platform: e, + hinged: hdhd[1], + clamp: hdhd[0], + fanholder: fh, + alltogethernow: [e,hdhd[0],hdhd[1], columns(),hs,ms,fh] + }[params.part||'alltogethernow']) + var rv = union( + e, + hs, + columns(), + ///hd, + hdhd[0], hdhd[1], + ms); + return rv; +} |